Ethnobotany of natural fibres - Bactris setosa (tucum) in a traditional rural community

This work aimed to study the characteristics of the fibres of the species Bactris setosa ('tucum') used by close-knit social groups, located in Sorocaba - Sao Paulo - Brazil, in basket-making techniques, for possible applications in textile activity. Optical microscopy (NBR 13 538:1995) and Tensile Properties (ASTM D 3 822-2001) were used to assess properties such as the fibre structre, linear density, breaking force, elongation at break and breaking tenacity of each species. Bactris setosa showed a longitudinal view similar to that of sisal; an average linear density of 41.2 tex, a tenacity average of 11.96 cN/tex, closer to fiberglass, and an elongation ranging between 1.35 and 3.87%. It is important to clarify the delicacy and detail of the tests, and from this we highlight the importance of carrying out these studies, based on which science and technology must be linked with socio-environmental aspects.

Adding value to the Brazilian sisal: acid hydrolysis of its pulp seeking production of sugars and materials

The present work is inserted into the broad context of the upgrading of lignocellulosic fibers. Sisal was chosen in the present study because more than 50% of the world's sisal is cultivated in Brazil, it has a short life cycle and its fiber has a high cellulose content. Specifically, in the present study, the subject addressed was the hydrolysis of the sisal pulp, using sulfuric acid as the catalyst. To assess the influence of parameters such as the concentration of the sulfuric acid and the temperature during this process, the pulp was hydrolyzed with various concentrations of sulfuric acid (30-50%) at 70 A degrees C and with 30% acid (v/v) at various temperatures (60-100 A degrees C). During hydrolysis, aliquots were withdrawn from the reaction media, and the solid (non-hydrolyzed pulp) was separated from the liquid (liquor) by filtering each aliquot. The sugar composition of the liquor was analyzed by HPLC, and the non-hydrolyzed pulps were characterized by viscometry (average molar mass), and X-ray diffraction (crystallinity). The results support the following conclusions: acid hydrolysis using 30% H2SO4 at 100 A degrees C can produce sisal microcrystalline cellulose and the conditions that led to the largest glucose yield and lowest decomposition rate were 50% H2SO4 at 70 A degrees C. In summary, the study of sisal pulp hydrolysis using concentrated acid showed that certain conditions are suitable for high recovery of xylose and good yield of glucose. Moreover, the unreacted cellulose can be targeted for different applications in bio-based materials. A kinetic study based on the glucose yield was performed for all reaction conditions using the kinetic model proposed by Saeman. The results showed that the model adjusted to all 30-35% H2SO4 reactions but not to greater concentrations of sulfuric acid. The present study is part of an ongoing research program, and the results reported here will be used as a comparison against the results obtained when using treated sisal pulp as the starting material.

Application of succinylated sugarcane bagasse as adsorbent to remove methylene blue and gentian violet from aqueous solutions - Kinetic and equilibrium studies

In a previous work, succinylated sugarcane bagasse (SCB 2) was prepared from sugarcane bagasse (B) using succinic anhydride as modifying agent. In this work the adsorption of cationic dyes onto SCB 2 from aqueous solutions was investigated. Methylene blue, MB, and gentian violet, GV, were selected as adsorbates. The capacity of SCB 2 to adsorb MB and GV from aqueous single dye solutions was evaluated at different contact times, pH, and initial adsorbent concentration. According to the obtained results, the adsorption processes could be described by the pseudo-second-order kinetic model. Adsorption isotherms were well fitted by Langmuir model. Maximum adsorption capacities for MB and GV onto SCB 2 were found to be 478.5 and 1273.2 mg/g, respectively. (C) 2011 Elsevier Ltd. All rights reserved.

Production of banana fiber yarns for technical textile reinforced composites

[EN]Natural fibers have been used as an alternative to synthetic ones for their greener character; banana fibers have the advantage of coming from an agricultural residue. Fibers have been extracted by mechanical means from banana tree pseudostems, as a strategy to valorize banana crops residues. To increase the mechanical properties of the composite, technical textiles can be used as reinforcement, instead of short fibers. To do so, fibers must be spun and woven. The aim of this paper is to show the viability of using banana fibers to obtain a yarn suitable to be woven, after an enzymatic treatment, which is more environmentally friendly.

New polymeric materials for vascular surgery

The dramatic impact that vascular diseases have on human life quality and expectancy nowadays is the reason why both medical and scientific communities put great effort in discovering new and effective ways to fight vascular pathologies. Among the many different treatments, endovascular surgery is a minimally-invasive technique that makes use of X-ray fluoroscopy to obtain real-time images of the patient during interventions. In this context radiopaque biomaterials, i.e. materials able to absorb X-ray radiation, play a fundamental role as they are employed both to enhance visibility of devices during interventions and to protect medical staff and patients from X-ray radiations. Organic-inorganic hybrids are materials that combine characteristics of organic polymers with those of inorganic metal oxides. These materials can be synthesized via the sol-gel process and can be easily applied as thin coatings on different kinds of substrates. Good radiopacity of organic-inorganic hybrids has been recently reported suggesting that these materials might find applications in medical fields where X-ray absorption and visibility is required. The present PhD thesis aimed at developing and characterizing new radiopaque organic-inorganic hybrid materials that can find application in the vascular surgery field as coatings for the improvement of medical devices traceability as well as for the production of X-ray shielding objects and garments. Novel organic-inorganic hybrids based on different polyesters (poly-lactic acid and poly-ε-caprolactone) and polycarbonate (poly-trimethylene carbonate) as the polymeric phase and on titanium oxide as the inorganic phase were synthesized. Study of the phase interactions in these materials allowed to demonstrate that Class II hybrids (where covalent bonds exists between the two phases) can be obtained starting from any kind of polyester or polycarbonate, without the need of polymer pre-functionalization, thanks to the occurrence of transesterification reactions operated by inorganic molecules on ester and carbonate moieties. Polyester based hybrids were successfully coated via dip coating on different kinds of textiles. Coated textiles showed improved radiopacity with respect to the plain fabric while remaining soft to the touch. The hybrid was able to coat single fibers of the yarn rather than coating the yarn as a whole. Openings between yarns were maintained and therefore fabric breathability was preserved. Such coatings are promising for the production of light-weight garments for X-ray protection of medical staff during interventional fluoroscopy, which will help preventing pathologies that stem from chronic X-ray exposure. A means to increase the protection capacity of hybrid-coated fabrics was also investigated and implemented in this thesis. By synthesizing the hybrid in the presence of a suspension of radiopaque tantalum nanoparticles, PDMS-titania hybrid materials with tunable radiopacity were developed and were successfully applied as coatings. A solution for enhancing medical device radiopacity was also successfully investigated. High metal radiopacity was associated with good mechanical and protective properties of organic-inorganic hybrids in the form of a double-layer coating. Tantalum was employed as the constituent of the first layer deposited on sample substrates by means of a sputtering technique. The second layer was composed of a hybrid whose constituents are well-known biocompatible organic and inorganic components, such as the two polymers PCL and PDMS, and titanium oxide, respectively. The metallic layer conferred to the substrate good X-ray visibility. A correlation between radiopacity and coating thickness derived during this study allows to tailor radiopacity simply by controlling the metal layer sputtering deposition time. The applied metal deposition technique also permits easy shaping of the radiopaque layer, allowing production of radiopaque markers for medical devices that can be unambiguously identified by surgeons during implantation and in subsequent radiological investigations. Synthesized PCL-titania and PDMS-titania hybrids strongly adhered to substrates and show good biocompatibility as highlighted by cytotoxicity tests. The PDMS-titania hybrid coating was also characterized by high flexibility that allows it to stand large substrate deformations without detaching nor cracking, thus being suitable for application on flexible medical devices.

Industrial ecology applied to ELV management. Material and energy recovery from ASR

This PhD thesis reports on car fluff management, recycling and recovery. Car fluff is the residual waste produced by car recycling operations, particularly from hulk shredding. Car fluff is known also as Automotive Shredder Residue (ASR) and it is made of plastics, rubbers, textiles, metals and other materials, and it is very heterogeneous both in its composition and in its particle size. In fact, fines may amount to about 50%, making difficult to sort out recyclable materials or exploit ASR heat value by energy recovery. This 3 years long study started with the definition of the Italian End-of-Life Vehicles (ELVs) recycling state of the art. A national recycling trial revealed Italian recycling rate to be around 81% in 2008, while European Community recycling target are set to 85% by 2015. Consequently, according to Industrial Ecology framework, a life cycle assessment (LCA) has been conducted revealing that sorting and recycling polymers and metals contained in car fluff, followed by recovering residual energy, is the route which has the best environmental perspective. This results led the second year investigation that involved pyrolysis trials on pretreated ASR fractions aimed at investigating which processes could be suitable for an industrial scale ASR treatment plant. Sieving followed by floatation reported good result in thermochemical conversion of polymers with polyolefins giving excellent conversion rate. This factor triggered ecodesign considerations. Ecodesign, together with LCA, is one of the Industrial Ecology pillars and it consists of design for recycling and design for disassembly, both aimed at the improvement of car components dismantling speed and the substitution of non recyclable material. Finally, during the last year, innovative plants and technologies for metals recovery from car fluff have been visited and tested worldwide in order to design a new car fluff treatment plant aimed at ASR energy and material recovery.

Untersuchungen zur biologischen Bekämpfung der Kleidermotte Tineola bisselliella (Hummel 1823) und anderer tineider Textilschädlinge (Lepidoptera: Tineidae) mit parasitoiden Hymenopteren

Nach den Ergebnissen der vorliegenden Arbeit ist eine biologische Bekämpfung von Kleider- und Pelzmotten durch die gezielte Freilassungen von parasitoiden Hymenopteren als deren natürliche Gegenspieler möglich. Es wurden erstmalig ausführliche Versuche zur Parasitierung der Kleider- und Pelzmotte, insbesondere durch Eiaparasitoide der Gattung Trichogramma, durchgeführt. Für die braconide Schlupfwespe Apanteles carpatus wurde eine Zucht- und Freilassungsmethode entwickelt. Sie kann nun als neuer Nützlinge gegen textilschädigende Mottenlarven eingesetzt werden. Eine natürliche Parasitierung textilschädigender Motten durch Eiparasitoide ist bislang nicht nachgewiesen worden. Die Tineiden erwiesen sich im Laborversuch für Trichogramma als gut geeignete Wirte. Hinsichtlich der praktischen Anwendung von Eiparasitoiden der Gattung Trichogramma konnte aus einer Auswahl von 29 Arten und Stämmen aus einer Laborzucht mit T. piceum (Stamm: PIC M 91) eine besonders geeignete Art selektiert werden. Dieser Stamm zeigte die höchste Parasitierungsrate mit über 80 Eiern bei Temperaturen von 20-25°C und einer Lebensdauer von bis zu 17 Tagen. Im Präferenztest wurden sowohl Eier der Kleidermotte als auch der Getreidemotte, dem Massenzuchtwirt, von allen Stämmen mit Abstand am besten parasitiert. Das Geschlechterverhältnis von T. piceum lag bei über 80%. Der untersuchte Stamm von Apanteles carpatus zeigte bei 25°C eine durchschnittliche Nachkommenzahl von 55 pro Weibchen. Die Parasitoide erreichten jedoch nur unter optimalen Bedingungen eine Lebensdauer von bis zu 14 Tagen. In den Käfigversuchen ohne zusätzliche Nahrungsquellen wurden die Tiere nicht älter als 4 Tage. Es war nicht möglich, für A. carpatus Ersatzwirte für eine Massenzucht zu finden, da sie offensichtlich auf Tineiden spezialisiert sind, jedoch konnte ein Zuchtsystem mit Kleidermotten als Zuchtwirte etabliert werden. Die ausgewählten Trichogramma-Arten wurden in Käfigversuchen ausführlich untersucht und im Hinblick auf ihre Suchleistung auf verschiedenen Stoffoberflächen geprüft. Es wurde festgestellt, dass die getesteten Arten sehr unterschiedlich geeignet sind, um Textilien nach Eiern abzusuchen. Die Arten T. evanescens (Stamm: Lager) und T. piceum (PIC M 91) erwiesen sich als in der Suchleistung als am besten geeignet. Im Vergleich dazu zeigte T. cacoeciae (CAC D 90 O) sehr wenig Suchleistugsvermögen auf Textilien. Die geeigneten Arten durchdrangen außer verschiedenen Textilien auch grobe Schafwolle bis zu 0,4 m vom Freilassungsort. Das Ködern von Larvalparasitoiden von tineiden Motten im Freiland erwies sich als nicht erfolgreich. Trotzdem in der Literatur eine Reihe parasitoider Hymenopteren als Gegenspieler von Tineiden beschrieben sind und in Innenräumen beobachtet wurden, war es nicht möglich, weitere freilebende Arten zu ködern. Sowohl für das Ködern im Freiland als auch für die Rückköderung in Lagern wurden Ködermethoden getestet und optimiert. Nebenwirkungstests haben ergeben, dass die Nützlinge ergänzend zum Einsatz von Niem-Präparaten an schlecht zugänglichen Befallsstellen eingesetzt werden können. Ebenso wurde ermittelt, dass eine Kombination des Nützlingseinsatzes mit Repellents möglich ist. Bei zu hoher Konzentration der Wirkstoffe, den reinen Niem-Öl und konzentriertem Lavendel-Öl, in geschlossenen Glaskäfigen, wurden starke Nebenwirkungen auf Trichogramma festgestellt. In größerem Raumvolumen oder geringerer Dosierung der Wirkstoffe parasitierte Trichogramma allerdings auch Ködereier, die sich auf Niem-behandeltem Stoff befanden. Erste Freilassungsversuche in der Praxis ergaben unterschiedliche Erfolge. Nach einer Freilassung von Apanteles carpatus in einem Wohnhaus, das mit Schafwolle gedämmt wurde, reduzierte sich Fang von adulten Motten auf Pheromon-Klebfallen deutlich. In einem Textillager hingegen war es mit einer einmaligen Freilassung jedoch nicht möglich, die Gegenspieler zu etablieren und den Mottenbefall zu kontrollieren. Die mehrwöchige Freilassung von Trichogramma in einem Textillager konnte dazu beitragen, einen Pelzmottenbefall zu reduzieren. Hier zeigten sich Möglichkeiten und Grenzen des Einsatzes von parasitoiden Schlupfwespen gegen Textilmotten gleichermaßen.

Tailoring properties and functionalities of TiO2 and Ag nanoparticles involved in surfaces engineering processes

The functionalization of substrates through the application of nanostructured coatings allows to create new materials, with enhanced properties. In this work, the development of self-cleaning and antibacterial textiles, through the application of TiO2 and Ag based nanostructured coatings was carried out. The production of TiO2 and Ag functionalized materials was achieved both by the classical dip-padding-curing method and by the innovative electrospinning process to obtain nanofibers doped with nano-TiO2 and nano-Ag. In order to optimize the production of functionalized textiles, the study focused on the comprehension of mechanisms involved in the photocatalytic and antibacterial processes and on the real applicability of the products. In particular, a deep investigation on the relationship between nanosol physicochemical characteristics, nanocoating properties and their performances was accomplished. Self-cleaning textiles with optimized properties were obtained by properly purifying and applying commercial TiO2 nanosol while the studies on the photocatalytic mechanism operating in self-cleaning application demonstrated the strong influence of hydrophilic properties and of interaction surface/radicals on final performance. Moreover, a study about the safety in handling of nano-TiO2 was carried out and risk remediation strategies, based on “safety by design” approach, were developed. In particular, the coating of TiO2 nanoparticles by a SiO2 shell was demonstrated to be the best risk remediation strategy in term of biological response and preserving of photoreactivity. The obtained results were confirmed determining the reactive oxygen species production by a multiple approach. Antibacterial textiles for biotechnological applications were also studied and Ag-coated cotton materials, with significant anti-bacterial properties, were produced. Finally, composite nanofibers were obtained merging biopolymer processing and sol-gel techniques. Indeed, electrospun nanofibers embedded with TiO2 and Ag NPs, starting from aqueous keratin based formulation were produced and the photocatalytic and antibacterial properties were assessed. The results confirmed the capability of electrospun keratin nanofibers matrix to preserve nanoparticle properties.

Effectively Engaging with a Dragon: Examining the Nature and Impact of the Most Recent Decade of Sino-African Multilateral Relations

The goal of my research is to examine in detail the impact of the increase in Sino-African trade on African political and economic development. The primary focus will be on two central aspects of Sino-African trade: the effects of China’s natural resource binge coupled with the flood of textiles and other manufactured goods from China to Africa. This thesis will determine the precise nature and extent ofSino-African trade in these sectors and will attempt to determine whether or not Chinese trade is having a net positive impact on long-term African economic development. I will investigate this issue from numerous perspectives using English, Chinese, and African sources.

Colour Symbolism, Colour Preference in Hungarian Folklore and Folk Architecture"

The Hungarian way of decoration has certain characteristics which are rooted in the deep symbolism of ancient Hungarian mythical thinking. The ancient heritage of the Hungarians' former homeland somewhere in the Urals included eastern elements. During their migrations, the Hungarian tribes met other eastern peoples and their culture of decoration became mixed with elements drawn from these new contacts. These diverse influences mean that the Hungarian way of thinking, building and ornamentation show a certain dualism of Puritanism and rationalism in the creation of space and manufacturing, and rich fantasy in decoration and ornamentation. The Hungarians use coloured ornamentation to emphasise the symbolic importance of details. The colouring system of the built environment shows the same dualism: the main colour of the facades and inner walls is white, while the furniture, textiles, gates and windows, and sometimes the gable and fireplace are richly decorated. In Hungarian symbolism, the house and settlement are a model of the universe, so their different parts also have a transcendent meaning. The traditional meanings of the different colours reflect this transcendence. Each colour has ambivalent meanings: RED - the colour of blood - means violence and love. YELLOW - means sickness, death and ripeness (golden yellow). BLUE - means innocence, eternity (light blue) and old age, death (dark blue). BLACK - can be both ceremonial and mourning. WHILE - can have sacred meaning (bright white), while yellowish white fabric is the most common garb of both men and women in village society. GREEN - the only colour without a dual meaning, symbolises the beginning of life. Until the late 18th and early 19th centuries Hungarian folk art used one or two-coloured decoration (red, black, blue, red-blue or red-black), and from the early 19th century it moved to multi-coloured decoration. Colours are characteristically used in complementary contrast, with bright colours on a plain ground and an avoidance of subtle shadings.

Acute respiratory syndrome after inhalation of waterproofing sprays: a posteriori exposure-response assessment in 102 cases

Waterproofing agents are widely used to protect leather and textiles in both domestic and occupational activities. An outbreak of acute respiratory syndrome following exposure to waterproofing sprays occurred during the winter 2002-2003 in Switzerland. About 180 cases were reported by the Swiss Toxicological Information Centre between October 2002 and March 2003, whereas fewer than 10 cases per year had been recorded previously. The reported cases involved three brands of sprays containing a common waterproofing mixture, that had undergone a formulation change in the months preceding the outbreak. A retrospective analysis was undertaken in collaboration with the Swiss Toxicological Information Centre and the Swiss Registries for Interstitial and Orphan Lung Diseases to clarify the circumstances and possible causes of the observed health effects. Individual exposure data were generated with questionnaires and experimental emission measurements. The collected data was used to conduct numeric simulation for 102 cases of exposure. A classical two-zone model was used to assess the aerosol dispersion in the near- and far-field during spraying. The resulting assessed dose and exposure levels obtained were spread on large scales, of several orders of magnitude. No dose-response relationship was found between exposure indicators and health effects indicators (perceived severity and clinical indicators). Weak relationships were found between unspecific inflammatory response indicators (leukocytes, C-reactive protein) and the maximal exposure concentration. The results obtained disclose a high interindividual response variability and suggest that some indirect mechanism(s) predominates in the respiratory disease occurrence. Furthermore, no threshold could be found to define a safe level of exposure. These findings suggest that the improvement of environmental exposure conditions during spraying alone does not constitute a sufficient measure to prevent future outbreaks of waterproofing spray toxicity. More efficient preventive measures are needed prior to the marketing and distribution of new waterproofing agents.