Ensayo de correlación entre los parámetros geofísicos e hidrológicos de los depósitos volcánicos de la Caldera de Bandama (Gran Canaria)

[EN]The geometry and the hydraulic conductivity of the unsaturated zone is difficult to study from traditional techniques, like samples from trenches that normally provide surficial data or boreholes, that are expensive and provide local information. Non-destructive geophysical techniques and among them the electrical resistivity tomography method can be applicable in volcanic areas, where the lava flows and pyroclastic deposits have a wide range of values depending on the degree of fracturing and weathering of lava flows, and porosity and texture of the pyroclastic deposits. In order to characterize the subsurface geology below the golf course of Bandama (Gran Canaria) has conducted a campaign of electrical resistivity tomography profiles.

Physical and mineralogical changes of Hungarian monumental stones exposed to different conditions: stone-testing in-situ and under laboratory conditions

The Székesfehérvár Ruin Garden is a unique assemblage of monuments belonging to the cultural heritage of Hungary due to its important role in the Middle Ages as the coronation and burial church of the Kings of the Hungarian Christian Kingdom. It has been nominated for “National Monument” and as a consequence, its protection in the present and future is required. Moreover, it was reconstructed and expanded several times throughout Hungarian history. By a quick overview of the current state of the monument, the presence of several lithotypes can be found among the remained building and decorative stones. Therefore, the research related to the materials is crucial not only for the conservation of that specific monument but also for other historic structures in Central Europe. The current research is divided in three main parts: i) description of lithologies and their provenance, ii) physical properties testing of historic material and iii) durability tests of analogous stones obtained from active quarries. The survey of the National Monument of Székesfehérvár, focuses on the historical importance and the architecture of the monument, the different construction periods, the identification of the different building stones and their distribution in the remaining parts of the monument and it also included provenance analyses. The second one was the in situ and laboratory testing of physical properties of historic material. As a final phase samples were taken from local quarries with similar physical and mineralogical characteristics to the ones used in the monument. The three studied lithologies are: fine oolitic limestone, a coarse oolitic limestone and a red compact limestone. These stones were used for rock mechanical and durability tests under laboratory conditions. The following techniques were used: a) in-situ: Schmidt Hammer Values, moisture content measurements, DRMS, mapping (construction ages, lithotypes, weathering forms) b) laboratory: petrographic analysis, XRD, determination of real density by means of helium pycnometer and bulk density by means of mercury pycnometer, pore size distribution by mercury intrusion porosimetry and by nitrogen adsorption, water absorption, determination of open porosity, DRMS, frost resistance, ultrasonic pulse velocity test, uniaxial compressive strength test and dynamic modulus of elasticity. The results show that initial uniaxial compressive strength is not necessarily a clear indicator of the stone durability. Bedding and other lithological heterogeneities can influence the strength and durability of individual specimens. In addition, long-term behaviour is influenced by exposure conditions, fabric and, especially, the pore size distribution of each sample. Therefore, a statistic evaluation of the results is highly recommended and they should be evaluated in combination with other investigations on internal structure and micro-scale heterogeneities of the material, such as petrographic observation, ultrasound pulse velocity and porosimetry. Laboratory tests used to estimate the durability of natural stone may give a good guidance to its short-term performance but they should not be taken as an ultimate indication of the long-term behaviour of the stone. The interdisciplinary study of the results confirms that stones in the monument show deterioration in terms of mineralogy, fabric and physical properties in comparison with quarried stones. Moreover stone-testing proves compatibility between quarried and historical stones. Good correlation is observed between the non-destructive-techniques and laboratory tests results which allow us to minimize sampling and assessing the condition of the materials. Concluding, this research can contribute to the diagnostic knowledge for further studies that are needed in order to evaluate the effect of recent and future protective measures.

Durability of crystalline monumental stones in terms of their petrophysical characteristics

The durability of stone building materials is an issue of utmost importance in the field of monument conservation. In order to be able to preserve our built cultural heritage, the thorough knowledge of its constituent materials and the understanding of the processes that affect them are indispensable. The main objective of this research was to evaluate the durability of a special stone type, the crystalline stones, in correlation with their intrinsic characteristics, the petrophysical properties. The crystalline stones are differentiated from the cemented stones on the basis of textural features. Their most important specific property is the usually low, fissure-like porosity. Stone types of significant monumental importance, like the marble or granite belong to this group. The selected materials for this investigation, indeed, are a marble (Macael marble, Spain) and a granite (Silvestre Vilachán granite, Spain). In addition, an andesite (Szob andesite, Hungary) also of significant monumental importance was selected. This way a wide range of crystalline rocks is covered in terms of petrogenesis: stones of metamorphic, magmatic and volcanic origin, which can be of importance in terms of mineralogical, petrological or physical characteristics. After the detailed characterization of the petrophysical properties of the selected stones, their durability was assessed by means of artificial ageing. The applied ageing tests were: the salt crystallization, the frost resistance in pure water and in the presence of soluble salts, the salt mist and the action of SO2 in the presence of humidity. The research aimed at the understanding of the mechanisms of each weathering process and at finding the petrophysical properties most decisive in the degradation of these materials. Among the several weathering mechanisms, the most important ones were found to be the physical stress due to crystallization pressure of both salt and ice, the thermal fatigue due to cyclic temperature changes and the chemical reactions (mostly the acidic attack) between the mineral phases and the external fluids. The properties that fundamentally control the degradation processes, and thus the durability of stones were found to be: the mineralogical and chemical composition; the hydraulic properties especially the water uptake, the permeability and the drying; the void space structure, especially the void size and aperture size distribution and the connectivity of the porous space; and the thermal and mechanical properties. Because of the complexity of the processes and the high number of determining properties, no mechanisms or characteristics could be identified as typical for crystalline stones. The durability or alterability of each stone type must be assessed according to its properties and not according to the textural or petrophysical classification they belong to. Finally, a critical review of standardized methods is presented, based on which an attempt was made for recommendations of the most adequate methodology for the characterization and durability assessment of crystalline stones.

Petrographie und Geochemie des Eckfelder Maares und von Hillscheid und die Einbindung in den Hocheifelvulkanismus

Tertiäre Vulkanite aus dem Eckfelder Maar, dem Hillscheider Diatrem und dem Hillscheid Basalt (Schlot) wurden petrologisch und geochemisch untersucht. Bis auf tonige Klasten aus dem Bohrkern des Eckfelder Maares handelt es sich bei allen weiteren Proben um undifferenzierte basische Vulkanite. Die tonigen Klasten aus dem Bohrkern müssen der ehemaligen Landoberfläche vor der Eruption des Eckfelder Maares zugerechnet werden, in dessen Krater sie während der Eruption hineingefallen sind. Bis auf die Proben des Hillscheid Basaltes sind die Proben alteriert. Die Alteration zeigt sich an der Bildung von Zeolithen und Calcitmineralisationen, die primär und sekundär gebildete Hohlräume aufgefüllt haben oder an einer vertonten Grundmasse der Proben, die daneben Mineraleinschlüsse (Spinell) und kantige Fremdgesteinsbruchstücke enthalten können. Bei den Proben mit vertonter Grundmasse handelt es sich um Palagonite, Umwandlungsprodukte aus Sideromelan (basaltischem Glas). Geochemische Analysen an Grundmassepräparaten der alterierten bis vertonten Proben zeigen, dass außer den immobilen Elementen Ti, Nb, Zr, Y alle weiteren Elemente teilweise bis vollständig abgereichert worden sind. Eine Ausnahme bildet Barium (Ba), welches z.T. in beträchtlichen Mengen in Zeolithen (Harmotom) angereichert wurde. Bei den Proben aus dem Eckfelder Maar kann die Alteration bis Vertonung der Proben alleine mit der Palagonitisierung und Verwitterung erklärt werden. Es gibt keine Hinweise auf Materialzufuhr und damit für sich anschließende hydrothermale Prozesse. Die Proben des Hillscheider Diatrem sind wesentlich geringer alteriert (glasige Grundmasse). Neuste Erkenntnisse aus einer Bohrung im Sommer 1999 im vermuteten Zentrum des Hillscheider Diatrems beschränken das Diatrem maximal auf einen kleineren Bereich im Nordosten der bisherigen Lokation. Bei der Bohrung stieß man nach 20 Meter auf Anstehendes. Im Hangschutt darüber fand man Blöcke des Hillscheid Basaltes. Eine geringere Größe der Lokation zusammen mit der geringen Alteration könnten auf deren Entstehung mit einer initialen Maarphase gefolgt von Schlackentätigkeit hinweisen. Die Schlacken könnten die ersten Ablagerungen vor Verwitterung geschützt haben. Allerdings gibt es keine Funde die eine Schlackentätigkeit belegen. Beim sogenannten 'Hillscheider Diatrem' könnte es sich aber auch um Hangschutt aus der Randbreccie des Hillscheider Basaltes handeln. Zusammen mit Bruchstücken aus dem Schlot des Hillscheid Basaltes wären die Palagonite des sogenannten 'Hillscheider Diatrem' erst in jüngster Zeit im Bereich einer Uferböschung zur Ablagerung gekommen. Dies würde allerdings das sogenannte 'Hillscheider Diatrem' in seiner Existenz in Frage stellen. Vergleiche der Proben des Hillscheid Basaltes mit basischen Hocheifelvulkaniten deuten auf kogenetische Beziehung aller Proben untereinander und ordnen die Proben des Hillscheid Basaltes geochemisch dem Hocheifelvulkanismus zu. REE- und weitere Spurenelementgehalte und auch deren Elementverhältnisse weisen für alle tertiären Eifelvulkanite gemeinsam auf Mantelschmelzen aus dem Bereich eines Granatperidotits mit niedrigen Aufschmelzgraden um ein Prozent hin. Vergleich der Elementverhältnisse hochinkompatibler Elemente im Bezug auf die Bildung mafischer Schmelzen mit primitivem Mantel deuten darauf hin, dass der Mantel im Bereich der Hocheifel verarmt ist an K, Rb, Sr und angereichert an Ba und eventuell an Nb. Ursachen für diese von typisch primären Mantelzusammensetzung abweichenden Verhältnisse könnten durch Mischungen von Mantelschmelzen mit lithosphärischem Mantel (K-Anomalie) und durch Anreicherungen mit fluiden Phasen (Ba-Anomalie) oder auch Schmelzen aus einem tieferliegenden Plume (Kelberger Hoch) verursacht worden sein. Englischer Zusammenfassung:

Valutazione del rischio di contaminazione di corsi d'acqua da rilasci accidentali di idrocarburi.

Nella definizione di incidente rilevante presente nelle Direttive Seveso, come pure nel loro recepimento nella legislazione italiana, rientrano eventi incidentali che abbiano conseguenze gravi per il bersaglio “ambiente”, sia in concomitanza sia in assenza di effetti dannosi per l’uomo. Tuttavia, a fronte di questa attenzione al bersaglio “ambiente” citata dalle norme, si constata la mancanza di indici quantitativi per la stima del rischio di contaminazione per i diversi comparti ambientali e, conseguentemente, anche di metodologie per il loro calcolo. Misure di rischio quantitative consolidate e modelli condivisi per la loro stima riguardano esclusivamente l’uomo, con la conseguenza che la valutazione di rischio per il bersaglio “ambiente” rimane ad un livello qualitativo o, al più, semi-quantitativo. Questa lacuna metodologica non consente di dare una piena attuazione al controllo ed alla riduzione del rischio di incidente rilevante, secondo l’obiettivo che le norme stesse mirano a raggiungere. E d‘altra parte il verificarsi periodico di incidenti con significativi effetti dannosi per l’ambiente, quali, ad esempio lo sversamento di gasolio nel fiume Lambro avvenuto nel febbraio 2010, conferma come attuale e urgente il problema del controllo del rischio di contaminazione ambientale. La ricerca presentata in questo lavoro vuole rappresentare un contributo per colmare questa lacuna. L’attenzione è rivolta al comparto delle acque superficiali ed agli sversamenti di liquidi oleosi, ovvero di idrocarburi insolubili in acqua e più leggeri dell’acqua stessa. Nel caso in cui il rilascio accidentale di un liquido oleoso raggiunga un corso d’acqua superficiale, l’olio tenderà a formare una chiazza galleggiante in espansione trasportata dalla corrente e soggetta ad un complesso insieme di trasformazioni fisiche e chimiche, denominate fenomeni di “oil weathering”. Tra queste rientrano l’evaporazione della frazione più volatile dell’olio e la dispersione naturale dell’olio in acqua, ovvero la formazione di una emulsione olio-in-acqua nella colonna d’acqua al di sotto della chiazza di olio. Poiché la chiazza si muove solidale alla corrente, si può ragionevolmente ritenere che l’evaporato in atmosfera venga facilmente diluito e che quindi la concentrazione in aria dei composti evaporati non raggiunga concentrazioni pericolose esternamente alla chiazza stessa. L’effetto fisico dannoso associato allo sversamento accidentale può pertanto essere espresso in doversi modi: in termini di estensione superficiale della chiazza, di volume di olio che emulsifica nella colonna d’acqua, di volume della colonna che si presenta come emulsione olio-in-acqua, di lunghezza di costa contaminata. In funzione di questi effetti fisici è possibile definire degli indici di rischio ambientale analoghi alle curve di rischio sociale per l’uomo. Come una curva di rischio sociale per l’uomo esprime la frequenza cumulata in funzione del numero di morti, così le curve di rischio sociale ambientale riportano la frequenza cumulata in funzione dell’estensione superficiale della chiazza, ovvero la frequenza cumulata in funzione del volume di olio che emulsifica in acqua ovvero la frequenza cumulata in funzione del volume di colonna d’acqua contaminato ovvero la frequenza cumulata in funzione della lunghezza di costa contaminata. Il calcolo degli indici di rischio così definiti può essere effettuato secondo una procedura analoga al calcolo del rischio per l’uomo, ovvero secondo i seguenti passi: 1) descrizione della sorgente di rischio; 2) descrizione del corso d’acqua che può essere contaminato in caso di rilascio dalla sorgente di rischio; 3) identificazione, degli eventi di rilascio e stima della loro frequenza di accadimento; 4) stima, per ogni rilascio, degli effetti fisici in termini di area della chiazza, di volume di olio emulsificato in acqua, di volume dell’emulsione olio-in-acqua, lunghezza di costa contaminata; 5) ricomposizione, per tutti i rilasci, degli effetti fisici e delle corrispondenti frequenze di accadimento al fine di stimare gli indici di rischio sopra definiti. Al fine di validare la metodologia sopra descritta, ne è stata effettuata l’applicazione agli stabilimenti a rischio di incidente rilevante presenti nei bacini secondari che fanno parte del bacino primario del Po. E’ stato possibile calcolare gli indici di rischio per ogni stabilimento, sia in riferimento al corso d’acqua del bacino secondario a cui appartengono, sia in riferimento al Po, come pure ottenere degli indici di rischio complessivi per ogni affluente del Po e per il Po stesso. I risultati ottenuti hanno pienamente confermato la validità degli indici di rischio proposti al fine di ottenere una stima previsionale del rischio di contaminazione dei corsi d’acqua superficiali, i cui risultati possano essere utilizzati per verificare l’efficacia di diverse misure di riduzione del rischio e per effettuare una pianificazione d’emergenza che consenta, in caso di incidente, di contenere, recuperare e favorire la dispersione dell’olio sversato.

Quantifizierung von Steinschlagrisiken an Straßen

Thema: Quantifizierung von Steinschlagrisiken an Straßen Die Einschätzung eines bestehenden Steinschlagrisikos an Verkehrswegen ist in Gebirgs- und Mittelgebirgsregionen seit jeher eine Aufgabe, die mit verschiedensten Methoden und unterschiedlichem Aufwand bearbeitet wird. In der vorliegenden Untersuchung werden die maßgebenden Parameter zur Beschreibung einer Böschung aufgenommen und bewertet. Es wurde ein Arbeitsblatt entwickelt, in dem festgelegte Parameter erfasst werden, die teils mit Ankreuztechnik, teils mit der Eingabe von Daten, im Computer notiert werden. Das Arbeitsblatt umfasst vier Themenbereiche: Allgemeine Daten, Angaben zur Geometrie der Böschung, Angaben zum Verkehr und Angaben zum Gestein und Gebirge. Ein Computerprogramm, das auf der Basis der Software Excel von Microsoft erstellt wurde, vergibt nach der Dateneingabe Bewertungspunkte (1. Bewertungsschritt). Es werden Summen gebildet und die Teilbereiche bewertet (2. Bewertungsschritt). Jeder Teilbereich besitzt drei Bewertungsklassen. Die Verknüpfung der Bewertung der Teilbereiche Geometrische Angaben und Angaben zum Gestein und Gebirge stellt die eigentliche Risikoeinschätzung dar (3. Bewertungsschritt). Es gibt drei Einstufungen zur Beschreibung des Risikos: ð Der Verkehr ist durch Steinschlag sehr gering gefährdet. ð Der Verkehr ist durch Steinschlag gering gefährdet. Eine Detailüberprüfung muss erfolgen, da eine Gefährdung nicht auszuschließen ist. ð Der Verkehr ist gefährdet. Es besteht ein hohes Steinschlagrisiko. Bewertungen und Hinweise zu den Teilbereichen Allgemeine Daten und Angaben zum Verkehr kann der Anwender nach eigenem Ermessen zusätzlich nutzen. Die abschließende Risikoeinschätzung erfolgt durch den Anwender bzw. einen Sachverständigen.

The release of zinc and lead from mine tailings

Mining and processing of metal ores are important causes of soil and groundwater contamination in many regions worldwide. Metal contaminations are a serious risk for the environment and human health. The assessment of metal contaminations in the soil is therefore an important task. A common approach to assess the environmental risk emanating from inorganic contaminations to soil and groundwater is the use of batch or column leaching tests. In this regard, the suitability of leaching tests is a controversial issue. In the first part of this work the applicability and comparability of common leaching tests in the scope of groundwater risk assessment of inorganic contamination is reviewed and critically discussed. Soil water sampling methods (the suction cup method and centrifugation) are addressed as an alternative to leaching tests. Reasons for limitations of the comparability of leaching test results are exposed and recommendations are given for the expedient application of leaching tests for groundwater risk assessment. Leaching tests are usually carried out in open contact with the atmosphere disregarding possible changes of redox conditions. This can affect the original metal speciation and distribution, particularly when anoxic samples are investigated. The influence of sample storage on leaching test results of sulfide bearing anoxic material from a former flotation dump is investigated in a long-term study. Since the oxidation of the sulfide-bearing samples leads to a significant overestimation of metal release, a feasible modification for the conduction of common leaching tests for anoxic material is proposed, where oxidation is prevented efficiently. A comparison of leaching test results to soil water analyzes have shown that the modified saturation soil extraction (SSE) is found to be the only of the tested leaching procedures, which can be recommended for the assessment of current soil water concentrations at anoxic sites if direct investigation of the soil water is impossible due to technical reasons. The vertical distribution and speciation of Zn and Pb in the flotation residues as well as metal concentrations in soil water and plants were investigated to evaluate the environmental risk arising from this site due to the release of metals. The variations in pH and inorganic C content show an acidification of the topsoil with pH values down to 5.5 in the soil and a soil water pH of 6 in 1 m depth. This is due to the oxidation of sulfides and depletion in carbonates. In the anoxic subsoil pH conditions are still neutral and soil water collected with suction cups is in equilibrium with carbonate minerals. Results from extended x-ray absorption fine-structure (EXAFS) spectroscopy confirm that Zn is mainly bound in sphalerite in the subsoil and weathering reactions lead to a redistribution of Zn in the topsoil. A loss of 35% Zn and S from the topsoil compared to the parent material with 10 g/kg Zn has been observed. 13% of total Zn in the topsoil can be regarded as mobile or easily mobilizable according to sequential chemical extractions (SCE). Zn concentrations of 10 mg/L were found in the soil water, where pH is acidic. Electron supply and the buffer capacity of the soil were identified as main factors controlling Zn mobility and release to the groundwater. Variable Pb concentrations up to 30 µg/L were observed in the soil water. In contrast to Zn, Pb is enriched in the mobile fraction of the oxidized topsoil by a factor of 2 compared to the subsoil with 2 g/kg Pb. 80% of the cation exchange capacity in the topsoil is occupied by Pb. Therefore, plant uptake and bioavailability are of major concern. If the site is not prevented from proceeding acidification in the future, a significant release of Zn, S, and Pb to the groundwater has to be expected. Results from this study show that the assessment of metal release especially from sulfide bearing anoxic material requires an extensive comprehension of leaching mechanisms on the one hand and on weathering processes, which influence the speciation and the mobility of metals, on the other hand. Processes, which may change redox and pH conditions in the future, have to be addressed to enable sound decisions for soil and groundwater protection and remediation.

Distribuzione delle Terre Rare nelle acque destinate all’alimentazione umana

La distribuzione delle Terre Rare (REE) nell’ambiente deriva da una serie di processi interagenti all’interno di un sistema dinamico che include il ciclo idrologico, attività geologiche, fisiche – chimiche (weathering), fenomeni atmosferici e attività umane. Queste contribuiscono alla dispersione superficiale di tutti gli elementi e in particolare di quelli in traccia tra cui i lantanidi (La, Ce, Pr, Nd, Pm, Sm, Eu, Gd, Tb, Dy, Tm, Ho, Er, Yb e Lu) che si ritrovano un po’ ovunque in tutte le matrici, frazionate in modo diverso. L’acqua destinata al consumo alimentare è una di queste. Prelevata di solito da acquiferi profondi, superficiali o da pozzi posti in differenti contesti litologici, può essere soggetta a modifiche importanti delle proprietà fisiche-chimiche e microbiologiche. Più acque minerali relative a marche differenti e conservate in bottiglie di vetro e PET messe a confronto, hanno dimostrato che il vetro è in grado di rilasciare numerosi elementi in funzione della tipologia di acqua contenuta, del tipo di vetro (chiaro o colorato) e delle condizioni predisponenti il rilascio (proprietà intrinseche dell’elemento, fattori esterni quali fonti di calore, ecc.). Terre rare come Ce, La, Pr, Nd, Sm, Eu, Er, Dy, Y e Sc possono essere ceduti in modo differenziale nell’acqua delle bottiglie. In più casi l’arricchimento è evidenziato da acque nelle quali è stata aggiunta anidride carbonica, mentre non si notano cambiamenti eccessivi nel corrispettive naturali. Per i contenitori in PET si registra un marcato rilascio di antimonio (Sb), ampiamente usato sotto forma di triossido di antimonio nel ciclo produttivo delle plastiche. Rispetto alle acque minerali, quelle di rubinetto soffrono gli effetti dei trattamenti di potabilizzazione e dell’interazione con il sistema di distribuzione idrico. La distribuzione dei lantanidi è influenzata dalle condizioni redox (particolarmente per Ce, ed Eu) e dalla relativa capacità di essere complessati e, quindi, mobilizzati in maniera differente. Nonostante il forte impatto delle attività umane, i valori anomali di alcuni (Gd, Nd) sono nell’ordine dei ng/L, come del resto per tutti gli altri e non costituiscono un pericolo per la salute umana. Al fattore geogenico si attribuiscono i tenori maggiori (ΣREE >1000ng/L) riscontrati in Sardegna.

Corrosione atmosferica in area urbana-costiera di un acciaio Cor-Ten: studio del rilascio in ambiente dei metalli di lega

Cor-Ten is a particular kind of steel, belonging to low-alloyed steel; thanks to his aesthetic features and resistance to atmospheric corrosion, this material is largely used in architectural, artistic and infrastructural applications. After environmental exposure, Cor-Ten steel exhibits the characteristic ability to self-protect from corrosion, by the development of a stable and adherent protective layer. However, some environmental factors can influence the formation and stability of the patina. In particular, exposure of Cor-Ten to polluted atmosphere (NOx, SOx, O3) or coastal areas (marine spray) may cause problems to the protective layer and, as a consequence, a release of alloying metals, which can accumulate near the structures. Some of these metals, such as Cr and Ni, could be very dangerous for soils and water because of their large toxicity. The aim of this work was to study the corrosion behavior of Cor-Ten exposed to an urban-coastal site (Rimini, Italy). Three different kinds of commercial surface finish (bare and pre-patinated, with or without a beeswax covering) were examined, both in sheltered and unsheltered exposure conditions. Wet deposition brushing the specimens surface (leaching solutions) are monthly collected and analyzed to evaluate the extent of metal release and the form in which they leave the surface, for example, as water-soluble compounds or non-adherent corrosion products. Five alloying metals (Fe, Cu, Cr, Mn and Ni) and nine ions (Cl-, NO3-, NO2-, SO42-, Na+, Ca2+, K+, Mg2+, NH4+) are determined through Atomic Absorption Spectroscopy and Ion Chromatography, respectively. Furthermore, the evolution and the behaviour of the patina are periodically followed by surface investigations (SEM-EDS and Raman Spectroscopy). After two years of exposure, the results show that Bare Cor-Ten, cheaper than the other analyzed specimens, even though undergoes the greater mass variation, his metal release is comparable to the release of the pre-patinated samples. The behavior of pre-patinated steel, with or without beeswax covering, do not show particular difference. This exposure environment doesn’t allow a completely stabilization of the patina; nevertheless an estimate of metal release after 10 years of exposure points out that the environmental impact of Cor-Ten is very low: for example, the release of chromium in the soluble fraction is less than 10 mg if we consider an exposed wall of 10 m2.

Mediterranean-type climate in the South Aegean (Eastern Mediterranean) during the Late Miocene: Evidence from isotope and element proxies

The present-day climate in the Mediterranean region is characterized by mild, wet winters and hot, dry summers. There is contradictory evidence as to whether the present-day conditions (“Mediterranean climate”) already existed in the Late Miocene. This thesis presents seasonally-resolved isotope and element proxy data obtained from Late Miocene reef corals from Crete (Southern Aegean, Eastern Mediterranean) in order to illustrate climate conditions in the Mediterranean region during this time. There was a transition from greenhouse to icehouse conditions without a Greenland ice sheet during the Late Miocene. Since the Greenland ice sheet is predicted to melt fully within the next millennia, Late Miocene climate mechanisms can be considered as useful analogues in evaluating models of Northern Hemispheric climate conditions in the future. So far, high resolution chemical proxy data on Late Miocene environments are limited. In order to enlarge the proxy database for this time span, coral genus Tarbellastraea was evaluated as a new proxy archive, and proved reliable based on consistent oxygen isotope records of Tarbellastraea and the established paleoenvironmental archive of coral genus Porites. In combination with lithostratigraphic data, global 87Sr/86Sr seawater chronostratigraphy was used to constrain the numerical age of the coral sites, assuming the Mediterranean Sea to be equilibrated with global open ocean water. 87Sr/86Sr ratios of Tarbellastraea and Porites from eight stratigraphically different sampling sites were measured by thermal ionization mass spectrometry. The ratios range from 0.708900 to 0.708958 corresponding to ages of 10 to 7 Ma (Tortonian to Early Messinian). Spectral analyses of multi-decadal time-series yield interannual δ18O variability with periods of ~2 and ~5 years, similar to that of modern records, indicating that pressure field systems comparable to those controlling the seasonality of present-day Mediterranean climate existed, at least intermittently, already during the Late Miocene. In addition to sea surface temperature (SST), δ18O composition of coral aragonite is controlled by other parameters such as local seawater composition which as a result of precipitation and evaporation, influences sea surface salinity (SSS). The Sr/Ca ratio is considered to be independent of salinity, and was used, therefore, as an additional proxy to estimate seasonality in SST. Major and trace element concentrations in coral aragonite determined by laser ablation inductively coupled plasma mass spectrometry yield significant variations along a transect perpendicular to coral growth increments, and record varying environmental conditions. The comparison between the average SST seasonality of 7°C and 9°C, derived from average annual δ18O (1.1‰) and Sr/Ca (0.579 mmol/mol) amplitudes, respectively, indicates that the δ18O-derived SST seasonality is biased by seawater composition, reducing the δ18O amplitude by 0.3‰. This value is equivalent to a seasonal SSS variation of 1‰, as observed under present-day Aegean Sea conditions. Concentration patterns of non-lattice bound major and trace elements, related to trapped particles within the coral skeleton, reflect seasonal input of suspended load into the reef environment. δ18O, Sr/Ca and non-lattice bound element proxy records, as well as geochemical compositions of the trapped particles, provide evidence for intense precipitation in the Eastern Mediterranean during winters. Winter rain caused freshwater discharge and transport of weathering products from the hinterland into the reef environment. There is a trend in coral δ18O data to more positive mean δ18O values (–2.7‰ to –1.7‰) coupled with decreased seasonal δ18O amplitudes (1.1‰ to 0.7‰) from 10 to 7 Ma. This relationship is most easily explained in terms of more positive summer δ18O. Since coral diversity and annual growth rates indicate more or less constant average SST for the Mediterranean from the Tortonian to the Early Messinian, more positive mean and summer δ18O indicate increasing aridity during the Late Miocene, and more pronounced during summers. The analytical results implicate that winter rainfall and summer drought, the main characteristics of the present-day Mediterranean climate, were already present in the Mediterranean region during the Late Miocene. Some models have argued that the Mediterranean climate did not exist in this region prior to the Pliocene. However, the data presented here show that conditions comparable to those of the present-day existed either intermittently or permanently since at least about 10 Ma.

Copper and zinc stable isotope ratios as tracers of biogeochemical processes, sources and transport of Cu and Zn in soils

Copper and Zn are essential micronutrients for plants, animals, and humans; however, they may also be pollutants if they occur at high concentrations in soil. Therefore, knowledge of Cu and Zn cycling in soils is required both for guaranteeing proper nutrition and to control possible risks arising from pollution.rnThe overall objective of my study was to test if Cu and Zn stable isotope ratios can be used to investigate into the biogeochemistry, source and transport of these metals in soils. The use of stable isotope ratios might be especially suitable to trace long-term processes occurring during soil genesis and transport of pollutants through the soil. In detail, I aimed to answer the questions, whether (1) Cu stable isotopes are fractionated during complexation with humic acid, (2) 65Cu values can be a tracer for soil genetic processes in redoximorphic soils (3) 65Cu values can help to understand soil genetic processes under oxic weathering conditions, and (4) 65Cu and 66Zn values can act as tracers of sources and transport of Cu and Zn in polluted soils.rnTo answer these questions, I ran adsorption experiments at different pH values in the laboratory and modelled Cu adsorption to humic acid. Furthermore, eight soils were sampled representing different redox and weathering regimes of which two were influenced by stagnic water, two by groundwater, two by oxic weathering (Cambisols), and two by podzolation. In all horizons of these soils, I determined selected basic soil properties, partitioned Cu into seven operationally defined fractions and determined Cu concentrations and Cu isotope ratios (65Cu values). Finally, three additional soils were sampled along a deposition gradient at different distances to a Cu smelter in Slovakia and analyzed together with bedrock and waste material from the smelter for selected basic soil properties, Cu and Zn concentrations and 65Cu and 66Zn values.rnMy results demonstrated that (1) Copper was fractionated during adsorption on humic acid resulting in an isotope fractionation between the immobilized humic acid and the solution (65CuIHA-solution) of 0.26 ± 0.11‰ (2SD) and that the extent of fractionation was independent of pH and involved functional groups of the humic acid. (2) Soil genesis and plant cycling causes measurable Cu isotope fractionation in hydromorphic soils. The results suggested that an increasing number of redox cycles depleted 63Cu with increasing depth resulting in heavier 65Cu values. (3) Organic horizons usually had isotopically lighter Cu than mineral soils presumably because of the preferred uptake and recycling of 63Cu by plants. (4) In a strongly developed Podzol, eluviation zones had lighter and illuviation zones heavier 65Cu values because of the higher stability of organo-65Cu complexes compared to organo-63Cu complexes. In the Cambisols and a little developed Podzol, oxic weathering caused increasingly lighter 65Cu values with increasing depth, resulting in the opposite depth trend as in redoximorphic soils, because of the preferential vertical transport of 63Cu. (5) The 66Zn values were fractionated during the smelting process and isotopically light Zn was emitted allowing source identification of Zn pollution while 65Cu values were unaffected by the smelting and Cu emissions isotopically indistinguishable from soil. The 65Cu values in polluted soils became lighter down to a depth of 0.4 m indicating isotope fractionation during transport and a transport depth of 0.4 m in 60 years. 66Zn values had an opposite depth trend becoming heavier with depth because of fractionation by plant cycling, speciation changes, and mixing of native and smelter-derived Zn. rnCopper showed measurable isotope fractionation of approximately 1‰ in unpolluted soils, allowing to draw conclusions on plant cycling, transport, and redox processes occurring during soil genesis and 65Cu and 66Zn values in contaminated soils allow for conclusions on sources (in my study only possible for Zn), biogeochemical behavior, and depth of dislocation of Cu and Zn pollution in soil. I conclude that stable Cu and Zn isotope ratios are a suitable novel tool to trace long-term processes in soils which are difficult to assess otherwise.rn

Diversity of lithologic components at Meridiani Planum, Mars: Insights from Mössbauer spectroscopic investigations

The two Mars Exploration Rovers (MER), Spirit and Opportunity, landed on the Martian surface in January 2004 and have since collected a wealth of information about their landing sites. As part of their payload, the miniaturised Mössbauer spectrometer MIMOS II contributes to the success of the mission by identifying Iron-bearing minerals and by determining Iron oxidation states in them. The basis of this work is the data set obtained at Opportunity’s landing site at Meridiani Planum. A portion of this data set is evaluated with different methods, with the aim to thoroughly characterize lithologic components at Meridiani Planum and possible relations between them.rnMIMOS II is able to measure Mössbauer spectra at different energies simultaneously, bearing information from different sampling depths of the investigated target. The ability of depth-selective Mössbauer spectroscopy to characterize weathered surface layers is illustrated through its application to two suitable rock targets that were investigated on Mars. In both cases, an enhanced concentration of Iron oxides at the rock surface was detected, pointing to a low degree of aqueous alteration. rnThe mineral hematite (α-Fe2O3) is present in the matrix of outcrop rocks and in spherules weathering from the outcrop. Simultaneous fitting of Mössbauer spectra was applied to data sets obtained on both target types to characterize the hematite component in detail. This approach reveals that two hematite populations are present, both in the outcrop matrix as well as in spherules. The hematite component with a comparably high degree of crystallinity and/or chemical purity is present in the outcrop matrix. The investigation of hematite at Meridiani Planum has shown that simultaneous fitting is a suitable and useful method to evaluate a large, correlated set of Mössbauer spectra.rnOpportunity encountered loose, cm-sized rocks along its traverse. Based on their composition and texture, these “cobbles” can be divided into three different groups. Outcrop fragments are impact-derived ejecta from local outcrop rocks. Cobbles of meteoritic origin contain the minerals kamacite (Fe,Ni) and troilite (FeS) and exhibit high Ni contents. Melt-bearing impact breccias bear similarities to local outcrop rocks and basaltic soil, with a phase composition and texture consistent with a formation scenario involving partial melting and inclusion of small, bright outcrop clasts. rnIron meteorites on the Martian surface experience weathering through the presence of even trace amounts of water due to their metallic nature. Opportunity encountered and investigated four Iron meteorites, which exhibit evidence for physical and chemical weathering. Discontinuous coatings contain Iron oxides, pointing to the influence of limited amounts of water. rnA terrestrial analogue site for Meridiani Planum is the Rio Tinto basin in south-west Spain. With its deposits of sulfate- and iron-oxide-bearing minerals, the region provides an adequate test bed for instrumentation for future Mars missions. In-situ investigations at Rio Tinto were carried out with a special focus on the combined use of Mössbauer spectroscopy with MIMOS II and Raman spectroscopy with a field-portable instrument. The results demonstrate that the two instruments provide complementary information about investigated samples.

Speleogenesis and secondary cave minerals in quartz-sandstone and quartzite environment

The main objective of this research is to improve the comprehension of the processes controlling the formation of caves and karst-like morphologies in quartz-rich lithologies (more than 90% quartz), like quartz-sandstones and metamorphic quartzites. In the scientific community the processes actually most retained to be responsible of these formations are explained in the “Arenisation Theory”. This implies a slow but pervasive dissolution of the quartz grain/mineral boundaries increasing the general porosity until the rock becomes incohesive and can be easily eroded by running waters. The loose sands produced by the weathering processes are then evacuated to the surface through processes of piping due to the infiltration of waters from the fracture network or the bedding planes. To deal with these problems we adopted a multidisciplinary approach through the exploration and the study of several cave systems in different tepuis. The first step was to build a theoretical model of the arenisation process, considering the most recent knowledge about the dissolution kinetics of quartz, the intergranular/grain boundaries diffusion processes, the primary diffusion porosity, in the simplified conditions of an open fracture crossed by a continuous flow of undersatured water. The results of the model were then compared with the world’s widest dataset (more than 150 analyses) of water geochemistry collected till now on the tepui, in superficial and cave settings. All these studies allowed verifying the importance and the effectiveness of the arenisation process that is confirmed to be the main process responsible of the primary formation of these caves and of the karst-like superficial morphologies. The numerical modelling and the field observations allowed evaluating a possible age of the cave systems around 20-30 million of years.

Teos-based consolidants for stone conservation: evaluation of the effects and testing by x-ray imaging

Natural stones have been widely used in the construction field since antiquity. Building materials undergo decay processes due to mechanical,chemical, physical and biological causes that can act together. Therefore an interdisciplinary approach is required in order to understand the interaction between the stone and the surrounding environment. Utilization of buildings, inadequate restoration activities and in general anthropogenic weathering factors may contribute to this degradation process. For this reasons, in the last few decades new technologies and techniques have been developed and introduced in the restoration field. Consolidants are largely used in restoration and conservation of cultural heritage in order to improve the internal cohesion and to reduce the weathering rate of building materials. It is important to define the penetration depth of a consolidant for determining its efficacy. Impregnation mainly depends on the microstructure of the stone (i.e. porosity) and on the properties of the product itself. Throughout this study, tetraethoxysilane (TEOS) applied on globigerina limestone samples has been chosen as object of investigation. After hydrolysis and condensation, TEOS deposits silica gel inside the pores, improving the cohesion of the grains. X-ray computed tomography has been used to characterize the internal structure of the limestone samples,treated and untreated with a TEOS-based consolidant. The aim of this work is to investigate the penetration depth and the distribution of the TEOS inside the porosity, using both traditional approaches and advanced X-ray tomographic techniques, the latter allowing the internal visualization in three dimensions of the materials. Fluid transport properties and porosity have been studied both at macroscopic scale, by means of capillary uptake tests and radiography, and at microscopic scale,investigated with X-ray Tomographic Microscopy (XTM). This allows identifying changes in the porosity, by comparison of the images before and after the treatment, and locating the consolidant inside the stone. Tests were initially run at University of Bologna, where characterization of the stone was carried out. Then the research continued in Switzerland: X-ray tomography and radiography were performed at Empa, Swiss Federal Laboratories for Materials Science and Technology, while XTM measurements with synchrotron radiation were run at Paul Scherrer Institute in Villigen.

Process-based modelling of lichens and bryophytes and their role in global biogeochemical cycles

This thesis presents a process-based modelling approach to quantify carbon uptake by lichens and bryophytes at the global scale. Based on the modelled carbon uptake, potential global rates of nitrogen fixation, phosphorus uptake and chemical weathering by the organisms are estimated. In this way, the significance of lichens and bryophytes for global biogeochemical cycles can be assessed. The model uses gridded climate data and key properties of the habitat (e.g. disturbance intervals) to predict processes which control net carbon uptake, namely photosynthesis, respiration, water uptake and evaporation. It relies on equations used in many dynamical vegetation models, which are combined with concepts specific to lichens and bryophytes, such as poikilohydry or the effect of water content on CO2 diffusivity. To incorporate the great functional variation of lichens and bryophytes at the global scale, the model parameters are characterised by broad ranges of possible values instead of a single, globally uniform value. The predicted terrestrial net uptake of 0.34 to 3.3 Gt / yr of carbon and global patterns of productivity are in accordance with empirically-derived estimates. Based on the simulated estimates of net carbon uptake, further impacts of lichens and bryophytes on biogeochemical cycles are quantified at the global scale. Thereby the focus is on three processes, namely nitrogen fixation, phosphorus uptake and chemical weathering. The presented estimates have the form of potential rates, which means that the amount of nitrogen and phosphorus is quantified which is needed by the organisms to build up biomass, also accounting for resorption and leaching of nutrients. Subsequently, the potential phosphorus uptake on bare ground is used to estimate chemical weathering by the organisms, assuming that they release weathering agents to obtain phosphorus. The predicted requirement for nitrogen ranges from 3.5 to 34 Tg / yr and for phosphorus it ranges from 0.46 to 4.6 Tg / yr. Estimates of chemical weathering are between 0.058 and 1.1 km³ / yr of rock. These values seem to have a realistic order of magnitude and they support the notion that lichens and bryophytes have the potential to play an important role for global biogeochemical cycles.