Catalytic upgrading of carboxylic acids and esters to bio fuels and bio chemicals

The research activity was focused on the transformation of methyl propionate (MP) into methyl methacrylate (MMA), avoiding the use of formaldehyde (FAL) thanks to a one-pot strategy involving in situ methanol (MeOH) dehydrogenation over the same catalytic bed were the hydroxy-methylation/dehydration of MP with FAL occurs. The relevance of such research line is related to the availability of cheap renewable bio-glycerol from biodiesel production, from which MP can be obtained via a series of simple catalytic reactions. Moreover, the conventional MMA synthesis (Lucite process) suffers from safety issues related to the direct use of carcinogenic FAL and depends on non-renewable MP. During preliminary studies, ketonization of carboxylic acids and esters has been recognized as a detrimental reaction which hinders the selective synthesis of MMA at low temperature, together with H-transfer hydrogenation with FAL or MeOH as the H-donor at higher temperatures. Therefore, ketonization of propionic acid (PA) and MP was investigated over several catalysts (metal oxides and metal phosphates), to obtain a better understanding of the structure-activity relationship governing the reaction and to design a catalyst for MMA synthesis capable to promote the desired reaction while minimizing ketonization and H-transfer. However, ketonization possesses scientific and industrial value itself and represents a strategy for the upgrade of bio oils from fast pyrolysis of lignocellulosic materials, a robust and versatile technology capable to transform the most abundant biomass into liquid biofuels. The catalysts screening showed that ZrO2 and La2O3 are the best catalysts, while MgO possesses low ketonization activity, but still, H-transfer parasitic hydrogenation of MMA reduces its yield over all catalysts. Such study resulted in the design of Mg/Ga mixed oxides that showed enhanced dehydrogenating activity towards MeOH at low temperatures. It was found that the introduction of Ga not only minimize ketonization, but also modulates catalyst basicity reducing H-transfer hydrogenations.

Upgrading Bio-Platform Molecules in the Gas-Phase: From Levulinic Acid to Bio-Chemicals

Levulinic acid (LA) is a polyfunctional molecule obtained from biomass. Because of its structure, the United States Department of energy classified LA as one of the top 12 building block chemicals. Typically, it is valorized through chemical reduction to γ-valerolactone (GVL). It is usually done with H2 in batch systems with high H2 pressures and noble metal catalysts, making it expensive and less applicable. Therefore, alternative approaches such as catalytic transfer hydrogenation (CTH) through the Meerwein–Ponndorf–Verley (MPV) reaction over heterogeneous catalysts have been studied. This uses organic molecules (alcohols) which act as a hydride transfer agent (H-donor), to reduce molecules containing carbonyl groups. Given the stability of the intermediate, reports have shown the batch liquid-phase CTH of levulinate esters with secondary alcohols, and remarkable results (GVL yield) have been obtained over ZrO2, given the need of a Lewis acid (LASites) and base pair for CTH. However, there were no reports of the continuous gas-phase CTH of levulinate esters. Therefore, high surface area ZrO2 was tested for gas-phase CTH of methyl levulinate (ML) using ethanol, methanol and isopropanol as H-donors. Under optimized conditions with ethanol (250 ℃), the reaction is selective towards GVL (yield 70%). However, heavy carbonaceous materials over the catalyst surface progressively blocked LASites changing the chemoselectivity. The in situ regeneration of the catalyst permitted a partial recovery of the LASites and an almost total recovery of the initial catalytic behavior, proving the deactivation reversible. Tests with methanol were not promising (ML conversion 35%, GVL yield 4%). As expected, using isopropanol provided complete conversion and a GVL yield of 80%. The reaction was also tested using bioethanol derived from agricultural waste. In addition, a preliminary study was performed for the hydrogenolysis of polyols to produce bioethanol, were Pd-Fe catalyst promoted the ethanol selective (37%) hydrogenolysis of glycerol.

Open-cell Metallic Foams for the Electrochemical Conversion of Biomass-derived Compounds

The electrochemical conversion is a sustainable way for the production of added-value products, operating in mild conditions, using in-situ generated hydrogen/oxygen by water and avoiding the use of high H2/O2 pressures. The aim of this work is to investigate the electrocatalytic conversion of 5-hydroxymetilfurfural (HMF) and D-glucose, in alkaline media, using metallic open-cell foams based-catalysts. The electrochemical hydrogenation of HMF to 2,5-bis(hydroxymethyl)furan (BHMF) was performed using nanostructured Ag, deposited by galvanic displacement (GD) or electrodeposition (ED), on Cu foam, obtaining AgCu bimetallic nanoparticles (ED) or dendrites (GD) which enhanced electroactive surface area, charge and mass transfer, than bare foams. In diluted 0.02M HMF solutions, Ag/Cu samples selectively produce BHMF; the large surface area enhanced the productivity, compared to their 2D counterparts. Furthermore, at more concentrated solutions (0.05 – 0.10M) a gradually decrease of selectivity is observed. The performances of the electrodes is stable during the catalytic tests but a Cu-enrichment of particles occurred. The performances of Ni foam-based catalysts, obtained by calcination of Ni foam or by electrodeposition of Ni-hydroxide/Ni and Ni particle/Ni, were firstly investigated for the selective electrochemical oxidation of D-glucose toward gluconic acid (GO) and glucaric acid (GA). Then, the calcined catalyst was chosen to study the influence of the reaction conditions on the reaction mechanism. The GO and GA selectivities increase with the charge passed, while the formation of by-products from C-C cleavage/retro-aldol process is maximum at low charge. The fructose obtained from glucose isomerization favours the formation of by-products. The best glucose/NaOH ratio is between 0.5 and 0.1: higher values suppress the OER, while lower values favour the formation of low molecular weight products. The increases of the potential enhance the GO selectivity, nevertheless higher GA selectivity is observed at 0.6 – 0.7V vs SCE, confirmed by catalytic test performed in gluconate (30-35% GA selectivity).

Motion Cueing Algorithm Development in a 2DOF Driving Simulator: a Driving Behaviour-Centered Approach

I simulatori di guida sono strumenti altamente tecnologici che permettono di svolgere attività di ricerca in vari ambiti quali la psicologia, la medicina e l’ingegneria. Tuttavia, affinché i dati ottenuti mediante le simulazioni siano rapportabili alla loro controparte reale, la fedeltà delle componenti del simulatore di guida deve essere elevata. Questo lavoro tratta del miglioramento del sistema di restituzione del movimento nel simulatore a due gradi di libertà (2DOF) SIMU-LACET Driving Simulator, costruito e sviluppato presso il laboratorio LEPSIS dell’IFSTTAR (Istituto Francese delle Scienze e Tecnologie dei Trasporti, dello Sviluppo e delle Reti), in particolare nella sua sede di Parigi – Marne-la-Vallée. Si è deciso di andare a riprogettare la parte software del sistema di restituzione del movimento (motion cueing), operando su due elementi principali: lo scale factor (fattore di scala) applicato agli impulsi dinamici provenienti dal modello veicolare e i Motion Cueing Algorihms (MCA, algoritmi di restituzione del movimento), questo per entrambi i gradi di libertà. Si è quindi intervenuti sul modello esistente implementato in MATLAB-Simulink nello specifico blocco del motion cueing sul surge (traslazione longitudinale) e sul yaw (imbardata). Riguardo lo scale factor, è stata introdotta una metodologia per creare uno scale factor non lineare in forma esponenziale, tale da migliorare la restituzione degli impulsi meno ampi, pur rispettando i limiti fisici della piattaforma di movimento. Per quanto concerne il MCA, si sono vagliate diverse transfer function dell’algoritmo classico. La scelta finale dei MCA e la validazione del motion cueig in genere è stata effettuata mediante due esperimenti ed il giudizio dei soggetti che vi hanno partecipato. Inoltre, in virtù dei risultati del primo esperimento, si è investigata l’influenza che la strategia in merito al cambio delle marce avesse sulla percezione del movimento da parte del guidatore.

Sviluppo di materiali compositi a base di Aquivion® PFSA per la valorizzazione catalitica del furfuril alcol

L'elaborato di tesi si è posto l'obiettivo di studiare la sintesi e l'attività catalitica di diversi materiali compositi a base di Aquivion, resina pefluorosolfonica dalle caratteristiche superacide, e vari ossidi su una reazione di valorizzazione catalitica del furfuril alcol. I test catalitici sono stati inizialmente svolti allo scopo di determinare l'influenza delle caratteristiche del catalizzatore e delle condizioni operative. La comparazione dei risultati ottenuti ha successivamente permesso di trarre ulteriori informazioni interessanti sul meccanismo di reazione. In particolare, le proprietà superficiali degli ossidi indagati hanno giocato un ruolo determinante per la generazione di acqua a partire dal solvente alcolico, acqua che è risultata fondamentale per alcuni step della reazione.

Catalytic reduction of levulinic acid derivatives to bio-fuel components

Levulinic Acid and its esters are polyfunctional molecules obtained by biomass conversion. The most investigated strategy for the valorization of LA is its hydrogenation towards fuel additives, solvents and other added-value bio-based chemicals and, in this context, heterogeneous and homogeneous catalysts are widely used. Most commonly, it is typically performed with molecular hydrogen (H2) in batch systems, with high H2 pressures and noble metal catalysts. Several works reported the batch liquid-phase hydrogenation of LA and its esters by heterogenous catalysts which contained support with Brønsted acidity in order to obtain valeric acid and its esters. Furthermore, bimetallic and monometallic systems composed by both a metal for hydrogen activation and a promoter were demonstrated to be suitable catalysts for reduction of carboxylic group. However, there were no studies in the literature reporting the hydrogenation of alkyl levulinates to 1-pentanol (1-PAO). Therefore, bimetallic and monometallic catalysts were tested for one-pot hydrogenation of methyl levulinate to 1-PAO. Re-based catalysts were investigated, this way proving the crucial role of the support for promoting the ring-opening of GVL and its consecutive reduction to valeric compounds. All the reactions were performed in neat without the need of any additional solvents. In these conditions, bimetallic Re-Ru-O/HZSM-5 afforded methyl valerate and valeric acid (VA) with a productivity of 512 mmol gmetal-1 h-1, one of the highest reported in literature to date. Rhenium can also promote the reduction of valeric acid/esters to PV through the formation of 1-pentanol and its efficient esterification/transesterification with the starting material. However, it was proved that Re-based catalysts may undergo leaching of active phase in presence of carboxylic acids, especially by working in neat with VA. Furthermore, the over-reduction of rhenium affects catalytic performance, suggesting not only that a pre-reduction step is unnecessary but also that it could be detrimental for catalyst’s activity.

Development of processes for the valorization of lignocellulosic biomass based on renewable energies

The world grapples with climate change from fossil fuel reliance, prompting Europe to pivot to renewable energy. Among renewables, biomass is a bioenergy and bio-carbon source, used to create high-value biomolecules, replacing fossil-based products. Alkyl levulinates, derived from biomass, hold promise as bio-additives and biofuels, especially via acid solvolysis of hexose sugars, necessitating further exploration. Alkyl levulinate's potential extends to converting into γ-valerolactone (GVL), a bio-solvent produced via hydrogenation with molecular-hydrogen. Hydrogen, a key reagent and energy carrier, aids renewable energy integration. This thesis delves into a biorefinery system study, aligning with sustainability goals, integrating biomass valorization, energy production, and hydrogen generation. It investigates optimizing technologies for butyl levulinate production and subsequent GVL hydrogenation. Sustainability remains pivotal, reflecting the global shift towards renewable and carbon bio-resources. The research initially focuses on experimenting with the optimal technology for producing butyl levulinate from biomass-derived hexose fructose. It examines the solvolysis process, investigating optimal conditions, kinetic modeling, and the impact of solvents on fructose conversion. The subsequent part concentrates on the technological aspect of hydrogenating butyl levulinate into GVL. It includes conceptual design, simulation, and optimization of the fructose-to-GVL process scheme based on process intensification. In the final part, the study applies the process to a real case study in Normandy, France, adapting it to local biomass availability and wind energy. It defines a methodology for designing and integrating the energy-supply system, evaluating different scenarios. Sustainability assessment using economic, environmental, and social indicators culminates in an overall sustainability index, indicating scenarios integrating the GVL biorefinery system with wind power and hydrogen energy storage as promising due to high profitability and reduced environmental impact. Sensitivity analyses validate the methodology's reliability, potentially extending to other technological systems.

Studio della reazione di hydrogen-transfer di metil levulinato con etanolo in fase vapore: effetto del palladio supportato su catalizzatori contenenti zirconio

La valorizzazione di biomasse lignocellulosiche rappresenta la strada che la chimica può percorrere per svincolarsi dalle fonti fossili e virare verso un futuro incentrato sulla sostenibilità ambientale. In quest’ottica, l’acido levulinico (AL) e i suoi esteri, detti alchil levulinati, ottenibili dalla valorizzazione di biomasse di scarto, rappresentano una classe di composti di grande interesse industriale. Infatti, dalla loro riduzione è possibile ottenere g-valerolattone (GVL), un’importante molecola piattaforma per l’industria chimica, o alchil valerati, composti interessanti per diverse branche dell’industria chimica e per la formulazione di bio-carburanti. Già da tempo è nota la possibilità di effettuare la riduzione di AL in fase liquida in presenza di alcoli come H-Donor secondo un meccanismo detto Catalytic Transfer Hydrogenation che può essere promosso da ossido di zirconio (ZrO2). Recentemente, è stato ottimizzato un processo che impiega i reagenti appena citati in un reattore continuo operante in fase gassosa con ZrO2 come catalizzatore. In questo lavoro, si è dopato tale sistema catalitico con palladio, al fine di promuovere le reazioni di riduzione consecutiva al GVL e si sono ottimizzati i parametri operativi come tempo di contatto, temperatura e rapporto tra substrato e H-Donor.

Studio di ossidi misti Ti/Zr/O per la valorizzazione catalitica di furfurale a GVL in un reattore continuo in fase liquida

Il cambiamento climatico è una delle sfide più ardue che il nostro pianeta abbia mai dovuto affrontare. Negli ultimi anni si sta rendendo sempre più evidente la necessità di un profondo cambiamento ideologico e sociale in ogni campo. La Green Chemistry mira a capeggiare questo cambiamento proponendo dei principi guida in modo da indirizzare la chimica verso tale traguardo. Possibili strumenti attuativi di questa visione sono senza alcun dubbio le bioraffinerie. Raffinerie appunto, nate però per processare materie prime provenienti da fonti rinnovabili, le biomasse. Esistono diversi tipi di biomasse, dalle quali possono essere ricavate differenti molecole piattaforma. La biomassa lignocellulosica, per esempio, viene sfruttata per ottenere perlopiù composti furanici. Tra questi di particolare interesse è la furfurale(FUR), un’aldeide particolarmente reattiva dalla quale possono essere ottenute numerose sostanze chimiche ad alto valore aggiunto. Tra queste si trova il γ-valerolattone(GVL), estere ciclico a cinque atomi di carbonio, promettente prodotto preliminare nella sintesi di combustibili a base biologica e prodotti chimici di base. Il processo che porta dalla FUR al GVL comprende diversi step di reazione, alcuni catalizzati da acidità di Lewis, altri da acidità di Brønsted. Gli step di riduzione possono essere eseguiti mediante una reazione di Catalytic Transfer Hydrogenation (CTH) utilizzando isopropanolo piuttosto che H2 gassoso. La scelta del solvente/riducente assieme all’utilizzo di un sistema catalitico eterogeneo permettono la realizzazione della reazione con un basso impatto ambientale. Per quanto riguarda la scelta del sistema catalitico, particolarmente interessante è la combinazione TiO2-ZrO2. Lo scopo di questa tesi è stato quello di sintetizzare e valutare le performance di sistemi catalitici a base di ossidi misti Ti/Zr/O con diverse composizioni nella conversione della FUR a GVL in un reattore in fase liquida.

Study of risky situations using experimental data coming from an instrumented bicycle

The aim of this master’s thesis is to study the risky situations of the cyclist when they interact with road infrastructure and other road users as well as the influence of speed on safety. This research activity is linked with the SAFERUP (Sustainable, Accessible, Resilient, and Smart Urban Pavement) European funded project where one of the doctoral candidate has performed experiments on the bicycle simulation at the Gustave Eiffel university in the PICS-L laboratory (Paris) and instrumented bicycle at the Stockholm (Sweden). The approach of the experiment was to hire a number of people who have participated in the riding of the Instrumented bicycle (Stockholm) and bicycle simulator (PICS-L) which were developed by attaching different sensors and devices to measure important parameters of the bicycle riding and their data was collected to analysis in order to understand the behavior of the cyclist to improve the safety. In addition, a mobile eye tracker wore by participants to record the real experiment scenario, and after the end of the trip, each participant shared their remarks regarding their experience of bicycle riding according to different portions of the road infrastructure. In this research main focus is to analyze the relevant data such as speed profiles, video recordings and questionnaire surveys from the instrumented bicycle experiment. In fact, critical situations, where there was a higher probability, were compared with the subjective evaluation of the participant to be conscious of the issues related to the safety and comfort of the cyclist in different road characteristics.

Thermodynamics of hydrogen absorption in Mg thin films and multilayers studied by electrochemical method

Electrochemical hydrogen loading is a technique used to produce and study the hydrogenation in metals starting from a liquid solution containing water. It is a possible alternative to another, well-established technique which loads hydrogen starting from its gas phase. In this work, the electrochemical method is used to understand the fundamental thermodynamics of hydrogen loading in constraint systems such as thin films on substrates, and possibly distinguish the role of interfaces, stresses and microstructure during the hydrogenation process. The systems under study are thin films of Pd, Mg/Pd, and Ti/Mg multilayers. Possible future technological applications may be in the field of hydrogen storage and hydrogen sensors. Towards the end, the experimental setup is modified by introducing an automatic relay. This change leads to improvements in the data analysis and in the attainable information on the kinetics of the systems.