Estudo da viabilidade do uso do pó de aciaria elétrica a arco na confecção de blocos de concreto para pavimentação

o Pó de Aciaria Elétrica (PAE) é um resíduo gerado em indústrias siderúrgicas que utilizam o Forno Elétrico a Arco (FEA) e a sucata como principal matéria-prima para a produção do aço. O PAE é composto por diferentes óxidos metálicos, entre eles o Zn, Cr, Pb e Cd. Devido às concentrações de Pb e Cdultrapassarem as pennitidas pela NBR 10004(1987), no ensaio de lixiviação, o PAE é classificado como resíduo perigoso Classe I. Este trabalho tem como objetivo o estudo da influência do PAEno desempenhomecânico e durabilidade de blocos de concreto para pavimentação. O programa experimental foi desenvolvido em duas etapas: a primeira. na qual foi fixada a relação água/cimento e a segunda, na qual foi fixado o índice de umidade, fator este relacionado com a capacidade de moldar os corpos-de-prova. Em ambas as etapas, o teor de adição do PAE empregado foi de 5%, 15% e 25% em relação à massa de cimento. Também foram moldados corpos-de-prova sem adição do resíduo (0%), utilizados como referência. Como ensaios complementares, foram detenninados o calor de hidratação, assim como a caracterização mineralógica e microestrutural de pastas de cimento com teores do PAE. Verificou-se que, nas duas etapas, os blocos contendo 15% de adição do PAE obtiveram melhor desempenho quanto à resistência à compressão axial. Para os ensaios de durabilidade, os blocos com o PAE mostraram-se com desempenho igual ou superior aos blocos que não o possuíam O PAE utilizado nos blocos de concreto, bem como em pastas de cimento, retardou os tempos de início e fim de pega. O cimento também pode agir como formador de uma matriz para encapsular os metais pesados contidos no pó de aciaria. Nos ensaios de caracterização ambiental, obselVou-seeste encapsulamento através da análise dos extratos lixiviados e solubilizados, onde as concentrações dos metais pesados, ao longo do tempo, diminuíram. Isto fez com que os blocos, contendo o resíduo em sua composição, fossem classificados neste trabalho como Classe II - não-inerte. Desta forma, a partir de um resíduo perigoso Classe L foi possível desenvolver, através do encapsulamento na matriz cimentante, um produto Classe 11.

Análise bibliométrica da produção científica brasileira de RH na década de 1990 - um mapeamento a partir das citações dos artigos publicados no ENANPAD

Neste artigo, é usada análise bibliométrica para entender a influência de autores e instituições na produção acadêmica em Recursos Humanos no Brasil na década de 90, bem como para mapear o comportamento de auto-citações e citações à própria instituição dos autores que produziram no período. O estudo levantou, nos 290 artigos de RH publicados na década de 90 (1991 a 2000) nos anais do Enanpad, a constituição, origem e padrão de interrelação de todas as citações, autores e instituições que publicaram e foram citados na área. No total, analisaram-se os padrões bibliométricos de 5814 citações, que compreendiam 342 autores, advindos de 51 instituições. Os resultados mostram uma área com alto índice de auto-citação e endogenia, e com uma elevada incidência de citação de jornais, revistas e autores estrangeiros e não acadêmicos; revelam também que Maria Tereza Fleury (FEA/USP) foi a acadêmica mais citada; que a USP, UFMG, UFRGS e a FGV-EAESP (nessa ordem) são as instituições com os autores mais citados; que a RAE é o veículo nacional mais referenciado no campo; e que alguns autores e instituições que publicaram no período têm elevada propensão à auto-citação e à consulta predominante a autores de sua própria instituição. O artigo termina oferecendo ao campo sugestões para desenvolvimento e debate, a partir dos seus resultados e sua comparação com trabalhos anteriores analisando a mesma base amostral.

Caracterização para o beneficiamento gravimétrico de escória de aço inoxidável com a utilização de concentrador Mozley laboratorial

A formação de escória representa uma das maiores fontes de geração de resíduos na produção de aços inoxidáveis. Ao contrário da escória oriunda de alto-forno, as quais são amplamente estudadas e reutilizadas, a escória de aço inoxidável oriunda do processo FEA (forno elétrico a arco) é objeto de poucos estudos visando a recuperação dos materiais de valor presentes neste resíduo. Este resíduo é normalmente disposto, em grandes áreas, sem tratamento prévio. Esta prática pode representar um perigo à saúde humana devido aos materiais constituintes da escória, como metais tóxicos como, por exemplo, o cromo. Apesar disto, poucas tentativas de eliminar estes contaminantes têm sido feitas. Porém, é possível tratar este resíduo de forma a extrair os metais de valor agregado, como no caso do cromo. Sob um aspecto econômico, processos gravimétricos podem ser aplicáveis a estes tipos de resíduos. Sendo este o objetivo deste trabalho, é mostrado que, com a utilização de um separador mineral laboratorial Mozley, foi possível obter um concentrado contendo cromo, o qual pode ser tratado adequadamente para ser reutilizado, por exemplo, no processo de fabricação de aço.

O paradigma tecnológico e a revolução informacional: fundamentos da sociedade da informação

REGIS, Josiana Florencio Vieira; CAMPOS, Ana Celia Cavalcanti Fernandes. O paradigma tecnologico e a revoluçao informacional: fundamentos da sociedade da informaçao. In: CONGRESSO INTERNACIONAL EM SISTEMAS DE INFORMAÇAO E GESTAO DA TECNOLOGIA, 6., 2009. Sao Paulo. Anais eletronicos... Sao Paulo: FEA/USP, 2009. Trabalho oral.

Clássicos versus Keynes: a abordagem formal de David Champernowne

Este texto tem por objetivo ressaltar um aspecto que não tem sido tratado com a devida profundidade na literatura que estuda a formalização da Teoria Geral do Emprego, dos Juros e da Moeda de John Maynard Keynes (1936). Mais precisamente, o texto destaca a estratégia de formalização adotada por David G. Champernowne em seu artigo intitulado Unemployment, Basic and Monetary: the classical analysis and the keynesian, publicado em 1935-36 na Review of Economic Studies. Chamamos a atenção para o fato dele distinguir a teoria clássica da teoria de Keynes não apenas pelos pressupostos adotados por cada teoria, mas principalmente pela construção de subsistemas a partir de um sistema geral, com características recursivas (relações de causalidade) distintas. As explicações em prosa, a descrição algébrica das funções comportamentais e condições de equilíbrio e a ilustração por meio de diagramas, além da escolha de conjuntos específicos de variáveis para representar cada uma das teorias e suas diferentes versões são aspectos deste artigo de Champernowne que merecem uma análise mais minuciosa.

RINEX_HO: second- and third-order ionospheric corrections for RINEX observation files

When GNSS receivers capable of collecting dual-frequency data are available, it is possible to eliminate the first-order ionospheric effect in the data processing through the ionosphere-free linear combination. However, the second- and third-order ionospheric effects still remain. The first-, second- and third-order ionospheric effects are directly proportional to the total electron content (TEC), although the second- and third-order effects are influenced, respectively, by the geomagnetic field and the maximum electron density. In recent years, the international scientific community has given more attention to these kinds of effects and some works have shown that for high precision GNSS positioning these effects have to be taken into consideration. We present a software tool called RINEX_HO that was developed to correct GPS observables for second- and third-order ionosphere effects. RINEX_HO requires as input a RINEX observation file, then computes the second- and third-order ionospheric effects, and applies the corrections to the original GPS observables, creating a corrected RINEX file. The mathematical models implemented to compute these effects are presented, as well as the transformations involving the earth's magnetic field. The use of TEC from global ionospheric maps and TEC calculated from raw pseudorange measurements or pseudoranges smoothed by phase is also investigated.

Projections Onto Convex Sets through Particle Swarm Optimization and its application for remote sensing image restoration

Image restoration attempts to enhance images corrupted by noise and blurring effects. Iterative approaches can better control the restoration algorithm in order to find a compromise of restoring high details in smoothed regions without increasing the noise. Techniques based on Projections Onto Convex Sets (POCS) have been extensively used in the context of image restoration by projecting the solution onto hyperspaces until some convergence criteria be reached. It is expected that an enhanced image can be obtained at the final of an unknown number of projections. The number of convex sets and its combinations allow designing several image restoration algorithms based on POCS. Here, we address two convex sets: Row-Action Projections (RAP) and Limited Amplitude (LA). Although RAP and LA have already been used in image restoration domain, the former has a relaxation parameter (A) that strongly depends on the characteristics of the image that will be restored, i.e., wrong values of A can lead to poorly restoration results. In this paper, we proposed a hybrid Particle Swarm Optimization (PS0)-POCS image restoration algorithm, in which the A value is obtained by PSO to be further used to restore images by POCS approach. Results showed that the proposed PSO-based restoration algorithm outperformed the widely used Wiener and Richardson-Lucy image restoration algorithms. (C) 2010 Elsevier B.V. All rights reserved.

Sistemas de dunas do parque das Dunas e Barreiras do Inferno/Natal (RN: levantamento geológico /geofísico, elaboração do modelo deterministico e avaliação da vulnerabilidade/suscetibilidade

The current work was developed on the dune systems of the Parque das Dunas and Barreira do Inferno. These places are located in the cities of Natal and Parnamirim (RN, Brazil), respectively. This project has the purpose of developing the deterministic model on a specific blowout at Parque das Dunas, based in the geophysical interpretations of the lines gotten with the Ground Penetration Radar and the planialtimetric acquisitions of the topographical surface of the land. Also analyses of the vulnerability/susceptibility of these dune systems had been done in relation to the human pressures. To develop its deterministic model, it is necessary to acquire inner and outer geometries of the cited blowout. In order to depict inner geometries underneath the surface are used the GPR observing the altimetric control for topographical correction of the GPR lines. As for the outer geometries, the geodesic GPS gives us the planialtimetric points (x, y and z points) with milimetric precision, resulting in high-resolution surfaces. Using interpolation methods of the planialtimetric points was possible create Digital Elevations Models (DEM´s) of these surfaces. As a result, 1,161.4 meters of GPR lines were acquired on the blowout at the Parque das Dunas and 3,735.27 meters on the blowout at the Barreira do Inferno. These lines had been acquired with a 200 MHz antenna, except the 7 and 8 lines, for which we had been used a 100 MHz antenna. The gotten data had been processed and interpreted, being possible to identify boundary surfaces of first, second and third order. The first order boundary surface is related with the contact of the rocks of the Barreiras Group with the aeolian deposits. These deposits had been divided in two groups (Group 1 and Group 2) which are related with the geometry of stratum and the dip of its stratifications. Group 1 presented stratum of sigmoidal and irregular geometries and involved bodies where the reflectors had presented dips that had varied of 20 to the 28 degrees for the Parque das Dunas blowout and of 22 to the 29 degrees for the Barreira do Inferno blowout. Usually, it was limited in the base for the first order surface and in the top for the second order surface. Group 2 presented stratum of trough, wedge or lens geometries, limited in the base for the second order vi surface, where the corresponding deposits had more shown smoothed reflectors or with dips of low angle. The Deterministic and Digital Elevation Models had been developed from the integration and interpretation of the 2D data with the GOCAD® program. In Digital Elevations Models it was possible to see, for the localities, corridor or trough-shaped blowouts. In Deterministic Model it was possible to see first and second order boundary surfaces. For the vulnerability/susceptibility of the dune systems it was applied the methodology proposal by Boderè al (1991); however the same one did not show adequate because it evaluates actual coastal dunes. Actual coastal dunes are dunes that are presented in balance with the current environmental conditions. Therefore, a new methodology was proposal which characterizes the supplying and activity sedimentary, as well as the human pressures. For the methodology developed in this work, both the localities had presented a good management. The Parque das Dunas was characterized as a relic dune system and the Barreira do Inferno was characterized as a palimpsestic dune system. Also two Thematic Maps had been elaborated for the environmental characterization of the studied dune systems, with software ArcGis 8.3, and its respective data bases

Semen cryopreservation protocols of Mangalarga Marchador stallions

The effect of the utilization of three semen protocols (Inra 82®, Merck Gema and Botu-crio®) and two filling techniques (0.25 and 0.50 mL straws) in Mangalarga Marchador stallions were studied in this experiment. Sperm parameters were assessed during processing and post-freezing. No interactions between the protocols and type of filling were observed, so they were assessed separately. Sperm parameters were not altered when the extender was added to the centrifugation; however, there was reduction of motility and strength when freezing extenders were added. The Botu-crio® protocol preserved the parameters of total and progressive sperm motility, smoothed path velocity (µm/s), straight line velocity (µm/s), track velocity (µm/s) and the average and fast spermatozoa percentage better than the others. No difference between the extenders for the percentage of sperm integrity was observed. There was no difference in the responses studied on the filling techniques. The stallions presented better freezing with the use of the Botu-crio® protocol. The best post-freezing viability results were found for semen frozen using the Botu-crio® protocol and there were no differences concerning the sperm quality comparing 0.25 and 0.50 mL straws.

Etch and rinse versus self-etching adhesives systems: Tridimensional micromechanical analysis of dentin/adhesive interface

The purpose of this study was to evaluate stress distribution in the hybrid layer produced by two adhesive systems using three-dimensional finite element analysis (FEA). Four FEA models (M) were developed: Mc, a representation of a dentin specimen (41 x 41 x 82 mu m) restored with composite resin, exhibiting the adhesive layer, hybrid layer (HL), resin tags, peritubular dentin, and intertubular dentin to simulate the etch-and-rinse adhesive system; Mr, similar to Mc, with lateral branches of the adhesive; Ma, similar to Mc, however without resin tags and obliterated tubule orifice, to simulate the environment for the self-etching adhesive system; Mat, similar to Ma, with tags. A numerical simulation was performed to obtain the maximum principal stress (sigma(max)). The highest sigma(max) in the HL was observed for the etch-and-rinse adhesive system. The lateral branches increased the sigma(max) in the HL. The resin tags had a little influence on stress distribution with the self-etching system. (C) 2012 Elsevier Ltd. All rights reserved.

Platform Switching: Biomechanical Evaluation Using Three-Dimensional Finite Element Analysis

Purpose: The objective of this study was to evaluate, using three-dimensional finite element analysis (3D FEA), the stress distribution in peri-implant bone tissue, implants, and prosthetic components of implant-supported single crowns with the use of the platform-switching concept. Materials and Methods: Three 3D finite element models were created to replicate an external-hexagonal implant system with peri-implant bone tissue in which three different implant-abutment configurations were represented. In the regular platform (RP) group, a regular 4.1-mm-diameter abutment (UCLA) was connected to regular 4.1-mm-diameter implant. The platform-switching (PS) group was simulated by the connection of a wide implant (5.0 mm diameter) to a regular 4.1-mm-diameter UCLA abutment. In the wide-platform (WP) group, a 5.0-mm-diameter UCLA abutment was connected to a 5.0-mm-diameter implant. An occlusal load of 100 N was applied either axially or obliquely on the models using ANSYS software. Results: Both the increase in implant diameter and the use of platform switching played roles in stress reduction. The PS group presented lower stress values than the RP and WP groups for bone and implant. In the peri-implant area, cortical bone exhibited a higher stress concentration than the trabecular bone in all models and both loading situations. Under oblique loading, higher intensity and greater distribution of stress were observed than under axial loading. Platform switching reduced von Mises (17.5% and 9.3% for axial and oblique loads, respectively), minimum (compressive) (19.4% for axial load and 21.9% for oblique load), and maximum (tensile) principal stress values (46.6% for axial load and 26.7% for oblique load) in the peri-implant bone tissue. Conclusion: Platform switching led to improved biomechanical stress distribution in peri-implant bone tissue. Oblique loads resulted in higher stress concentrations than axial loads for all models. Wide-diameter implants had a large influence in reducing stress values in the implant system. INT J ORAL MAXILLOFAC IMPLANTS 2011;26:482-491

Cortical Bone Stress Distribution in Mandibles with Different Configurations Restored with Prefabricated Bar-Prosthesis Protocol: A Three-Dimensional Finite-Element Analysis

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Periodontal ligament influence on the stress distribution in a removable partial denture supported by implant: a finite element analysis

Objective: The non-homogenous aspect of periodontal ligament (PDL) has been examined using finite element analysis (FEA) to better simulate PDL behavior. The aim of this study was to assess, by 2-D FEA, the influence of non-homogenous PDL on the stress distribution when the free-end saddle removable partial denture (RPD) is partially supported by an osseointegrated implant. Material and Methods: Six finite element (FE) models of a partially edentulous mandible were created to represent two types of PDL (non-homogenous and homogenous) and two types of RPD (conventional RPD, supported by tooth and fibromucosa; and modified RPD, supported by tooth and implant [10.00x3.75 mm]). Two additional FE models without RPD were used as control models. The non-homogenous PDL was modeled using beam elements to simulate the crest, horizontal, oblique and apical fibers. The load (50 N) was applied in each cusp simultaneously. Regarding boundary conditions the border of alveolar ridge was fixed along the x axis. The FE software (Ansys 10.0) was used to compute the stress fields, and the von Mises stress criterion (sigma vM) was applied to analyze the results. Results: The peak of sigma vM in non-homogenous PDL was higher than that for the homogenous condition. The benefits of implants were enhanced for the non-homogenous PDL condition, with drastic sigma vM reduction on the posterior half of the alveolar ridge. The implant did not reduce the stress on the support tooth for both PDL conditions. Conclusion: The PDL modeled in the non-homogeneous form increased the benefits of the osseointegrated implant in comparison with the homogeneous condition. Using the non-homogenous PDL, the presence of osseointegrated implant did not reduce the stress on the supporting tooth.

EFFECT of METAL PRIMERS on BOND STRENGTH of RESIN CEMENTS TO BASE METALS

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

The effect of ionic strength on the structural organization of dioctadecyldimethylammonium bromide in aqueous solution

High-curvature and stabilized vesicles of dioctadecyldimethylammonium bromide (DODABr) can be formed spontaneously in aqueous electrolytic solution. It is shown by cryo-transmission electron microscopy that 5.0 mM DODABr molecules associate in water at a temperature above its gel-to-liquid-crystalline phase transition temperature (T(m)approximate to45 degreesC) in a variety of complex bilayer structures. However, in the presence of NaCl the preferred structures formed are unilamellar and bilamellar vesicles with high curvature and the dispersion is polydisperse in size and geometry, but the main vesicle population contains spherical, flattened and smoothed structures. It is, however, less polydisperse than the corresponding salt-free dispersion, and the size polydispersity and the vesicle curvature radius tend to decrease with NaCl concentration. Long cylindrical bilamellar vesicles, with a very thin water layer separating the bilayers are also formed in the presence of 10 mM NaCl. The effect of the ionic strength on T-m, obtained by differential scanning calorimetry, is shown to depend on the nature of the counterion: Br- decreases, whereas Cl- increases Tm of DODABr, indicating different affinity of these counterions for the vesicle surfaces.