An analysis of Generalized Symmetrical Components in non sinusoidal three phase systems

This paper presents the study of the so called Generalized Symmetrical Components, proposed by Tenti et. al. to the analysis of unbalanced periodic non sinusoidal three phase systems. As a result, it was possible to establish a proper relationship between such of generalized symmetrical components and Fortescue symmetrical components to the harmonic frequencies that compose a generic periodic non sinusoidal three phase system. © 2011 IEEE.

Sensory profile and preference mapping of orange cakes with addition of prebiotics inulin and oligofructose

Orange cakes with addition of inulin and oligofructose to justify a prebiotic claim (minimum of 3 g of fructans in a 60 g serving of cake) were investigated regarding sensory aspects. The sensory profile of cakes with inulin, with inulin/oligofructose and without prebiotics (standard cake) was evaluated using descriptive quantitative analysis. Preference mapping was assessed using multidimensional scaling on data obtained through an acceptability test with a nine-point hedonic scale. The cakes with prebiotics presented greater crust brownness, dough beigeness, hardness and stickiness than the standard cake and lower crumbliness. Principal Component Analysis (69.5 and 10.7% of explanation to the first and second principal components, respectively) showed that crust brownness, dough beigeness, hardness and stickiness contributed to distinguish the cakes with prebiotics from standard cakes. The sensory acceptability was similar for the three cakes and higher when compared to three commercial cakes, but the preference mapping showed that cakes with prebiotics were preferred to commercial cakes. Addition of prebiotics in orange cakes is feasible, based on the sensory results, which may facilitate marketing of this functional food with sensorial qualities equivalent to conventional products. © 2012 Elsevier Ltd.

Genetic parameters for test-day milk yield, 305-day milk yield, and lactation length in Guzerat cows

Milk production in tropical environments requires the use of crossbreeding systems including breeds well adapted to harsh conditions, but with lower productivities when compared to specialized breeds. Besides the genetic improvement for milk production, lactation lengths also need to be studied for most of these breeds. Accordingly, genetic parameters were estimated for 305-day cumulative milk yield (MY305), test-day milk yield (TDMY), and lactation length (LL) using information from the first lactations of 2816 Guzerat cows selected for milk production in 28 herds in Brazil. Contemporary groups were defined as herd, year and season of the test for TDMY, and as herd, year and season of calving for MY305 and LL. Variance components were estimated with the restricted maximum likelihood method under a multi-trait animal model. Heritabilities estimated for TDMY ranged from 0.16 to 0.24, and were 0.24 and 0.12 for MY305 and LL, respectively. Genetic correlations were high and positive, ranging from 0.51 to 0.99 among TDMY records, from 0.81 to 0.98 between each TDMY and MY305, and from 0.71 to 0.94 between each TDMY and LL. Genetic parameters obtained in this study indicated the possibility of using test-day records for the prediction of breeding values for milk yield in this population of the Guzerat breed. The use of TDMY as selection criteria would result in indirect gains in MY305 and LL. However, the highest response to selection for MY305 would be obtained by direct selection for this trait. © 2012 Elsevier B.V.

Grip and load force coordination in cyclical isometric manipulation task is not affected by the feedback type

Background: The relationship between normal and tangential force components (grip force - GF and load force - LF, respectively) acting on the digits-object interface during object manipulation reveals neural mechanisms involved in movement control. Here, we examined whether the feedback type provided to the participants during exertion of LF would influence GF-LF coordination and task performance. Methods. Sixteen young (24.7 ±3.8 years-old) volunteers isometrically exerted continuously sinusoidal FZ (vertical component of LF) by pulling a fixed instrumented handle up and relaxing under two feedback conditions: targeting and tracking. In targeting condition, FZ exertion range was determined by horizontal lines representing the upper (10 N) and lower (1 N) targets, with frequency (0.77 or 1.53 Hz) dictated by a metronome. In tracking condition, a sinusoidal template set at similar frequencies and range was presented and should be superposed by the participants' exerted FZ. Task performance was assessed by absolute errors at peaks (AEPeak) and valleys (AEValley) and GF-LF coordination by GF-LF ratios, maximum cross-correlation coefficients (r max), and time lags. Results: The results revealed no effect of feedback and no feedback by frequency interaction on any variable. AE Peak and GF-LF ratio were higher and rmax lower at 1.53 Hz than at 0.77 Hz. Conclusion: These findings indicate that the type of feedback does not influence task performance and GF-LF coordination. Therefore, we recommend the use of tracking tasks when assessing GF-LF coordination during isometric LF exertion in externally fixed instrumented handles because they are easier to understand and provide additional indices (e.g., RMSE) of voluntary force control. © 2013 Pedão et al.; licensee BioMed Central Ltd.

Comparison of different designs of implant-retained overdentures and fixed full-arch implant-supported prosthesis on stress distribution in edentulous mandible - A computed tomography-based three-dimensional finite element analysis

A finite element analysis was used to compare the effect of different designs of implant-retained overdentures and fixed full-arch implant-supported prosthesis on stress distribution in edentulous mandible. Four models of an human mandible were constructed. In the OR (O'ring) group, the mandible was restored with an overdenture retained by four unsplinted implants with O'ring attachment; in the BC (bar-clip) -C and BC groups, the mandibles were restored with overdentures retained by four splinted implants with bar-clip anchor associated or not with two distally placed cantilevers, respectively; in the FD (fixed denture) group, the mandible was restored with a fixed full-arch four-implant-supported prosthesis. Models were supported by the masticatory muscles and temporomandibular joints. A 100-N oblique load was applied on the left first molar. Von Mises (σvM), maximum (σmax) and minimum (σmin) principal stresses (in MPa) analyses were obtained. BC-C group exhibited the highest stress values (σvM=398.8, σmax=580.5 and σmin=-455.2) while FD group showed the lowest one (σvM=128.9, σmax=185.9 and σmin=-172.1). Within overdenture groups, the use of unsplinted implants reduced the stress level in the implant/prosthetic components (59.4% for σvM, 66.2% for σmax and 57.7% for σmin versus BC-C group) and supporting tissues (maximum stress reduction of 72% and 79.5% for σmax, and 15.7% and 85.7% for σmin on the cortical and trabecular bones, respectively). Cortical bone exhibited greater stress concentration than the trabecular bone for all groups. The use of fixed implant dentures and removable dentures retained by unsplinted implants to rehabilitate edentulous mandible reduced the stresses in the periimplant bone tissue, mucosa and implant/prosthetic components. © 2013 Elsevier Ltd.

Validity and feasibility of qualitative behavior assessment for the evaluation of Nellore cattle temperament

The aims of this study were to assess the validity and the feasibility of the qualitative behavior assessment (QBA) method as indicator of Nellore cattle temperament under field conditions, evaluating its associations with four other traditional methods and weight gain. The temperament and live weight of 2229 Nellore cattle was assessed at approximately 550 days of age. Five measurements of cattle temperament were recorded: flight speed test (FS, in m/s), visual scores of movement in the crush (MOV), crush score (CS), temperament score (TS), and the qualitative behavior assessment method (QBA), by using a list of 12 behavioral based adjectives as descriptors of temperament. Average daily weight gain (ADG) was calculated for each animal. For statistical analysis of QBA data, the Principal Component Analysis was used. A temperament index (TI) was defined for each animal using the scores for the first principal component. Pearson's correlation coefficients were estimated between TI with FS and ADG. A mixed model ANOVA was used to analyze the TI variation as a function of TS, CS, and MOV. The score plot for the first and second principal components was used to classify the cattle in four groups (from very bad to very good temperament). The first principal component explained 49.50% of the variation in the data set, with higher positive loadings for the adjectives 'agitated' and 'active', and higher negative loadings for 'calm' and 'relaxed'. TI was significantly correlated with FS (r=0.49; P<0.01) and ADG (r=-0.10; P<0.01). The means of ADG, FS, and the temperament scores (CS, TS, MOV) differed significantly (P<0.01) among the four groups, from very bad to very good temperament. The QBA method could discriminate different behavioral profiles of Nellore cattle and were in agreement with other traditional methods used as indicators of cattle temperament. Additional studies are needed to assess the inter- and intra-observers reliability and to study its association with physiological parameters. © 2013 Elsevier B.V.

Towards an integrative approach to sustainability: exploring potential synergies between gender and environment

Includes bibliography.

Four year multitrophic food web: source food web description, methodology accuracy and species diversity

Food webs have been used in order to understand the trophic relationship among organisms within an ecosystem, however the extension by which sampling efficiency could affect food web responses remain poorly understood. Still, there is a lack of long-term sampling data for many insect groups, mainly related to the interactions between herbivores and their host plants. In the first chapter, I describe a source food web based on the Senegalia tenuifolia plant by identifying the associated insect species and the interactions among them and with this host plant. Furthermore, I check for the data robustness from each trophic level and propose a cost-efficiently methodology. The results from this chapter show that the collected dataset and the methodology presented are a good tool for sample most insect richness of a source food web. In total the food web comprises 27 species belonging to four trophic levels. In the second chapter, I demonstrate the temporal variation in the species richness and abundance from each trophic level, as well as the relationship among distinct trophic levels. Moreover, I investigate the diversity patterns of the second and third trophic level by assessing the contribution of alfa and beta-diversity components along the years. This chapter shows that in our system the parasitoid abundance is regulated by the herbivore abundances. Besides, the species richness and abundances of the trophic levels vary temporally. It also shows that alfa-diversity was the diversity component that most contribute to the herbivore species diversity (2nd trophic level), while the contribution of alfa- and beta-diversity changed along the years for parasitoid diversity (3rd level). Overall, this dissertation describes a source food web and bring insights into some food web challenges related to the sampling effort to gather enough species from all trophic levels. It also discuss the relation among communities associated with distinct trophic levels and their temporal variation and diversity patterns. Finally, this dissertation contributes for the world food web database and in understanding the interactions among its trophic levels and each trophic level pattern along time and space

Delimitação e alinhamento de conceitos lexicalizados no inglês norte-americano e no português brasileiro

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Impacto da dinâmica da demanda dos frutos de açaí nas relações socioeconômicas e composição florística no estuário amazõnico

Nos últimas décadas a demanda pelo açaí no estado do Pará cresceu gradualmente, já que a produção e mercado da fruta de açaí são a base da economia de mais de 20 municípios paraenses. A prática do extrativismo do açaizeiro é praticada pelos homens, mulheres e crianças, voltada para autoconsumo e para a comercialização. Devido a este fato, a dinâmica do extrativismo do açaizeiro começou a mudar pelo aumento da demanda do açaí para o mercado, principalmente pelo valor de importância e interesse econômico. O presente trabalho teve como objetivo avaliar os impactos das mudanças da demanda dos frutos de açaí na (i) relação econômica da renda do açaí e na (ii) densidade e composição florística das áreas agroflorestais manejadas pelos ribeirinhos. O estudo realizou-se na comunidade São João Batista, município de Abaetetuba, Pará - Brasil. A população tem como principal fonte de trabalho a extração do fruto de açaí. Foram feitas entrevistas semi-estruturadas e abertas às famílias residentes na comunidade considerados pequenos e médios produtores de açaí. As entrevistas abarcaram dois componentes, o aspecto econômico e o aspecto social. Além disso, coletaram-se dados diários sobre a quantidade de rasa de açaí coletada, consumida e vendida, e o preço de cada rasa, com a finalidade de caracterizar a produção e preço nas diferentes temporadas da safra. Também se realizou o levantamento florístico mediante um inventário com a finalidade de caracterizar a vegetação, avaliar a densidade e composição florística dos açaizeiros. Para isso estabeleceu-se um total de 10 parcelas de 20 x 50 m (1000 m² ou 0.1 ha) distribuídas em cinco propriedades selecionadas, medindo o diâmetro de todos os indivíduos adultos > 10 cm de DAP (diâmetro à altura do peito) e para palmeiras com DAP > 2 cm e estimou-se a altura total (H) de cada individuo da base até o ponto mais alto das folhas. A análise da diversidade dos açaizais utilizou-se o índice de Shannon-Wiener e o índice de Simpson através do programa estatístico PAST – PAlaentologicalSTatistics, ver. 1,27. Como principais resultados obtiveram-se que na comunidade de São João Batista, a venda da produção de açaí é realizada para intermediários (marreteiros) (55%), no mercado de Abaetetuba (29%), no mercado de Belém (10%) e para marreteiro e/ou no mercado de Abaetetuba (6%). O município de Abaetetuba desde o ano 2005 teve uma queda na produção extrativa passando de 10.500 t (2004) a 900 t (2005) e progressivamente diminuindo até 770 t (2008). A quantidade da produção de açaí cultivada aumentou de 15.625 t (2003) a 131.250 t (2008) representando 99,4% da produção total. Na comunidade, foi inventariado 1043 indivíduos de árvores com um total de 11 famílias e 28 espécies, ocupando áreas basais maiores as famílias Arecaceae (8.83) e Fabaceae (6.77) e com maiores números de indivíduos (831 e 147 respectivamente). As espécies com maiores índices de valor de importância (IVIs) e de densidade registraram-se a Euterpe oleracea (777 indivíduos), Pterocarpus sp. (126) e Mauritia flexuosa (50). Obtiveram-se valores baixos nos índices de Simpson: 0.4275 e Shannon: 1.071, o que indica que se tem uma baixa diversidade resultante da atividade de manejo e extração de palmito e frutos de açaí levando a uma monocultura para o consumo e venda dos frutos. Concluindo, que o aumento do preço é forçado pelo crescimento da demanda, provocando a ampliação das áreas de cultivo e plantio de açaí para o aumento da produção. O impacto socioeconômico do manejo e cultivo dos açaizais sobre a economia ribeirinha e a economia extrativa do estuário amazônico gera grandes oportunidades de emprego, renda e qualidade de vida para as populações das várzeas e dos centros urbanos, sobretudo favorecendo aos mais pobres.

Adhesive systems: important aspects related to their composition and clinical use

This literature review article addresses the types and the main components of different etch-and-rinse and self-etch adhesive systems available in the market, and relates them to their function, possible chemical interactions and influence of handling characteristics. Scanning electron microscopy (SEM) images are presented to characterize the interface between adhesives and dentin. Adhesive systems have been recently classifed according to their adhesion approaches in etch-and-rinse, self-etch and glass ionomer. The etch-and-rinse systems require a specifc acid-etch procedure and may be performed in two or three steps. Self-etch systems employ acidic monomers that demineralize and impregnate dental substrates almost at the same time. These systems are separated in one or two steps. Some advantages and defciencies were noted for etch-and-rinse and self-etch approaches, mainly for the simplifed ones due to some chemical associations and interactions. The SEM micrographs illustrate different relationships between adhesive systems and dental structures, particularly dentin. The knowledge of composition, characteristics and mechanisms of adhesion of each adhesive system is of fundamental importance to permit the adoption of ideal bonding strategies under clinical conditions.

Vitamin D Induces Increased Systolic Arterial Pressure via Vascular Reactivity and Mechanical Properties

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Urethral striated muscle and extracellular matrix morphological characteristics among mildly diabetic pregnant rats: translational approach

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Sensory profile and acceptability of traditional and double-distilled cachaca aged in oak casks

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Leishmanicidal activity of Brosimum glaziovii (Moraceae) and chemical composition of the bioactive fractions by using high-resolution gas chromatography and GC-MS

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)