An evaluation of pharmacy education and pre-registration training

This thesis covers two major aspects of pharmacy education; undergraduate education and pre-registration training. A cohort of pharmacy graduates were surveyed over a period of four years, on issues related to undergraduate education, pre-registration training and continuing education. These graduates were the first-ever to sit the pre-registration examination. In addition, the opinions of pre-registration tutors were obtained on pre-registration training, during the year that competence-based assessment was introduced. It was concluded that although the undergraduate course provided a broad base of knowledge suitable for graduates in all branches of pharmacy, several issues were identified which would require attention in future developments of the course. These were: 1. the strong support for the expansion of clinical, social and practice-based teaching. 2. the strong support to retain the scientific content to the same extent as in the three-year course. 3. a greater use of problem-based learning methods. The graduates supported the provision of a pre-registration continuing education course to help prepare for the examination and in areas inadequately covered in the undergraduate course. There was also support for the introduction of some form of split branch training. There was no strong evidence to suggest that the training had been an application of undergraduate education. In general, competence-based training was well regarded by tutors as an appropriate and effective method of skill assessment. However, community tutors felt it was difficult to carry out effectively due to day-to-day time constraints. The assistant tutors in hospital pharmacy were found to have a very important role in provision of training, and should be adequately trained and supported. The study recommends the introduction of uniform training and a quality assurance mechanism for all tutors and assistants undertaking this role.

Global optimisation of cold-formed steel sections

In this thesis, standard algorithms are used to carry out the optimisation of cold-formed steel purlins such as zed, channel and sigma sections, which are assumed to be simply supported and subjected to a gravity load. For zed, channel and sigma section, the local buckling, distortional buckling and lateral-torsional buckling are considered respectively herein. Currently, the local buckling is based on the BS 5950-5:1998 and EN 1993-1-3:2006. The distortional buckling is calculated by the direct strength method employing the elastic distortional buckling which is calculated by three available approaches such as Hancock (1995), Schafer and Pekoz (1998), Yu (2005). In the optimisation program, the lateral-torsional buckling based on BS 5950-5:1998, AISI and analytical model of Li (2004) are investigated. For the optimisation program, the programming codes are written for optimisation of channel, zed and sigma beam. The full study has been coded into a computer-based analysis program (MATLAB).

A study of the micro-mechanics of granular media

The development of more realistic constitutive models for granular media, such as sand, requires ingredients which take into account the internal micro-mechanical response to deformation. Unfortunately, at present, very little is known about these mechanisms and therefore it is instructive to find out more about the internal nature of granular samples by conducting suitable tests. In contrast to physical testing the method of investigation used in this study employs the Distinct Element Method. This is a computer based, iterative, time-dependent technique that allows the deformation of granular assemblies to be numerically simulated. By making assumptions regarding contact stiffnesses each individual contact force can be measured and by resolution particle centroid forces can be calculated. Then by dividing particle forces by their respective mass, particle centroid velocities and displacements are obtained by numerical integration. The Distinct Element Method is incorporated into a computer program 'Ball'. This program is effectively a numerical apparatus which forms a logical housing for this method and allows data input and output, and also provides testing control. By using this numerical apparatus tests have been carried out on disc assemblies and many new interesting observations regarding the micromechanical behaviour are revealed. In order to relate the observed microscopic mechanisms of deformation to the flow of the granular system two separate approaches have been used. Firstly a constitutive model has been developed which describes the yield function, flow rule and translation rule for regular assemblies of spheres and discs when subjected to coaxial deformation. Secondly statistical analyses have been carried out using data which was extracted from the simulation tests. These analyses define and quantify granular structure and then show how the force and velocity distributions use the structure to produce the corresponding stress and strain-rate tensors.

Development of an electric heat pump for domestic use

This thesis records the design and development of an electrically driven, air to water, vapour compression heat pump of nominally 6kW heat output, for residential space heating. The study was carried out on behalf of GEC Research Ltd through the Interdisciplinary Higher Degrees Scheme at Aston University. A computer based mathematical model of the vapour compression cycle was produced as a design aid, to enable the effects of component design changes or variations in operating conditions to be predicted. This model is supported by performance testing of the major components, which revealed that improvements in the compressor isentropic efficiency offer the greatest potential for further increases in cycle COPh. The evaporator was designed from first principles, and is based on wire-wound heat transfer tubing. Two evaporators, of air side area 10.27 and 16.24m2, were tested in a temperature and humidity controlled environment, demonstrating that the benefits of the large coil are greater heat pump heat output and lower noise levels. A systematic study of frost growth rates suggested that this problem is most severe at the conditions of saturated air at 0oC combined with low condenser water temperature. A dynamic simulation model was developed to predict the in-service performance of the heat pump. This study confirmed the importance of an adequate radiator area for heat pump installations. A prototype heat pump was designed and manufactured, consisting of a hermetic reciprocating compressor, a coaxial tube condenser and a helically coiled evaporator, using Refrigerant 22. The prototype was field tested in a domestic environment for one and a half years. The installation included a comprehensive monitoring system. Initial problems were encountered with defrosting and compressor noise, both of which were solved. The unit then operated throughout the 1985/86 heating season without further attention, producing a COPh of 2.34.

Expatriate managers adjustment and its impact on subordinates reactions: a cross cultural leadership study of Kenya and Ethiopia

Research on culture, leadership and adjustment shows that societal culture influences leadership in such a way that it can impact on expatriate managers' effectiveness and adjustment in a new culture. In previous research, cultural background, personality, motives or behaviour of expatriate managers and their followers' reactions to them have been investigated in Europe, America and Asia. However, little attention has been paid on research on expatriate managers in African cultures especially in Eastern Africa. The present study represents an attempt to address the gap by examining how societal culture, leadership and adjustment success are interrelated for expatriate managers in Kenya and Ethiopia. Questionnaire data were obtained from a) local middle managers (N=160) for studying societal culture and leadership in Kenya and Ethiopia, b) expatriate managers in non-governmental organizations - NGOs (N=28) for studying expatriate managers' personality, motives and adjustment success and c) their immediate subordinates (N=125) for studying the expatriate managers' behaviours and their subordinates' reactions to them. Additionally, expatriate managers were interviewed and responses were coded for implicit motives, experiences and adjustment. SPSS was used to analyse data from questionnaires to obtain cultural and leadership dimensions, leader behaviour and subordinate reactions. The NVIVO computer based disclosure analysis package was used to analyse interview data. Findings indicate that societal culture influences leadership behaviours and leadership perceptions while the expatriate managers' motives, behaviours, personality and the cross cultural training they received prior to their assignment impact on the expatriates' adjustment success and on subordinates' reactions to them. The cultural fit between expatriate managers' home country (19 countries) and the target country (Kenya or Ethiopia) had no significant association with adjustment success but was positively related to expatriate behaviour and negatively associated with subordinates reactions. However, some particular societal practices - obviously adopted by expatriates and transferred to their target country - did predict subordinates' commitment, motivation and job satisfaction. Furthermore, expatriates' responsibility motivation was positively related to their adjustment success. Regarding leadership behaviours and effectiveness, expatriate' supportive behaviours predicted subordinates' job satisfaction most strongly. Expatriate managers expressing their management philosophies and experience shed light on the various aspects of adjustment and management of NGOs. In addition, review of Kenyan and Ethiopian cultures and the NGO context in these countries offers valuable information for expatriate managers. This study's general imphcation for Cross Cultural Management and lnternational Human Resources Management is that the combination of culture general and culture specific knowledge and reflections on Eastern Africa countries can inform senior management and international HR staff about the critical issue of what to include in training, coaching, and actual experience in a particular host country in order to ensure effective leadership. Furthennore, this knowledge is expected to influence expatriate managers' behaviour modification to enhance positive subordinate reactions. Questions about how to prepare expatriate managers and subordinates to work more competently and sensitively across cultures are addressed. Further theoretical implications, limitations of the study and directions for future research are also addressed.

Modelling human performance within manufacturing systems design:from a theoretical towards a practical framework

Computer-based simulation is frequently used to evaluate the capabilities of proposed manufacturing system designs. Unfortunately, the real systems are often found to perform quite differently from simulation predictions and one possible reason for this is an over-simplistic representation of workers' behaviour within current simulation techniques. The accuracy of design predictions could be improved through a modelling tool that integrates with computer-based simulation and incorporates the factors and relationships that determine workers' performance. This paper explores the viability of developing a similar tool based on our previously published theoretical modelling framework. It focuses on evolving this purely theoretical framework towards a practical modelling tool that can actually be used to expand the capabilities of current simulation techniques. Based on an industrial study, the paper investigates how the theoretical framework works in practice, analyses strengths and weaknesses in its formulation, and proposes developments that can contribute towards enabling human performance modelling in a practical way.

Humans:the missing link in manufacturing simulation?

Computer based discrete event simulation (DES) is one of the most commonly used aids for the design of automotive manufacturing systems. However, DES tools represent machines in extensive detail, while only representing workers as simple resources. This presents a problem when modelling systems with a highly manual work content, such as an assembly line. This paper describes research at Cranfield University, in collaboration with the Ford Motor Company, founded on the assumption that human variation is the cause of a large percentage of the disparity between simulation predictions and real world performance. The research aims to improve the accuracy and reliability of simulation prediction by including models of human factors.

A manufacturing systems modelling using system dynamics:forming a dedicated modelling tool

Discrete event simulation is a popular aid for manufacturing system design; however in application this technique can sometimes be unnecessarily complex. This paper is concerned with applying an alternative technique to manufacturing system design which may well provide an efficient form of rough-cut analysis. This technique is System Dynamics, and the work described in this paper has set about incorporating the principles of this technique into a computer based modelling tool that is tailored to manufacturing system design. This paper is structured to first explore the principles of System Dynamics and how they differ from Discrete Event Simulation. The opportunity for System Dynamics is then explored, and this leads to defining the capabilities that a suitable tool would need. This specification is then transformed into a computer modelling tool, which is then assessed by applying this tool to model an engine production facility. Read More: http://www.worldscientific.com/doi/abs/10.1142/S0219686703000228

Attentional demand and cost responsibility as stressors in shopfloor jobs

Two studies were conducted to test for the effects of attentional demand and cost responsibility on psychological strain. One was a field experiment involving operators of computer-based manufacturing equipment, and the other was a cross-sectional investigation of employees in a wide range of jobs. The results showed increased strain only for those in jobs high on both attentional demand and cost responsibility. Implications for job design for new manufacturing technologies are discussed.

Discretion and control in education:the teacher as street-level bureaucrat

This article assesses the impact of education reform and the new public management (NPM) on the discretion of school teachers. The focal point of the study is Michael Lipsky's theory of discretion which casts public service professionals and others involved in service delivery as 'street-level bureaucrats' because their high degree of discretionary rule-making power enabled them to effectively make policy as well as implement it. The article considers the relationship between education reform and the NPM and focuses on the increased emphasis on skills-based teaching and changes in management and leadership in schools. The literature and survey of teachers demonstrate that discretion in the workplace has been eroded to such an extent due to a high degree of central regulation and local accountability as to question the applicability of Lipsky's model. The findings are based on the literature and a small survey undertaken by the author. © 2007 BELMAS.

Handwriting in Forensic Investigations

The process of automatic handwriting investigation in forensic science is described. The general scheme of a computer-based handwriting analysis system is used to point out at the basic problems of image enhancement and segmentation, feature extraction and decision-making. Factors that may compromise the accuracy of expert’s conclusion are underlined and directions for future investigations are marked.

Analogical Reasoning Techniques in Intelligent Counterterrorism Systems

The paper develops a set of ideas and techniques supporting analogical reasoning throughout the life-cycle of terrorist acts. Implementation of these ideas and techniques can enhance the intellectual level of computer-based systems for a wide range of personnel dealing with various aspects of the problem of terrorism and its effects. The method combines techniques of structure-sensitive distributed representations in the framework of Associative-Projective Neural Networks, and knowledge obtained through the progress in analogical reasoning, in particular the Structure Mapping Theory. The impact of these analogical reasoning tools on the efforts to minimize the effects of terrorist acts on civilian population is expected by facilitating knowledge acquisition and formation of terrorism-related knowledge bases, as well as supporting the processes of analysis, decision making, and reasoning with those knowledge bases for users at various levels of expertise before, during, and after terrorist acts.

Интегрированный Моделирующий Комплекс Поддержки Принятия Решений в Комплексной Корпоративной Системе Управления Магистральной Газотранспортной Сетью

The approach to construction, structuring class of tasks, technology of the use and stages of modernization systems support of decision-making in composition the operative-dispatch control computer-based system by the gas-transport system of Ukraine is considered.

The challenges of developing an online tool to measure the quality of the passenger experience in a PanEuropean context

METPEX is a 3 year, FP7 project which aims to develop a PanEuropean tool to measure the quality of the passenger's experience of multimodal transport. Initial work has led to the development of a comprehensive set of variables relating to different passenger groups, forms of transport and journey stages. This paper addresses the main challenges in transforming the variables into usable, accessible computer based tools allowing for the real time collection of information, across multiple journey stages in different EU countries. Non-computer based measurement instruments will be used to gather information from those who may not have or be familiar with mobile technology. Smartphone-based measurement instruments will also be used, hosted in two applications. The mobile applications need to be easy to use, configurable and adaptable according to the context of use. They should also be inherently interesting and rewarding for the participant, whilst allowing for the collection of high quality, valid and reliable data from all journey types and stages (from planning, through to entry into and egress from different transport modes, travel on public and personal vehicles and support of active forms of transport (e.g. cycling and walking). During all phases of the data collection and processing, the privacy of the participant is highly regarded and is ensured. © 2014 Springer International Publishing.

Application of ensemble averaging to the analysis of electromyography recordings under whole body vibratory stimulation

The aim of this study is to evaluate the application of ensemble averaging to the analysis of electromyography recordings under whole body vibratory stimulation. Recordings from Rectus Femoris, collected during vibratory stimulation at different frequencies, are used. Each signal is subdivided in intervals, which time duration is related to the vibration frequency. Finally the average of the segmented intervals is performed. By using this method for the majority of the recordings the periodic components emerge. The autocorrelation of few seconds of signals confirms the presence of a pseudosinusoidal components strictly related to the soft tissues oscillations caused by the mechanical waves. © 2014 IEEE.