Good practice guide in learning and teaching

This is the second edition of our Aston Business School (ABS) Good Practice Guide and the enthusiasm of the contributors appears undiminished. I am again reminded that I work with a group of very committed, dedicated and professional colleagues. Once again this publication is produced to celebrate and promote good teaching across the School and to offer encouragement to those imaginative and innovative staff who continue to wish to challenge students to learn to maximum effect. It is hoped that others will pick up some good ideas from the articles contained in this volume. Contributors to this Guide were not chosen because they are the best teachers in the School, although they are undoubtedly all amongst my colleagues who are exponents of enthusiastic and inspiring approaches to learning. The Quality Unit approached these individuals because they declared on their Annual Module Reflection Forms that they were doing something interesting and worthwhile which they thought others might find useful. Amongst those reading the Guide I am sure that there are many other individuals who are trying to operate similar examples of good practice in their teaching, learning and assessment methods. I hope that this publication will provoke these people into providing comments and articles of their own and that these will form the basis of next year’s Guide. It may also provoke some people to try these methods in their own teaching. The themes of the articles this year can be divided into two groups. The first theme is the quest to help students to help themselves to learn via student-run tutorials, surprise tests and mock examinations linked with individual tutorials. The second theme is making learning come to life in exciting practical ways by, for example, hands-on workshops and simulations, story telling, rhetorical questioning and discussion groups. A common theme is one of enthusiasm, reflection and commitment on behalf of the lecturers concerned. None of the approaches discussed in this publication are low effort activities on the part of the facilitator, but this effort is regarded as worthwhile as a means of creating greater student engagement. As Biggs (2003)[1] says, in his similarly inspiring way, students learn more the less passive they are in their learning. (Ref). The articles in this publication bear witness of this and much more. Since last year Aston Business School has launched its Research Centre in Higher Education Learning and Management (HELM) which is another initiative to promote excellent learning and teaching. Even before this institution has become fully operational, at least one of the articles in this publication has seen the light of day in the research arena and at least two others are ripe for dissemination to a wider audience via journal publication. More news of our successes in this activity will appear in next year’s edition. May I thank the contributors for taking time out of their busy schedules to write the articles this summer, and to Julie Green who runs the ABS Quality Unit, for putting our diverse approaches into a coherent and publishable form and for chasing us when we have needed it! I would also like to thank Ann Morton and her colleagues in the Centre for Staff Development who have supported this publication. During the last year the Centre has further stimulated the learning and teaching life of the School (and the wider University) via their Learning and Teaching Week and sponsorship of Teaching Quality Enhancement Fund (TQEF) projects. Pedagogic excellence is in better health at Aston than ever before – long may this be because this is what life in HE should be about.

The future of manufacturing

Anyone who looks at the title of this special issue will agree that the intent behind the preparation of this volume was ambitious: to predict and discuss “The Future of Manufacturing”. Will manufacturing be important in the future? Even though some sceptics might say not, and put on the table some old familiar arguments, we would strongly disagree. To bring subsidies for the argument we issued the call-for-papers for this special issue of Journal of Manufacturing Technology Management, fully aware of the size of the challenge in our hands. But we strongly believed that the enterprise would be worthwhile. The point of departure is the ongoing debate concerning the meaning and content of manufacturing. The easily visualised internal activity of using tangible resources to make physical products in factories is no longer a viable way to characterise manufacturing. It is now a more loosely defined concept concerning the organisation and management of open, interdependent, systems for delivering goods and services, tangible and intangible, to diverse types of markets. Interestingly, Wickham Skinner is the most cited author in this special issue of JMTM. He provides the departure point of several articles because his vision and insights have guided and inspired researchers in production and operations management from the late 1960s until today. However, the picture that we draw after looking at the contributions in this special issue is intrinsically distinct, much more dynamic, and complex. Seven articles address the following research themes: 1.new patterns of organisation, where the boundaries of firms become blurred and the role of the firm in the production system as well as that of manufacturing within the firm become contingent; 2.new approaches to strategic decision-making in markets characterised by turbulence and weak signals at the customer interface; 3.new challenges in strategic and operational decisions due to changes in the profile of the workforce; 4.new global players, especially China, modifying the manufacturing landscape; and 5.new techniques, methods and tools that are being made feasible through progress in new technological domains. Of course, many other important dimensions could be studied, but these themes are representative of current changes and future challenges. Three articles look at the first theme: organisational evolution of production and operations in firms and networks. Karlsson's and Skold's article represent one further step in their efforts to characterise “the extraprise”. In the article, they advance the construction of a new framework, based on “the network perspective” by defining the formal elements which compose it and exploring the meaning of different types of relationships. The way in which “actors, resources and activities” are conceptualised extends the existing boundaries of analytical thinking in operations management and open new avenues for research, teaching and practice. The higher level of abstraction, an intrinsic feature of the framework, is associated to the increasing degree of complexity that characterises decisions related to strategy and implementation in the manufacturing and operations area, a feature that is expected to become more and more pervasive as time proceeds. Riis, Johansen, Englyst and Sorensen have also based their article on their previous work, which in this case is on “the interactive firm”. They advance new propositions on strategic roles of manufacturing and discuss why the configuration of strategic manufacturing roles, at the level of the network, will become a key issue and how the indirect strategic roles of manufacturing will become increasingly important. Additionally, by considering that value chains will become value webs, they predict that shifts in strategic manufacturing roles will look like a sequence of moves similar to a game of chess. Then, lastly under the first theme, Fleury and Fleury develop a conceptual framework for the study of production systems in general derived from field research in the telecommunications industry, here considered a prototype of the coming information society and knowledge economy. They propose a new typology of firms which, on certain dimensions, complements the propositions found in the other two articles. Their telecoms-based framework (TbF) comprises six types of companies characterised by distinct profiles of organisational competences, which interact according to specific patterns of relationships, thus creating distinct configurations of production networks. The second theme is addressed by Kyläheiko and SandstroÍm in their article “Strategic options based framework for management of dynamic capabilities in manufacturing firms”. They propose a new approach to strategic decision-making in markets characterised by turbulence and weak signals at the customer interface. Their framework for a manufacturing firm in the digital age leads to active asset selection (strategic investments in both tangible and intangible assets) and efficient orchestrating of the global value net in “thin” intangible asset markets. The framework consists of five steps based on Porter's five-forces model, the resources-based view, complemented by means of the concepts of strategic options and related flexibility issues. Thun, GroÍssler and Miczka's contribution to the third theme brings the human dimension to the debate regarding the future of manufacturing. Their article focuses on the challenges brought to management by the ageing of workers in Germany but, in the arguments that are raised, the future challenges associated to workers and work organisation in every production system become visible and relevant. An interesting point in the approach adopted by the authors is that not only the factual problems and solutions are taken into account but the perception of the managers is brought into the picture. China cannot be absent in the discussion of the future of manufacturing. Therefore, within the fourth theme, Vaidya, Bennett and Liu provide the evidence of the gradual improvement of Chinese companies in the medium and high-tech sectors, by using the revealed comparative advantage (RCA) analysis. The Chinese evolution is shown to be based on capabilities developed through combining international technology transfer and indigenous learning. The main implication for the Western companies is the need to take account of the accelerated rhythm of capability development in China. For other developing countries China's case provides lessons of great importance. Finally, under the fifth theme, Kuehnle's article: “Post mass production paradigm (PMPP) trajectories” provides a futuristic scenario of what is already around us and might become prevalent in the future. It takes a very intensive look at a whole set of dimensions that are affecting manufacturing now, and will influence manufacturing in the future, ranging from the application of ICT to the need for social transparency. In summary, this special issue of JMTM presents a brief, but undisputable, demonstration of the possible richness of manufacturing in the future. Indeed, we could even say that manufacturing has no future if we only stick to the past perspectives. Embracing the new is not easy. The new configurations of production systems, the distributed and complementary roles to be performed by distinct types of companies in diversified networked structures, leveraged by the new emergent technologies and associated the new challenges for managing people, are all themes that are carriers of the future. The Guest Editors of this special issue on the future of manufacturing are strongly convinced that their undertaking has been worthwhile.

Environmental scanning electron microscopy offers real-time morphological analysis of liposomes and niosomes

Liposomes have been imaged using a plethora of techniques. However, few of these methods offer the ability to study these systems in their natural hydrated state without the requirement of drying, staining, and fixation of the vesicles. However, the ability to image a liposome in its hydrated state is the ideal scenario for visualization of these dynamic lipid structures and environmental scanning electron microscopy (ESEM), with its ability to image wet systems without prior sample preparation, offers potential advantages to the above methods. In our studies, we have used ESEM to not only investigate the morphology of liposomes and niosomes but also to dynamically follow the changes in structure of lipid films and liposome suspensions as water condenses on to or evaporates from the sample. In particular, changes in liposome morphology were studied using ESEM in real time to investigate the resistance of liposomes to coalescence during dehydration thereby providing an alternative assay of liposome formulation and stability. Based on this protocol, we have also studied niosome-based systems and cationic liposome/DNA complexes. Copyright © Informa Healthcare.

Total quality management in English language teaching:a case study in Turkish higher education

The need to improve the management of language learning organizations in the light of the trend toward mass higher education and of the use of English as a world language was the starting point of this thesis. The thesis aims to assess the relevance, adequacy and the relative success of Total Quality Management (TQM) as a management philosophy. Taking this empirical evidence a TQM-oriented management project in a Turkish Higher Education context, the thesis observes the consequences of a change of organizational culture, with specific reference to teachers' attitudes towards management. Both qualitative and quantitative devices are employed to plot change and the value of these devices for identifying such is considered. The main focus of the thesis is the Soft S's (Shared Values, Style, Staff and Skills) of an organization rather than the Hard S's (System, Structure, Strategy). The thesis is not concerned with the teaching and learning processes, though the PDCA cycle (the Action Research Cycle) did play a part in the project for both teachers and the researcher involved in this study of organizational development. Both before the management project was launched, and at the end of the research period, the external measurement devices (Harrison's Culture Specification Device and Hofstede's VSM) were used to describe the culture of the Centre. During the management project, internal measurement devices were used to record the change including middle-management style change (the researcher in this case). The time period chosen for this study was between September 1991 and June 1994. During this period, each device was administered twice within a specific time period, ranging from a year to 32 months.

Preparation, optimisation and characterisation of lyophilised rapid disintegrating tablets based on gelatin and saccharide

Despite recent success, rapidly disintegrating lyophilized tablets still face problems of low mechanical strength and higher disintegration times resulting in poor patient compliance. The aim of the current work was to carry out a systematic study to understand the factors controlling mechanical properties of these formulations. The work investigated the influence of two bloom strengths of gelatin: low (60 bloom) and high (225 bloom) at different stock solution concentrations (2, 5, 7.5, and 10 %w/w). This was followed by investigation of addition of five saccharides (xylitol, glucose, trehalose, maltotriose and mannitol) at varied concentration range (10-80 %w/w) to decipher their influence on disintegration time, mechanical and thermal properties of the formulation. The results indicated that the disintegration time of the tablets dramatically decreased by decreasing the concentration and bloom strength of gelatin in the stock solution. However the mechanical properties of the tablets were mainly influenced by the concentration of gelatin rather than the bloom strength. The addition of saccharides resulted in enhancement of tablet properties and was concentration dependent. All the saccharides improved the fractubility of the tablets significantly at high concentration (equal or higher than 40% w/w). However, only high concentration (equal or higher than 40% w/w) of trehalose, maltotriose and mannitol significantly enhanced the hardness. Additionally, mannitol crytallised during freeze drying and consequently produced elegant tablets, whilst the other saccarides exhibited lyoprotectant activity as they were able to retain amorphous status. Based on the above findings, an optimized formulation was also successfully developed and characterized to deliver 100 microg dose of Clonidine HCl.

Being there:a qualitative interview study with fathers present during the resuscitation of their baby at delivery

Objective: To explore fathers' experiences of the resuscitation of their baby at delivery. Design: A descriptive, retrospective design using tape-recorded semistructured interviews with fathers present during the resuscitation of their baby at delivery. Fathers described what happened, their interactions with healthcare professionals, their feelings at the time and afterwards. Setting: Participants were recruited from a large teaching hospital in the UK. Participants: A purposive sample of 20 fathers whose baby required resuscitation at delivery. Results: Participant responses were analysed using thematic analysis. Four broad themes were identified: 'preparation', 'knowing what happened', 'his response' and 'impact on him'. Fathers had no difficulty recalling their emotions during the resuscitation. These feelings remained vivid and were mostly negative. Most fathers wanted to go to their baby during the resuscitation but did not do so. They felt they should stay with their partner, did not want to impede the resuscitation or felt they were not 'allowed' to go to their baby. The fathers' position in the room and the extent to which they were focusing on their partner had an impact on their recollection of what happened. Fathers had no opportunity to discuss the resuscitation with healthcare professionals afterwards. Several fathers felt they had not yet recovered from the experience and a few had symptoms synonymous with post-traumatic stress disorder. Conclusion: This is the first study to specifically explore fathers' experiences of newborn resuscitation. The findings should inform healthcare education, policy development and the provision of support to fathers.

Adjusting to job relocation:relocation preparation can reduce relocation stress

This study, for the first time, examines the relationship between pre-move relocation preparation with psychological well-being to job relocation. Psychological reactions of 54 relocators were measured before and after their move. The greater the reported pre-move relocation preparation the better was the relocators' post-move mental health and job-related contentment and enthusiasm. Furthermore, pre-move relocation preparation was associated with reduced problems during the move and this, in turn, resulted in better post-move adjustment.

Preparation and characterization of gas-filled liposomes:Can they improve oil recovery?

Although well known for delivering various pharmaceutical agents, liposomes can be prepared to entrap gas rather than aqueous media and have the potential to be used as pressure probes in magnetic resonance imaging (MRI). Using these gas-filled liposomes (GFL) as tracers, MRI imaging of pressure regions of a fluid flowing through a porous medium could be established. This knowledge can be exploited to enhance recovery of oil from the porous rock regions within oil fields. In the preliminary studies, we have optimized the lipid composition of GFL prepared using a simple homogenization technique and investigated key physico-chemical characteristics (size and the physical stability) and their efficacy as pressure probes. In contrast to the liposomes possessing an aqueous core which are prepared at temperatures above their phase transition temperature (Tc), homogenization of the phospholipids such as 1,2-dipalmitoyl-sn-glycero-3- phosphocholine (DPPC) or 1,2-distearoyl-sn-glycero-3-phosphocoline (DSPC) in aqueous medium below their Tc was found to be crucial in formation of stable GFL. DSPC based preparations yielded a GFL volume of more than five times compared to their DPPC counter part. Although the initial vesicle sizes of both DSPC and DPPC based GFL were about 10 μm, after 7 days storage at 25°C, the vesicle sizes of both formulations significantly (p < 0.05) increased to 28.3 ± 0.3 μm and 12.3 ± 1.0 μm, respectively. When the DPPC preparation was supplemented with cholesterol at a 1:0.5 or 1:1 molar ratio, significantly (p < 0.05) larger vesicles were formed (12-13 μm), however, compared to DPPC only vesicles, both cholesterol supplemented formulations displayed enhanced stability on storage indicating a stabilizing effect of cholesterol on these gas-filled vesicles. In order to induce surface charge on the GFL, DPPC and cholesterol (1: 0.5 molar ratio) liposomes were supplemented with a cationic surfactant, stearylamine, at a molar ratio of 0.25 or 0.125. Interestingly, the ζ potential values remained around neutrality at both stearylamine ratios suggesting the cationic surfactant was not incorporated within the bilayers of the GFL. Microscopic analysis of GFL confirmed the presence of spherical structures with a size distribution between 1-8 μm. This study has identified that DSPC based GFL in aqueous medium dispersed in 2% w/v methyl cellulose although yielded higher vesicle sizes over time were most stable under high pressures exerted in MRI. Copyright © Informa Healthcare USA, Inc.

Mathematical Packages for Teaching and Research in Internet – Application and Information Support

The paper considers the use and the information support of the most important mathematical Application Packages (AP), such as Maple, Matlab, Mathcad, Mathematica, Statistica and SPSS – mostly used during Calculus tuition in Universities. The main features of the packages and the information support in the sites of the producers are outlined, as well as their capacity for work in Internet, together with educational sites and literature related to them. The most important resources of the TeX system for preparation of mathematical articles and documents are presented.

Development of Variational Thinking Skills in Programming Teaching

The paper presents an example of methodological approach to the development of variational thinking skills in teaching programming. Various ways in solving a given task are implemented for the purpose. One of the forms, through which the variational thinking is manifested, is related to trail practical actions. In the process of comprehension of the properties thus acquired, students are doing their own (correct or incorrect) conclusions for other, hidden properties and at the same time they discover possibilities for new ways of action and acquiring of new effects. The variability and the generalizing function of thinking are in a close interrelation, and their interaction to a great extend determines the dynamics of the cognitive activity of the student.

Preparation and characterisation of novel polycaprolactone-chitosan blends

This research paper reports on the production of a biocompatible and biodegradable material to be used in a polymer stent used for counteracting the occurrence of anastomotic leakage following gastrointestinal surgery. Chitosan was blended with polycaprolactone in a solvent mixture of acetic acid and water. Membranes were formed with a range of 50/50%, 60/40%, 65/35%, 70/30% and 80/20% polycaprolactone/chitosan. The tensile properties of the blends were examined over a time period to access material degradation. In addition the biocompatibilities of the polycaprolactone/chitosan blends were tested for cytotoxic effect using primary tendon fibroblastic cells. This research concluded that the polycaprolactone/chitosan was non-toxic to the fibroblasts cells in-vitro. Analysis of the mechanical properties of the blends showed a range of mechanical strengths and polymer life spans. Overall, blends of 65/35%, 70/30% and 80/20% polycaprolactone/chitosan emerged as possible candidates for the production of a gastrointestinal stent. © 2011 Inderscience Enterprises Ltd.

Engineering education research - the UK perspective at a time of change

Engineering education in the United Kingdom is at the point of embarking upon an interesting journey into uncharted waters. At no point in the past have there been so many drivers for change and so many opportunities for the development of engineering pedagogy. This paper will look at how Engineering Education Research (EER) has developed within the UK and what differentiates it from the many small scale practitioner interventions, perhaps without a clear research question or with little evaluation, which are presented at numerous staff development sessions, workshops and conferences. From this position some examples of current projects will be described, outcomes of funding opportunities will be summarised and the benefits of collaboration with other disciplines illustrated. In this study, I will account for how the design of task structure according to variation theory, as well as the probe-ware technology, make the laws of force and motion visible and learnable and, especially, in the lab studied make Newton's third law visible and learnable. I will also, as a comparison, include data from a mechanics lab that use the same probe-ware technology and deal with the same topics in mechanics, but uses a differently designed task structure. I will argue that the lower achievements on the FMCE-test in this latter case can be attributed to these differences in task structure in the lab instructions. According to my analysis, the necessary pattern of variation is not included in the design. I will also present a microanalysis of 15 hours collected from engineering students' activities in a lab about impulse and collisions based on video recordings of student's activities in a lab about impulse and collisions. The important object of learning in this lab is the development of an understanding of Newton's third law. The approach analysing students interaction using video data is inspired by ethnomethodology and conversation analysis, i.e. I will focus on students practical, contingent and embodied inquiry in the setting of the lab. I argue that my result corroborates variation theory and show this theory can be used as a 'tool' for designing labs as well as for analysing labs and lab instructions. Thus my results have implications outside the domain of this study and have implications for understanding critical features for student learning in labs. Engineering higher education is well used to change. As technology develops the abilities expected by employers of graduates expand, yet our understanding of how to make informed decisions about learning and teaching strategies does not without a conscious effort to do so. With the numerous demands of academic life, we often fail to acknowledge our incomplete understanding of how our students learn within our discipline. The journey facing engineering education in the UK is being driven by two classes of driver. Firstly there are those which we have been working to expand our understanding of, such as retention and employability, and secondly the new challenges such as substantial changes to funding systems allied with an increase in student expectations. Only through continued research can priorities be identified, addressed and a coherent and strong voice for informed change be heard within the wider engineering education community. This new position makes it even more important that through EER we acquire the knowledge and understanding needed to make informed decisions regarding approaches to teaching, curriculum design and measures to promote effective student learning. This then raises the question 'how does EER function within a diverse academic community?' Within an existing community of academics interested in taking meaningful steps towards understanding the ongoing challenges of engineering education a Special Interest Group (SIG) has formed in the UK. The formation of this group has itself been part of the rapidly changing environment through its facilitation by the Higher Education Academy's Engineering Subject Centre, an entity which through the Academy's current restructuring will no longer exist as a discrete Centre dedicated to supporting engineering academics. The aims of this group, the activities it is currently undertaking and how it expects to network and collaborate with the global EER community will be reported in this paper. This will include explanation of how the group has identified barriers to the progress of EER and how it is seeking, through a series of activities, to facilitate recognition and growth of EER both within the UK and with our valued international colleagues.

Assessing the effectiveness of five-year mechanical engineering technology programs of junior colleges in Taiwan, R.O.C.: An application of the CIPP evaluation model

The purpose of this study was to evaluate the mechanical engineering technology curriculum effectiveness at the junior college in Taiwan by using the CIPP evaluation model. The study concerned the areas of the curriculum, curriculum materials, individualized instruction, support services, teaching effectiveness, student achievement, and job performance. A descriptive survey method was used with questionnaires for data collection from faculty, students, graduates, and employers.^ All categories of respondents tended to agree that the curriculum provides appropriate occupational knowledge and skills. Students, graduates, and faculty tended to be satisfied with the curriculum; faculty tended to be satisfied with student achievement; graduates tended to be satisfied with their job preparation; and employers were most satisfied with graduates' job performance.^ Conclusions were drawn in the context, input, process, and product of the CIPP model. In Context area: Students were dissatisfied with curriculum flexibility in students characteristics. Graduates were dissatisfied with curriculum design for student's adaptability in new economic and industrial conditions; practicum flexibility in student characteristics; and course overlap. Both students and graduates were dissatisfied with practicum credit hours. Both faculty and students were dissatisfied with the number of required courses.^ In Input area: Students, faculty, and graduates perceived audiovisuals and manipulative aids positively. Faculty and students perceive CAI implementation positively. Students perceived textbooks negatively.^ In Process area: Faculty, students, and graduates perceived all support service negatively. Faculty tended to perceive the ratios of graduates who enter advanced study and related occupation, and who passed the professional skills certification, negatively. Students tended to perceive teaching effectiveness in terms of instructional strategies, the quality of instruction, overall suitability, and receivable, negatively. Graduates also tended to identify the instructional strategies as a negative perception. Faculty and students perceived curriculum objectives and practicum negatively. Both faculty and students felt that instructors should be more interested in making the courses a useful learning experience.^ In Product area: Employers were satisfied with graduates' academic preparation and job performance, adaptability, punctuality, and their ability to communicate, cooperate, and meet organization needs. Graduates were weak in terms of equipment familiarity and supervisory ability.^ In sum, the curriculum of the five-year mechanical engineering technology programs of junior college in Taiwan has served adequately up to this time in preparing a work force to enter industry. It is now time to look toward the future and adapt the curriculum and instruction for the future needs of this high-tech society. ^

An analysis of the on-time graduation rate in the two-year program at National Taipei Institute of Technology in Taiwan

Taiwan's technical vocational educational system includes three levels: (1) institutes of technology (two and four year programs), (2) junior colleges (two, three and five year programs), and (3) senior vocational schools. Two-year junior colleges enroll their students through two channels: (1) based on results of the Particular Screening Entrance Examination (PSEE), (2) based on the Joint College Entrance Examination (JCEE). The PSEE has two categories: Category I includes on-time graduates with excellent performance, which means that they are within the top ten of their classes; Category II students include award-winning students in talent contests who have achieved a minimum grade point average of 75%. The JCEE is a regular entrance examination given to any senior vocation school graduate.^ Basic courses have a great impact on the students' academic performance. The purpose of the study was to focus on the effectiveness of teaching mathematics in two-year junior colleges and to analyze and correlate the results of two-year junior college students' performance in calculus and on-time graduation. The target group consisted of 521 students enrolled at National Taipei Institute of Technology in 1993.^ Calculus is a very important course for engineering majors in two-year junior colleges and has a great impact on the students' academic performance. This retrospective study showed that there was a correlation between students' performance in calculus and on-time graduation after two years of study.^ The conclusions of the study urge the Ministry of Education to reform two-year junior college curriculum standards to emphasize basic rudimentary courses. It is recommended that engineering majors receive three hours of calculus per week as the current requirement of only two hours per week is inadequate. The future job market will require a technologically advanced labor force that can be trained in a higher education system. More channels of higher education for two-year junior college graduates should be made available for those wishing to pursue bachelor degrees. Additional work in calculus will not only enhance the opportunities for two-year junior college graduates to continue their pursuit of an advanced academic degree, but also serve them well as they seek career advancement. ^

Effects of structured writing versus nonstructured writing as an effective and efficient teaching and learning strategy

This research investigated the effectiveness and efficiency of structured writing as compared to traditional nonstructured writing as a teaching and learning strategy in a training session for teachers.^ Structured writing is a method of identifying, interrelating, sequencing, and graphically displaying information on fields of a page or computer. It is an alternative for improving training and educational outcomes by providing an effective and efficient documentation methodology.^ The problem focuses upon the contradiction between: (a) the supportive research and theory to modify traditional methods of written documents and information presentation and (b) the existing paradigm to continue with traditional communication methods.^ A MANOVA was used to determine significant difference between a control and an experimental group in a posttest only experimental design. The experimental group received the treatment of structured writing materials during a training session. Two variables were analyzed. They were: (a) effectiveness; correct items on a posttest, and (b) efficiency; time spent on test.^ The quantitative data showed a difference for the experimental group on the two dependent variables. The experimental group completed the posttest in 2 minutes less time while scoring 1.5 more items correct. An interview with the training facilitators revealed that the structured writing materials were "user friendly." ^