Blade design and forming for fans using finite elements

The necessity of adapting the standardized fan models to conditions of higher temperature has emerged due to the growth of concerning referring to the consequences of the gas expelling after the Mont Blanc tunnel accident in Italy and France, where even though, with 100 fans in operation, 41 people died. However, since then, the defied solutions have pointed to aerodynamic disadvantages or have seemed nonappropriate in these conditions. The objective of this work is to present an alternative to the market standard fans considering a new technology in constructing blades. This new technology introduces the use of the stainless steel AISI 409 due to its good adaptation to temperatures higher than 400°C, particularly exposed to temperatures of gas exhaust from tunnels in fire situation. Furthermore, it presents a very good resistance to corrosion and posterior welding and pressing, due to its alloyed elements. The innovation is centered in the process of a deep drawing of metallic shells and posterior welding, in order to keep the ideal aerodynamic superficies for the fan ideal performance. On the other hand, the finite element method, through the elasto-plastic software COSMOS permitted the verification of the thickness and structural stability of the blade in relation to the aerodynamic efforts established in the project. In addition, it is not advisable the fabrication of blades with variable localized thickness not even, non-uniform ones, due to the verified concentration of tensions and the difficulties observed in the forming. In this way, this study recommends the construction of blades with uniform variations of thickness. © 2007 Springer.

Diques clásticos na formação corumbataí (p) no nordeste da bacia do paraná, SP: Análise sistemática e significações estratigráficas, sedimentológicas e tectônicas

This paper aims to present the results of systematic survey on clastic dykes in the Corumbataí Formation (Permian), in the northeast region of the State of São Paulo. Besides this, the paper analyses genetic aspects of those features as well as their stratigraphic and sedimentologic implications in terms of geologic evolution of the northeastern Paraná Sedimentary Basin during Permian times. The field works had been developed in 3 main Corumbataí Formation outcrops (2 road cuts and a quarry) supposed to show the most important clastic dikes occurrences in the studied area. Basically, the sedimentary intrusions are formed by fine sand or silt size particles and had penetrated host rocks as near-vertical, centimeter thick, dykes (most common form) or as horizontal sheets, forming clastic sills (subsidiary form), both with variable geometric forms and dimensions. A lot of dyke walls show undulations suggesting pre-diagenetic clastic intrusions, probably near the ancient depositional surface. Almost all intrusions occur in the superior third portion of the Corumbataí Formation and some similar features seem to appear in the adjoining superposed Pirambóia Formation base. In this article the authors defend a seismic origin hypothesis for the clastic intrusions. It is important to mention that clastic intrusions tend to occur linked to expressive seismic events, with magnitude upper to 5. The analysis of isopach maps of the Permian and Mesozoic units of the Paraná Sedimentary Basin in the study area suggests a depositional system changing, from epicontinental sea conditions to shallow platform and, finally, to coastal deserts. Probably, this environmental change was driven by regional uplift accompanied by seismic events. It is possible that ancient seismicity triggered liquefaction processes and the resulting clastic intrusions. In this sense, those clastic features might be properly namedseismites.

Verruciform xanthoma located in anterior gingival

Verruciform xanthoma (VX) is a relatively rare benign lesion and oral predominantly, which occasionally affects skin and genital mucosa. It appears as a papule or single plaque showing a verrucous or papillomatous aspect, with variable color from reddish pink to gray. In majority of oral cases, it affects gingiva and alveolar mucosa such a solitary lesion. Histopathological findings are foamy histiocytes within elongated dermal papillae. Treatment consists of conservative excision surgery and recurrence is rare. A clinical case is reported, located in anterior gingiva, showing good prognosis, without recurrence. There was no concomitant oral lesion associated. Local trauma was the only possibility suggested to be related to etiology. No relevant alterations in laboratory exams (hemogram, total cholesterol, HDL, LDL, VLDL, glycose and glycolized hemoglobin) were found. The origin of the lesion remains unclear and investigation for possible associations with other lesions that could present greater risk of carcinogenesis is required. © Medicina Oral S.L.

Alterations in levels of NPK, electrical conductivity and pH of substrate, in cultivation of peppers

The objective of this work was to evaluate the chemical alterations of the substrate in the cultivation of pepper in coconut husk fiber, in a protected environment. Initially, 160 pepper plants ('Eppo') were divided into four blocks, where two pots per block were analyzed every 21 days after transplanting. The cultivation of pepper was carried out in plastic pots of 13 L, containing coconut husk fiber, and placed in double rows with a spacing of 0.5×0.8 m between single rows and 1.10 m between double rows. After removal of the plants from the pots, individual samples of substrate (approximately 1 L) were collected from each pot and dried at ambient temperature. Electrical conductivity (EC), pH, and levels of NH4 +-N, NO3 -, P and K were determined for all periods of the cultivation. These analyses were performed using the method of extraction 1:1.5 v/v. For the conditions which the experiment was conducted, there was an increase in substrate EC, as well as in the levels of nitrogen, phosphorus and potassium.

Chemical alterations of substrate in the cultivation of peppers

The objective of this study was to evaluate the chemical alterations of the substrate in the cultivation of peppers grown in coconut husk fiber, in a protected environment. Initially, 160 pepper plants ('Eppo') were divided into four blocks, where two pots per block were analyzed every 21 days after transplanting. The cultivation of pepper was carried out in plastic pots of 13 L, containing coconut husk fiber, and placed in double rows with a spacing of 0.5×0.8 m between single rows and 1.10 m between double rows. After removal of the plants from the pots, individual samples of substrate (approximately 1 L) were collected from each pot and dried at ambient temperature. The levels of Ca, Mg, S, Cl, Na, B, Fe, Mn, Cu and Zn were determined for all periods of the cultivation. These analyses were performed using the method of extraction 1:1.5 v/v. There was an increase in the levels of all the nutrients evaluated. Further studies should be conducted to develop a better nutrient solution.

Model to increase the lateral line length of drip irrigation systems

Non-pressure compensating drip hose is widely used for irrigation of vegetables and orchards. One limitation is that the lateral line length must be short to maintain uniformity due to head loss and slope. Any procedure to increase the length is appropriate because it represents low initial cost of the irrigation system. The hypothesis of this research is that it is possible to increase the lateral line length combining two points: using a larger spacing between emitters at the beginning of the lateral line and a smaller one after a certain distance; and allowing a higher pressure variation along the lateral line under an acceptable value of distribution uniformity. To evaluate this hypothesis, a nonlinear programming model (NLP) was developed. The input data are: diameter, roughness coefficient, pressure variation, emitter operational pressure, relationship between emitter discharge and pressure. The output data are: line length, discharge and length of the each section with different spacing between drippers, total discharge in the lateral line, multiple outlet adjustment coefficient, head losses, localized head loss, pressure variation, number of emitters, spacing between emitters, discharge in each emitter, and discharge per linear meter. The mathematical model developed was compared with the lateral line length obtained with the algebraic solution generated by the Darcy-Weisbach equation. The NLP model showed the best results since it generated the greater gain in the lateral line length, maintaining the uniformity and the flow variation under acceptable standards. It had also the lower flow variation, so its adoption is feasible and recommended.

In vitro comparisons of casting retention on implant abutments among commercially available and experimental castor oil-containing dental luting agents

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Produção de bovinos de corte em pastagem de aveia preta e azevém submetida à adubação nitrogenada

We evaluated animal production on black oats (Avena strigosa Schreb.) and italian ryegrass (Lolium multiflorum) pasture submitted to nitrogen top fertilization of 0; 150 and 300 kg ha-1, in the form of urea. We used 36 calves with average age and average weight of 10.5 months and 180 kg, respectively, as test-animals. The grazing system used was continuous with variable stocking rate. The block design was completely randomized with three replicates (paddock). Average weight gain was similar for the levels evaluated (0.925; 0.969 and 1.045 kg day-1, respectively). Stocking rate and live weight gain per hectare showed a linear relation with nitrogen levels. The efficiency of animal production was 2.040 and 1.766 kg of weight gain per kg of nitrogen used for the dose of 150 and 300 of N, respectively. The stocking rate and live weight gain per hectare of beef calves increased with the nitrogen levels, from 0 to 300 kg of N ha-1. However, the best efficiency in weight gain per unit of nitrogen applied was obtained with the dose of 150 kg of N ha-1.

Teor de clorofila, danos oxidativos e qualidade de sementes de soja

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Controle com Estrutura Variável e Modos Deslizantes Aplicado em Sistema de Suspensão Ativa

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Um novo sistema de refrigeração com controle de temperatura, compressor aberto, máquina de indução trifásica com velocidade variável e correção ativa do fator de potência do estágio de entrada

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Caracterização de solos sob diferentes ambientes na região Sul do Amazonas

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Perfil radial e uniformidade de precipitação do aspersor NaanDanJain 427, em função do defletor de ajuste

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Número do tipo ponto flutuante com precisão estendida

Pós-graduação em Engenharia Mecânica - FEIS

Restabelecimento funcional do tendão extensor digital longo submetido à tenectomia em eqüinos: observação macroscópica, ultra-sonográfica e histopatológica

Pós-graduação em Medicina Veterinária - FMVZ