Automatic spiral analysis for objective assessment of motor symptoms in Parkinson's disease

Objective: To develop a method for objective quantification of PD motor symptoms related to Off episodes and peak dose dyskinesias, using spiral data gathered by using a touch screen telemetry device. The aim was to objectively characterize predominant motor phenotypes (bradykinesia and dyskinesia), to help in automating the process of visual interpretation of movement anomalies in spirals as rated by movement disorder specialists. Background: A retrospective analysis was conducted on recordings from 65 patients with advanced idiopathic PD from nine different clinics in Sweden, recruited from January 2006 until August 2010. In addition to the patient group, 10 healthy elderly subjects were recruited. Upper limb movement data were collected using a touch screen telemetry device from home environments of the subjects. Measurements with the device were performed four times per day during week-long test periods. On each test occasion, the subjects were asked to trace pre-drawn Archimedean spirals, using the dominant hand. The pre-drawn spiral was shown on the screen of the device. The spiral test was repeated three times per test occasion and they were instructed to complete it within 10 seconds. The device had a sampling rate of 10Hz and measured both position and time-stamps (in milliseconds) of the pen tip. Methods: Four independent raters (FB, DH, AJ and DN) used a web interface that animated the spiral drawings and allowed them to observe different kinematic features during the drawing process and to rate task performance. Initially, a number of kinematic features were assessed including ‘impairment’, ‘speed’, ‘irregularity’ and ‘hesitation’ followed by marking the predominant motor phenotype on a 3-category scale: tremor, bradykinesia and/or choreatic dyskinesia. There were only 2 test occasions for which all the four raters either classified them as tremor or could not identify the motor phenotype. Therefore, the two main motor phenotype categories were bradykinesia and dyskinesia. ‘Impairment’ was rated on a scale from 0 (no impairment) to 10 (extremely severe) whereas ‘speed’, ‘irregularity’ and ‘hesitation’ were rated on a scale from 0 (normal) to 4 (extremely severe). The proposed data-driven method consisted of the following steps. Initially, 28 spatiotemporal features were extracted from the time series signals before being presented to a Multilayer Perceptron (MLP) classifier. The features were based on different kinematic quantities of spirals including radius, angle, speed and velocity with the aim of measuring the severity of involuntary symptoms and discriminate between PD-specific (bradykinesia) and/or treatment-induced symptoms (dyskinesia). A Principal Component Analysis was applied on the features to reduce their dimensions where 4 relevant principal components (PCs) were retained and used as inputs to the MLP classifier. Finally, the MLP classifier mapped these components to the corresponding visually assessed motor phenotype scores for automating the process of scoring the bradykinesia and dyskinesia in PD patients whilst they draw spirals using the touch screen device. For motor phenotype (bradykinesia vs. dyskinesia) classification, the stratified 10-fold cross validation technique was employed. Results: There were good agreements between the four raters when rating the individual kinematic features with intra-class correlation coefficient (ICC) of 0.88 for ‘impairment’, 0.74 for ‘speed’, 0.70 for ‘irregularity’, and moderate agreements when rating ‘hesitation’ with an ICC of 0.49. When assessing the two main motor phenotype categories (bradykinesia or dyskinesia) in animated spirals the agreements between the four raters ranged from fair to moderate. There were good correlations between mean ratings of the four raters on individual kinematic features and computed scores. The MLP classifier classified the motor phenotype that is bradykinesia or dyskinesia with an accuracy of 85% in relation to visual classifications of the four movement disorder specialists. The test-retest reliability of the four PCs across the three spiral test trials was good with Cronbach’s Alpha coefficients of 0.80, 0.82, 0.54 and 0.49, respectively. These results indicate that the computed scores are stable and consistent over time. Significant differences were found between the two groups (patients and healthy elderly subjects) in all the PCs, except for the PC3. Conclusions: The proposed method automatically assessed the severity of unwanted symptoms and could reasonably well discriminate between PD-specific and/or treatment-induced motor symptoms, in relation to visual assessments of movement disorder specialists. The objective assessments could provide a time-effect summary score that could be useful for improving decision-making during symptom evaluation of individualized treatment when the goal is to maximize functional On time for patients while minimizing their Off episodes and troublesome dyskinesias.

Corporal Punishment : A study about attitudes and opinions to corporal punishment and the connection to children’s rights in South Africa and Sweden

Corporal punishment is a worldwide problem. The purpose withthis thesis is to promote a constructive discussion about the problem andconnect this to children’s rights. This gives the possibility to start adiscussion about suggestions and measures to reduce the problem. Thetheory is that corporal punishment is used as a disciplinary method tochange behavior. Children’s rights is regulated by conventions and nationallaws. The method is to conduct an analysis with interpretations andcommentaries of the research materials from South Africa and Sweden.The conclusion is that those who are positive to corporal punishment thinksit is an efficient working method, and it is about children’s safety. Thosewho are negative have experienced that alternative methods works. Asuggestion is to involve children in the work with children’s rights andeducate them in human and children’s rights with focus on obligations andresponsibility.

Kommunal marknadsföring- Competitive identity och institutionell problematik : En komparativ fallstudie om två svenska kommuner och deras marknadsföring

Historiskt sett finns det etablerade normer i samhället som säger att en kommun endast ska bedriva traditionell kommunal verksamhet som innefattar att tillgodose välfärden (vård, skola & omsorg). Dock så har globaliseringen och urbaniseringen skapat en konkurrens om invånare vilket har lett till att kommuner idag bedriver en allt mer utvecklad marknadsföring för att attrahera fler invånare. Den här fallstudien innehåller två objekt (kommuner). Vi vill undersöka den kommunala marknadsföringen genom att fokusera på begreppen competitive identity (CI) och institutionell problematik (IP). Begreppet CI innehåller en teoretisk genomgång av komponenter i kommunal marknadsföring och IP beskriver kommunernas komplexa situation med olika institutionella krav. Genom att analysera dessa begrepp mot praktiska fall kan vi bidra till ökad förståelse om kommunal marknadsföring som är vårt syfte. Vi presenterar även en egen modell i samband med begreppet CI som ger en nyanserad bild av ämnet. Studiens resultat identifierar att kommunerna har speciella målgrupper som likt ett företag varierar beroende på deras ställning på marknaden. Genom skapandet av en CI deklarerar kommunen en önskvärd image där företeelser som inte bidrar till den blir exkluderade. Det gestaltar sig på olika sätt vilket analyseras grundligt i studien. Samtidigt illustreras motsägelsen när respondenterna i fallen säger att det är medborgarna som håller uppe imagen. Studien visar att det inte finns en enhetlig bild hur man som kommun ska hantera den institutionella komplexitet som uppstår. Fallen presenterar två olika synsätt som de finner mer lämpligt.

Estimated lifetimes of road pavements in Sweden using time-to-event analysis

Maintenance planning of road pavement requires reliable estimates of roads’ lifetimes. In determining the lifetime of a road, this study combines maintenance activities and road condition measurements. The scope of the paper is to estimate lifetimes of road pavements in Sweden with time to event analysis. The model used includes effects of pavement type, road type, bearing capacity, road width, speed limit, stone size and climate zone, where the model is stratified according to traffic load. Among the nine analyzed pavement types, stone mastic had the longest expected lifetime, 32 percent longer than asphalt concrete. Among road types, ordinary roads with cable barriers had 30 percent shorter lifetime than ordinary roads. Increased speed lowered the lifetime, while increased stone size (up to 20 mm) and increased road width lengthened the lifetime. The results are of importance for life cycle cost analysis and road management.

Barriers to adapt eCommerce by rural microenterprises in Sweden : a case study

Research has shown that small and medium-sized enterprises (SMEs) are rapidly adopting the e-commerce. However, there is nearly no research into how microenterprises are adopting eCommerce. Present paper focus on microenterprise adaption of eCommerce in terms of barriers in relation to already known research on SMEs. A case study, carried out by 12 microenterprises to find out barriers to adapt eCommerce had been done. The empirical results show that the microenterprises share most of the barriers to adapt the eCommerce with studies of SMEs, but also reveal additional factors affecting adaptation option of eCommerce; supplier agreement, communication and customer strategy. Conclusions are that microenterprises need additional support and communication and customer strategy to adapt eCommerce, depending of their requirement and needs of eCommerce.

Acupuncture for labour pain

Background: Acupuncture involves puncturing the skin with thin sterile needles at defined acupuncture points. Previous studies are inconclusive regarding the effect of acupuncture on labour pain, but some studies have found a reduction in the use of pharmacological pain relief when acupuncture is administered. The appropriate dose of acupuncture treatment required to elicit a potential effect on labour pain has not been fully explored. The dose is determined by many different factors, including the number of needles used and the intensity of the stimulation. In Sweden, manual stimulation of the needles is common practice when acupuncture is used for labour pain, but electrical stimulation of the needles, which gives a higher dose, could possibly be more effective. The overall aim of this thesis was to evaluate the effectiveness of acupuncture with manual stimulation (MA) of the needles as well as acupuncture with a combination of manual and electrical stimulation (EA) in reducing labour pain, compared with standard care without any form of acupuncture (SC). Methods: The study was designed as a three-armed randomised controlled trial in which 303 nulliparous women with normal pregnancies were randomised to MA, EA, or SC. The primary outcome was labour pain, assessed using the Visual Analogue Scale (VAS). Secondary outcomes were relaxation during labour, use of obstetric pain relief, and associations between maternal characteristics and labour pain and use of epidural analgesia respectively. Also, labour and infant outcomes, recollection of labour pain, and maternal experiences, such as birth experience and experience of the midwife, were investigated two months after the birth. The sample size calculation was based on the potential to discover a difference of 15 mm on the VAS. Data were collected during labour before the interventions, the day after birth, and two months later. Besides using the VAS, information was collected by means of study specific protocol, questionnaires and medical records. Results: The mean VAS scores were 66.4 in the MA group, 68.5 in the EA group, and 69.0 in the SC group (mean differences: MA vs. SC 2.6 95% CI -1.7 to 6.9, and EA vs. SC 0.6 95% CI -3.6 to 4.8). Other methods of pain relief were used less frequently in the EA group, including epidural analgesia, MA 61.4%, EA 46%, and SC 69.9%. (EA vs. SC OR 0.4 95% CI 0.2 to 0.7). No statistically significant differences were found in the recollection of labour pain between the three groups two months after birth (mean VAS score: MA 69.3, EA 68.7 and SC 70.1). A few maternal characteristics were associated with labour pain (age, dysmenorrhea, and cervix dilatation), but none of the investigated characteristics predicted the outcome of the acupuncture treatment in MA or EA. Women in the EA group experienced acupuncture as being effective for labour pain to a higher extent than women who received MA, MA 44.4%, EA 67.1% (EA vs. MA OR 2.4 95% CI 1.2 to 4.8). Women in the EA group also spent less time in labour (mean 500 min) than those who received MA (mean 619 min) and SC (mean 615 min) (EA vs. MA HR 1.4 95% CI 1.0 to1.9, EA vs. SC HR 1.4, 95% CI 1.1 to 2.0), and had less blood loss than women receiving SC, (EA vs. SC OR 0.1 95% CI 0.3 to 0.7). The women’s assessment of the midwife as being supportive during labour (MA 77.2%, EA 83.5%, SC 80%), overall satisfaction with midwife care (MA 100%, EA 97.5%, SC 98.7%), and having an overall positive childbirth experience (MA 64.6%, EA 61.0%, SC 54.3%) did not differ statistically. No serious side effects of the acupuncture treatment were reported. Conclusion: Acupuncture, regardless of type of stimulation, did not differ from standard care without acupuncture in terms of reducing women’s experience of pain during labour, or their memory of pain and childbirth overall two months after the birth. However, other forms of obstetric pain relief were less frequent in women receiving a combination of manual and electrical stimulation, suggesting that this method could facilitate coping with labour pain.

Demonstration of Solar Heating and Cooling System using Sorption Integrated Solar Thermal Collectors

Producing cost-competitive small and medium-sized solar cooling systems is currently a significant challenge. Due to system complexity, extensive engineering, design and equipment costs; the installation costs of solar thermal cooling systems are prohibitively high. In efforts to overcome these limitations, a novel sorption heat pump module has been developed and directly integrated into a solar thermal collector. The module comprises a fully encapsulated sorption tube containing hygroscopic salt sorbent and water as a refrigerant, sealed under vacuum with no moving parts. A 5.6m2 aperture area outdoor laboratory-scale system of sorption module integrated solar collectors was installed in Stockholm, Sweden and evaluated under constant re-cooling and chilled fluid return temperatures in order to assess collector performance. Measured average solar cooling COP was 0.19 with average cooling powers between 120 and 200 Wm-2 collector aperture area. It was observed that average collector cooling power is constant at daily insolation levels above 3.6 kWhm-2 with the cooling energy produced being proportional to solar insolation. For full evaluation of an integrated sorption collector solar heating and cooling system, under the umbrella of a European Union project for technological innovation, a 180 m2 large-scale demonstration system has been installed in Karlstad, Sweden. Results from the installation commissioned in summer 2014 with non-optimised control strategies showed average electrical COP of 10.6 and average cooling powers between 140 and 250 Wm-2 collector aperture area. Optimisation of control strategies, heat transfer fluid flows through the collectors and electrical COP will be carried out in autumn 2014.

On processing GPS tracking data of car-movements in Borlänge, Sweden

The advancement of GPS technology enables GPS devices not only to be used as orientation and navigation tools, but also to track travelled routes. GPS tracking data provides essential information for a broad range of urban planning applications such as transportation routing and planning, traffic management and environmental control. This paper describes on processing the data that was collected by tracking the cars of 316 volunteers over a seven-week period. The detailed information is extracted. The processed data is further connected to the underlying road network by means of maps. Geographical maps are applied to check how the car-movements match the road network. The maps capture the complexity of the car-movements in the urban area. The results show that 90% of the trips on the plane match the road network within a tolerance.

Rule versus interaction function : evaluating regional aggregations of commuting flows in Sweden

The aim of this paper is to evaluate the performance of two divergent methods for delineating commuting regions, also called labour market areas, in a situation that the base spatial units differ largely in size as a result of an irregular population distribution. Commuting patterns in Sweden have been analyzed with geographical information system technology by delineating commuting regions using two regionalization methods. One, a rule-based method, uses one-way commuting flows to delineate local labour market areas in a top-down procedure based on the selection of predefined employment centres. The other method, the interaction-based Intramax analysis, uses two-way flows in a bottom-up procedure based on numerical taxonomy principles. A comparison of these methods will expose a number of strengths and weaknesses. For both methods, the same data source has been used. The performance of both methods has been evaluated for the country as a whole using resident employed population, self-containment levels and job ratios for criteria. A more detailed evaluation has been done in the Goteborg metropolitan area by comparing regional patterns with the commuting fields of a number of urban centres in this area. It is concluded that both methods could benefit from the inclusion of additional control measures to identify improper allocations of municipalities.

Psychometric properties of the Swedish version of the Fear of Complications Questionnaire

Objectives: To translate and evaluate the psychometric properties of the Swedish version of the Fear of Complications Questionnaire. Design: Cross-sectional study design and scale development. Settings: Totally, 469 adults (response rate 63.5%) with Type 1 diabetes completed the questionnaires. Participants were recruited from two university hospitals in Sweden. Participants: Eligible patients were those who met the following inclusion criteria: diagnosed with Type 1 diabetes, diabetes duration of at least 1 year and aged at least 18 years. Methods: The Fear of Complications Questionnaire was translated using the forward-backward translation method. Factor analyses of the questionnaire were performed in two steps using both exploratory and confirmatory factor analysis. Convergent validity was examined using the Hospital Anxiety and Depression Scale and the Fear of Hypoglycaemia Fear Survey. Internal consistency was estimated using Cronbach’s alpha.Results: Exploratory factor analysis supported a two-factor solution. One factor contained three items having to do with fear of kidney-related complications and one factor included the rest of items concerning fear of other diabetes-related complications, as well as fear of complications in general. Internal consistency was high Cronbach’s alpha 0.96. The findings also gave support for convergent validity, with significant positive correlations between measures (r = 0.51 to 0.54). Conclusion: The clinical relevance of the identified two-factor model with a structure of one dominant subdomain may be considered. We suggest, however a one-factor model covering all the items as a relevant basis to assess fear of complications among people with Type 1 diabetes.

Teacher’s leadership in web-based language courses in Dalarna University, Sweden

The purpose of this presentation is to discuss how teacher’s leadership can be used as a teaching method in web based language education. The environments that offer online courses provide a wide field for discussion on the contact between teacher and student. My intention is to contribute to the debate on teacher leadership in online courses. In my earlier studies on leadership, I have explored how some religious leaders affected different social movements in Brazil during the military dictatorship (1964-1985). Pruth (2004) by examining the three kinds of legitimacy described by Max Weber I aimed at seeing and analyzing how religious leaders used different teaching methods to explain their messages to ordinary citizens. Thus my research showed how educational leadership is a way to get people to reach their goals. I became interested in the subject teacher’s leadership whenI participated in a survey of the teaching methods of language courses in Dalarna University which is funded by the NGL Center of Dalarna University. In  this project, we have made interviews with the teachers, undertaken the course plans (in the language department at Dalarna University) and categorized the learning outcomes. A questionnaire was constructed based on the learning outcomes and then either sent out remotely to teachers or completed face to face through interviews. The answers provided to the questionnaires enabled the  project to identify many differences in how language teachers interact with their students but  also, the way of giving feedback, motivating and helping students, types of class activities and materials used. This made me aware of how teachers use their leadership or not in their teaching. My focus is to look at the relationship between teachers and students as an important part of the development and quality of online courses. The teacher's performance on campus is different from online courses. I want to understand how the contact between teachers and students in online courses develop and look at how students can make use of this contact and what influence the teacher's leadership has on the ability for the students to achieve the goals of their course