Toxoplasma-IgM and IgG-avidity in single samples from areas with a high infection rate can determine the risk of mother-to-child transmission

Anti-Toxoplasma IgG-avidity was determined in 168 serum samples from IgG- and IgM-positive pregnant women at various times during pregnancy, in order to evaluate the predictive value for risk of mother-to-child transmission in a single sample, taking the limitations of conventional serology into account. The neonatal IgM was considered the serologic marker of transmission. Fluorometric tests for IgG, IgM (immunocapture) and IgG-avidity were performed. Fifty-one of the 128 pregnant women tested gave birth in the hospital and neonatal IgM was obtained. The results showed 32 (62.75%) pregnant women having high avidity, IgM indexes between 0.6 and 2.4, and no infected newborn. Nineteen (37.25%) had low or inconclusive avidity, IgM indexes between 0.6 and 11.9, and five infected newborns and one stillbirth. In two infected newborns and the stillbirth maternal IgM indexes were low and in one infected newborn the only maternal parameter that suggested fetal risk was IgG-avidity. In the present study, IgG-avidity performed in single samples from positive IgM pregnant women helped to determine the risk of transmission at any time during pregnancy, especially when the indexes of the two tests were analysed with respect to gestational age. This model may be less expensive in developing countries where there is a high prevalence of infection than the follow-up of susceptible mothers until childbirth with monthly serology, and it creates a new perspective for the diagnosis of congenital toxoplasmosis.

Determinação da tenacidade à fratura de adesivos estruturais em modo misto pelo ensaio Single-Leg Bending

A utilização de juntas adesivas em aplicações industriais tem vindo a aumentar, em detrimento dos métodos tradicionais tais como a soldadura, brasagem e ligações aparafusadas e rebitadas. Este facto deve-se às vantagens que estas oferecem, como o facto de serem mais leves, comportarem-se bem sob cargas cíclicas ou de fadiga, a ligação de materiais diferentes e menores concentrações de tensões. Para aumentar a confiança no projeto de estruturas adesivas, é importante conseguir prever com precisão a sua resistência mecânica e respetivas propriedades de fratura (taxa crítica de libertação de energia de deformação à tração, GIC, e corte, GIIC). Estas propriedades estão diretamente relacionadas com a Mecânica da Fratura e são estimadas através de uma análise energética. Para este efeito, distinguem-se três tipos de modelos: modelos que necessitam da medição do comprimento de fenda durante a propagação do dano, modelos que utilizam um comprimento de fenda equivalente e métodos baseados no integral J. Como na maioria dos casos as solicitações ocorrem em modo misto (combinação de tração com corte), é de grande importância a perceção da fratura nesta condições, nomeadamente das taxas de libertação de energia relativamente a diferentes critérios ou envelopes de fratura. Esta comparação permite, por exemplo, averiguar qual o melhor critério energético de rotura a utilizar em modelos numéricos baseados em Modelos de Dano Coesivo. Neste trabalho é realizado um estudo experimental utilizando o ensaio Single-Leg Bending (SLB) em provetes colados com três tipos de adesivos, de forma a estudar e comparar as suas propriedades de fratura. Para tal, são aplicados alguns modelos de redução da taxa de libertação de energia de deformação à tração, GI, e corte, GII, enquadrados nos modelos que necessitam da medição do comprimento de fenda e nos modelos que utilizam um comprimento de fenda equivalente. Numa fase posterior, procedeu-se à análise e comparação dos resultados adquiridos durante a fase experimental de GI e GII de cada adesivo. A discussão de resultados foi também feita através da análise dos valores obtidos em diversos envelopes de fratura, no sentido de averiguar qual o critério de rotura mais adequado a considerar para cada adesivo. Foi obtida uma concordância bastante boa entre métodos de determinação de GI e GII, com exceção do adesivo mais dúctil, para o qual o método baseado no comprimento de fenda equivalente apresentou resultados ligeiramente superiores.

Adhesive selection for single lap bonded joints: Experimentation and advanced techniques for strength prediction

The integrity of multi-component structures is usually determined by their unions. Adhesive-bonding is often used over traditional methods because of the reduction of stress concentrations, reduced weight penalty, and easy manufacturing. Commercial adhesives range from strong and brittle (e.g., Araldite® AV138) to less strong and ductile (e.g., Araldite® 2015). A new family of polyurethane adhesives combines high strength and ductility (e.g., Sikaforce® 7888). In this work, the performance of the three above-mentioned adhesives was tested in single lap joints with varying values of overlap length (LO). The experimental work carried out is accompanied by a detailed numerical analysis by finite elements, either based on cohesive zone models (CZM) or the extended finite element method (XFEM). This procedure enabled detailing the performance of these predictive techniques applied to bonded joints. Moreover, it was possible to evaluate which family of adhesives is more suited for each joint geometry. CZM revealed to be highly accurate, except for largely ductile adhesives, although this could be circumvented with a different cohesive law. XFEM is not the most suited technique for mixed-mode damage growth, but a rough prediction was achieved.

Single operation multiple data - paralelismo de dados ao nível da sub-rotina

Dissertação para obtenção do Grau de Mestre em Engenharia Informática

ABO-Incompatible Liver Transplantation in Acute Liver Failure: A Single Portuguese Center Study

INTRODUCTION: ABO-incompatible liver transplantation (ABOi LT) is considered to be a rescue option in emergency transplantation. Herein, we have reported our experience with ABOi LT including long-term survival and major complications in these situations. PATIENT AND METHODS: ABOi LT was performed in cases of severe hepatic failure with imminent death. The standard immunosuppression consisted of basiliximab, corticosteroids, tacrolimus, and mycophenolate mofetil. Pretransplantation patients with anti-ABO titers above 16 underwent plasmapheresis. If the titer was above 128, intravenous immunoglobulin (IVIG) was added at the end of plasmapheresis. The therapeutic approach was based on the clinical situation, hepatic function, and titer evolution. A rapid increase in titer required five consecutive plasmapheresis sessions followed by administration of IVIG, and at the end of the fifth session, rituximab. RESULTS: From January 2009 to July 2012, 10 patients, including 4 men and 6 women of mean age 47.8 years (range, 29 to 64 years), underwent ABOi LT. At a mean follow-up of 19.6 months (range, 2 days to 39 months), 5 patients are alive including 4 with their original grafts. One patient was retransplanted at 9 months. Major complications were infections, which were responsible for 3 deaths due to multiorgan septic failure (2 during the first month); rejection episodes (4 biopsy-proven of humoral rejections in 3 patients and 1 cellular rejection) and biliary. CONCLUSION: The use of ABOi LT as a life-saving procedure is justifiable in emergencies when no other donor is available. With careful recipient selection close monitoring of hemagglutinins and specific immunosuppression we have obtained acceptable outcomes.

High-Content Analysis of Breast Cancer Using Single-Cell Deep Transfer Learning

High-content analysis has revolutionized cancer drug discovery by identifying substances that alter the phenotype of a cell, which prevents tumor growth and metastasis. The high-resolution biofluorescence images from assays allow precise quantitative measures enabling the distinction of small molecules of a host cell from a tumor. In this work, we are particularly interested in the application of deep neural networks (DNNs), a cutting-edge machine learning method, to the classification of compounds in chemical mechanisms of action (MOAs). Compound classification has been performed using image-based profiling methods sometimes combined with feature reduction methods such as principal component analysis or factor analysis. In this article, we map the input features of each cell to a particular MOA class without using any treatment-level profiles or feature reduction methods. To the best of our knowledge, this is the first application of DNN in this domain, leveraging single-cell information. Furthermore, we use deep transfer learning (DTL) to alleviate the intensive and computational demanding effort of searching the huge parameter's space of a DNN. Results show that using this approach, we obtain a 30% speedup and a 2% accuracy improvement.

A Avaliação Imobiliária e a sua relação com o Investimento

O presente relatório visa cumprir os requisitos da unidade curricular Dissertação, Projeto ou Estágio (DIPRE) do mestrado em Engenharia Civil do Instituto Superior de Engenharia do Porto (ISEP). O estágio curricular decorreu na empresa VPM - Vaz Pinto Mendes - Unipessoal Lda, sob o tema: “A avaliação imobiliária e a sua relação com o investimento”. A avaliação imobiliária visa determinar o valor associado aos bens imóveis. Pode ser aplicada a todo o tipo de bens imóveis, tais como: apartamentos e moradias uni e multifamiliares, espaços comerciais e de serviços, quintas, unidades hoteleiras e industriais, complexos desportivos, entre outros. A avaliação imobiliária poderá ser solicitada por parte de proprietários ou arrendatários dos imóveis, por empresas, tribunais, advogados e solicitadores. Apresenta diversos fins, tais como a determinação do valor de indemnização devido a expropriações, o financiamento hipotecário para compra ou construção de imóveis, partilhas, estudo de um investimento financeiro, intenção de venda ou arrendamento, efeitos fiscais ou apenas o simples conhecimento do valor aproximado das propriedades que se possui. O presente estudo visa abordar o atual mercado imobiliário nacional, o procedimento de realização de uma avaliação imobiliária e principalmente os métodos de avaliação tradicionais.

Safety and Effectiveness of the Genous™ Endothelial Progenitor Cell-Capture Stent in the First Year Following ST-Elevation Acute Myocardial Infarction: A Single Center Experience and Review of the Literature

PURPOSE: The Genous™ stent (GS) is designed to accelerate endothelization, which is potentially useful in the pro-thrombotic environment of ST-elevation acute myocardial infarction (STEMI). We aimed to evaluate the safety and effectiveness of the GS in the first year following primary percutaneous coronary intervention (PCI) and to compare our results with the few previously published studies. METHODS AND MATERIALS: All patients admitted to a single center due to STEMI that underwent primary PCI using exclusively GS, between May 2006 and January 2012, were enrolled. The primary study endpoints were major adverse cardiac events (MACEs), defined as the composite of cardiac death, acute myocardial infarction and target vessel revascularization, at one and 12months. RESULTS: In the cohort of 109 patients (73.4% male, 59 ±12years), 24.8% were diabetic. PCI was performed in 116 lesions with angiographic success in 99.1%, using 148 GS with median diameter of 3.00mm (2.50-4.00) and median length of 15mm (9-33). Cumulative MACEs were 2.8% at one month and 6.4% at 12months. Three stent thromboses (2.8%), all subacute, and one stent restenosis (0.9%) occurred. These accounted for the four target vessel revascularizations (3.7%). At 12months, 33.9% of patients were not on dual antiplatelet therapy. CONCLUSIONS: GS was safe and effective in the first year following primary PCI in STEMI, with an apparently safer profile comparing with the previously published data. SUMMARY: We report the safety and effectiveness of the Genous™ stent (GS) in the first year following primary percutaneous coronary intervention in ST-elevation acute myocardial infarction. A comprehensive review of the few studies that have been published on this subject was included and some suggest a less safe profile of the GS. Our results and the critical review included may add information and reinforce the safety and effectiveness of the GS in ST-elevation in acute myocardial infarction.

EFFECTS OF SINGLE, BINARY AND TERTIARY COMBINATIONS WITH Jatropha gossypifolia AND OTHER PLANT-DERIVED MOLLUSCICIDES ON REPRODUCTION AND SURVIVAL OF THE SNAIL Lymnaea acuminata

The effect of sub-lethal doses (40% and 80% of LC50/24h) of plant derived molluscicides of singly, binary (1:1) and tertiary (1:1:1) combinations of the Rutin, Ellagic acid, Betulin and taraxerol with J. gossypifolia latex, leaf and stem bark powder extracts and their active component on the reproduction of freshwater snail Lymnaea acuminata have been studied. It was observed that the J. gossypifolia latex, stem bark, individual leaf and their combinations with other plant derived active molluscicidal components caused a significant reduction in fecundity, hatchability and survival of young snails. It is believed that sub-lethal exposure of these molluscicides on snail reproduction is a complex process involving more than one factor in reducing the reproductive capacity.

Strength and damage analysis of composite-aluminium adhesively-bonded single-lap joints

With the need to find an alternative way to mechanical and welding joints, and at the same time to overcome some limitations linked to these traditional techniques, adhesive bonds can be used. Adhesive bonding is a permanent joining process that uses an adhesive to bond the components of a structure. Composite materials reinforced with fibres are becoming increasingly popular in many applications as a result of a number of competitive advantages. In the manufacture of composite structures, although the fabrication techniques reduce to the minimum by means of advanced manufacturing techniques, the use of connections is still required due to the typical size limitations and design, technological and logistical aspects. Moreover, it is known that in many high performance structures, unions between composite materials with other light metals such as aluminium are required, for purposes of structural optimization. This work deals with the experimental and numerical study of single lap joints (SLJ), bonded with a brittle (Nagase Chemtex Denatite XNRH6823) and a ductile adhesive (Nagase Chemtex Denatite XNR6852). These are applied to hybrid joints between aluminium (AL6082-T651) and carbon fibre reinforced plastic (CFRP; Texipreg HS 160 RM) adherends in joints with different overlap lengths (LO) under a tensile loading. The Finite Element (FE) Method is used to perform detailed stress and damage analyses allowing to explain the joints’ behaviour and the use of cohesive zone models (CZM) enables predicting the joint strength and creating a simple and rapid design methodology. The use of numerical methods to simulate the behaviour of the joints can lead to savings of time and resources by optimizing the geometry and material parameters of the joints. The joints’ strength and failure modes were highly dependent on the adhesive, and this behaviour was successfully modelled numerically. Using a brittle adhesive resulted in a negligible maximum load (Pm) improvement with LO. The joints bonded with the ductile adhesive showed a nearly linear improvement of Pm with LO.

Psychiatric and Psychosocial Predictors of Medical Outcome After Liver Transplantation: a Prospective, Single-Center Study

OBJECTIVE: Recognizing the potential impact of psychiatric and psychosocial factors on liver transplant patient outcomes is essential to apply special follow-up for more vulnerable patients. The aim of this article was to investigate the psychiatric and psychosocial factors predicted medical outcomes of liver transplanted patients. METHODS: We studied 150 consecutive transplant candidates, attending our outpatient transplantation clinic, including 84 who had been grafted 11 of whom died and 3 retransplanted. RESULTS: We observed that active coping was an important predictor of length of stay after liver transplantation. Neuroticism and social support were important predictors of mortality after liver transplantation. CONCLUSION: It may be useful to identify patients with low scores for active coping and for social support and high scores for neuroticism to design special modes of follow-up to improve their medical outcomes.

Prophylactic Use of Liposomal Amphotericin B in Preventing Fungal Infections Early After Liver Transplantation: a Retrospective, Single-Center Study

In this study the authors evaluated the efficacy of prophylaxis with liposomal amphotericin B (L-AmB) in the incidence of fungal infections (FI) during the first 3 months after liver transplant (LT). The study was retrospective and accessed a 4-year period from 2008 to 2011. All patients who died in the first 48 hours after LT were excluded. Patients were divided by the risk groups for FI: Group 1, high-risk (at least 1 of the following conditions: urgent LT; serum creatinine >2 mg/dL; early acute kidney injury [AKI] after LT; retransplantation; surgical exploration early post-LT; transfused cellular blood components [>40 U]); and Group 2, low-risk patients. Group 1 patients were further separated into those who received antifungal prophylaxis with L-AmB and those who did not. Prophylaxis with L-AmB consisted of intravenous administration of L-AmB, 100 mg daily for 14 days. Four hundred ninety-two patients underwent LT; 31 died in the first 48 hours after LT. From the remaining 461 patients, 104 presented with high-risk factors for FI (Group 1); of these, 66 patients received antifungal prophylaxis and 38 did not. In this group 8 FI were observed, 5 in patients without antifungal prophylaxis (P = .011). Three more FI were identified in Group 2. By logistic regression analysis, the categorical variable high-risk group was independently related to the occurrence of invasive FI (P = .006). We conclude that prophylaxis with L-AmB after LT was effective in reducing the incidence of FI. No influence on mortality was detected.

The Hybrid Approach for Palliation of Hypoplastic Left Heart Syndrome: Intermediate Results of a Single-Center Experience

INTRODUCTION: Hypoplastic left heart syndrome (HLHS) is a major cause of cardiac death during the first week of life. The hybrid approach is a reliable, reproducible treatment option for patients with HLHS. Herein we report our results using this approach, focusing on its efficacy, safety and late outcome. METHODS: We reviewed prospectively collected data on patients treated for HLHS using a hybrid approach between July 2007 and September 2014. RESULTS: Nine patients had a stage 1 hybrid procedure, with seven undergoing a comprehensive stage 2 procedure. One patient completed the Fontan procedure. Five patients underwent balloon atrial septostomy after the hybrid procedure; in three patients, a stent was placed across the atrial septum. There were three deaths: two early after the hybrid procedure and one early after stage two palliation. Overall survival was 66%. CONCLUSIONS: In our single-center series, the hybrid approach for HLHS yields intermediate results comparable to those of the Norwood strategy. The existence of dedicated teams for the diagnosis and management of these patients, preferably in high-volume centers, is of major importance in this condition.