Herbst esplinte metálico fundido: novo modelo de confecção com Duralay

A má oclusão de Classe II é originária de vários fatores etiológicos e uma das características mais comum desta má oclusão é a retrusão mandibular3, por esse motivo, os aparelhos de avanço mandibular são eleitos para o tratamento e correção desta má oclusão. Um destes aparelhos é o Herbst, que apresenta várias formas de ancoragens na sua confecção10. Tradicionalmente, as bandas eram o sistema de ancoragem mais usado, no entanto, pela alta frequência de quebras as mesmas foram substituídas por esplinte metálico12. Esse aparelho quando confeccionado de cromo cobalto pelo método da prótese parcial removível, apresenta como desvantagens a quantidade de passos laboratoriais e a possível contração do metal, podendo ocasionar a má adaptação da estrutura metálica à boca do paciente. Dessa forma, este artigo apresenta um novo método de confecção do aparelho de Herbst esplinte metálico fundido com uso da Duralay e liga níquel cromo. Esse método diminui os passos laboratoriais, proporciona maior resistência à tração e minimiza a contração da estrutura metálica, pois a resina química Duralay proporciona menor expansão do que a cera2.

Ertty System®: distalização segmentar

Introduction: Ertty System® is an intraoral system of biomechanical forces to move teeth anteroposteriorly. The application of forces on this system results in the distalization of the molar and all lateral segment in the side to be distalized, including premolars and canine, resulting in alveolar bone remodeling. This system is indicated to correct uni- or bilateral maxillary dental Class II malocclusion in permanent dentition both in children and adults. It is contraindicated in case of skeletal asymmetries, protrusion of maxillary and mandibular teeth, skeletal Class II and Class II subdivision malocclusions with mandibular midline deviation. This study describes Ertty System® and presents two clinical cases treated using this system. The two female patients presented with Class II malocclusion subdivision and maxillary midline deviation. Results: It was achieved correct alignment and leveling, Class I dental relation and correction of upper midline. Conclusion: The success and stability of results confirmed diagnosis and treatment adequacy.

Extração de incisivo inferior: uma alternativa no tratamento da classe III

The correction of a Class III malocclusion in adult patients is one of the major challenges in orthodontics due to facial deformities occurring during the unfavorable growth of this kind of pattern, as well as the treatment options capable of producing facial changes aesthetically acceptable and adequate for today's beauty standards. One acceptable alternative treatment is the removal of a lower incisor. For a Class III correction through a lower incisor extraction a thorough analysis and planning must be carried out by taking into consideration the amount of overjet and overbite, periodontal condition of the teeth and the possibility of obtaining a good dental occlusion with acceptable facial aesthetics. Will be presented two case reports of patients presenting an anteroinferior crowding, Class III malocclusion condition. The treatment through a lower incisor extraction and the reasons why this treatment was adopted will be discussed.

Otimização do tracionamento de canino impactado pela técnica do arco segmentado: relato de caso clinico

Upper canines impaction are considered the second most frequent and are associated to important esthetics and functional limitations. Among the treatment strategies described in the literature the most commonly used are the extraction of the primary canines and the surgical exposure followed by orthodontic traction, that requires an adequate interdisciplinary approach. The aim of this case report is to draw the attention of the clinician to the possibility of adapting the segmented arch technique to manage a canine impaction clinical case.

Tratamento ortodôntico lingual individualizado com o sistema Incognito

Introduction: The orthodontic treatment using lingual brackets has been desired by adult patients for esthetic factors. In this paper it is described the clinical steps of an orthodontic treatment using Incognito™ system, individualized lingual brackets and archwires designed by CAD/CAM technology. Methods: The presented case describes the treatment of a patient with mesofacial growth pattern,Class I malocclusion, with mandibular crowding and diastema between the upper central incisors, treated using 100% individualized lingual brackets. Results: After treatment, the molar relation of Class I was kept, the spaces between upper central incisors were closed and mandibular crowding corrected. Conclusion: This case report demonstrated the efficiency of the new method for lingual orthodontic treatment.

Avaliação da via aérea superior em pacientes classe III submetidos à cirurgia ortognática: revisão de literatura

Introduction: The configuration and dimensions of the upper airway are determined by anatomical structures such as soft tissues, muscles and craniofacial skeleton, composing or surrounding the pharynx. Anatomical abnormalities of the soft tissues and / or craniofacial skeleton may become more narrow upper airway. The orthognathic surgery, which is used in the correction of dentoskeletal deformities, also causes changes in the upper airway. Objective: In view of the facts presented, this article aims to review the literature on the changes of the upper airway in patients’ class III undergoing orthognathic surgery. Methodology: International Literature on Health Sciences (Pubmed ) and Port Journals CAPES original and review published between 1990 and 2010, in two bibliographic databases articles were selected. Results: thirty-nine (39) articles were selected for writing this review. Conclusion: The upper airway deformity and dental- skeletal class III should be carefully evaluated prior to orthognathic surgery and whenever surgical planning permit should prefer the maxillary advances to mandibular setbacks

Reabilitação oral de paciente com síndrome da combinação: relato de caso

The Combination Syndrome represents an important pathologic condition of the masticatory system that requires a complex rehabilitation treatment. The presence of flaccid mucosa is one of the most common features due to bone resorption of the pre-maxilla caused by anterior hyperfunction of the mandibular teeth on the maxillary complete denture, where the impact of oclusal loading in this region results in movement of the maxillary prosthesis into the ridge, resulting in increased resorption of the residual ridge, internal misfit and loss of the retention of the maxillary complete denture. The presence of flaccid mucosa, in such cases, leads to problems of support and stability of the maxillary complete denture, which can be treated by surgical reduction of the thickness of the tissue or using specific techniques of fabrication of prostheses. This article describes the oral rehabilitation of a patient with the Combination Syndrome where the surgical reduction of flaccid mucosa was not performed, using a modified technique of functional impression in two steps, with the objective of generating forces and less distortion in flaccid mucosa during functional impression.

Prevalência de alterações locais e sistêmicas em indivíduos com disfunção temporomandibular

Temporomandibular disorder describes a variety of conditions including joint and muscle in the stomatognathic system, characterized by pain, TMJ sounds, functions irregular jaw and represent the leading cause of nondental pain in the orofacial region. The objective of this research was to evaluate the prevalence of ophthalmological, otological and cognitive-behavioral changes, parafunctional habits in individuals with temporomandibular disorders (TMD). A total of 117 medical records of female and male individuals, aged 18 to 60 years, from the Occlusion, Temporomandibular Dysfunction and Orofacial Pain of the Ribeirão Preto School of Dentistry – USP, between 2010 and 2011. The anamnesis index proposed by Helkimo was used to classify the individuals according to TMD severity degree and to divide them into two groups: AiI (mild to moderate) with 69 individuals and AiII (severe) with 48 individuals. The groups were then subdivided with respect to gender (72.64% female and 27.36% male) and age. There was predominance in the 18-40 year age group (60.68%) when compared to the 41-60 year age group (39.32%). Data were collected through an interview with questions about the presence of parafunctional habits, otological, ophthalmological and behavioral changes. Data were subjected to the statistical analysis using the Kruskal-Wallis test. The prevalence of each change was also evaluated. The results showed statistically significant for all groups according to gender, age and degree of severity. Individuals with temporomandibular disorders exhibited high prevalence of systemic and local dysfunctions.

Reabilitação estética funcional associando onlays em cerômero e resinas nanoparticuladas

Introdução: a perda da dimensão vertical de oclusão (DVO) é resultada de um grande desequilíbrio oclusal, onde não apenas a perda dos dentes pode ser o fator responsável, mas também as parafunções, entre elas, o bruxismo. O restabelecimento da relação maxilomandibular é condição necessária para que uma adequada reabilitação bucal seja executada, devolvendo, assim, função e estética perdidas. Objetivo: descrever um caso clínico de reabilitação em paciente bruxista, com presença de desgastes dentários, desgastes de tratamentos restauradores previamente existentes, fratura de onlay e bordas incisais, restabelecendo uma nova DVO por meio de onlays posteriores em cerômeros, recuperando a estética com restaurações diretas em resinas compostas nos dentes anteriores. Conclusões: a reabilitação bucal com levante de mordida em onlays devolve a DVO perdida de maneira segura.

Avaliação tomográfica no tratamento com Herbst em adulto jovem

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Dental and skeletal components of Class II open bite treatment with a modified Thurow appliance

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Lateral cephalometric diagnosis of asymmetry in Angle Class II subdivision compared to Class I and II

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Three-dimensional dental arch changes of patients submitted to orthodontic-surgical treatment for correction of Class II malocclusion

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Orofacial functions and quality of life in oral health in subjects with dentofacial deformity

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Métodos preventivos em primeiro molar permanente de crianças com experiência de cárie dentária: estudo clínico comparativo

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)