Evaluation/Optimization of reservoir operation rules for flood management using an integrated hydrologic-hydraulic framework

Se ha presentado la evaluación y optimización de las reglas de operación de un embalse para gestión de avenidas usando un entorno integrado hidrológico- hidráulico de tipo Monte Carlo. Some reservoirs play a major role in flood protection, managing the floods and reducing or delaying the peak discharges in the river downstream. However, the changing environment (natural and anthropological changes) requires the development of more elaborated strategies for reservoir operation. Three factors are relevant: 1) the natural variability of inflow hydrographs, 2) the competition for reservoir storage capacity between flood control and other uses, and 3) the existence of built-up areas on downstream river reaches. A framework for evaluation/optimization of reservoir operation rules for flood management in a changing environment is presented in this study. The study was carried out using an integrated hydrologic – hydraulic model in a Monte Carlo framework.

Coupled Nonlinear Ginzburg-Landau and Mechanics Model for Martensitic Transformations in Polycrystals

Las transformaciones martensíticas (MT) se definen como un cambio en la estructura del cristal para formar una fase coherente o estructuras de dominio multivariante, a partir de la fase inicial con la misma composición, debido a pequeños intercambios o movimientos atómicos cooperativos. En el siglo pasado se han descubierto MT en diferentes materiales partiendo desde los aceros hasta las aleaciones con memoria de forma, materiales cerámicos y materiales inteligentes. Todos muestran propiedades destacables como alta resistencia mecánica, memoria de forma, efectos de superelasticidad o funcionalidades ferroicas como la piezoelectricidad, electro y magneto-estricción etc. Varios modelos/teorías se han desarrollado en sinergia con el desarrollo de la física del estado sólido para entender por qué las MT generan microstructuras muy variadas y ricas que muestran propiedades muy interesantes. Entre las teorías mejor aceptadas se encuentra la Teoría Fenomenológica de la Cristalografía Martensítica (PTMC, por sus siglas en inglés) que predice el plano de hábito y las relaciones de orientación entre la austenita y la martensita. La reinterpretación de la teoría PTMC en un entorno de mecánica del continuo (CM-PTMC) explica la formación de los dominios de estructuras multivariantes, mientras que la teoría de Landau con dinámica de inercia desentraña los mecanismos físicos de los precursores y otros comportamientos dinámicos. La dinámica de red cristalina desvela la reducción de la dureza acústica de las ondas de tensión de red que da lugar a transformaciones débiles de primer orden en el desplazamiento. A pesar de las diferencias entre las teorías estáticas y dinámicas dado su origen en diversas ramas de la física (por ejemplo mecánica continua o dinámica de la red cristalina), estas teorías deben estar inherentemente conectadas entre sí y mostrar ciertos elementos en común en una perspectiva unificada de la física. No obstante las conexiones físicas y diferencias entre las teorías/modelos no se han tratado hasta la fecha, aun siendo de importancia crítica para la mejora de modelos de MT y para el desarrollo integrado de modelos de transformaciones acopladas de desplazamiento-difusión. Por lo tanto, esta tesis comenzó con dos objetivos claros. El primero fue encontrar las conexiones físicas y las diferencias entre los modelos de MT mediante un análisis teórico detallado y simulaciones numéricas. El segundo objetivo fue expandir el modelo de Landau para ser capaz de estudiar MT en policristales, en el caso de transformaciones acopladas de desplazamiento-difusión, y en presencia de dislocaciones. Comenzando con un resumen de los antecedente, en este trabajo se presentan las bases físicas de los modelos actuales de MT. Su capacidad para predecir MT se clarifica mediante el ansis teórico y las simulaciones de la evolución microstructural de MT de cúbicoatetragonal y cúbicoatrigonal en 3D. Este análisis revela que el modelo de Landau con representación irreducible de la deformación transformada es equivalente a la teoría CM-PTMC y al modelo de microelasticidad para predecir los rasgos estáticos durante la MT, pero proporciona una mejor interpretación de los comportamientos dinámicos. Sin embargo, las aplicaciones del modelo de Landau en materiales estructurales están limitadas por su complejidad. Por tanto, el primer resultado de esta tesis es el desarrollo del modelo de Landau nolineal con representación irreducible de deformaciones y de la dinámica de inercia para policristales. La simulación demuestra que el modelo propuesto es consistente fcamente con el CM-PTMC en la descripción estática, y también permite una predicción del diagrama de fases con la clásica forma ’en C’ de los modos de nucleación martensítica activados por la combinación de temperaturas de enfriamiento y las condiciones de tensión aplicada correlacionadas con la transformación de energía de Landau. Posteriomente, el modelo de Landau de MT es integrado con un modelo de transformación de difusión cuantitativa para elucidar la relajación atómica y la difusión de corto alcance de los elementos durante la MT en acero. El modelo de transformaciones de desplazamiento y difusión incluye los efectos de la relajación en borde de grano para la nucleación heterogenea y la evolución espacio-temporal de potenciales de difusión y movilidades químicas mediante el acoplamiento de herramientas de cálculo y bases de datos termo-cinéticos de tipo CALPHAD. El modelo se aplica para estudiar la evolución microstructural de aceros al carbono policristalinos procesados por enfriamiento y partición (Q&P) en 2D. La microstructura y la composición obtenida mediante la simulación se comparan con los datos experimentales disponibles. Los resultados muestran el importante papel jugado por las diferencias en movilidad de difusión entre la fase austenita y martensita en la distibución de carbono en las aceros. Finalmente, un modelo multi-campo es propuesto mediante la incorporación del modelo de dislocación en grano-grueso al modelo desarrollado de Landau para incluir las diferencias morfológicas entre aceros y aleaciones con memoria de forma con la misma ruptura de simetría. La nucleación de dislocaciones, la formación de la martensita ’butterfly’, y la redistribución del carbono después del revenido son bien representadas en las simulaciones 2D del estudio de la evolución de la microstructura en aceros representativos. Con dicha simulación demostramos que incluyendo las dislocaciones obtenemos para dichos aceros, una buena comparación frente a los datos experimentales de la morfología de los bordes de macla, la existencia de austenita retenida dentro de la martensita, etc. Por tanto, basado en un modelo integral y en el desarrollo de códigos durante esta tesis, se ha creado una herramienta de modelización multiescala y multi-campo. Dicha herramienta acopla la termodinámica y la mecánica del continuo en la macroescala con la cinética de difusión y los modelos de campo de fase/Landau en la mesoescala, y también incluye los principios de la cristalografía y de la dinámica de red cristalina en la microescala. ABSTRACT Martensitic transformation (MT), in a narrow sense, is defined as the change of the crystal structure to form a coherent phase, or multi-variant domain structures out from a parent phase with the same composition, by small shuffles or co-operative movements of atoms. Over the past century, MTs have been discovered in different materials from steels to shape memory alloys, ceramics, and smart materials. They lead to remarkable properties such as high strength, shape memory/superelasticity effects or ferroic functionalities including piezoelectricity, electro- and magneto-striction, etc. Various theories/models have been developed, in synergy with development of solid state physics, to understand why MT can generate these rich microstructures and give rise to intriguing properties. Among the well-established theories, the Phenomenological Theory of Martensitic Crystallography (PTMC) is able to predict the habit plane and the orientation relationship between austenite and martensite. The re-interpretation of the PTMC theory within a continuum mechanics framework (CM-PTMC) explains the formation of the multivariant domain structures, while the Landau theory with inertial dynamics unravels the physical origins of precursors and other dynamic behaviors. The crystal lattice dynamics unveils the acoustic softening of the lattice strain waves leading to the weak first-order displacive transformation, etc. Though differing in statics or dynamics due to their origins in different branches of physics (e.g. continuum mechanics or crystal lattice dynamics), these theories should be inherently connected with each other and show certain elements in common within a unified perspective of physics. However, the physical connections and distinctions among the theories/models have not been addressed yet, although they are critical to further improving the models of MTs and to develop integrated models for more complex displacivediffusive coupled transformations. Therefore, this thesis started with two objectives. The first one was to reveal the physical connections and distinctions among the models of MT by means of detailed theoretical analyses and numerical simulations. The second objective was to expand the Landau model to be able to study MTs in polycrystals, in the case of displacive-diffusive coupled transformations, and in the presence of the dislocations. Starting with a comprehensive review, the physical kernels of the current models of MTs are presented. Their ability to predict MTs is clarified by means of theoretical analyses and simulations of the microstructure evolution of cubic-to-tetragonal and cubic-to-trigonal MTs in 3D. This analysis reveals that the Landau model with irreducible representation of the transformed strain is equivalent to the CM-PTMC theory and microelasticity model to predict the static features during MTs but provides better interpretation of the dynamic behaviors. However, the applications of the Landau model in structural materials are limited due its the complexity. Thus, the first result of this thesis is the development of a nonlinear Landau model with irreducible representation of strains and the inertial dynamics for polycrystals. The simulation demonstrates that the updated model is physically consistent with the CM-PTMC in statics, and also permits a prediction of a classical ’C shaped’ phase diagram of martensitic nucleation modes activated by the combination of quenching temperature and applied stress conditions interplaying with Landau transformation energy. Next, the Landau model of MT is further integrated with a quantitative diffusional transformation model to elucidate atomic relaxation and short range diffusion of elements during the MT in steel. The model for displacive-diffusive transformations includes the effects of grain boundary relaxation for heterogeneous nucleation and the spatio-temporal evolution of diffusion potentials and chemical mobility by means of coupling with a CALPHAD-type thermo-kinetic calculation engine and database. The model is applied to study for the microstructure evolution of polycrystalline carbon steels processed by the Quenching and Partitioning (Q&P) process in 2D. The simulated mixed microstructure and composition distribution are compared with available experimental data. The results show that the important role played by the differences in diffusion mobility between austenite and martensite to the partitioning in carbon steels. Finally, a multi-field model is proposed by incorporating the coarse-grained dislocation model to the developed Landau model to account for the morphological difference between steels and shape memory alloys with same symmetry breaking. The dislocation nucleation, the formation of the ’butterfly’ martensite, and the redistribution of carbon after tempering are well represented in the 2D simulations for the microstructure evolution of the representative steels. With the simulation, we demonstrate that the dislocations account for the experimental observation of rough twin boundaries, retained austenite within martensite, etc. in steels. Thus, based on the integrated model and the in-house codes developed in thesis, a preliminary multi-field, multiscale modeling tool is built up. The new tool couples thermodynamics and continuum mechanics at the macroscale with diffusion kinetics and phase field/Landau model at the mesoscale, and also includes the essentials of crystallography and crystal lattice dynamics at microscale.

El borde urbano: un acercamiento paisajístico y funcional de los límites del suelo urbanizado en las ciudades medias españolas

Asistimos a una evolución en la relación entre ciudad y resto del territorio. Este cambio desemboca en la eliminación del límite. La ciudad moderna se diluye en el territorio: el límite tradicional que separaba espacio urbano de espacio natural se ha diluído. La Discontinuidad entre la ciudad y el campo no se produce de forma definida (bien mediante un límite abrupto o con un gradiente) sino mediante una interfase fragmentada de funcionamiento inadecuado y que, además, no permite una clara identificación paisajística, creando problemas de eficiencia y de identidad urbana. El primer objetivo de esta investigación será determinar si existe la posibilidad de dibujar gráficamente el límite de nuestras ciudades medias para detectar si realmente existe y de qué manera se produce. A partir de aquí se realizará una catalogación del límite con el objetivo de determinar si existe algún tipo predominante sobre los demás. La comparativa entre las ciudades nos aportará la visión de en qué medida el tipo de límite es común o por el contrario singular a unas características propias de cada ciudad. El muestreo se realiza sobre un total de seis ciudades medias españolas, todas ellas capitales de provincia y con una población entre 100.000 y 300.000 habitantes: Vitoria-Gasteiz, Burgos, Pamplona, Valladolid, Lleida y Logroño. El primer paso de la metodología consiste en identificar el límite a través de su representación cartográfica. A partir de aquí se estudia qué limita con qué: cuáles son los usos urbanos que se sitúan en el borde y con qué usos no urbanos limitan. De este modo se hacen cuantificables y por lo tanto medibles. Se establecen las relaciones numéricas de estos usos del suelo y sus porcentajes. El recorrido a lo largo del límite confirma que se trata de un espacio multifuncional. Y se identifica el Límite de lo Común, un límite similar en cuanto a usos y tipologías en todas las ciudades estudiadas. La identidad en el límite se genera a partir de una imagen Genérica (el límite de lo común), una imagen Cerrada, una imagen más o menos Rural, una imagen Cultural (la huella del límite histórico) y finalmente a través de una imagen en Degradación. El límite adquiere una entidad espacial llamada Intefase, compuesta por piezas urbanas dispersas a lo largo de una franja que rodea la ciudad. Este espacio adopta usos y lógicas de localización propios, lo que le confiere una identidad única. En la segunda parte de la tesis se categorizan las diferentes tipologías del límite, el límite según Barreras, según las relaciones campo-ciudad y según aspectos visuales. Los datos confirman que la ciudad media española muestra un aspecto de ciudad dispersa, en diferentes grados de desarrollo; es una ciudad sin barreras que sin embargo se muestra cerrada hacia el campo. ABSTRACT The urban-rural relationship is currently evolving; the in-between boundary is finally been removed. The contemporary city sprawls over the countryside, and the boundary of the traditional city, the urban-rural divide, fades away. Discontinuity between the city and the countryside does not happen in a defined pattern (either by an abrupt or a gradient boundary) but by a malfunctioning rural-urban fringe fragmented and that also does not allow a clear identification landscape, creating problems of efficiency and urban identity. This research focuses on mapping our medium cities boundary, in order to identify whether it exists and how it occurs. The case studies are six medium size Spanish cities with a population between 100.000 and 300.000: Vitoria-Gasteiz, Burgos, Pamplona, Valladolid, Lleida and Logroño. Tracking the boundaries confirms that these are multifunctional spaces. This research defines a new concept called the Common Boundary, that involves similar uses and types in all the boundaries of the case studies. The boundary identity is built up with a Generic image (the common boundary), a closed image, a rural image, a cultural image (the imprint of the historic boundary) and finally with a degradation image. This boundary acquires a spatial entity called Intefase composed of sprawl urban pieces along a rural-urban fringe surrounding the city. New uses and different logical location appear in this fringe, therefore it gives it the uniqueness of the fringe. Finally this research categorizes the different boundary types: the boundary as barriers, the boundary as rural-urban relations and as visual aspects. Examined data confirms that the medium size Spanish city suffers from urban sprawl at different stages. Moreover a city without barriers and closed to the countryside is shown.

Protocolos de diseño y cálculo de luz natural en arquitectura

Esta tesis doctoral aborda el problema de la falta de un protocolo que conecte las elevadas y variadas expectativas formales que plantea la arquitectura singular respecto de la luz natural con las distintas herramientas de cálculo y sus métricas asociadas disponibles. La pregunta que la tesis responde es la siguiente “¿Es posible definir un protocolo que ordene las decisiones de diseño y cálculo en la resolución de los problemas de luz natural en la arquitectura singular en forma de procesos, de modo suficientemente genérico y operativo, creando conocimiento útil sobre el problema de que se trate en cada etapa del mismo?” Metodológicamente se desarrolla en dos ciclos de investigación enlazados: primero se DEFINE de modo científico el protocolo y luego se EVALÚA SU APLICABILIDAD. La construcción del protocolo se resuelve utilizando el método inductivo a partir de un corpus previo de problemas de luz natural ya resueltos por el autor. Son analizados de modo sistemático y aplicando diversas estrategias de reducción y síntesis. conducen a un enunciado inicial del protocolo. Una vez enunciado el protocolo, que se denomina DAYLIGHTING CANVAS, se valora su la aplicabilidad mediante experimentación directa, que se realiza a través de tres experiencias diferentes. En la primera evaluamos su aplicabilidad en un problema representativo, en la segunda su aplicabilidad para resolución de problemas planteados de modo aleatorio, y por último su aplicabilidad en el caso de ser empleado por diferentes autores. ABSTRACT The Ph.D. thesis address the lack of a protocol capable to link the higher expectations regarding daylighting of the singular architecture practice with the available daylighting calculation tools and metrics. The thesis question is as follows: “Is it possible to define a protocol capable to arrange the design and calculation decisions needed to be made to solve a daylighting problem for a singular architecture project, as a process, in a way as generic as operational, by building daylighting related knowledge in each step of it?” Methodologically the research is developed in two linked stages: first the protocol is scientifically DEFINED and then its APPLICABILITY is tested. The protocol is built up by using the inductive method over a group of previously solved daylighting projects provided by the thesis author. Those projects has been systematically analyzed by applying some reduction and synthesis strategies, which leads to a preliminary protocol formulation. Once the protocol is fully formulated under the name of “DAYLIGHTING CANVAS”, its applicability is assessed by direct experimentation, done through three different experiments. In the first one the applicability to a complex problem is assessed; in the second one its applicability to non predicted daylighting problems; and finally its applicability for different users.

Un deseo moderno todavía pendiente : la casa patio, una posible técnica de agrupación de vivienda colectiva vertical

La idea de aportar a la vivienda en altura las cualidades de la casa patio, se ha estudiado durante años. Podemos decir que el origen de este análisis se inició en 1922 cuando Le Corbusier empezó a investigar a cerca de los Inmuebles Villa; sin duda sabemos que ha llegado hasta la actualidad. Ayudado por la labor de búsqueda de diferentes arquitectos a lo largo de la historia, podemos afirmar que todos los casos conforman una idea única de proyecto. La idea de agrupar casas patio en altura manteniendo las características propias de este tipo de viviendas, privacidad, espacio libre, apertura cenital, comunicación interior‐exterior… Los Inmuebles‐Villa serán repetidamente aludidos, citados o retomados como un tipo paradigmático entre las propuestas de agrupaciones de casas patio en altura. Si pensamos en el concepto tradicional de patio, denominarlo como un espacio de viviendas apiladas en altura no parece una elección adecuada, no obstante la noción de patio permite una gran cantidad de asociaciones. Su valor radica en el traslado de una idea conocida a un nuevo contexto, produciendo así una reformulación del problema. Elegimos para este proceso, la vivienda colectiva, entendiendo la colectividad como agrupación, pues es esta agrupación de vivienda la encargada de crear ciudad; así no sólo vale la pena dar importancia a una célula con su independencia, sino en la relación que estas establecen con sus semejantes. De ahí la idea de que esa colectividad de casas patio, pueda darse también en vertical, buscando las condiciones antes mencionadas. Un deseo que apareció en el Movimiento Moderno y que desde ese momento ha sido algo anhelado por la arquitectura hasta nuestros días. El patio se presenta en la mayoría de las ocasiones como un espacio con múltiples afecciones, desde el patio que aporta a la vivienda una zona de esparcimiento hasta un espacio destinado a la ventilación, aunque en definitiva, podemos decir que consiste en un espacio capaz de contener un lugar. Quizás por eso aparece de diversas formas en nuestra arquitectura, sin importar su ubicación o forma. Simplemente un espacio que aporta al interior unas características que esas viviendas nunca alcanzarían sin él. Por eso lo que conocemos como casa patio es un tipo de arquitectura que se extiende hasta la antigüedad. Ese concepto de espacio exterior incorporado a la vivienda es una de las piezas fundamentales en nuestra arquitectura. Una idea ampliamente estudiada que deja a un lado los diferentes tipos de “patio” que fueron apareciendo, así como las múltiples funciones que dichos espacios fueron capaces de llevar a cabo, primando en definitiva la forma en la que cambiaron la idea de habitar. A lo largo de este análisis se han ido hallando evidencias de los múltiples mecanismos empleados en los casos estudiados. Como se ha visto, en ellos aparecen características que únicamente pueden aparecer en un espacio exterior cuando se trata de un patio. Los patios estudiados se consideran patios tradicionales, independientemente de la cota a la que se encuentren, aunque no cumplan alguna de las características a priori necesarias para la definición de patio. Para captar la esencia de esos espacios, no es necesario traspasar sus límites, ya que ésta se irradia al interior e invade la atmósfera de los espacios contiguos. Se plantea como objetivo principal rastrear las huellas de una investigación proyectual que Le Corbusier inaugura y deja abierta; se trata de descubrir qué ecos, qué rebotes, qué repercusiones tiene el concepto de patio en altura a lo largo de su historia. En esta búsqueda de identificación de las características de estos espacios, hemos seleccionado tres casos, partiendo de las experiencias tanto en patios tradicionales como en patios en altura de tres maestros como son Le Corbusier, José Luis Sert y Charles Correa. Los casos estudiados podrían haber sido muchos más. Este número supone solo un ejemplo de un universo mayor, que ha sido operativo para el desarrollo de este trabajo. Ellos nos guiarán por su arquitectura para intentar resolver la idea de los patios en altura. Hemos analizado las influencias proyectuales existentes entre algunos de los casos que forman parte de esta reflexión, entre los que existen unos vínculos claros, que pueden ser esas claves que estamos buscando para resolver la agrupación de casa patio en altura. A través de este trabajo se ha puesto de manifiesto que la aplicación del concepto de casas patio en altura depende tanto de su ubicación, del clima y la cultura local, como el tipo de patio del que se parte. De estos conceptos surgen soluciones diferentes entre ellas y por tanto no pueden extrapolarse una sola idea a todos los casos. Algunas ideas están presentes durante toda la investigación: fachadas como resultado de la repetición de células, sucesión de espacios, plantas de casas patio tradicional, dobles alturas…Otros casos destacan por su singularidad, por haber buscado la solución del problema mediante la originalidad. En definitiva buscamos casas patio en altura. Y si esta tesis contribuye, en alguna medida, a obtener las claves para que esta tipología edificatoria funcione, de sus características, sus necesidades, y su resultado, es decir, de su búsqueda de ese deseo moderno que presentábamos al principio, será entonces que esa tipología ilusoria, sea una arquitectura real, y por lo tanto también podrá llevarse a cabo y dejar de ser un deseo para convertirse en realidad. Sera que el deseo moderno se ha cumplido. ABSTRACT The idea of giving housing the height of the patio housing qualities, it has been studied for ages. It can be said that the origin of this analysis was started in 1922, when Le Cobustier began investigating about The Villa Building: obviously it is known nowadays due to different architect’s labor of searching through the history. It’s easy to say that all the cases shape a single project idea , the idea of gathering patio houses with the same height keeping the inner characteristics of traditional patio houses such privacy, free space, zenithal opening, inside –outside communication…etc. If we thought about the traditional concept of patio, to define it, in the case of gathering because of the height, it is not suitable to consider it like a pile of houses with the same height. Nevertheless the concept of patio allows a wide variety of settlements. Its worth is based on the transference of a renowned idea into a new context, producing thus a reformulation of the problem. The patio is frequently disposed like a zone with multiple utilities, from the leisure zone patio to an air circulating space, definitively it can be said that it consists on a space which is able to content a place. Maybe that is why it appears in various forms in our architecture, regardless of its placement or shape. It is simply a space which provides many features which are impossible to reach without it. That is what we know as patio house is a type of architecture which is spread till antiquity. This concept of outdoors space joined housing is one of the main pieces of our architecture. It is an idea wide analyses which lefts aside the different types of patios which were developed, focusing mainly the way they changed the idea of inhabiting. We have chosen for this analysis process, the collective housing, we understood collective like group, thus it is the group of housing responsible to built up a city, not just it is worth to give importance to an independent cell, in addition to the relation which those ones can stablish with their similar ones. Due to the idea of collectivity of patio houses, it can be also developed in vertical, looking for the previously mention condition. A wish which appeared with the modern movement and since then it has been something desired by architecture just nowadays. It is understood as the main target to follow the trail about a project investigation which was begun and left open by Le Cobustier: the task is discovering the resonances, the bounces and repercussions which belong to the patio concept in height through its history. In this quest to distinguish the characteristics of these spaces, we have chosen three cases, starting from the experiences as traditional patios as in the height of patios of the masters such as Le Cobustier, Jose Luis Sert and Charles Correa. The studied cases could be even more. This number is just an example of a huger universe, which has been operational for the developing of this work. We will be managed through their architecture trying to solve the idea of patios according to their height. Over this analysis evidences there are found multiple mechanics used in the studied cases. As we could see later, in these ones there are characteristics which are only found in an outdoors space when it is a patio. The studied patios are considered traditional patios, independently of the level they have, although they do not fit at first some of the necessary characteristics included in a patio definition. To catch the essence of those spaces, it is not necessary to go through its limits, since it is transmitted to the interior and pervades the adjoining spaces. It has been analyzed the project influences exiting among several cases which build up part of this consideration , among them there are some clear links, which may be these keys we are looking for to solve the joint of patio houses in height. With this work it has been highlighted that the application of the patios houses in height concept depends not only on its placement, the weather and the local culture, but also on the type of patio we are using. From these considerations different solutions were given by themselves as consequence they can be extrapolated into a single idea for all the cases. Some ideas are present along the complete investigation: facades resulting from cells repetition, series of spaces, traditional patio house floor, double height… Some other cases stand out due to it singularity, because they have searched for a solution to the problem by means of originality. To sum up, we look for patio houses in height. And if this thesis contributes, in some way, to get the clues to make work this type of building, about its characteristics, its necessities and its result, in other words, its searching of this modern desire that we showed at the beginning, then this imaginary typo will be a real architecture therefore it can also come truth and can abandon the form of wish to became into a reality. So the modern desire has been fulfilled.

COMUNIDADES ECLESIAIS DE BASE: EDUCAÇÃO POPULAR E CONSCIENTIZAÇÃO NO ABC (1964-1985)

Esta dissertação procurou apreender que consciência, ou consciências, formaram as Comunidades Eclesiais de Base CEBs com a apropriação das orientações da Educação Popular e da Teologia da Libertação durante o Regime Militar brasileiro. Entretanto, diferente da maioria dos trabalhos que se voltam a essa experiência, o estudo elaborou uma abordagem que as colocaram em prismas diversos. Focalizou, inicialmente, o momento histórico e algumas experiências nos vinte anos de regime e, em seguida, a Educação Popular e a Teologia da Libertação (teoria e prática), objetivando compreender seus projetos político-pedagógicos. A reflexão sobre a Educação Popular e a Teologia da Libertação aliada à reconstituição histórica do período forneceram o contexto no qual se inseriu a análise pretendida: a observação do fenômeno educacional numa perspectiva de micro-análise retratando os processos sociais e as experiências vividas para conhecer a consciência que emergiu de tal experiência educacional. Neste sentido, a pesquisa inferiu, por meio da análise de uma comunidade em particular, que a consciência nascida de tal prática foi de curto alcance, uma vez que os sujeitos envolvidos nesse projeto conscientizador perceberam apenas a ausência imediata de direitos.(AU)

COMUNIDADES ECLESIAIS DE BASE: EDUCAÇÃO POPULAR E CONSCIENTIZAÇÃO NO ABC (1964-1985)

Esta dissertação procurou apreender que consciência, ou consciências, formaram as Comunidades Eclesiais de Base CEBs com a apropriação das orientações da Educação Popular e da Teologia da Libertação durante o Regime Militar brasileiro. Entretanto, diferente da maioria dos trabalhos que se voltam a essa experiência, o estudo elaborou uma abordagem que as colocaram em prismas diversos. Focalizou, inicialmente, o momento histórico e algumas experiências nos vinte anos de regime e, em seguida, a Educação Popular e a Teologia da Libertação (teoria e prática), objetivando compreender seus projetos político-pedagógicos. A reflexão sobre a Educação Popular e a Teologia da Libertação aliada à reconstituição histórica do período forneceram o contexto no qual se inseriu a análise pretendida: a observação do fenômeno educacional numa perspectiva de micro-análise retratando os processos sociais e as experiências vividas para conhecer a consciência que emergiu de tal experiência educacional. Neste sentido, a pesquisa inferiu, por meio da análise de uma comunidade em particular, que a consciência nascida de tal prática foi de curto alcance, uma vez que os sujeitos envolvidos nesse projeto conscientizador perceberam apenas a ausência imediata de direitos.(AU)

Proteins unfold in steps

I present results from an experiment on the dynamics of folding of a globular protein (bovine serum albumin). Employing a micro-mechanical technique, I perform the measurements on very few molecules (1–100). I observed a sequence of steps in time for both unfolding and refolding. The overall characteristic time of the process is thus built up of waiting times between successive steps. The pattern of steps is reproducible, demonstrating the existence of deterministic pathways for folding and unfolding. Certain symmetries in the patterns of steps may reflect the architecture of the protein’s structure.

A model of long-term memory storage in the cerebellar cortex: A possible role for plasticity at parallel fiber synapses onto stellate/basket interneurons

By evoking changes in climbing fiber activity, movement errors are thought to modify synapses from parallel fibers onto Purkinje cells (pf*Pkj) so as to improve subsequent motor performance. Theoretical arguments suggest there is an intrinsic tradeoff, however, between motor adaptation and long-term storage. Assuming a baseline rate of motor errors is always present, then repeated performance of any learned movement will generate a series of climbing fiber-mediated corrections. By reshuffling the synaptic weights responsible for any given movement, such corrections will degrade the memories for other learned movements stored in overlapping sets of synapses. The present paper shows that long-term storage can be accomplished by a second site of plasticity at synapses from parallel fibers onto stellate/basket interneurons (pf*St/Bk). Plasticity at pf*St/Bk synapses can be insulated from ongoing fluctuations in climbing fiber activity by assuming that changes in pf*St/Bk synapses occur only after changes in pf*Pkj synapses have built up to a threshold level. Although climbing fiber-dependent plasticity at pf*Pkj synapses allows for the exploration of novel motor strategies in response to changing environmental conditions, plasticity at pf*St/Bk synapses transfers successful strategies to stable long-term storage. To quantify this hypothesis, both sites of plasticity are incorporated into a dynamical model of the cerebellar cortex and its interactions with the inferior olive. When used to simulate idealized motor conditioning trials, the model predicts that plasticity develops first at pf*Pkj synapses, but with additional training is transferred to pf*St/Bk synapses for long-term storage.

What was natural in the coastal oceans?

Humans transformed Western Atlantic coastal marine ecosystems before modern ecological investigations began. Paleoecological, archeological, and historical reconstructions demonstrate incredible losses of large vertebrates and oysters from the entire Atlantic coast. Untold millions of large fishes, sharks, sea turtles, and manatees were removed from the Caribbean in the 17th to 19th centuries. Recent collapses of reef corals and seagrasses are due ultimately to losses of these large consumers as much as to more recent changes in climate, eutrophication, or outbreaks of disease. Overfishing in the 19th century reduced vast beds of oysters in Chesapeake Bay and other estuaries to a few percent of pristine abundances and promoted eutrophication. Mechanized harvesting of bottom fishes like cod set off a series of trophic cascades that eliminated kelp forests and then brought them back again as fishers fished their way down food webs to small invertebrates. Lastly, but most pervasively, mechanized harvesting of the entire continental shelf decimated large, long-lived fishes and destroyed three-dimensional habitats built up by sessile corals, bryozoans, and sponges. The universal pattern of losses demonstrates that no coastal ecosystem is pristine and few wild fisheries are sustainable along the entire Western Atlantic coast. Reconstructions of ecosystems lost only a century or two ago demonstrate attainable goals of establishing large and effective marine reserves if society is willing to pay the costs. Historical reconstructions provide a new scientific framework for manipulative experiments at the ecosystem scale to explore the feasibility and benefits of protection of our living coastal resources.

Differentiation of B cells in the nonlymphoid tissue of the synovial membrane of patients with rheumatoid arthritis.

In patients with rheumatoid arthritis the synovial membrane of the affected joint is infiltrated with lymphoid cells which may be arranged in structures resembling germinal centers. We have directly isolated such infiltrates to determine whether B-cell clones within them are selected and expanded in a process analogous to that which normally takes place in the germinal centers in secondary lymphoid organs. The data suggest that an antigen-driven process leads to the accumulation of B cells in the synovial membrane. The finding of identical sequences in consecutive sections suggests that under conditions of chronic stimulation, memory B cells may enter a stage of differentiation in which they proliferate without further accumulation of somatic mutations. Further we see intraclonal diversity which underlines the germinal center-like character of these infiltrates and demonstrates that a microenvironment is built up in this nonlymphoid tissue which supports antigen-dependent differentiation of B cells. This is the first demonstration, to our knowledge, of a germinal center-like reaction outside lymphoid tissue.

Reações fotoinduzidas em alguns complexos de rênio e desenvolvimento de dispositivos moleculares

Neste trabalho foi realizado o estudo do comportamento fotoquímico e fotofísico de complexos mononucleares de rênio do tipo fac-[Re(CO)3(N N)(L)]+(N N = 1,10-fenantrolina, phen, dipirido[3,2-a:2,3-c]fenazina, dppz, L= trans-1,2bis(4-piridil)etileno, trans-bpe, trans-4-estirilpiridina. trans-stpy) e dos complexos binucleares [(CO)3(phen)Re(trans-bpe)Re(phen)(CO)3]2+, [(CO)3(phen)Re(trans-bpe)Fe(CN5]2- e [(phen)(CO)3Re(trans-bpe)Os(terpy)(bpy)]3+. O enfoque principal deste trabalho é a investigação das propriedades fotoquímicas dos complexos fac-[ Re(CO)3(phen)(trans-bpe)]+, fac-[Re(CO)3(phen)(trans-stpy)]+ fac-[Re(CO)3(dppz)(trans-bpe)+ e [(CO)3(phen)Re(trans-bpe)Re(phen)(CO)3]2+. Observou-se que os compostos em solução de acetonitrila, sob irradiação a 313, 334 ou 365 nm, apresentam variação espectral com definição de pontos isosbésticos, resultante do processo de fotoisomerização trans→cis do ligante coordenado trans-piridil etileno. Os rendimentos quânticos, Φ, da reação de fotoisomerização foram calculados com base no decaimento espectral das bandas de absorção das transições eletrônicas. Os valores médios determinados para a fotoisomeriação dos complexos em solução de CH3CN variam de 0,15 - 0,39 sob excitação a 313 nm e de 0,12 - 0,33 sob excitação a 365 nm. As reações de fotoisomerização foram monitoradas também por medidas de emissão e por RMN de 1H. Observou-se um aumento da intensidade de luminescência com o tempo de irradiação dos complexos, consistente com o estado emissivo 3MLCT dπ[(Re)→π*(α-diimina). Após irradiação, as reações de fotoisomerização dos complexos foram monitoradas por RMN de 1H. Os sinais de prótons do isômero trans tiveram um decréscimo gradual, enquanto que a intensidade dos sinais referentes aos prótons da espécie cis aumentaram. Os rendimentos quânticos para o processo de fotoisomerização dos complexos foram calculados através da integração das áreas dos sinais de prótons. Os valores obtidos foram maiores, pelo menos o dobro, que aqueles valores obtidos via espectroscopia UV-Vis. O comportamento fotoquímico dos complexos incorporados em polimetacrilato de metila, PMMA, foi também investigado. A fotólise cios complexos em filmes de PMMA conduz à variação espectral, de absorção e emissão, similar àquela observada em solução de acetonitrila, atribuícla ao processo de fotoisomerização trans → cis do ligante coordenado. Este estudo mostra que a fotoisomerização do ligante coordenado trans-piridil etileno pode ser promovida também em meio rígido. Essa característica. típica de um dispositivo molecular, pode ser convenientemente explorada no desenvolvimento de fotossensores. As medidas de TRIR mostram que o estado excitado de menor energia para o fac-[Re(CO)3(phen)(trans-bpe)+ é o 3ππ*. Para o fac-[Re(CO)3(phen)(cis-bpe)]+ a ordem dos estados excitados aparecem invertidas com o 3MLCT <3ππ*, evidenciado pela emissão do complexo cis à temperatura ambiente. Nas espécies binucleares, [(phen) Re(CO)3(trans-bpe)Os(terpy)(bpy)]3+ e [(CO)3(phen)Re(trans-bpe)Fe(CN)5]2-, a fotoisomerização trans → cis do ligante coordenado trans-bpe, característica da subunidade fac-[Re(CO)3(phen)(trans-bpe)]+, é inibida pela competição de transferência de energia intramolecular. Em meio rígido, em PMMA ou em EPA a 77 K, os máximos de emissão dos complexos fac-[Re(CO)3(phen)(cis-bpe)]+, fac-[Re(CO)3(phen)(cis-stpy)r e [(CO)3(phen)Re(cis-bpe)Re(phen)(CO)3]2+ sofrem um deslocamento hipsocrômico com o aumento da rigidez do meio. As mudanças nas propriedades emissivas, em termos de energia e tempo de vida do estado excitado, são discutidas baseadas no efeito rigidocrômico luminescente. O trabalho mostra uma forma interessante de fotos sensibilizar um substrato orgâmco usando o fato de que a coordenação estende a absorção do ligante a uma região de comprimento de onda maior e promove a fotoisomerização assistida por complexos metálicos em energias menores.

Nanoarchitectures Based on Layered Titanosilicates Supported on Glass Fibers: Application to Hydrogen Storage

This work reports on the synthesis of nanosheets of layered titanosilicate JDF-L1 supported on commercial E-type glass fibers with the aim of developing novel nanoarchitectures useful as robust and easy to handle hydrogen adsorbents. The preparation of those materials is carried out by hydrothermal reaction from the corresponding gel precursor in the presence of the glass support. Because of the basic character of the synthesis media, silica from the silicate-based glass fibers can be involved in the reaction, cementing its associated titanosilicate and giving rise to strong linkages on the support with the result of very stable heterostructures. The nanoarchitectures built up by this approach promote the growth and disposition of the titanosilicate nanosheets as a house-of-cards radially distributed around the fiber axis. Such an open arrangement represents suitable geometry for potential uses in adsorption and catalytic applications where the active surface has to be available. The content of the titanosilicate crystalline phase in the system represents about 12 wt %, and this percentage of the adsorbent fraction can achieve, at 298 K and 20 MPa, 0.14 wt % hydrogen adsorption with respect to the total mass of the system. Following postsynthesis treatments, small amounts of Pd (<0.1 wt %) have been incorporated into the resulting nanoarchitectures in order to improve their hydrogen adsorption capacity. In this way, Pd-layered titanosilicate supported on glass fibers has been tested as a hydrogen adsorbent at diverse pressures and temperatures, giving rise to values around 0.46 wt % at 298 K and 20 MPa. A mechanism of hydrogen spillover involving the titanosilicate framework and the Pd nanoparticules has been proposed to explain the high increase in the hydrogen uptake capacity after the incorporation of Pd into the nanoarchitecture.

La palmera, elemento identitario en el paisaje de huerta del Bajo Segura

La palmera, por sus múltiples aprovechamientos (agrícola, constructivo, ritual e industrial), ha sido tradicionalmente un elemento identitario en el paisaje huertano del Bajo Segura. En las últimas décadas su presencia se ha restringido, al perder las funciones que antaño cumplía, a lo que se ha unido la plaga del picudo rojo y la comercialización masiva con fines ornamentales para las nuevas áreas residenciales. El artículo aborda la presencia de esta especie en el territorio desde diversas visiones y en diferentes épocas: la estética de la literatura de viajes, la productiva de los tratados científicos o la emocional de las obras de creación.

Orleans, France, ca. 1680 (Raster Image)

This layer is a georeferenced raster image of the historic paper map entitled: Plan de la ville d'Orleans : comme il est aujourd'huy, où sont representées en elevation les églises, palais et autres edifices. It was published by Chez le Sr. Iselin, au bas du Pont au Change between 1680 and 1715. Scale [ca. 1:4,625]. Map in French.The image inside the map neatline is georeferenced to the surface of the earth and fit to the European Datum 1950, Universal Transverse Mercator (UTM) Zone 31N projected coordinate system. All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, index maps, legends, or other information associated with the principal map. This map shows features such as roads, drainage, built-up areas and selected buildings, fortifications, ground cover, and more. Selected features shown pictorially. Includes also a brief history of the city.This layer is part of a selection of digitally scanned and georeferenced historic maps from the Harvard Map Collection. These maps typically portray both natural and manmade features. The selection represents a range of originators, ground condition dates, scales, and map purposes.