Estudo da utilização de serragem de madeira como adsorvente para o tratamento de efluentes têxteis

The Brazilian textile industry has been a highlight in the global economy. Connected with this high economic performance there is the water consumption and the generation of great volumes of wastewater which present high concentrations of dyes and chemical substances. One of the main techniques used in the treatment of textile effluents is adsorption, which has the activated carbon as the main adsorbent. Recently, studies have been developed to find alternative materials to activated carbon and exhibiting good adsorption capacity of dyes. The aim of this work is to study the potential of sawdust as adsorbent of low cost to remove the dye Direct Green 26. The results of this type of dye removal were obtained through the study of adsorption isotherms obtained by spectrophotometry in the UV-visible region analyzed by the Langmuir model. Finally, a comparison was made of these results with those of other adsorbents. Results showed that the average removal of dye, using sawdust, was 78.8% for an initial concentration of 500mg / L and the maximum adsorption capacity of 119mg / g. These results demonstrate the great potential of sawdust as an adsorbent for the dye Direct Green 26.

O clima urbano das cidades do interior do estado de São Paulo: uma análise do campo térmico de Assis, Cândido Mota, Maracaí e Tarumã

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Adsorção de metais em solução aquosa pelos processos de batelada e coluna de leito fixo utilizando silsesquioxano funcionalizado com 5-amino-1,3,4-tiadiazol-2-tiol

Pós-graduação em Ciência dos Materiais - FEIS

Secagem por atomização do suco de uva: microencapsulação das antocianinas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Estudo da formação de domínios em membranas modelos induzidos por peptídeos antimicrobianos e sua ação interfacial

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Comportamento higroscópico de partes aéreas de pimenta-de-macaco (Piper aduncum L.)

Isotermas de dessorção de pimenta-de-macaco foram determinadas pelo método gravimétrico estático nas temperaturas de 35, 45 e 55 ºC, com umidade relativa variando de 5,5-81%. Três modelos matemáticos foram aplicados para analisar os dados experimentais. O modelo de GAB modificado apresentou o melhor ajuste aos dados experimentais. O calor isostérico e a entropia diferencial foram determinados pela aplicação das equações de Clausius-Clapeyron e Gibbs-Helmholtz, respectivamente. O calor isostérico e a entropia da isoterma de dessorção apresentaram comportamento similar. A teoria da compensação entalpia-entropia foi aplicada às isotermas indicando que o mecanismo de dessorção de umidade das partes aéreas de pimenta-de-macaco é controlado pela entalpia.

Estudo da formação de domínios em membranas modelos induzidos por peptídeos antimicrobianos e sua ação interfacial

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Kinetic and Thermodynamic Studies on the Adsorption of Reactive Red 239 by Carra Sawdust Treated with Formaldehyde

In this study, carra sawdust pre-treated with formaldehyde was used to adsorb reactive red 239 (RR239). The effects of several experimental conditions, including the concentration of dye, sorbent dosage, temperature, ionic strength, stirring speed and solution pH, on the kinetics of the adsorption process have been studied, and the experimental data were fitted to pseudo-second-order model. A study of the intra-particle diffusion model indicates that the mechanism of dye adsorption using carra sawdust is rather complex and is most likely a combination of external mass transfer and intra-particle diffusion. The experimental data obtained at equilibrium were analyzed using the Langmuir and Freundlich isotherm models, and the results indicated that at this concentration range, both models can be applied for obtaining the equilibrium parameters. The maximum dye uptake obtained at 298 K was found to be 15.1 mg g(-1). In contrast to the usual systems, the reactive dye studied in the present work is strongly attached to the sawdust even after several washes with water, allowing it to be discarded as a solid waste.

Removal of Pb2+ from aqueous solutions using two Brazilian rocks containing zeolites

The removal of Pb2+ from aqueous solution by two Brazilian rocks that contain zeolites-amygdaloidal dacite (ZD) and sandstone (ZS)-was examined by batch experiments. ZD contains mordenite and ZS, stilbite. The effects of contact time, concentration of metal in solution and capacity of Na+ to recover the adsorbed metals were evaluated at room temperature (20A degrees C). The sorption equilibrium was reached in the 30 min of agitation time. Both materials removed 100% of Pb2+ from solutions at concentrations up to 50 mg/L, and at concentrations larger than 100 mg/L of Pb2+, the adsorption capacity of sandstone was more efficient than that of amygdaloidal dacite due to the larger quantities and the type of zeolites (stilbite) in the cement of this rock. All adsorbed Pb2+ was easily replaced by Na+ in both samples. The analysis of the adsorption models using nonlinear regression revealed that the Sips and the Freundlich isotherms provided the best fit for the ZS and ZD experimental data, respectively, indicating the heterogeneous adsorption surfaces of these zeolites.

Metal biosorption onto dry biomass of Arthrospira (Spirulina) platensis and Chlorella vulgaris: Multi-metal systems

Binary and ternary systems of Ni2+, Zn2+, and Pb2+ were investigated at initial metal concentrations of 0.5, 1.0 and 2.0 mM as competitive adsorbates using Arthrospira platensis and Chlorella vulgaris as biosorbents. The experimental results were evaluated in terms of equilibrium sorption capacity and metal removal efficiency and fitted to the multi-component Langmuir and Freundlich isotherms. The pseudo second order model of Ho and McKay described well the adsorption kinetics, and the FT-IR spectroscopy confirmed metal binding to both biomasses. Ni2+ and Zn2+ interference on Pb2+ sorption was lower than the contrary, likely due to biosorbent preference to Pb. In general, the higher the total initial metal concentration, the lower the adsorption capacity. The results of this study demonstrated that dry biomass of C. vulgaris behaved as better biosorbent than A. platensis and suggest its use as an effective alternative sorbent for metal removal from wastewater. (C) 2012 Elsevier B.V. All rights reserved.

Study of adsorption isotherms of green coconut pulp

Brazil is considered one of the largest producers and consumers of tropical fruits. Green coconut (Cocos nucifera L.) stands out not only for its production and consumption, but also for the high amount of waste produced by coconut water industry and in natura consumption. Therefore, there is a need for utilization of this by-product. This study aims to study the adsorption isotherms of green coconut pulp and determine its isosteric heat of sorption. The adsorption isotherms at temperatures of 30, 40, 50, 60, and 70 °C were analyzed, and they exhibit type III behavior, typical of sugar rich foods. The experimental results of equilibrium moisture content were correlated by models present in the literature. The Guggenheim, Anderson and De Boer (GAB) model proved particularly good overall agreement with the experimental data. The heat of sorption determined from the adsorption isotherms increased with the decrease in moisture content. The heat of sorption is considered as indicative of intermolecular attractive forces between the sorption sites and water vapor, which is an important factor to predict the shelf life of dried products.

Grauzonen : Funktionsweisen der Beniner Polizei und ihr Verhältnis zur Bevölkerung /// Arbeitspapiere / Institut für Ethnologie und Afrikastudien ; 133

Gewalttätig, korrupt und faul oder eher gesetzestreu, hilfsbereit und freundlich? Diese Abhandlung befasst sich mit der Arbeitsweise der Beniner Polizei und den Bildern, die sie von sich erzeugt und den Eindrücken, die sie bei den Bürgern hinterlässt. Die Arbeit liefert Erkenntnisse über den Aufbau und die Arbeitsweise der Beniner Polizei. Sie verweist auch auf das Konkurrenzverhältnis der Polizei zu anderen Sicherheitskräften, wie etwa der Gendarmerie und sie zeigt, dass sich die Polizeirnin diversen Grauzonen – der Legalität, der Staatlichkeit und der Formalität – bewegt. Informelle Strategien, schleichende Privatisierung und Korruption sichern in einem gewissen Rahmen das Funktionieren der Institution. Diese Schwächen der Institution haben jedoch negative Auswirkungen auf das Bild der Polizei und ihr Verhältnis zu den Bürgern. Nicht das propagierte Ideal einer Polizei, sondern die realen Interaktionen mit ihr dominieren die Wahrnehmung der Bürger von der Organisation.

Characterization of hydrothermal carbonization products from woodchip

L’idrotermocarbonizzazione è un processo che permette di convertire un’elevata quantità di materie prime solide in carbone. Ciò viene realizzato inserendo come sostanza in input, oltre alla materia prima iniziale, acqua liquida e, successivamente, riscaldando fino a 180°C, temperatura alla quale inizia la reazione esotermica ed il processo diventa di tipo stand-alone. Tale reazione presenta un tempo di reazione variabile nel range di 4÷12 h. I prodotti in uscita sono costituiti da una sostanza solida che ha le caratteristiche del carbone marrone naturale e un’acqua di processo, la quale è altamente inquinata da composti organici. In questo elaborato viene illustrata una caratterizzazione dei prodotti in uscita da un impianto di idrotermo carbonizzazione da laboratorio, il quale utilizza in input pezzi di legno tagliati grossolanamente. Inizialmente tale impianto da laboratorio viene descritto nel dettaglio, dopodiché la caratterizzazione viene effettuata attraverso DTA-TGA dei materiali in ingresso ed uscita; inoltre altre sostanze vengono così analizzate, al fine di confrontarle col char ed i pezzi di legno. Quindi si riporta anche un’analisi calorimetrica, avente l’obiettivo di determinare il calore di combustione del char ottenuto; attraverso questo valore e il calore di combustione dei pezzi di legno è stato possibile calcolare l’efficienza di ritenzione energetica del processo considerato, così come la densificazione energetica riscontrata nel materiale in uscita. In aggiunta, è stata eseguita un’analisi delle specie chimiche elementari sul char ed il legno in modo da determinare i seguenti parametri: fattori di ritenzione e fattori di ritenzione pesati sulla massa in termini di concentrazione di C, H, N e S. I risultati ottenuti da tale analisi hanno permesso di effettuare una caratterizzazione del char. Un tentativo di attivazione del char viene riportato, descrivendo la procedura di attivazione seguita e la metodologia utilizzata per valutare il buon esito o meno di tale tentativo di attivazione. La metodologia consiste di uno studio isotermo dell’adsorbimento di acido acetico sul char “attivato” attraverso una titolazione. I risultati sperimentali sono stati fittati usando le isoterme di Langmuir e Freundlich e confrontati con le capacità di adsorbimento del semplice char e di un campione di carbone attivo preso da un’azienda esterna. Infine si è considerata l’acqua di processo, infatti un’analisi fotometrica ne ha evidenziato le concentrazioni di TOC, COD, ioni nitrato e ioni fosfato. Questi valori sono stati conseguentemente confrontati con i limiti italiani e tedeschi massimi ammissibili per acque potabili, dando quindi un’idea quantitativa della contaminazione di tale acqua di processo.

Diffusion of HTO, Br-, I-, Cs+, Sr-85(2+) and Co-60(2+) in a clay formation: Results and modelling from an in situ experiment in Opalinus Clay

The migration of radioactive and chemical contaminants in clay materials and argillaceous host rocks is characterised by diffusion and retention processes. Valuable information on such processes can be gained by combining diffusion studies at laboratory scale with field migration tests. In this work, the outcome of a multi-tracer in situ migration test performed in the Opalinus Clay formation in the Mont Terri underground rock laboratory (Switzerland) is presented. Thus, 1.16 x 10(5) Bq/L of HTO, 3.96 x 10(3) Bq/L of Sr-85, 6.29 x 10(2) Bq/L of Co-60, 2.01 x 10(-3) mol/L Cs, 9.10 x 10(-4) mol/L I and 1.04 x 10(-3) mol/L Br were injected into the borehole. The decrease of the radioisotope concentrations in the borehole was monitored using in situ gamma-spectrometry. The other tracers were analyzed with state-of-the-art laboratory procedures after sampling of small water aliquots from the reservoir. The diffusion experiment was carried out over a period of one year after which the interval section was overcored and analyzed. Based on the experimental data from the tracer evolution in the borehole and the tracer profiles in the rock, the diffusion of tracers was modelled with the numerical code CRUNCH. The results obtained for HTO (H-3), I- and Br- confirm previous lab and in situ diffusion data. Anionic fluxes into the formation were smaller compared to HTO because of anion exclusion effects. The migration of the cations Sr-85(2+), Cs+ and Co-60(2+) was found to be governed by both diffusion and sorption processes. For Sr-85(2+), the slightly higher diffusivity relative to HTO and the low sorption value are consistent with laboratory diffusion measurements on small-scale samples. In the case of Cs+, the numerically deduced high diffusivity and the Freundlich-type sorption behaviour is also supported by ongoing laboratory data. For Co, no laboratory diffusion data were yet available for comparison; however, the modelled data suggests that Co-60(2+) sorption was weaker than would be expected from available batch sorption data. Overall, the results demonstrate the feasibility of the experimental setup for obtaining high-quality diffusion data for conservative and sorbing tracers. (C) 2007 Elsevier Ltd. All rights reserved.