Study of silicon-on-insulator multiple-gate MOS structures including band-gap engineering and self heating effects

The progresses of electron devices integration have proceeded for more than 40 years following the well–known Moore’s law, which states that the transistors density on chip doubles every 24 months. This trend has been possible due to the downsizing of the MOSFET dimensions (scaling); however, new issues and new challenges are arising, and the conventional ”bulk” architecture is becoming inadequate in order to face them. In order to overcome the limitations related to conventional structures, the researchers community is preparing different solutions, that need to be assessed. Possible solutions currently under scrutiny are represented by: • devices incorporating materials with properties different from those of silicon, for the channel and the source/drain regions; • new architectures as Silicon–On–Insulator (SOI) transistors: the body thickness of Ultra-Thin-Body SOI devices is a new design parameter, and it permits to keep under control Short–Channel–Effects without adopting high doping level in the channel. Among the solutions proposed in order to overcome the difficulties related to scaling, we can highlight heterojunctions at the channel edge, obtained by adopting for the source/drain regions materials with band–gap different from that of the channel material. This solution allows to increase the injection velocity of the particles travelling from the source into the channel, and therefore increase the performance of the transistor in terms of provided drain current. The first part of this thesis work addresses the use of heterojunctions in SOI transistors: chapter 3 outlines the basics of the heterojunctions theory and the adoption of such approach in older technologies as the heterojunction–bipolar–transistors; moreover the modifications introduced in the Monte Carlo code in order to simulate conduction band discontinuities are described, and the simulations performed on unidimensional simplified structures in order to validate them as well. Chapter 4 presents the results obtained from the Monte Carlo simulations performed on double–gate SOI transistors featuring conduction band offsets between the source and drain regions and the channel. In particular, attention has been focused on the drain current and to internal quantities as inversion charge, potential energy and carrier velocities. Both graded and abrupt discontinuities have been considered. The scaling of devices dimensions and the adoption of innovative architectures have consequences on the power dissipation as well. In SOI technologies the channel is thermally insulated from the underlying substrate by a SiO2 buried–oxide layer; this SiO2 layer features a thermal conductivity that is two orders of magnitude lower than the silicon one, and it impedes the dissipation of the heat generated in the active region. Moreover, the thermal conductivity of thin semiconductor films is much lower than that of silicon bulk, due to phonon confinement and boundary scattering. All these aspects cause severe self–heating effects, that detrimentally impact the carrier mobility and therefore the saturation drive current for high–performance transistors; as a consequence, thermal device design is becoming a fundamental part of integrated circuit engineering. The second part of this thesis discusses the problem of self–heating in SOI transistors. Chapter 5 describes the causes of heat generation and dissipation in SOI devices, and it provides a brief overview on the methods that have been proposed in order to model these phenomena. In order to understand how this problem impacts the performance of different SOI architectures, three–dimensional electro–thermal simulations have been applied to the analysis of SHE in planar single and double–gate SOI transistors as well as FinFET, featuring the same isothermal electrical characteristics. In chapter 6 the same simulation approach is extensively employed to study the impact of SHE on the performance of a FinFET representative of the high–performance transistor of the 45 nm technology node. Its effects on the ON–current, the maximum temperatures reached inside the device and the thermal resistance associated to the device itself, as well as the dependence of SHE on the main geometrical parameters have been analyzed. Furthermore, the consequences on self–heating of technological solutions such as raised S/D extensions regions or reduction of fin height are explored as well. Finally, conclusions are drawn in chapter 7.

Mobile TuCSoN: theoretical and technological requirements for TuCSoN's porting over Android mobile devices

Communication and coordination are two key-aspects in open distributed agent system, being both responsible for the system’s behaviour integrity. An infrastructure capable to handling these issues, like TuCSoN, should to be able to exploit modern technologies and tools provided by fast software engineering contexts. Thesis aims to demonstrate TuCSoN infrastructure’s abilities to cope new possibilities, hardware and software, offered by mobile technology. The scenarios are going to configure, are related to the distributed nature of multi-agent systems where an agent should be located and runned just on a mobile device. We deal new mobile technology frontiers concerned with smartphones using Android operating system by Google. Analysis and deployment of a distributed agent-based system so described go first to impact with quality and quantity considerations about available resources. Engineering issue at the base of our research is to use TuCSoN against to reduced memory and computing capability of a smartphone, without the loss of functionality, efficiency and integrity for the infrastructure. Thesis work is organized on two fronts simultaneously: the former is the rationalization process of the available hardware and software resources, the latter, totally orthogonal, is the adaptation and optimization process about TuCSoN architecture for an ad-hoc client side release.

Functional components and lipid quality assessment in vegetable foods: analytical and technological approaches

Lipids are important components that contribute very significantly to nutritional and technological quality of foods because they are the least stable macro-components in foods, due to high susceptibility to oxidation. When rancidity take place, it makes food unhealthy and unacceptable for consumers. Thus, the presence of antioxidants, naturally present of added to foods, is required to enhance shelf life of foods. Moreover, antioxidant like phenolic compounds play an important role in human health enhancing the functionality of foods. The aim of this PhD project was the study of lipid quality and lipid oxidation in different vegetable foods focusing on analytical and technological aspects in order to figure out the effects of lipid composition and bioactive compounds (phenolic compounds, omega-3 fatty acids and dietary fiber) addition on their shelf life. In addition, bioavailability and antioxidant effects of phenolic compounds in human and animals, respectively, were evaluated after consumption of vegetable foods. The first section of the work was focused on the evaluation of lipid quality impact on technological behaviour of vegetable foods. Because of that, cocoa butter with different melting point were evaluated by chromatographic techniques (GC, TLC) and the sample with the higher melting point showed the presence of fatty acids, triglycerides, 2-monoglycerides and FT-IR profile different from genuine cocoa butter, meaning an adding of foreign fat (lauric-fat) not allowed by the law. Looking at lipid quality of other vegetable foods, an accelerated shelf life test (OXITEST®), was used to evaluate of lipid stability to oxidation in tarallini snacks made up using different lipid matrices (sunflower oil, extravirgin olive oil and a blend of extravirgin olive oil and lard). The results showed a good ability of OXITEST® to discriminate between lipid unsaturation and different cooking times, without any samples fat extraction. In the second section, the role of bioactive compounds on cereal based food shelf life was studied in different bakeries by GC, spectrophotometric methods and capillary electrophoresis. It was examined the relationships between phenolic compounds, added with flour, and lipid oxidation of tarallini and frollini. Both products showed an increase in lipid oxidation during storage and antioxidant effects on lipid oxidation were not as expected. Furthermore, the influence of enrichment in polyunsaturated fatty acids on lipid oxidation of pasta was evaluated. The results proved that LC n-3 PUFA were not significantly implicated in the onset of oxidation in spaghetti stored under daylight and accelerated oxidation in a laboratory heater. The importance of phenolic compounds as antioxidant in humans and rats was also studied, by HPLC/MS in the latter section. For this purpose, apigenin and apigenin glycosides excretion was investigated in six women’s urine in a 24 hours study. After a single dose of steamed artichokes, both aglicone and glucuronide metabolites were recovered in 24 h urine. Moreover, the effect of whole grain durum wheat bread and whole grain Kamut® khorasan bread in rats were evaluated. Both cereals were good sources of antioxidants but Kamut® bread fed animals had a better response to stress than wheat durum fed, especially when a sourdough bread was supplied.

Technological innovation in Emilia-Romagna: knowledge, practice, strategies

The present study aims at assessing the innovation strategies adopted within a regional economic system, the Italian region Emilia-Romagna, as it faced the challenges of a changing international scenario. As the strengthening of the regional innovative capabilities is regarded as a keystone to foster a new phase of economic growth, it is important also to understand how the local industrial, institutional, and academic actors have tackled the problem of innovation in the recent past. In this study we explore the approaches to innovation and the strategies adopted by the main regional actors through three different case studies. Chapter 1 provides a general survey of the innovative performance of the regional industries over the past two decades, as it emerges from statistical data and systematic comparisons at the national and European levels. The chapter also discusses the innovation policies that the regional government set up since 2001 in order to strengthen the collaboration among local economic actors, including universities and research centres. As mechanics is the most important regional industry, chapter 2 analyses the combination of knowledge and practices utilized in the period 1960s-1990s in the design of a particular kind of machinery produced by G.D S.p.A., a world-leader in the market of tobacco packaging machines. G.D is based in Bologna, the region’s capital, and is at the centre of the most important Italian packaging district. In chapter 3 the attention turns to the institutional level, focusing on how the local public administrations, and the local, publicly-owned utility companies have dealt with the creation of new telematic networks on the regional territory during the 1990s and 2000s. Finally, chapter 4 assesses the technology transfer carried out by the main university of the region – the University of Bologna – by focusing on the patenting activities involving its research personnel in the period 1960-2010.

Design, synthesis and Chemical-physical characterization of photocatalytic inorganic nanocrystals for technological applications

This work was based on the synthesis and characterization of innovative crystals for biomedical and technological applications. Different types of syntheses were developed in order to obtain crystals with high photocatalytic properties. A hydrothermal synthesis was also processed to correlate the chemical-physical characteristics with synthesis parameters obtaining synthesis of nanoparticles of titanium dioxide with different morphology, size and crystalline phase depending on the variation of the synthesis parameters. Also a synthesis in water at 80 °C temperature and low pressure was developed from which anatase containing a small percentage of brookite nanoparticles were obtained, presenting a high photocatalytic activity. These particles have been used to obtain the microcrystals formed by an inorganic core of hydroxyapatite surface covered by TiO2 nanoparticles. Micrometer material with higher photocatalytic has been produced. The same nanoparticles have been functionalized with resorcinol oxidized in order to increase the photocatalytic efficiency. Photodegradation test results have confirmed this increase. Finally, synthetic nanoparticles with a waterless synthesis using formic acid and octanol, through esterification "in situ" were synthesized. Nanoparticles superficially covered by carboxylic residues able to bind a wide range of molecules to obtain further photocatalytic properties were obtained.

Skin tissue engineering: medical problems and technological solutions.

In questo elaborato si affrontano problematiche cliniche legate ai traumi gravi della cute in cui è necessario intervenire chirurgicamente per ripristinare una situazione normale: si approfondisce lo studio della fisiologia del tessuto, la classificazione dei gradi delle ustioni della pelle, la guarigione delle ferite e la meccanica della cute. Il trapianto di tessuto autologo costituisce la soluzione più efficace e con minori complicazioni. Tuttavia il paziente potrebbe non presentare una superficie di cute disponibile sufficientemente estesa, per cui si ricorre ad altri metodi. In primo luogo, si effettuano degli allotrapianti di tessuto di donatore cadavere prelevati secondo le normative vigenti e conservati attraverso le varie tecniche, il cui sviluppo ha consentito una durata di conservazione maggiore; mentre la glicerolizzazione abbatte al 100% il rischio di trasmissione di patologie e lo sviluppo di microorganismi, la crioconservazione preserva la vitalità del tessuto. La chirurgia utilizzata per queste operazioni si avvale di tecnologie innovative come la Tecnologia a Pressione Negativa. Un'alternativa necessaria per sopperire all'ingente richiesta di tessuto di donatore sono i sostituti cutanei, che presentano un grande potenziale per il futuro. Per eliminare totalmente il rischio di rigetto sarebbe necessario personalizzare il costrutto utilizzando cellule autologhe, ma la ricerca è stata rallentata da minori investimenti da parte dell'industria biomedica, che si è maggiormente focalizzata sulla realizzazione di prodotti utilizzabili da un più ampio raggio di pazienti. Per queste ragioni, l'ingegneria tissutale della cute ha trovato più ampio campo di applicazione nel sistema dei test in vitro. A tale scopo sono stati creati dei protocolli certificati per testare la corrosività, la irritabilità e la vitalità del tessuto cutaneo, quali EpiDerm, EpiSkin e SkinEthic che si avvalgono dell'uso del metodo MMT e della spettrofotometria, che è diventata un supporto fondamentale per le scienze biologiche.

Technological trajectories and environmental policy: the transformation of the automobile

This thesis aims to fill the gap in the literature by examining the relationship between technological trajectories and environmental policy in the automotive industry, focusing on the role of environmental policies in unlocking the industry from fossil fuel path-dependence. It first explores the inducement mechanism that underpins the interaction between environmental policy and green technological advances, investigating under what conditions the European environmental transport policy portfolio and the intrinsic characteristics of assignees' knowledge boost worldwide green patent production. Subsequently, the thesis empirically analyses the dynamics of technological knowledge involved in technological trajectories assessing evolution patterns such as variation, selection and retention, in order to study the impact of policy implementation on technological knowledge related to electric and hybrid vehicle technologies. Finally, the thesis sheds light on the drivers that encourage a shift from incumbent internal combustion engine technologies towards low-emission vehicle technologies. This analysis tests whether tax-inclusive fuel prices and technological proximity between technological fields induce a shift from non-environmental inventions to environmentally friendly inventive activities and if they impact the competition between alternative vehicle technologies. The findings provide insights into the effectiveness of environmental policy in triggering inventive activities related to the development of alternative vehicle technologies. In addition, there is evidence that environmental policy redirects technological efforts towards a sustainable path and impacts the competition between low-emission vehicles.

Ternary lithium based compounds used for technological applications

Im Rahmen dieser Dissertation wurden ternäre Li-haltige Halb-Heusler Verbindungen sowie dazu strukturell-verwandte Verbindungen untersucht. Diese Verbindungen sind potentielle Kandidaten für optoelektronische und spintronische Anwendungen.rnEinige der untersuchten Verbindungen sind auch als Elektroden Materialien inrnLi-Batterien geeignet. Neben der Synthese und der Untersuchung der chemischenrnEigenschaften wurden daher insbesondere die physikalischen Eigenschaften näherrnuntersucht. Im speziellen wurden Halb-Heusler Verbindungen wie LiMgZ (Z = P,rnAs, Sb) und LiZn1−xMnxP synthetisiert und charakterisiert. Des Weiteren wurdenrndie Verbindungen LiMnAs, LaOMnAs und LiCuS näher studiert.rnVerbindungen des Typs LiMgZ (Z = P, As, Sb) sind potentielle Anode-Materialienrnin Li-Batterien. Im Rahmen der Arbeit gelang es diese Verbindungen einphasig zurnsynthetisieren. Mit Hilfe der UV-VIS Spektroskopie wurden Bandlücken im Bereichrnvon 0.9 und 2.3 eV bestimmt. 7Li NMR Spektroskopie zeigte eine ausreichende LirnMobilität, die sich mit steigender Temperatur erhöht.rnWeiterhin wurde die Mischkristallserie LiZn1−xMnxP mit x = 0.04, 0.08 und 0.10rnuntersucht. Ziel dieser Arbeit war es aus dem Halbleiter LiZnP durch Dotierungrneinen verdünnten magnetischen Halbleiter herzustellen. Diese Materialien werdenrninsbesondere in der Spintronik benötigt. Optische Messungen zeigten, dass diernDotierung bis x = 0.10 zu einer Reduzierung der Bandlücke von 1.80 eV für LiZnPrnzu 1.18 eV für LiZn0.90Mn0.10P führt. Magnetische Untersuchungen erwiesen paramagnetischesrnCurie-Weiss Verhalten und negative Weiss Konstanten, die auf einernantiferromagnetische Ordnung bei tiefen Temperaturen hindeuten.rnLiMnAs und LaOMnAs sind beides antiferromagnetische Halbleiter, die insbesonderernf¨ur spinelektronische Anwendungen von Bedeutung sind. Die magnetischernStruktur von LiMnAs wurde mit Hilfe der Neutronenbeugung näher untersucht. DiernNeel Temperatur wurde zu 374 K bestimmt. Bei einer Temperatur von T = 768 Krnkommt es zu einer Phasenumwandlung. Die tetragonale Struktur wandelt sich hierrnin einer kubischen Halb-Heusler Phase um. Dichte Funktional Rechnungen sind inrnguter Übereinstimmung mit den experimentellen Werten. Darüberhinaus wurde diernKopplung der magnetischen Momente näher bestimmt.rnrnEine Verbindung der Zusammensetzung LiCuS wurde in der Literatur beschriebenrnals eine Phase, die sich bei der Reaktion von Li mit CuS in Li/CuS Batteriesystemrnbildet. Diese Verbindung ist auch als Ersatz von CdS in Pufferschicht vonrnDünnfilm-Solarzellen von Interesse. Es gelang erstmals diese Verbindung einphasigrnherzustellen. Sie kristallisiert gelb mit der nicht-stöchiometrischen ZusammensetzungrnLi1.1Cu0.9S. Die Kristallstruktur wurde mit Hilfe von NMR, PXRD und Neutronenbeugungrnaufgeklärt. Die Bandlücke wurde aus den optischen Messungenrnvon Dünnschichten bestimmt und beträgt circa 2 eV. Dieser Wert ist in guter Übereinstimmung mit DFT Ergebnissen. Wird der Li-Gehalt erhöht, erhält manrnab circa Li1.7Cu0.3S eine kubische Phase. Sie ist isotyp mit Li2S, die im anti-CaF2 Typ kristallisiert. Diese Verbindung ist ein direkter Halbleiter mit einer Bandlücke von 2.4 eV nach DFT Rechnungen.

Position paper on the management of patients with obstructive sleep apnea and hypertension: joint recommendations by the European Society of Hypertension, by the European Respiratory Society and by the members of European COST (COoperation in Scientific and Technological research) ACTION B26 on obstructive sleep apnea

This article is aimed at addressing the current state of the art in epidemiology, pathophysiology, diagnostic procedures and treatment options for appropriate management of obstructive sleep apnea (OSA) in cardiovascular (particularly hypertensive) patients, as well as for the management of cardiovascular diseases (particularly arterial hypertension) in OSA patients. The present document is the result of the work done by a panel of experts participating in the European Union COST (COoperation in Scientific and Technological research) ACTION B26 on OSA, with the endorsement of the European Respiratory Society (ERS) and the European Society of Hypertension (ESH). These recommendations are particularly aimed at reminding cardiovascular experts to consider the occurrence of sleep-related breathing disorders in patients with high blood pressure. They are at the same time aimed at reminding respiration experts to consider the occurrence of hypertension in patients with respiratory problems at night.

Computer-assisted liver surgery: clinical applications and technological trends

Oncological liver surgery and interventions aim for removal of tumor tissue while preserving a sufficient amount of functional tissue to ensure organ regeneration. This requires detailed understanding of the patient-specific internal organ anatomy (blood vessel system, bile ducts, tumor location). The introduction of computer support in the surgical process enhances anatomical orientation through patient-specific 3D visualization and enables precise reproduction of planned surgical strategies though stereotactic navigation technology. This article provides clinical background information on indications and techniques for the treatment of liver tumors, reviews the technological contributions addressing the problem of organ motion during navigated surgery on a deforming organ, and finally presents an overview of the clinical experience in computer-assisted liver surgery and interventions. The review concludes that several clinically applicable solutions for computer aided liver surgery are available and small-scale clinical trials have been performed. Further developments will be required more accurate and faster handling of organ deformation and large clinical studies will be required for demonstrating the benefits of computer aided liver surgery.