Current-induced transition in atomic-sized contacts of metallic alloys

We have measured conductance histograms of atomic point contacts made from the noble-transition-metal alloys CuNi, AgPd, and AuPt for a concentration ratio of 1:1. For all alloys these histograms at low-bias voltage (below 300 mV) resemble those of the noble metals, whereas at high bias (above 300 mV) they resemble those of the transition metals. We interpret this effect as a change in the composition of the point contact with bias voltage. We discuss possible explanations in terms of electromigration and differential diffusion induced by current heating.

The dissociation of molecularly adsorbed CO and CN over the 4d transition metals: A universal relationship between the reaction barriers and the reaction enthalpies

Density functional theory calculations are used to study the stability of molecularly adsorbed CO and CN over transition metal surfaces. The minimum energy reaction pathways, corresponding reaction barriers (E-a), and reaction enthalpies (Delta H) for the dissociation of CO and CN to atomic products over the 4d transition metals from Zr to Pd have been determined. CO is found to be the more stable adsorbate on the right hand side of the period (from Tc onwards), whereas CN is the more stable surface species on the early metals (Zr, Nb and Mo). A single linear relationship is found to exist that correlates the barriers of both reactions with their respective reaction enthalpies. (c) 2006 Elsevier B.V. All rights reserved.

Adsorption of metal ions on nitrogen surface functional groups in activated carbons

A commercially available coconut-shell-derived active carbon was oxidized with nitric acid, and both the original and oxidized active carbons were treated with ammonia at 1073 K to incorporate nitrogen functional groups into the carbon. An active carbon with very high nitrogen content (similar to9.4 wt % daf) was also prepared from a nitrogen-rich precursor, polyacrylonitrile (PAN). These nitrogen-rich carbons had points of zero charge (pH(pzc)) similar to H-type active carbons. X-ray absorption near-edge structure (XANES) spectroscopy, Fourier transform infrared (FTIR) spectroscopy, and temperature-programmed desorption (TPD) were used to characterize the nitrogen functional groups in the carbons. The nitrogen functional groups present on the carbon surface were pyridinic, pyrrolic (or indolic), and pyridonic structures. The adsorption of transition metal cations Cd2+, Ni2+, and Cu2+ from aqueous solution on the suite of active carbons showed that adsorption was markedly higher for carbons with nitrogen functional groups present on the surface than for carbons with similar pH(pzc) values. In contrast, the adsorption characteristics of Ca2+ from aqueous solution were similar for all the carbons studied. Flow microcalorimetry (FMC) studies showed that the enthalpies of adsorption of Cd2+(aq) on the active carbons with high nitrogen contents were much higher than for nitric acid oxidized carbons studied previously, which also had enhanced adsorption characteristics for metal ion species. The enthalpies of adsorption of Cu2+ were similar to those obtained for Cd2+ for specific active carbons. The nitrogen functional groups in the carbons act as surface coordination sites for the adsorption of transition metal ions from aqueous solution. The adsorption characteristics of these carbons are compared with those of oxidized carbons.

Insights into the Staggered Nature of Hydrogenation Reactivity over the 4d Transition Metals

Hydrogenation reactions at transition metal surfaces comprise a key set of reactions in heterogeneous catalysis. In this paper, density functional theory methods are employed to take an in-depth look at this fundamental reaction type. The energetics of hydrogenation of atomic C, N, and O have been studied in some detail over low index Zr, Nb, Mo, Tc, Ru, Rh, and Pd surfaces. Detailed bonding analysis has also been employed to track carefully the chemical changes taking place during reaction. A number of interesting horizontal and vertical trends have been uncovered relating to reactant valency and metal d-band filling. A general correlation has also been found between the reaction barriers and the reaction potential energies. Moreover, when each reaction is considered independently, correlation has been found to improve with decreasing reactant valency. Bonding analysis has pointed to this being related to the relative position of the transition state along the reaction coordinate and has shown that as reactant valency decreases, the transition states become progressively later.

Mer and fac isomerism in tris chelate diimine metal complexes

In this perspective, we highlight the issue of meridional (mer) and facial (fac) orientation of asymmetrical diimines in tris-chelate transition metal complexes. Diimine ligands have long been the workhorse of coordination chemistry, and whilst there are now good strategies to isolate materials where the inherent metal centered chirality is under almost complete control, and systematic methodologies to isolate heteroleptic complexes, the conceptually simple geometrical isomerism has not been widely investigated. In systems where the two donor atoms are significantly different in terms of the σ-donor and π-accepting ability, the fac isomer is likely to be the thermodynamic product. For the diimine complexes with two trigonal planar nitrogen atoms there is much more subtlety to the system, and external factors such as the solvent, lattice packing and the various steric considerations play a delicate role in determining the observed and isolable product. In this article we discuss the possibilities to control the isomeric ratio in labile systems, consider the opportunities to separate inert complexes and discuss the observed differences in their spectroscopic properties. Finally we report on the ligand orientation in supramolecular systems where facial coordination leads to simple regular structures such as helicates and tetrahedra, but the ability of the ligand system to adopt a mer orientation enables self-assembled structures of considerable beauty and complexity. 

Local atomic structure modulations activate metal oxide as electrocatalyst for hydrogen evolution in acidic water

Modifications of local structure at atomic level could precisely and effectively tune the capacity of materials, enabling enhancement in the catalytic activity. Here we modulate the local atomic structure of a classical but inert transition metal oxide, tungsten trioxide, to be an efficient electrocatalyst for hydrogen evolution in acidic water, which has shown promise as an alternative to platinum. Structural analyses and theoretical calculations together indicate that the origin of the enhanced activity could be attributed to the tailored electronic structure by means of the local atomic structure modulations. We anticipate that suitable structure modulations might be applied on other transition metal oxides to meet the optimal thermodynamic and kinetic requirements, which may pave the way to unlock the potential of other promising candidates as cost-effective electrocatalysts for hydrogen evolution in industry.

Modified electrodes with Keggin-type polyoxotungstates

O objectivo deste trabalho é a produção de novos eléctrodos modificados com polioxotungstatos (POMs) do tipo Keggin, incluindo POMs lacunares e substituídos por metais de transição. A preparação e caracterização dos polioxotungstatos encontram-se descritas no Capítulo 2. No Capítulo 3 descreve-se a produção de eléctrodos de carbono vítreo funcionalizados com sais híbridos de tetra-n-butilamónio de vários silicotungstatos pelo método de evaporação da gota. As propriedades electroquímicas dos polioxotungstatos imobilizados foram comparadas com as das espécies solúveis correspondentes. A morfologia dos depósitos foi avaliada por microscopia óptica e por microscopia electrónica de varrimento. No capítulo 4 descreve-se a preparação de novos eléctrodos compósitos de carbono e poli(hexilmetacrilato) com fosfotungstatos. Os estudos electroquímicos revelaram que as principais características dos POMs são mantidas e que os processos de redução são controlados por difusão, dependendo da difusão dos protões da solução. O Capítulo 5 descreve a construção de filmes em multicamadas ultrafinos contendo POMs e polietilenimina, preparados pelo método de auto-montagem camada-sobre-camada em eléctrodos de carbono vítreo. Os filmes em multicamada foram caracterizados por voltametria cíclica e por microscopia electrónica de varrimento e foi usada a espectroscopia de absorção de UV-Vis em placas de quartzo para monitorar o crescimento de filme. Os resultados voltamétricos revelaram que os processos de redução dos POM são confinados à superfície. Alguns destes eléctrodos modificados revelaram propriedades electrocatalíticas relativamente à redução dos aniões nitrito, bromato e/ou iodato. A espectroscopia de impedância electroquímica também foi usada na caracterização destes filmes e os resultados revelaram que a resistência à transferência de carga aumenta com o aumento do número de bicamadas para ambas as espécies redox, indicando que a espessura do filme tem um efeito importante sobre a cinética de reacções de transferência de carga. No capítulo 6 descreve-se a síntese de filmes híbridos orgânicos/inorgânicos compostos por poli(3,4-etilenodioxitiofeno) (PEDOT) e por silicotungstatos do tipo Keggin através da polimerização electroquímica, em condições aquosas, na superfície de electrodos de carbono vítreo. A voltametria cíclica revelou que as características principais dos POMs são mantidas nos filmes. Verificou-se que estes filmes são muito estáveis, possivelmente devido a fortes interacções electrostáticas entre os POMs aniónicos e o polímero positivamente carregado. A espectroscopia de impedância electroquímica foi também utilizada e os resultados mostraram que a resistência de transferência de carga aumenta com o aumento do pH e para valores de potenciais mais elevados. O capítulo 7 apresenta as conclusões finais e possíveis trabalhos futuros.

Nonaqueous sol-gel routes to doped metal oxide nanoparticles: synthesis, characterization, assembly and properties

The results presented in this thesis have been achieved under the Ph.D. project entitled “Nonaqueous Sol-Gel routes to doped metal oxide nanoparticles: Synthesis, characterization, assembly and properties”. The purpose of this study is the investigation of metal oxide nanostructures doped with metals of a diverse nature, leading to different type of applications. The easier control over the reaction kinetics in solvothermal routes, compared to aqueous methods, allows to better match the reactivity between metal oxide precursors, paving the way to a facile and low temperature production of doped oxides. In this manuscript diverse examples of the exploitation of the “Benzyl Alcohol Route” are discussed. Such a powerful pathway was utilized for the synthesis of transition metal doped zirconia, hafnia and various perovskites, and the study of their magnetic properties, as well as the synthesis of rare earth doped zirconium oxide. A further extension, proving the solidity of the synthetic method, is shown for the preparation of Li4Ti5O12 nanocrystals carrying excellent electrochemical properties for lithium-ion battery applications. Finally, the effect of doping and other reaction parameters on the assembly of the nanocrystals is discussed. These studies were carried out principally at the University of Aveiro, as well as at the University of Montpellier II and at the Seoul National University due to complementary available expertises and equipments.

Single-Molecule Magnets and Multifunctional Molecular Magnetic Materials Based on Polynuclear Metal Complexes

Our work on single molecule magnets and multifunctional magnetic materials is presented in four projects. In the first project we show for first time that heteroatomic-type pseudohalides, such as OCN-, can be employed as structure-directing ligands and ferromagnetic couplers in higher oxidation state metal cluster chemistry. The initial use of cyanato groups in Mn cluster chemistry has afforded structurally interesting MnII/III14 (1) and MnII/III/IV16 (2) clusters in which the end-on bridging cyanates show a preference in binding through their O-atom. The Mn14 compound shows entirely visible out-of-phase alternating currect signals below 5 K and large hysteresis loops below 2 K. Furthermore, the amalgamation of azido groups with the triethanolamine tripodal ligand in manganese carboxylate cluster chemistry has led to the isolation of a new ferromagnetic, high-nuclearity and mixed-valence MnII/III15Na2 (3) cluster with a large ground-state spin value of S = 14. In the second project we demonstrate a new synthetic route to purely inorganic-bridged, transition metal-azido clusters [CoII7 (4) and NiII7 (5)] and coordination polymers [{FeII/III2}n (6)] which exhibit strong ferromagnetic, SMM and long-range magnetic ordering behaviors. We also show that access to such a unique ferromagnetic class of inorganic, N-rich and O-free materials is feasible through the use of Me3SiN3 as the azido-ligand precursor without requiring the addition of any organic chelating/bridging ligand. In the last projects we have tried to bring together molecular magnetism and optics via the synthesis of multifunctional magnetic materials based on 3d- or 4f-metal ions. We decided to approach such challenge from two different directions: firstly, in our third project, by the deliberate replacement of non-emissive carboxylato ligands in known 3d-SMMs with their fluorescent analogues, without perturbing the metal-core structure and SMM properties (complexes 7, 8, and 9). The second route (last project) involves the use of naphthalene or pyridine-based polyalcohol bridging ligands for the synthesis of new polynuclear LnIII metal clusters (Ln = lanthanide) with novel topologies, SMM behaviors and luminescent properties arising from the increased efficiency of the “antenna” organic group. This approach has led us to the isolation of two new families of LnIII8 (complexes 10-13) and LnIII4 (complexes 14-20) clusters.

Développement d'un tandem multicatalytique méthylénation - couplage de Heck et Approche synthétique de l'Hodgsonox

Cette thèse comprend deux parties distinctes, dans lesquelles seront décrits tout d’abord, le développement d’un procédé multicatalytique en un seul pot d’une réaction de méthylénation suivie d’un couplage de Heck, puis dans un second temps, une étude vers la synthèse de l’Hodgsonox. Le premier thème de la thèse correspond à la mise en place d’un procédé en un seul pot, basé sur la méthodologie de méthylénation catalysée par un métal de transition, développée au sein du groupe du Pr. Lebel, et sur des couplages de Heck. Différentes études de compatibilité des réactifs mis en présence sont abordées, ainsi que le choix des conditions optimales (Pd(OAc)2 et P(o-tol)3) pour la réalisation d’un tel système qui ne requiert aucun isolement du produit intermédiaire. Il a été démontré que la présence de triphénylphosphine en excès inhibe la réaction de couplage de Heck, ce qui a finalement orienté notre choix vers les sels de cuivre pour la catalyse de la réaction de méthylénation. Le tandem séquentiel a ensuite été appliqué à la synthèse de divers stilbènes, notamment des composés dérivés du Resvératrol, molécule d’intérêt thérapeutique pour les maladies cardiovasculaires, et à la synthèse d’indanes substitués, avec un couplage intramoléculaire, avec de bons rendements. La deuxième partie de cette thèse traite de l’étude menée vers la synthèse de l’Hodgsonox. Cette molécule correspond à une nouvelle classe de sesquiterpènes tricycliques, comportant un dihydropyrane doté d’une fonction éther diallylique. Cette molécule représente un défi synthétique pour le groupe du Pr. Lebel, qui envisage de synthétiser les deux doubles liaisons terminales au moyen de la méthodologie de méthylénation développée au sein du groupe. L’Hodgsonox, dont la biosynthèse utilise la voie MEP, a un potentiel insecticide pour la croissance de la larve de la mouche verte d’Australie, Lucilia cuprina. La synthèse envisagée au cours de ces travaux est basée sur la formation préalable d’un cycle à 5 chaînons, comportant 3 centres stéréogéniques, puis sur la cyclisation du cycle pyranique au moyen d’une réaction d’insertion dans un lien O H. Un dédoublement cinétique dynamique sur une δ butyrolactone substituée permet de fixer la stéréochimie relative de deux centres chiraux dès la première étape. Le cycle à 5 chaînons est ensuite formé par métathèse après 6 étapes avec un rendement de 37%. Une addition conjuguée suivie d’une réaction de Saegusa et d’une réaction d’hydrosilylation introduit le groupement isopropyle de manière syn. Après mise en place d’un groupement céto-ester, un transfert de groupement diazonium permet de préparer le précurseur pour la réaction d’insertion dans un lien O-H. Le bicycle correspondant à la structure de base de l’Hodgsonox a été préparé au moyen de 16 étapes linéaires avec un rendement global de 12%.

Études spectroscopiques expérimentales et théoriques de complexes de métaux de transition

Cette thèse présente une série d'études qui visent la compréhension de la structure électronique de complexes de métaux de transition en employant diverses méthodes de spectroscopie. L'information sur la structure électronique aide à comprendre et développer des nouveaux matériaux, des nouvelles voies de synthèses, ainsi que des nouveaux modèles théoriques. Habituellement, afin d'explorer la structure électronique d'un système qui comporte en son centre un métal de transition, l'information fournie par les spectres d'un seul composé n'est pas suffisante. On étudie une série de composés similaires, qui ont le même métal de transition à un degré d'oxydation donné, ainsi que des ligands qui forment des liaisons de différentes forces et caractéristiques avec le métal. Cependant, ces changements, bien qu'on les désire de faible impact, créent une grande perturbation de la structure électronique visée par les études. Afin d'étudier en profondeur une seule structure électronique, nous employons une stratégie d'analyse moins perturbante. Nous appliquons une pression hydrostatique sur les complexes de métaux de transition. Cette pression perturbe le système suffisamment pour nous livrer davantage d'informations sur la structure électronique, sans la « dénaturer ». Afin d'étudier précisément ces systèmes perturbés, la technique d'application de pression est conjuguée, dans la littérature, aux diverses techniques de spectroscopie d'absorption UV-visible, de luminescence, ainsi que de diffusion Raman. Pour extraire un maximum d'informations de ces expériences, on emploie des techniques de calculs de structure électronique ainsi que de dynamique des noyaux. Dans cette thèse, on tente de mettre en lumière la structure électronique de composés de molybdène(IV), de platine(II) et palladium(II) à l'aide de la technique de pression couplée aux spectroscopies de luminescence et de diffusion Raman. Dans le chapitre 3, on observe un déplacement de la bande de luminescence de +12 cm-1/kbar entre la pression ambiante et 25 kbar pour le complexe trans-[MoOCl(CN-t-Bu)4]BPh4, dont le centre métallique molybdène(IV)est de configuration électronique 4d2. Il s'agit de la première variation positive observée pour un complexe de type métal-oxo. À des pressions plus élevées, la tendance s'inverse. Le maximum d'énergie de la bande de luminescence se déplace de -8 cm-1/kbar. Ce changement de variation présage d'une compétition interne entre les ligands situés sur les différents axes de l'octaèdre. À l'aide de calculs basés sur la théorie de la fonctionnelle de la densité, on propose un mécanisme pour expliquer ce phénomène. Au cours du chapitre 4, on étudie des complexes de palladium(II) et de platine(II) qui ont les mêmes ligands. Un de ces ligands est le 1,4,7-trithiacyclononane (ttcn). On constate qu'à basse pression le ligand est bidentate. Par contre, lorsque la pression augmente, on constate, par exemple à l'aide du complexe [Pt(ttcn)Cl2], qu'une interaction anti-liante supplémentaire se produit entre le ligand ttcn et le métal, ce qui change la nature de l'orbitale HOMO. On observe un déplacement de la bande de luminescence de -19 cm-1/kbar. Tel que pour le complexe de molybdène(IV), le déplacement de la bande de luminescence dépend de la compétition entre les ligands situés sur les différents axes de l'octaèdre. L'interaction liante entre l'ion platine(II) et l'atome de soufre axial est l'effet le plus plausible qui peut induire un déplacement de la bande de luminescence vers les basses énergies. Ceci nous indique que cette interaction domine. Par contre, pour ce qui est du complexe palladium(II), la compétition est remportée par d'autres effets, car le déplacement de la bande de luminescence est de +6 cm-1/kbar. Encore une fois, des calculs, basés sur la théorie de la fonctionnelle de la densité, aident à explorer les causes de ces observations en suggérant des explications corroborées simultanément par les diverses expériences de spectroscopie. Lors du chapitre 5, une étude plus exacte de la structure électronique ainsi que de la dynamique des noyaux de complexes de métaux de transition est présentée. En effet, les complexes de palladium(II) et de platine(II), de type [M(X)4]2-, ont une structure simple, très symétrique. Le premier état excité de ces molécules subit la distorsion Jahn-Teller. On veut établir un protocole de travail pour les expérimentateurs afin d'analyser des spectres de molécules pour lesquelles l'approximation de Born-Oppenheimer n'est pas valide. On utilise la théorie de la fonctionnelle de la densité dépendante du temps ainsi que le modèle de Heidelberg afin de décrire des effets non adiabatique. On tente d'établir l'influence des effets non adiabatiques sur les spectres de ce type de complexe.

Studies on Catalysis by Vanadia Supported On Metal Oxides

Catalysis is an essential technology in manufacturing industries. The investigation based on supported vanadia catalysts and it’s sulfated analogues. Vanadia is a transition metal oxide and is used in oxidation reactions in chemical industry. It is more active and selective catalysts on suitable supports. The work deals with preparation of vanadia incorporated tin oxide and zirconia systems by wet impregnation. Physico-chemical characterization using instrumental techniques like BET etc. The surface acidic properties were determined by the ammonia TPD studies, Perylene absorption studies and Cumene conversion reaction. The catalytic activities of the prepared systems are tested by Friedel-Crafts benzylation of arenes and Bechmann rearrangement of Cyclohexanol oxime. Here the rector reactions are relatively rare. So to test the application of the catalyst systems for the selective oxidation of cyclohexanol to cyclohexanone and finally evaluate the catalytic activity of the systems for the vapour phase oxidative dehydrogenation of Ethylbenzene, which leads to the formation of Industrially important compound ‘styrene’ is another objective of this work

Fabrication Of Potentiometric Sensors For The Determination Of Certain Metal Ions

In this study Fabrication of Potentiometric sensors for the determination of certain metal ions, presents the synthesis and characterization of seven ionophores, their use in the fabrication of potentiometric sensors and the results and discussion of fourteen sensors developed for the determination of five transition metal ions. As part of the present investigations a total of fourteen potentiometric sensors have been developed and fabricated. A three fold approach has been taken in developing he sensors, PVC plasticized membrane sensor, carbon paste electrode and chemically modified carbon paste electrode. All the sensors are highly useful in the determination of metal ions such as manganese, nickel, copper, mercury and lead. A through analytical study has been carried out with respect to each other developed. Based on these studies, optimum conditions have been developed for the quantitative determinations of the selected metal ions using the sensors. Systematic application studies have also been carried out for all the developed sensors and the results revealed that the presently developed sensors are far superior than most of the sensors reported.

Selective Methyl Tert-Butyl Ether Synthesis over Metal Exchanged Pillared Clays

Iron and mixed iron aluminium pillared montmorillonites prepared by partial hydrolysis method was subjected to room temperature exchange with transition metals of the first series. The materials exhibit good structural as well as thermal stability. Exchanged metals were found to be present inside the porous network, in the environs of the pillars. Mixed pillaring resulted in the intercalation of Al 13 like polymers in which Al is partially substituted by Fe. The acidic structure was followed by temperature programmed desorption of ammonia and cumene cracking test reaction. Weak and medium sites overshadow the strong sites in all systems. However, exchange with metals increases the number of strong sites. The prepared materials are efficient catalysts for gas phase MTBE synthesis. The catalytic activity can be well correlated with the total amount of weak and medium acid sites.

Chelating behavior of acylhydrazones towards transition metals:Spectral and structural aspects

The current work deals with the synthesis and characterization of metal complexes derived from some substituted acylhydrazones. The hydrazones under investigation were characterized by IR, UV, NMR spectral studies and the molecular structure of one of the hydrazones was solved by single crystal XRD studies. In the present work dioxovanadium(V), manganese(II), cobalt(II/III), nickel(II), copper(II), zinc(II) and cadmium(II) complexes were synthesized and characterized by various spectroscopic techniques, molar conductance measurements, magnetic susceptibility measurements and cyclic voltammetry. Single crystals of some of the complexes were isolated and characterized by single crystal X-ray diffraction.The thesis is divided into eight chapters. Chapter 1 gives an introduction on hydrazones, diversity in their chelating behavior and their application in various fields. This chapter also describes different analytical techniques employed for the characterization of hydrazones and their metal complexes. Chapter 2 includes the synthesis and characterization of two substituted acylhydrazones. This chapter also discusses how the coordination behavior of hydrazones under investigation is interesting. Chapters 3-8 discuss the synthesis and characterization of some transition metal complexes derived from the acylhydrazones under study.The hydrazones synthesized were found to exist in the amido form. Various characterization techniques were carried out to explore the structure of the synthesized complexes. The results indicate that both the hydrazones coordinate through the pyridyl and azomethine nitrogens and amide oxygen either in enolate or neutral form. Out of synthesized complexes V(V), Zn/Cd(II) and one of the cobalt complex was found to diamagnetic. We could isolate single crystals of some of the complexes and most of the complexes crystallized were found to have a distorted octahedral geometry. Thus X-ray crystallographic study which was used as major tool in the structure determination revealed that the hydrazones undergo a rotation about the azomethine bond on complexation. We hope the work presented in the thesis would be helpful for those who are working in the field of metal complexes and can further they can be utilized for various applications.