Implementation of a survey form marking system using image processing techniques on an Imputer

This paper describes the feasibility of the application of an Imputer in a multiple choice answer sheet marking system based on image processing techniques.

Industrial JIG measurements : survey measurements assisting QUT motorsport

This paper outlines our literature review background, investigation and practical application utilizing a precise optical survey level and total station technology for a specialist industrial measurement application. The practical part of the project was to measure and check specific critical features of the Industrial JIG assembly table used by the Queensland University of Technology (QUT) Motorsport group. The JIG is used in constructing a new Formula SAE race-car frame each year and is used throughout the racing season to check the production frame for twists, bends and potential stresses. The industrial JIG table required two survey approaches, firstly determination of the overall flatness throughout its’ steel base surface. Secondly was the validation of verticality of the steel uprights used to support and hold the race-car frame in place during construction and checking alignment for key suspension components. In addition the investigation brings realisations that there are far more accurate, efficient and economical technologies to be harnessed in industrial metrology.

Experiences in training ICD-10 trainers

The National Centre for Health Information Research & Training (formerly NCCH Brisbane) has been conducting an annual introductory ICD-10 coding program in Brisbane for seven years. In 2008, the Centre introduced a new initiative, inviting potential trainers to participate in a one week train the trainer workshop prior to the regular coder training. The new trainers are provided with the opportunity to practice their new skills with the support and assistance of the NCHIRT trainers during the subsequent introductory program. This paper will report on the results of a survey of participants of these programs about their experiences conducting training courses in their own countries. The train the trainer program as a means to create a cadre of trainers to support the implementation of ICD-11 will be explored.

Developing a model of embedding academic numeracy in university programs : a case study from nursing

This is a study of the academic numeracy of nursing students. This study develops a theoretical model for the design and delivery of university courses in academic numeracy. The following objectives are addressed: 1. To investigate nursing students' current knowledge of academic numeracy; 2. To investigate how nursing students’ knowledge and skills in academic numeracy can be enhanced using a developmental psychology framework; and 3. To utilise data derived from meeting objectives 1 and 2 to develop a theoretical model to embed academic numeracy in university programs. This study draws from Valsiner’s Human Development Theory (Valsiner, 1997, 2007). It is a quasi-experimental intervention case study (Faltis, 1997) and takes a multimethod approach using pre- and post-tests; observation notes; and semi-structured teaching sessions to document a series of microgenetic studies of student numeracy. Each microgenetic study is centered on the lived experience of students becoming more numerate. The method for this section is based on Vygotsky’s double stimulation (Valsiner, 2000a; 2007). Data collection includes interviews on students’ past experience with mathematics; their present feelings and experiences and how these present feelings and experiences are transformed. The findings from this study have provided evidence that the course developed for nursing students, underpinned by an appropriate framework, does improve academic numeracy. More specifically, students improved their content knowledge of and confidence in mathematics in areas that were directly related to their degree. The study used Valsiner’s microgenetic approach to development to trace the course as it was being taught and two students’ personal academic numeracy journeys. It highlighted particularly troublesome concepts, then outlined scaffolding and pathways used to develop understanding. This approach to academic numeracy development was summarised into a four-faceted model at the university, program, course and individual level. This model can be applied successfully to similar contexts. Thus the thesis advances both theory and practice in this under-researched and under-theorised area.

Dichotomy in the design studio : adapting to new blended learning environments

In a study aimed at better understanding how staff and students adapt to new blended studio learning environments (BSLE’s), a group of 165 second year architecture students at a large school of architecture in Australia were separated into two different design studio learning environments. 70% of students were allocated to a traditional studio design learning environment (TSLE) and 30% to a new, high technology embedded, prototype digital learning laboratory. The digital learning laboratory was purpose designed for the case-study users, adapted Student-Centred Active Learning Environment for Undergraduate Programs (SCALE-UP) principles, and built as part of a larger university research project. The architecture students attended the same lectures, followed the same studio curriculum and completed the same pieces of assessment; the only major differences were the teaching staff and physical environment within which the studios were conducted. At the end of the semester, the staff and students were asked to complete a questionnaire about their experiences and preferences within the two respective learning environments. Following this, participants were invited to participate in focus groups, where a synergistic approach was effected. Using a dual method qualitative approach, the questionnaire and survey data were coded and extrapolated using both thematic analysis and grounded theory methodology. The results from these two different approaches were compared, contrasted and finally merged, to reveal six distinct emerging themes, which were instrumental in offering resistance or influencing adaptation to, the new BLSE. This paper reports on the study, discusses the major contributors to negative resistance and proposes points for consideration, when transitioning from a TSLE to a BLSE.

Spatial/surveying programs repositioning within new STEM Faculty at QUT

Many of the undergraduate and postgraduate programs of the former Faculty of Built Environment and Engineering PLUS Faculty of Sciences and Technology are changing as a result of merging these two large organisations, with some disciplines relocating to faculties of Creative Industries and Health respectively. The new STEM precinct under construction has begun rising from the proverbial hole-in-the-ground. Existing Surveying and Spatial Sciences programs, assets and staff are being repositioned with the newly formed School of Earth, Environment and Biological Sciences.2011. Golden graduates morning tea organised by QUT Alumni. Technology upgrades to the Mapping Sciences lab benefits 3-D learning experiences. Second and third-year students are undertaking Work Integrated Learning (WIL) over the summer vacation period. Final year students recently presented capstone project presentations at mini-conference in the Gibson Rooms overlooking a vibrant Southbank and sparkling Brisbane River. Discussion on end of year graduation ceremony held at QPAC.

A survey on six sigma implementation in Singapore service industries

The concept of Six Sigma was initiated in the 1980s by Motorola. Since then it has been implemented in several manufacturing and service organizations. In case of services, health care and finance were major beneficiaries till now. The application of Six Sigma is gradually picking up in other services like; call centers, utilities and public services. This paper provides empirical evidence on Six Sigma implementation in service industries in Singapore. By using a sample size of 50 service organizations (10 responses are from organizations which have implemented Six Sigma), the paper helps in understanding the status of Six Sigma in service organizations in Singapore. The findings confirm the inclusion of critical success factors, critical to quality characteristics, tools and key performance indicators as observed from the literature. The revelation of “not relevant” as a reason for not implementing Six Sigma shows the need for understanding specific requirements of service organizations before its application.

Design on the future: developing and enacting sustainable living programs in primary schools

Sustainable living is high on the international agenda (Ginsberg & Frame, 2004; Sutton, 2004). If education is fundamental to global transformation towards sustainability, then schools are in strategic positions to facilitate this change. Over recent years, schools in Australia have become more active in encouraging sustainability with the implementation of programs such as Science Education for Sustainable Living (SESL) that focus on topics such as energy efficiency, recycling, enhancing biodiversity, protecting species, and managing resources. This paper reports on a government funded Australian School Innovation in Science, Technology and Mathematics (ASISTM) project titled “Integrating science, technology and mathematics for understanding sustainable living” in which teachers, preservice teachers and other science professionals worked collaboratively to plan and enact a range of SESL programs for primary school students. Participants in this study included: 6 teachers, 5 preservice teachers, 2 university partners, 2 scientists, 4 consultants, and over 250 primary students. The findings from this qualitative study revealed a need for: (1) professional development for understanding SESL, (2) procedures for establishing and implementing SESL, and (3) strategies to devise, implement and evaluate SESL units of work.

Big, bigger, best? The impact of reforms on the not-for-profit sector in Queensland

Organisations within the not-for-profit sector provide services to individuals and groups that government and for-profit organisations cannot or will not consider. The not-for-profit sector has come to be a vibrant and rich agglomeration of services and programs that operate under a myriad of philosophical stances, service orientation, client groupings and operational capacities. In Australia these organisations and services are providing social support and service assistance to many people in the community; often targeting their assistance to the most difficult of clients. Initially, in undertaking this role, the not-for-profit sector received limited sponsorship from government. Over time governments assumed greater responsibility in the form of service grants to particular groups: ‘the worthy poor’. More recently, they have entered into contractual service agreements with the not-for-profit sector, which specify the nature of the outcomes to be achieved and, to a degree, the way in which the services will be provided. A consequence of this growing shift to a more marketised model of service contracting, often offered-up under the label of enhanced collaborative practice, has been increased competitiveness between agencies that had previously worked well together (Keast and Brown, 2006). Another trend emerging from the market approach is the entrance of for-profit providers. These larger organisations have higher levels of organisational capacity with considerable organisational slack to allow them to adopt new service roles. Shaped almost as ‘shadow governments’ they appear to be a strong preference for governments looking for greater accountability of outcomes and an easier way to control the interaction with the conventional not-for-profit sector. The question is will governments’ apparent preference for larger organisational arrangements lead to the demise of the vibrancy of the not-for-profit sector and impact on service provision to those people who fall outside of the remit of the new service providers? To address this issue, this paper uses information gleaned from a state-wide survey of not-for-profit organisations in Queensland, Australia which included organisational size, operational scope, funding arrangements and governance/management approaches. Supplementing this information is qualitative data derived from 17 focus groups and 120 interviews conducted over ten years of study of this sector. The findings contribute to greater understanding of the practice and theory of the future provision of social services.

Stepwise refinement of interrupt-driven real-time programs

Embedded real-time programs rely on external interrupts to respond to events in their physical environment in a timely fashion. Formal program verification theories, such as the refinement calculus, are intended for development of sequential, block-structured code and do not allow for asynchronous control constructs such as interrupt service routines. In this article we extend the refinement calculus to support formal development of interrupt-dependent programs. To do this we: use a timed semantics, to support reasoning about the occurrence of interrupts within bounded time intervals; introduce a restricted form of concurrency, to model composition of interrupt service routines with the main program they may preempt; introduce a semantics for shared variables, to model contention for variables accessed by both interrupt service routines and the main program; and use real-time scheduling theory to discharge timing requirements on interruptible program code.

Influences on student learning in engineering : some results from case study fieldwork

This paper closely examines factors affecting students’ progression in their engineering programs through fieldwork conducted at three Australian universities. To extract clues on how specific teaching methods can be used to maximize learning, the investigation considered factors such as understanding how students take in, process and present information. A number of focus groups were conducted with students and the data gathered was combined with survey results of students’ and academics’ learning styles. The paper reports on the process followed, and provides some analysis of the gathered data, as part of an Australian Learning and Teaching Council, ALTC, Associate Fellowship program.

Convenience, loyal, and customising users : a survey of the behaviours and intentions of young online news users in Australia

The implications of the shift to online news consumption for journalism cultures and practices have attracted considerable scholarly attention and public debate. Less well considered are the implications of online news consumption for and by young people. This paper reports on research into the behaviours and intentions of online news consumers, 18-30 years of age, to propose three distinctive types of user (convenience, loyal and customising). Also opened up for discussion are questions about the strategic value to commercial news organisations of audience-centred empirical research that seeks to respond the crisis of professional journalism.

Communities of practice : building organisational capability through an undergraduate assurance of learning program

This study explores academic perceptions of organizational capability and culture following a project to develop a quality assurance of learning program in a business school. In the project a community of practice structure was established to include academics in the development of an embedded, direct assurance of learning program affecting more than 5000 undergraduate students and 250 academics from nine different disciplines across four discipline based departments. The primary outcome from the newly developed and implemented assurance of learning program was the five year accreditation of the business school’s programs by two international accrediting bodies, EQUIS and AACSB. This study explores a different outcome, namely perceptions of organizational culture and individual capabilities as academics worked together in teaching teams and communities. This study uses a survey and interviews with academics involved, through a retrospective panel design consisting of an experimental group and a control group. Results offer insights into communities of practice as a means of encouraging new individual and organizational capability and strategic culture adaptation.