Development of new membranes based on ionic liquid materials for gas separation

In the field of energy, natural gas is an essential bridge to a clean, low carbon, renewable energy era. However, natural gas processing and transportation regulation require the removal of contaminant compounds such as carbon dioxide (CO2). Regarding clean air, the increasing atmospheric concentrations of greenhouse gases, specifically CO2, is of particular concern. Therefore, new costeffective, high performance technologies for carbon capture have been researched and the design of materials with the ability to efficiently separate CO2 from other gases is of vital importance.(...)

An integrated approach to Physcomitrella patens transcriptomics reveals importantclues of the evolutionary development of plant organs and sexual reproduction

Land plant evolution required the generation of a new body plan that could resist the harsher and fluctuating environmental conditions found outside of aquatic environments. Unraveling the genetic basis of plant developmental innovations is not only revealing in terms of an evolutionary point of view, but it is also important for understanding the emergence of agronomically important traits. Comparative genetic studies between basal and modern land plants, both at the genome and trancriptome levels, can help in the generation of hypotheses related to the genetic basis of plant evolutionary development.(...)

Development of cognitive abilities of children infected with helminths through health education

INTRODUCTION: The aim of this study was to evaluate the effect of health education in learning and cognitive development of children infected, previously treated in an endemic area for helminthiasis. METHODS: It is a longitudinal, experimental, with random allocation of participants. The study included 87 children of both sexes enrolled in the school hall of Maranhão, State of Minas Gerais, Brazil, and divided into two groups: intervention and control. Initially the children were submitted to the parasitological fecal examination for infection diagnosis and, when positive, they were treated. For the data collection, a structured questionnaire and the psychological tests Raven, Wisc-III and DAP III were applied, before and after the educational intervention. For the group comparison, the Mann Whitney test was used, and established significance level of 5%. RESULTS: It was found that previously infected children who received the educational intervention, children showed higher performance than the control group in strutured questionnaire (p<0.05). CONCLUSIONS: It is acceptable to suppose the positive influence and the importance in the use of educational interventions in the cognitive recovery and learning of children previously treated with anthelmintics.

Development of 3D in vitro models for prediction of hepatic metabolism and toxicity

The development of human cell models that recapitulate hepatic functionality allows the study of metabolic pathways involved in toxicity and disease. The increased biological relevance, cost-effectiveness and high-throughput of cell models can contribute to increase the efficiency of drug development in the pharmaceutical industry. Recapitulation of liver functionality in vitro requires the development of advanced culture strategies to mimic in vivo complexity, such as 3D culture, co-cultures or biomaterials. However, complex 3D models are typically associated with poor robustness, limited scalability and compatibility with screening methods. In this work, several strategies were used to develop highly functional and reproducible spheroid-based in vitro models of human hepatocytes and HepaRG cells using stirred culture systems. In chapter 2, the isolation of human hepatocytes from resected liver tissue was implemented and a liver tissue perfusion method was optimized towards the improvement of hepatocyte isolation and aggregation efficiency, resulting in an isolation protocol compatible with 3D culture. In chapter 3, human hepatocytes were co-cultivated with mesenchymal stem cells (MSC) and the phenotype of both cell types was characterized, showing that MSC acquire a supportive stromal function and hepatocytes retain differentiated hepatic functions, stability of drug metabolism enzymes and higher viability in co-cultures. In chapter 4, a 3D alginate microencapsulation strategy for the differentiation of HepaRG cells was evaluated and compared with the standard 2D DMSO-dependent differentiation, yielding higher differentiation efficiency, comparable levels of drug metabolism activity and significantly improved biosynthetic activity. The work developed in this thesis provides novel strategies for 3D culture of human hepatic cell models, which are reproducible, scalable and compatible with screening platforms. The phenotypic and functional characterization of the in vitro systems performed contributes to the state of the art of human hepatic cell models and can be applied to the improvement of pre-clinical drug development efficiency of the process, model disease and ultimately, development of cell-based therapeutic strategies for liver failure.

HAART: a risk factor for development of porphyria cutanea tarda?

Porphyria cutanea tarda (PCT) is caused by inherited or acquired partial deficiency of the uroporphyrinogen-decarboxylase (Uro-D) enzyme activity. It is the most common form of porphyria. The main triggering factors to the development of porphyria cutanea tarda are alcohol, hepatitis C virus and human immunodeficiency virus. There are several reports of PCT associated with drugs, among them, antiretroviral therapy. We describe three HIV-positive patients, which showed photosensitivity as well as the emergence of tense blisters on sun-exposed areas during the use of highly active antiretroviral therapy (HAART) and discuss the possibility of PCT after the use of these drugs by those patients.

Development of duplex-PCR for identification of Aeromonas species

Introduction The number of reports of intestinal infections caused by Aeromonas spp. has increased significantly in recent years. In most clinical laboratories, identification of these bacteria is carried out by general phenotypic tests that sometimes do not accurately differentiate Aeromonas and Vibrio. Methods A duplex-polymerase chain reaction (PCR) was developed directed to 2 targets identifying Aeromonas spp. pathogenic to humans. Results The duplex-PCR results were reproducible and specific for Aeromonas spp. pathogenic to humans. Conclusions This method will allow differentiation between Vibrio and Aeromonas spp. in patients with in cholera-like symptoms and can also be used in water quality monitoring.

A consumer research project as the basis for the development of a marketing plan for a new spirit brand producing gin in Germany

This work project is about developing a marketing plan for a new gin brand in Germany. It is based on consumer and market research, including Portugal as a trend market for the qualitative research. For the undertaking it is seen as fundamental to understand the industry as well as the consumer needs, attitudes and preferences. Furthermore, it is important to consider the estimation of opinion leaders and trendsetters in the industry. In this context it turned out that barkeepers have a key-influencing role for the stimulation of demand. Based on the insights from this research as well as on the gained market knowledge, the marketing plan was developed. The goal is to convince other brand users to switch brands.

Active surveillance to determine the impact of methicillin resistance on mortality in patients with bacteremia and influences of the use of antibiotics on the development of MRSA infection

Introduction Methicillin-resistant Staphylococcus aureus (MRSA) is among the most important pathogens of nosocomial infections, mainly in intensive care units (ICUs), and accounts for 40-60% of all healthcare-associated S. aureus infections. We evaluated the incidence of nosocomial infection by S. aureus, identified the risk factors for MRSA infection, and evaluated the effect of resistance to methicillin on mortality in patients. Methods We conducted MRSA surveillance at a university hospital in Brazil from January 1, 2010, to December 31, 2010, and performed a retrospective case-control matched study to evaluate the frequency of subsequent MRSA bacteremia and death among patients. We evaluated and compared the risk factors between patients with MRSA and methicillin-sensitive Staphylococcus aureus (MSSA) infection. Results Sepsis was the most common cause of infection (17.7/1,000 patient-days), followed by surgical site (11.4/1,000 patient-days), pneumonia (4.1/1,000 patient-days), and urinary tract infection (2.4/1,000 patient-days). The significant risk factors were time of hospitalization, use of central vascular catheter (CVC), urinary catheter, nasogastric tube, parenteral nutrition, tracheostomy, mechanical ventilation, and previous antibiotic administration, the latter of which was the only independent risk factor for MRSA infection. Mortality was significantly higher in patients with MRSA. The number of antibiotics tested was not related to increases in the frequency of MRSA/1,000 patient-days. The incidence of mortality attributable to MRSA (bloodstream infection) BSI was 50%. Conclusions Surveillance results showed that the use of high levels of antibiotics was directly related to the development of MRSA infection, and the mortality attributable to MRSA in patients with bacteremia was significant.

Development of a fundus camera for analysis of photoreceptor directionality in the healthy retina

The Stiles-Crawford effect (SCE) is the well-known phenomenon in which the brightness of light perceived by the human eye depends upon its entrance point in the pupil. This physiological characteristic is due to the directional sensitivity of the cone photoreceptors in the retina and it displays an approximately Gaussian dependency which is altered in a number of pathologies. Retinal imaging, a widely spread clinical practice, may be used to evaluate the SCE and thus serve as diagnostic tool. Nonetheless, its use for such a purpose is still underdeveloped and far from the clinical reality. In this project a fundus camera was built and used to assess the cone photoreceptor directionality by reflective imaging of the retina in healthy individuals. The physical and physiological implications of its development are addressed in detail in the text: the optical properties of the human eye, illumination issues, acquiring a retinal image formed by the eye, among others. A full description of the developmental process that led to the final measuring method and results is also given. The developed setup was successfully used to obtain high quality images of the eye fundus and in particular the parafoveal cone photoreceptors. The SCE was successfully observed and characterized. Even though considerable improvements could be done to the measurement method, the project showed the feasibility of using retinal imaging to evaluate the SCE thus motivating its usage in a clinical environment.

Development of process control strategies exploiting knowledge from systems biology: application to MDCK suspension cells

Madine Darby Canine Kidney (MDCK) cell lines have been extensively evaluated for their potential as host cells for influenza vaccine production. Recent studies allowed the cultivation of these cells in a fully defined medium and in suspension. However, reaching high cell densities in animal cell cultures still remains a challenge. To address this shortcoming, a combined methodology allied with knowledge from systems biology was reported to study the impact of the cell environment on the flux distribution. An optimization of the medium composition was proposed for both a batch and a continuous system in order to reach higher cell densities. To obtain insight into the metabolic activity of these cells, a detailed metabolic model previously developed by Wahl A. et. al was used. The experimental data of four cultivations of MDCK suspension cells, grown under different conditions and used in this work came from the Max Planck Institute, Magdeburg, Germany. Classical metabolic flux analysis (MFA) was used to estimate the intracellular flux distribution of each cultivation and then combined with partial least squares (PLS) method to establish a link between the estimated metabolic state and the cell environment. The validation of the MFA model was made and its consistency checked. The resulted PLS model explained almost 70% of the variance present in the flux distribution. The medium optimization for the continuous system and for the batch system resulted in higher biomass growth rates than the ones obtained experimentally, 0.034 h-1 and 0.030 h-1, respectively, thus reducing in almost 10 hours the duplication time. Additionally, the optimal medium obtained for the continuous system almost did not consider pyruvate. Overall the proposed methodology seems to be effective and both proposed medium optimizations seem to be promising to reach high cell densities.

Development of an experimental setup for metal cutting research

Analytical, numerical and experimental models have been developed over time to try to characterize and understand the metal cutting process by chip removal. A true knowledge of the cutting process by chip removal is required by the increasing production, by the quality requirements of the product and by the reduced production time, in the industries in which it is employed. In this thesis an experimental setup is developed to evaluate the forces and the temperature distribution in the tool according to the orthogonal cutting model conditions, in order to evaluate its performance and its possible adoption in future works. The experimental setup is developed in a CNC lathe and uses an orthogonal cutting configuration, in which thin discs fixed onto a mandrel are cut by the cutting insert. In this experimental setup, the forces are measured by a piezoelectric dynamometer while temperatures are measured by thermocouples placed juxtaposed to the side face of the cutting insert. Three different solutions are implemented and evaluated for the thermocouples attachment in the cutting insert: thermocouples embedded in thermal paste, thermocouples embedded in copper plate and thermocouples brazed in the cutting insert. From the tests performed in the experimental setup it is concluded that the adopted forces measurement technique shows a good performance. Regarding to the adopted temperatures measurement techniques, only the thermocouples brazed in the cutting insert solution shows a good performance for temperature measurement. The remaining solutions show contact problems between the thermocouple and the side face of the cutting insert, especially when the vibration phenomenon intensifies during the cut. It is concluded that the experimental setup does not present a sufficiently robust and reliable performance, and that it can only be used in future work after making improvements in the assembly of the thermocouples.

Development of paper transistor with memory effect

This work will discuss the use of different paper membranes as both the substrate and dielectric for field-effect memory transistors. Three different nanofibrillated cellulose membranes (NFC) were used as the dielectric layer of the memory transistors (NFC), one with no additives, one with an added polymer PAE and one with added HCl. Gallium indium zinc oxide (GIZO) was used as the device’s semiconductor and gallium aluminium zinc oxide (GAZO) was used as the gate electrode. Fourier transform infrared spectroscopy (FTIR) was used to access the water content of the paper membranes before and after vacuum. It was found that the devices recovered their water too quickly for a difference to be noticeable in FTIR. The transistor’s electrical performance tests yielded a maximum ION/IOFF ratio of around 3,52x105 and a maximum subthreshold swing of 0,804 V/decade. The retention time of the dielectric charge that grants the transistor its memory capabilities was accessed by the measurement of the drain current periodically during 144 days. During this period the mean drain current did not lower, leaving the retention time of the device indeterminate. These results were compared with similar devices revealing these devices to be at the top tier of the state-of-the-art.

The larval development of palaemonid shrimps from the amazon region reared in the laboratory. V. The abbreviated development of Pseudopalaemon chryseus Kensley & Walker, 1982 (CRUSTACEA : DECAPODA: PALAEMONIDAE)

Larval development of the freshwater palaemonid shrip Pseudopalaemon chryseus Kensley & Walker, 1982 was studied in the laboratory from the offspring oof females collected in a lake of the lower Negro River system. Females carry few (14 to 43), large (1.86 + 0.13 x 1.29 + 0.06 mm), yolk-rich eggs. The species goes throught three larval stages without feeding and the main feature of its larval development is the presence of functional walking legs on hatching. Descriptions and illustrations of the three larval and first juvenile stages are presented.