Experimental and numerical evaluation of composite repairs on wood beams damaged by cross-graining

An experimental and Finite Element study was performed on the bending behaviour of wood beams of the Pinus Pinaster species repaired with adhesively-bonded carbon–epoxy patches, after sustaining damage by cross-grain failure. This damage is characterized by crack growth at a small angle to the beams longitudinal axis, due to misalignment between the wood fibres and the beam axis. Cross-grain failure can occur in large-scale in a wood member when trees that have grown spirally or with a pronounced taper are cut for lumber. Three patch lengths were tested. The simulations include the possibility of cohesive fracture of the adhesive layer, failure within the wood beam in two propagation planes and patch interlaminar failure, by the use of cohesive zone modelling. The respective cohesive properties were estimated either by an inverse method or from the literature. The comparison with the tests allowed the validation of the proposed methodology, opening a good perspective for the reduction of costs in the design stages of these repairs due to extensive experimentation.

Adhesively-bonded repair proposal for wood members damaged by horizontal shear using carbon-epoxy patches

In this work, a repair technique with adhesively bonded carbon-epoxy patches is proposed for wood members damaged by horizontal shear and under bending loads. This damage is characterized by horizontal crack growth near the neutral plane of the wood beam, normally originating from checks and shakes. The repair consists of adhesively bonded carbon-epoxy patches on the vertical side faces of the beam at the cracked region to block sliding between the beam arms. An experimental and numerical parametric analysis was performed on the patch length. The numerical analysis used the finite element method (FEM) and cohesive zone models (CZMs), with an inverse modelling technique for the characterization of the adhesive layer. Trapezoidal cohesive laws in each pure mode were used to account for the ductility of the adhesive used. To fully reproduce the tests, horizontal damage propagation within the wood beam was also simulated. A good correlation with the experiments was found. Regarding the effectiveness of the repair, for the conditions selected for this work, a full strength recovery was achieved for the bigger value of patch length tested.

Reactivity of syringyl and guaiacyl lignin units and delignification kinetics in the kraft pulping of eucalyptus globulus wood using Py-Gc-Ms/FID

Eucalyptus globulus sapwood and heartwood showed no differences in lignin content (23.0% vs. 23.7%) and composition: syringyl-lignin (17.9% vs. 18.0%) and guaiacyl-lignin (4.8% vs. 5.2%). Delignification kinetics of S- and G-units in heartwood and sapwood was investigated by Py-GC–MS/FID at 130, 150 and 170 °C and modeled as double first-order reactions. Reactivity differences between S and G-units were small during the main pulping phase and the higher reactivity of S over G units was better expressed in the later pulping stage. The residual lignin composition in pulps was different from wood or from samples in the initial delignification stages, with more G and H-units. S/G ratio ranged from 3 to 4.5 when pulp residual lignin was higher than 10%, decreasing rapidly to less than 1. The S/H was initially around 20 (until 15% residual lignin), decreasing to 4 when residual lignin was about 3%.

Location model for CCA-treated - wood waste remediation units

Dissertação apresentada como requisito parcial para obtenção do grau de Mestre em Ciência e Sistemas de Informação Geográfica

The 1853-1856 cholera morbus epidemic in Portugal as seen by the press

This research is part of a larger project focused on producing a History of the Popularization of Science and Technology in Portugal. The goal is to find out how scientific knowledge reached the common people in the nineteenth century, using newspapers as the main source of information. Keeping in mind the population’s limited access to written material, nevertheless each newspaper could be read daily by an estimate 30.000 people in Lisbon, which places this source as probably the most widespread vehicle to divulge the latest scientific news at the time to an unspecialised audience. With a cholera morbus epidemic which affected the second largest Portuguese town and all the northern regions, as well as the Algarve, news and reports on its evolution were considered essential. A large database was built in order to analyse the news concerning this disease in 1855 and 1856, especially the ones about prevention and treatment. These are important historical sources that give us real information on the scientific knowledge of the time and the way it was used by society.

Experimental Reinforcement of Wood Beams

Rehabilitation is becoming more and more usual in the construction sector in Portugal. The introduction of newer construction materials and technical know-how of integrating different materials for achieving desired engineering goals is an important step to the development of the sector. Wood industry is also getting more and more adapted to composite technologies with the introduction of the so called “highly engineered wood products” and with the use of modification treatments. This work is an attempt to explain the viability of using stainless steel and glass fibre reinforced polymer (GFRP) as reinforcements in wood beams. This thesis specifically focuses on the flexural behaviour of Portuguese Pine unmodified and modified wood beams. Two types of modification were used: 1,3-dimethylol-4,5- dihydroxyethyleneurea (DMDHEU) resin and amid wax. The behaviour of the material was analysed with a nonlinear model. The latter model simulates the behaviour of the reinforced wood beams under flexural loading. Small-scale beams (1:15) were experimented in flexural bending and the experimental results obtained were compared with the analytical model results. The experiments confirm the viability of the reinforcing schemes and the working procedures. Experimental results showed fair agreement with the nonlinear model. A strength increase between 15% and 80% was achieved. Stiffness increased by 40% to 50% in beams reinforced with steel but no significant increase was achieved with the glass fibre reinforcement.

O papel da causa final no mecanicismo de Robert Boyle

Dissertação apresentada para cumprimento dos requisitos necessários à obtenção do grau de Mestre em Filosofia Geral

Robert Schumann: “o autor prolongado” Implicações do pensamento do primeiro romantismo alemão no Lied de Schumann

Dissertação apresentada para cumprimento dos requisitos necessários à obtenção do grau de Mestre em Filosofia (Área de especialização Estética)

Moral Mazes: the world of corporate managers (20th anniversary edition) [Robert Jackall]

Recensão do livro Moral Mazes: the world of corporate managers (20th anniversary edition) [Robert Jackall], 2010, Oxford University Press, Nova Iorque

Landscape composition and climatic parameters significant in the spread of an invasive species (Pine wood Nematode)

Dissertação para obtenção do Grau de Mestre em Engenharia do Ambiente

MANGROVE BARK: A RENEWABLE RESIN SOURCE FOR WOOD ADHESIVES

From four solutions tested to extract tannins from mangrove bark for wood adhesives, hot water is recommended. Hot water extracted 21.4% of formaldehyde-hydrochloric acid reactive polyphenols on oven-dry bark basis.

Nutritional preferences of wood-feeding termites inhabiting floodplain forests of the Amazon River, Brazil

The alimentary preferences of five species of wood-feeding termites of the genus Nasutitermes that coexist in the inundated forests of the floodplains of the Amazon river várzea for species of fresh wood and for wood in different stages of decomposition was evaluated in laboratory tests. Wood of low density was generally preferred; the decay stages were preferred over fresh wood. The five termite species differ in the amplitude of their choices, indicating a strong differentiation in food choice among them. Differences in feeding preferences may be a niche-separating factor for these five Nasutitermes species of the floodplains.