1000 resultados para Tratamentos alternativos


Relevância:

20.00% 20.00%

Publicador:

Resumo:

O presente trabalho teve como objetivo avaliar a eficiência de diferentes combinações de tratamentos herbicidas integrado, aplicados em PPI, pré, pós, cultivo mecânico e jato dirigido em cultura de algodão (Gossypium hirsutum L.). O experimento foi conduzido em campo, sendo a área experimental instalada na cultura de algodão cultivar IAC-20. Foram testados tratamentos com os seguintes produtos: trifluralina na dose de 1,068 kg i.a./ha; alachlor na dose de 1,584 kg i.a./ha; M.S.M.A. nas doses de 1,44 e 1,68 kg i.a./ha; nicosulfuron nas doses de 0,0201; 0,030 e 0,040 kg i.a./ha; diuron nas doses de 1,0 e 1,5 kg i.a./ha; lactofen na dose de 0,18 kg i.a./ha; cyanazine nas doses de 1,0 e 1,5 kg i.a./ha e diuron nas doses de 1,0 e 1,5 kg i.a./ha.Os tratamentos herbicidas foram efetuados em pré-plantio incorporado (PPI), pré-emergência (PRE), pós-emergência (POS), cultivo mecânico (CM) e jato dirigido (JD). Os resultados obtidos levaram a concluir que o sistema de trifluralina (PPI), alachlor (PRE), CM, M.S.M.A. + lactofen apresentaram a maior produtividade. Os sistemas herbicidas compostos por aplicação de trifluralina (PPI), alachlor (PRE), M.S.M.A. (POS), CM ao redor dos 50 a 60 D.A.P. (dias após o plantio) e a aplicação de jato dirigido de diuron, lactofen + cyanazine, lactofen + diuron, M.S.M.A. + cyanazine, M.S.M.A. + lactofen e M.S.M.A. + diuron, propiciaram de forma geral controle das principais plantas daninhas.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

OBJETIVO: Apresentar revisão de literatura sobre o uso do copo/xícara como método alternativo de alimentação para recém-nascidos prematuros e verificar se há consenso sobre sua indicação para essa população. FONTES DE DADOS: Revisão de literatura narrativa, tendo sido selecionados artigos nas bases de dados Medline, Lilacs, SciELO e Cochrane, independentemente do ano, usando descritores específicos: alimentação artificial, recém-nascido prematuro, aleitamento materno, métodos de alimentação. SÍNTESE DOS DADOS: Apesar de alguns estudos afirmarem que o método do copo/xícara é eficaz e seguro para alimentar recém-nascidos pré-termo e a termo, tais estudos não avaliam de forma objetiva o efeito do método sobre a deglutição desses pacientes. CONCLUSÕES: Verificou-se não haver consenso na literatura quanto à complementação da alimentação de recém-nascidos prematuros por meio do copo/xícara. Estudos controlados devem ser realizados com a finalidade de rever riscos e benefícios do uso de métodos alternativos na alimentação do recém-nascido prematuro.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

O Brasil, terceiro maior produtor de biodiesel do mundo e terceiro maior produtor mundial de frango, pode incrementar, na sua matriz energética, o uso de óleo oriundo de aves como alternativa aos combustíveis fósseis e à redução da dependência do óleo de soja para esse fim. O país dispõe de mais de 350 milhões de litros de óleo de frango por ano. Considerando a aplicação dos combustíveis alternativos para os motores a diesel, em máquinas agrícolas, o trabalho teve por objetivo avaliar o desempenho do motor de um trator agrícola de 53kW acoplado pela TDP em bancada dinamométrica, operando com biodiesel metílico de óleo de frango e misturas com óleo diesel, sendo: B5 (testemunha), B20, B40, B60, B80 e B100. Avaliaram-se a potência, o torque, a reserva de torque, o consumo de combustível, o consumo de energia e a eficiência térmica do motor. O ensaio foi instalado com delineamento inteiramente casualizado (DIC) em esquema fatorial com seis tratamentos. Os resultados foram submetidos à análise de variância e as médias ajustadas por equações de regressão. Foram observadas perdas na geração de potência e torque, aumento no consumo de combustível, redução do consumo energético e melhoria na eficiência térmica do motor, de acordo com o aumento da proporção de biodiesel na mistura.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

O conhecimento do genoma pode auxiliar na identificação de regiões cromossômicas e, eventualmente, de genes que controlam características quantitativas (QTLs) de importância econômica. em um experimento com 1.129 suínos resultantes do cruzamento entre machos da raça Meishan e fêmeas Large White e Landrace, foram analisadas as características gordura intramuscular (GIM), em %, e ganho dos 25 aos 90 kg de peso vivo (GP), em g/dia, em 298 animais F1 e 831 F2, e espessura de toucinho (ET), em mm, em 324 F1 e 805 F2. Os animais das gerações F1 e F2 foram tipificados com 29 marcadores microsatélites. Estudou-se a ligação entre os cromossomos 4, 6 e 7 com GIM, ET e GP. Análises de QTL utilizando-se metodologia Bayesiana foram aplicadas mediante três modelos genéticos: modelo poligênico infinitesimal (MPI); modelo poligênico finito (MPF), considerando-se três locos; e MPF combinado com MPI. O número de QTLs, suas respectivas posições nos três cromossomos e o efeito fenotípico foram estimados simultaneamente. Os sumários dos parâmetros estimados foram baseados nas distribuições marginais a posteriori, obtidas por meio do uso da Cadeia de Markov, algoritmos de Monte Carlo (MCMC). Foi possível evidenciar dois QTLs relacionados a GIM nos cromossomos 4 e 6 e dois a ET nos cromossomos 4 e 7. Somente quando se ajustou o MPI, foram observados QTLs no cromossomo 4 para ET e GIM. Não foi possível detectar QTLs para a característica GP com a aplicação dessa metodologia, o que pode ter resultado do uso de marcadores não informativos ou da ausência de QTLs segregando nos cromossomos 4, 6 e 7 desta população. Foi evidenciada a vantagem de se analisar dados experimentais ajustando diferentes modelos genéticos; essas análises ilustram a utilidade e ampla aplicabilidade do método Bayesiano.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The present research had aimed at studying the auxins and or boron effect on rooting of coffee (Coffea arabica L. cv. Mundo Novo') cuttings. The cuttings were obtained from semi-hardwood orthotropous branches of coffee-tree, containing 2 nodes and with aproximately 10 cm in length. The bases were dipped in treatment solutions composed of IBA or NAA with and without boron during 24 hours. After the treatments, the cuttings were planted in vermiculite. The following could be observed on cuttings taken ninety days after planting - total number of roots formed, average number of roots per cutting and root length. From the results obtained, it can be concluded that cutting treatment with NAA 100 ppm plus boron is responsible for the better rooting of coffee cuttings.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The objectives of this work were to determine the micelial growth curve of the pathogen and the sensitivity to some fungicides potencially efficient to disease control. The optimum temperature range for micelial growth of Phyllosticta sp, was between 25 and 27.5 degrees C. The maximum and minimum temperatures for micelial growth were 32.5 degrees C and 10 degrees C. Temperatures of 5 and 35 degrees C completely inhibited the growth of the isolates. Total inhibition of the micelial growth was observed with captan and mancozeb (1000 mg a.i./ml) and triadimenol (100 mg a.i./ml). Partial reduction of the micelial growth was observed with iprodione, methyl tiofanate and chlorothalonil until 1.000 mg/ml. The chemical control of PLS was studied in a commercial area of ginger ''Gigante'', in Morretes, PR, where 18 sprays were carried out, with a break of 7 to 10 days, from December to April. The highest reduction of the area under the disease progress curve standardized (AUDPCs) was observed with the spray of chlorothalonil. With the application of dithianon, cupper oxychloride, folpet, mancozeb and captan it was observed AUDPCs between 15.05 and 18.61 lesions/leaf. Iprodione, benomyl, triadimenol and methyl tiofanate did not control the disease (AUDPCs between 20.03 and 25.04 lesions/leaf). The AUDPCs in the check plot was 35.88 lesions/leaf. There was no significant difference of vigor and of ginger yield between fungicide treatments. The cupper oxichloride was phytotoxic to ginger.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This job aim has been to study the aqueous corrosion of the 7xxx heattreatable aluminium alloys, used in the aeronautical industry. The 7010, 7050 and 7475 alloys, have been supplied in the T7 condition and submitted to the annealed and aging thermal treatments of in order to study their behaviours front to corrosion in 5% NaCl pH 6,0, air-saturated and deaerated solutions. The electrochemical study has been accomplished through potential measures in open circuit, potentiodynamic polarisation curves and electrochemical impedance spectroscopy (EIS). The aged alloy resulted to be the most resistant to corrosion and annealed the less resistant ones. In spite of it they have different chemical compositions, in each mean, the alloy with the same thermal treatment has behaved in a similar way. In aerated solution, the process is controlled by oxygen diffusion and in oxygen absence for dissolution through a film. Hardness and mass loss measures, after corrosion test, have supported this research.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The number of studies of genotoxic activity of medicinal plants has been growing alongside with their increasing therapeutic use and scientific interest in proving their effectiveness for a variety of pharmacological purposes. This reflects the fact that many of the plants used by great numbers of people, in spite of their proven pharmacological value, can also cause harmful changes in the DNA. The risks are greater when alternative treatments are applied in an uncontrolled way, without due attention to correct botanical identification, to the part of the plant that should to be used and to the method of preparation and administration. In this review, aspects of the mutagenic activity of some medicinal plants are discussed.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The animal experimentation in the scientific research has contributed excessively for the development of science and technology, promoting to long of the years the discovery of prophylactic measures and treatments for diseases that attack the humans. Animals of some species have been used in the last times, being the mouse the more intensely used and more deeply known scientifically. The objective of this work was to carry through a bibliographical survey including data of our research group, about the use of mice in the animal experimentation, approaching its general biology, reproduction physiology, creation systems, genetics, habitation, feeding, handling, pain and euthanasia, techniques of risk developed in the experimentation, blood collection, pharmacological and toxicological experiments. Although current trends praise the use of alternative methods (in vitro studies, cells cultures, etc.), the animal models, as the mouse, present as main advantage the supply of information on the organism as a whole, fact that is not obtained with other methods, what still it makes possible its utilization in scientific research.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Zoology laboratories at institutions of research and education have shown great demand for anatomical parts for practical lessons. However, although the bibliography is not necessarily scarce, analyses of the cost/benefit relations of such processes are rare, considering aspects such as preparation time, quality of the anatomical parts, and material and human resources. In addition to the common techniques already used, new low-cost products, not cited in literature and easily found in the market, were also tested. The main objective of this work was to elaborate and organize information on techniques of bone parts maceration for study collections, making comparative analyses on the cost/benefit relations of each technique. Twelve products were tested, evaluating experimental conditions such as: concentration and combination of reagents, temperature, pH and time of exposure of the parts to the reagents. The results indicated that the products recommended for the use in the maceration processes were: water, hydrogen peroxide and papaya juice (Carica papaya).

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Pain is a subjective condition and, thus, difficult to measure. The best tools to assess pain are the pain evaluation questionnaires, which provide either diagnostic, pain evolution or pain intensity information. To provide information which could help differentiate between nociceptive pain and neuropathic pain is one of the most important functions of these questionnaires. The questionnaires can measure pain intensity, quality of life, or sleep quality. Quality of life and sleep are two really important characteristics to assess the pain impact on patients' life. Pain intensity assessing questionnaires combine physical evaluations with questions, providing information either from the patient sensations or clinical assessment of pain manifestations as well as the underlying biological mechanisms (such as hyperalgesia or allodynia). For example, the Pain Detect questionnaire has two parts: the patient form (intuitive, with pictures and easy understandable) and the physician form. Thus, in this questionnaire, subjective information is provided by the patient and the objective one is provided by the physician. Other pain intensity questionnaires are NPSI, DN4, LANSS or StEP. Quality of life questionnaires are versatile (can be used in different pathologies). These questionnaires include functional self-evaluation questions, and other ones associated to physical and mental health. Two of such quality of life questionnaires are SF-36 and NHP. Sleep evaluation questionnaires include quantitative features such as the number of sleep interruptions, sleep latency or sleep duration as well as qualitative characteristics such as rest sensation, mood and dreams. One of the most used sleep evaluation questionnaires is PSQI, which includes patient questions and bed-partner questions, providing information from two points of view. Copyright 2009 Prous Science, S.A.U. or its licensors. All rights reserved.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Incluye Bibliografía