EBSD analysis of a Ti-IF steel subjected to hot torsion in the ferritic region

The effect of grain size on the warm deformation behaviour of a titanium stabilized interstitial free steel was investigated using hot torsion. Tests were performed at temperatures between 765 °C and 850 °C at strain rates between 0.003 s−1 and 1 s−1 for samples with grain sizes of 25 μm, 75 μm and 150 μm. The structures were observed using EBSD analysis and are consistent with those expected for materials dominated by dynamic recovery. Some evidence was found for small amounts of thermally induced migration of pre-existing boundary (bulging) and for the generation of new segments of high angle boundaries by continuous dynamic recrystallization. The early onset of a steady-state flow stress in the finer grained samples is attributed to one or a combination of thermally induced boundary migration and enhanced rates of recovery near subgrain (and grain) boundaries.

A descriptive model for the formation of ultrafine grained steels

This paper presents a descriptive model to explain the mechanisms involved in the development of ultrafine grained structure in steels through dynamic strain induced transformation. The model considers the microstructural evolution during and after deformation as well as the role of different process variables. A key factor is the competition between nucleation and growth, where it is shown that many potential nuclei can be lost under certain conditions leading to a mixed or coarser grain size.

Effect of carbohydrate ingestion on exercise-induced alterations in metabolic gene expression

Skeletal muscle possesses a high degree of plasticity and can adapt to both the physical and metabolic challenges that it faces. An acute bout of exercise is sufficient to induce the expression of a variety of metabolic genes, such as GLUT4, pyruvate dehydrogenase kinase 4 (PDK-4), uncoupling protein-3 (UCP3), and peroxisome proliferator-activated receptor-? coactivator 1 (PGC-1). Reducing muscle glycogen levels before exercise potentiates the effect of exercise on many genes. Similarly, altered substrate availability induces transcription of many of these genes. The purpose of this study was to determine whether glucose ingestion attenuates the exercise-induced increase in a variety of exercise-responsive genes. Six male subjects (28 ± 7 yr; 83 ± 3 kg; peak pulmonary oxygen uptake = 46 ± 6 ml·kg–1·min–1) performed 60 min of cycling at 74 ± 2% of peak pulmonary oxygen uptake on two separate occasions. On one occasion, subjects ingested a 6% carbohydrate drink. On the other occasion, subjects ingested an equal volume of a sweet placebo. Muscle samples were obtained from vastus lateralis at rest, immediately after exercise, and 3 h after exercise. PDK-4, UCP3, PGC-1, and GLUT4 mRNA levels were measured on these samples using real-time RT-PCR. Glucose ingestion attenuated (P < 0.05) the exercise-induced increase in PDK-4 and UCP3 mRNA. A similar trend (P = 0.09) was observed for GLUT4 mRNA. In contrast, PGC-1 mRNA increased following exercise to the same extent in both conditions. These data suggest that glucose availability can modulate the effect of exercise on metabolic gene expression.

In-situ observations of Widmanstätten ferrite formation in a low carbon steel

An in situ laser-scanning confocal microscopy study has been undertaken into Widmanstätten ferrite formation in an Fe–C alloy, in combination with electron backscattered diffraction. It has been found for the first time that the sympathetic nucleation of Widmanstätten ferrite on grain boundary allotriomorphs can exhibit a step wise change in orientation and growth direction until the most favourable growth conditions are achieved.

Effect of transformation mechanism (static or dynamic) on final ferrite grain size

A simple series of test was developed to highlight and compare the difference between the static strain induced transformation (SSIT) and the dynamic strain induced transformation (DSIT) mechanism in grain refinement and also to investigate the origin of the difference between the two mechanisms. The results showed that while the SSIT sets up a two-dimensional impingement among the ferrite grains, it cannot avoid their coarsening (normal growth). However, the DSIT forms a group of grains with a three-dimensional impingement which does not coarsen and maintains their fine size throughout the transformation, thereby, reduces the final average grain size.

Variant selection during the c-to-ab phase transformation in hot-rolled bainitic TRIP-aided steels

The variant selection phenomenon during the austenite to bainite phase transformation in hot-rolled TRIP-aided steels was quantitatively characterized at the level of individual austenite grains. The reconstruction of the electron backscatter diffraction maps provided evidence that bainite grows by packets of laths sharing a common {1 1 1}_y plane in the austenite. The affect of hot deformation is to reduce the number of packets that form. It is suggested that slip activity is important in understanding this effect.

Transient response analysis of steel in concrete

A new approach is presented for the analysis of galvanostatically induced transients allowing for the rapid evaluation of the corrosion activity of steel in concrete. This method of analysis is based on the iterative fitting of a non-exponential model based on a modified KWW (Kohlrausch–Williams–Watt) formalism. This analysis yields values for the parameters related to corrosion such as the concrete resistance, polarisation resistance, interfacial capacitance and β, the non-ideality exponent.

Nanoparticle enhanced conductivity in organic ionic plastic crystals : space charge versus strain induced defect mechanism

High conductivity in solid-state electrolytes is a critical requirement for many advanced energy and other electrochemical applications. Plastic crystalline materials have shown promise in this regard, and the inclusion of nanosized inorganic particles in both amorphous and crystalline materials has indicated order of magnitude enhancements in ion transport induced by space charge or other defect enhancement. In this paper we present conductivity enhancements in the plastic crystal N,N‘-ethylmethylpyrrolidinium bis(trifluoromethanesulfonyl)amide ([C₂mpyr][NTf₂]) induced by nanosized SiO₂ particles. The addition of the nanoparticles dramatically increases plasticity and ion mobility. Positron annihilation lifetime spectroscopy (PALS) measurements indicate an increase in mean defect size and defect concentration as a result of nanoparticle inclusion. The scaling of the conductivity with size suggests that a “trivial space charge” effect is operable, although a strain induced enhancement of defects (in particular extended defects) is also likely given the observed increase in plasticity.

Numerical simulations on warm forming of stainless steel with trip-effect

In steels with TRIP-effect, a phase transformation from the retained-austenite to martensite occurs during forming, and it significantly affects hardening behaviours. Such an effect is sensitive to the amount of strain as well as the temperature variation. For materials with a strong TRIP-effect, new forming techniques are needed to develop that can lead to lighter and stronger components in automotive industry. This paper presents a coupled thermo-mechanical finite element modelling and simulation of a warm deep drawing of austenitic stainless steel (including a TRIP-effect) using LS-DYNA and temperature effect on forming process of such materials is investigated.

Comparison of mechanical behaviour of thin film simulated by discrete dislocation dynamics and continuum crystal plasticity

3D finite element simulations of 9-grain multicrystalline aggregates are performed within the framework of the classical continuum crystal plasticity and discrete dislocation dynamics. The results are processed in a statistical way by ensemble averaging. The comparison is made at three levels: macroscopic stress–strain curves, average stress values per grain, local values of stress and plastic strain. The comparison shows that some similarities are observed in the stress and strain distributions in both simulations approaches. But there are also large discrepancies caused by the discrete nature of plasticity in DDD. The DDD simulations provide higher stress levels in the aggregate due to the small number of dislocation sources and to the stress field induced by individual dislocations.

Continuous cooling transformation of deformed austenite in highly hole-expandable steels

The effects of Si and Mn contents on transformation temperature _r3, transformed microstructure and mechanical properties of three kinds of low-carbon steels during continuous cooling were investigated. A _r3 rises by 15-25°C when increasing Si content from 0.50% to 1.35%, and it drops by 30-50°C when increasing Mn content from 0.97% to 1.43%. The effect of Mn on A _r3 is more significant than Si. Si stimulates the precipitation of the high-temperature equiaxed ferrite to suppress the bainite transformation, but Mn not only provides the grain refining of transformed microstructure but also stimulates the forming of bainite. The homogeneous and grain refining diphase ferrite/bainite steel (w(Si)=0.56, w(Mn)=1.43) can be obtained after deformed at 850°C and cooled at the rate 30°C/s, of which the tensile strength is up to 654 MPa.