442 resultados para agile


Relevância:

10.00% 10.00%

Publicador:

Resumo:

Model-driven Engineering (MDE) approaches are often acknowledged to improve the maintainability of the resulting applications. However, there is a scarcity of empirical evidence that backs their claimed benefits and limitations with respect to code-centric approaches. The purpose of this paper is to compare the performance and satisfaction of junior software maintainers while executing maintainability tasks on Web applications with two different development approaches, one being OOH4RIA, a model-driven approach, and the other being a code-centric approach based on Visual Studio .NET and the Agile Unified Process. We have conducted a quasi-experiment with 27 graduated students from the University of Alicante. They were randomly divided into two groups, and each group was assigned to a different Web application on which they performed a set of maintainability tasks. The results show that maintaining Web applications with OOH4RIA clearly improves the performance of subjects. It also tips the satisfaction balance in favor of OOH4RIA, although not significantly. Model-driven development methods seem to improve both the developers’ objective performance and subjective opinions on ease of use of the method. This notwithstanding, further experimentation is needed to be able to generalize the results to different populations, methods, languages and tools, different domains and different application sizes.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Introducción: El baloncesto presenta una gran heterogeneidad antropométrica entre jugadores en relación a la posición de juego. El base suele ser el más bajo del equipo pero también el más rápido. El escolta suele ser similar al base, más bajo, rápido y ágil que el resto. El alero es de una altura intermedia entre los jugadores interiores y exteriores, combina la altura con la velocidad, y el pívot tiene un rol más físico, es el más alto y con mayor masa muscular. El objetivo del estudio es describir el perfil cineantropométrico del equipo cadete masculino del Valencia Basket Club. Material y Métodos: Se han evaluado 20 jugadores de baloncesto cadete masculino (15,35±0,59años). Un antropometrista nivel I tomó las medidas según la metodología de la Society for the Advancement of Kinanthropometry (ISAK). Se calculó la composición corporal según el consenso de cineantropometría del Grupo Español de Cineantropometría (GREC), el somatotipo según Heath-Carter, e índices adiposo-musculares. Resultados: Se observaron diferencias en los valores de peso, talla, pliegues cutáneos y composición corporal, de las variables estudiadas de la muestra total y por posición de juego, siendo los valores menores los de la posición base y mayores en los pívots. Se estableció una tendencia creciente de estos parámetros en el siguiente orden: base, escolta, alero y pívot. Conclusiones: El somatotipo global del jugador de baloncesto cadete del Valencia Basket Club es ectomorfo balanceado. Conocer el perfil cineantropométrico puede beneficiar la elaboración de planes de entrenamiento y nutrición, así como reflejar la evolución y dirigirla hacia las características ligadas al rendimiento óptimo.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Trabalho de Projeto apresentado à Escola Superior de Tecnologia do Instituto Politécnico de Castelo Branco para cumprimento dos requisitos necessários à obtenção do grau de Mestre em Desenvolvimento de Software e Sistemas Interactivos, realizada sob a orientação científica do Professor Doutor José Carlos Metrôlho, do Instituto Politécnico de Castelo Branco.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Summary. Belgium is on the cusp of its next defence reform. While the security landscape throughout Europe’s neighbourhood and beyond deteriorates, the armed forces face numerous challenges. Most importantly, the next defence plan needs to recalibrate the force structure in function of political ambitions and budgetary realities. This Policy Brief argues that Belgium must embrace a nimble but broad-spectrum force. Any future structure must encompass agile land forces as well as a modern combat air force, without neglecting the need to safeguard a sizeable navy and invest in cyber capabilities. European cooperation should be pursued wherever possible while recognising that this necessitates budgetary convergence. For Belgium this means the investment budget needs to grow significantly in order to acquire interoperable but self-owned assets. Such a choice can be justified on the recognition that defence is not just about expeditionary operations, but also economic stimulus, intergenerational solidarity and strategic insurance: maintaining the ability to respond to whatever the future may bring.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Relatório de estágio apresentada para cumprimento dos requisitos necessários à obtenção do grau de Mestre em Sistemas de Informação Organizacionais

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Abstract Mobile Edge Computing enables the deployment of services, applications, content storage and processing in close proximity to mobile end users. This highly distributed computing environment can be used to provide ultra-low latency, precise positional awareness and agile applications, which could significantly improve user experience. In order to achieve this, it is necessary to consider next-generation paradigms such as Information-Centric Networking and Cloud Computing, integrated with the upcoming 5th Generation networking access. A cohesive end-to-end architecture is proposed, fully exploiting Information-Centric Networking together with the Mobile Follow-Me Cloud approach, for enhancing the migration of content-caches located at the edge of cloudified mobile networks. The chosen content-relocation algorithm attains content-availability improvements of up to 500 when a mobile user performs a request and compared against other existing solutions. The performed evaluation considers a realistic core-network, with functional and non-functional measurements, including the deployment of the entire system, computation and allocation/migration of resources. The achieved results reveal that the proposed architecture is beneficial not only from the users’ perspective but also from the providers point-of-view, which may be able to optimize their resources and reach significant bandwidth savings.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Deep-water benthic ostracodes from the Pliocene-Pleistocene interval of ODP Leg 107, Hole 654A (Tyrrhenian Sea) were studied. From a total of 106 samples, 40 species considered autochthonous were identified. Detailed investigations have established the biostratigraphic distribution of the most frequent ostracode taxa. The extinction levels of Agrenocythere pliocenica (a psychrospheric ostracode) in Hole 654A and in some Italian land sections lead to the conclusion that the removal of psychrospheric conditions took place in the Mediterranean Sea during or after the time interval corresponding to the Small Gephyrocapsa Zone (upper part of early Pleistocene), and not at the beginning of the Quaternary, as previously stated. Based on a reduced matrix of quantitative data of 63 samples and 20 variables of ostracodes, four varimax assemblages were extracted by a Q-mode factor analysis. Six factors and eight varimax assemblages were recognized from the Q-mode factor analysis of the quantitative data of 162 samples and 47 variables of the benthic foraminifers. The stratigraphic distributions of the varimax assemblages of the two faunistic groups were plotted against the calcareous plankton biostratigraphic scheme and compared in order to trace the relationship between the benthic foraminifers and ostracodes varimax assemblages. General results show that the two populations, belonging to quite different taxa, display almost coeval changes along the Pliocene-Pleistocene sequence of Hole 654A, essentially induced by paleoenvironmental modifications. Mainly on the base of the benthic foraminifer assemblages (which are quantitatively better represented than the ostracode assemblages), it is possible to identify such modifications as variations in sedimentation depth and in bottom oxygen content.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Paperbound.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

We conducted a demographic and genetic study to investigate the effects of fragmentation due to the establishment of an exotic softwood plantation on populations of a small marsupial carnivore, the agile antechinus (Antechinus agilis), and the factors influencing the persistence of those populations in the fragmented habitat. The first aspect of the study was a descriptive analysis of patch occupancy and population size, in which we found a patch occupancy rate of 70% among 23 sites in the fragmented habitat compared to 100% among 48 sites with the same habitat characteristics in unfragmented habitat. Mark-recapture analyses yielded most-likely population size estimates of between 3 and 85 among the 16 occupied patches in the fragmented habitat. Hierarchical partitioning and model selection were used to identify geographic and habitat-related characteristics that influence patch occupancy and population size. Patch occupancy was primarily influenced by geographic isolation and habitat quality (vegetation basal area). The variance in population size among occupied sites was influenced primarily by forest type (dominant Eucalyptus species) and, to a lesser extent, by patch area and topographic context (gully sites had larger populations). A comparison of the sex ratios between the samples from the two habitat contexts revealed a significant deficiency of males in the fragmented habitat. We hypothesise that this is due to male-biased dispersal in an environment with increased dispersal-associated mortality. The population size and sex ratio data were incorporated into a simulation study to estimate the proportion of genetic diversity that would have been lost over the known timescale since fragmentation if the patch populations had been totally isolated. The observed difference in genetic diversity (gene diversity and allelic richness at microsatellite and mitochondrial markers) between 16 fragmented and 12 unfragmented sites was extremely low and inconsistent with the isolation of the patch populations. Our results show that although the remnant habitat patches comprise approximately 2% of the study area, they can support non-isolated populations. However, the distribution of agile antechinus populations in the fragmented system is dependent on habitat quality and patch connectivity. (C) 2004 Elsevier Ltd. All rights reserved.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Large and powerful ocean predators such as swordfishes, some tunas, and several shark species are unique among fishes in that they are capable of maintaining elevated body temperatures (endothermy) when hunting for prey in deep and cold water [1-3]. In these animals, warming the central nervous system and the eyes is the one common feature of this energetically costly adaptation [4]. In the swordfish (Xiphias gladius), a highly specialized heating system located in an extraocular muscle specifically warms the eyes and brain up to 10degreesC-15degreesC above ambient water temperatures [2, 5]. Although the function of neural warming in fishes has been the subject of considerable speculation [1, 6, 7], the biological significance of this unusual ability has until now remained unknown. We show here that warming the retina significantly improves temporal resolution, and hence the detection of rapid motion, in fast-swimming predatory fishes such as the swordfish. Depending on diving depth, temporal resolution can be more than ten times greater in these fishes than in fishes with eyes at the same temperature as the surrounding water. The enhanced temporal resolution allowed by heated eyes provides warm-blooded and highly visual oceanic predators, such as swordfishes, tunas, and sharks, with a crucial advantage over their agile, cold-blooded prey.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This article reports the use of simple beam and finite-element models to investigate the relationship between rostral shape and biomechanical performance in living crocodilians under a range of loading conditions. Load cases corresponded to simple biting, lateral head shaking, and twist feeding behaviors. The six specimens were chosen to reflect, as far as possible, the full range of rostral shape in living crocodilians: a juvenile Caiman crocodilus, subadult Alligator mississippiensis and Crocodylus johnstoni, and adult Caiman crocodilus, Melanosuchus niger, and Paleosuchus palpebrosus. The simple beam models were generated using morphometric landmarks from each specimen. Three of the finite-element models, the A. mississippiensis, juvenile Caiman crocodilus, and the Crocodylus johnstoni, were based on CT scan data from respective specimens, but these data were not available for the other models and so these-the adult Caiman crocodilus, M. niger, and P. palpebrosus-were generated by morphing the juvenile Caiman crocodilus mesh with reference to three-dimensional linear distance measured from specimens. Comparison of the mechanical performance of the six finite-element models essentially matched results of the simple beam models: relatively tall skulls performed best under vertical loading and tall and wide skulls performed best under torsional loading. The widely held assumption that the platyrostral (dorsoventrally flattened) crocodilian skull is optimized for torsional loading was not supported by either simple beam theory models or finite-element modeling. Rather than being purely optimized against loads encountered while subduing and processing food, the shape of the crocodilian rostrum may be significantly affected by the hydrodynamic constraints of catching agile aquatic prey. This observation has important implications for our understanding of biomechanics in crocodilians and other aquatic reptiles.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Global Software Development (GSD) is an emerging distributive software engineering practice, in which a higher communication overhead due to temporal and geographical separation among developers is traded with gains in reduced development cost, improved flexibility and mobility for developers, increased access to skilled resource-pools and convenience of customer involvements. However, due to its distributive nature, GSD faces many fresh challenges in aspects relating to project coordination, awareness, collaborative coding and effective communication. New software engineering methodologies and processes are required to address these issues. Research has shown that, with adequate support tools, Distributed Extreme Programming (DXP) – a distributive variant of an agile methodology – Extreme Programming (XP) can be both efficient and beneficial to GDS projects. In this paper, we present the design and realization of a collaborative environment, called Moomba, which assists a distributed team in both instantiation and execution of a DXP process in GSD projects.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Editorial: The Managing Innovative Manufacturing (MIM) conference series started in 1993 in the UK. The first MIM conference was held at Keele University and, as from the second MIM at Leicester University in 1996, it became a biennial event with the University of Nottingham and Aston University hosting, respectively, the third and fourth conferences. The main areas of interest of the MIM conference series are: Manufacturing Strategy; Technology & Innovation Management; Human Resource Management; Organisation of Work; Product Design; Operations Planning and Control; Supply Chain Management; Performance Management. This special issue of the International Journal of Technology Management is based on selected papers from MIM2000 at Aston University, where it was organised by Aston Business School. The special theme of the Aston conference was Responsive Production and the Agile Enterprise. Altogether 82 papers were presented in parallel sessions. The eight papers included here were selected from the ‘Technology and Innovation’ stream. They have all been independently reviewed and revised before being accepted for publication. The authors of these papers are from the UK, Ireland, Turkey, the USA, the Netherlands and Hong Kong. They address a wide range of issues within the overall scope of Technology and Innovation with some papers having a geographical or sector focus and others being more general in nature. Participation in the MIM conferences has become increasingly international and to reflect this, the 2002 event is leaving the UK and being held at the University of Wisconsin-Milwaukee, in the USA. It is planned to hold the following MIM at the University of Aalborg, Denmark, in 2004.