Wave loads on the foundation of a bottom-hinged modular flap structure

Large loads result in expensive foundations which are a substantial proportion of the capital cost of flap-type Wave Energy Converters (WECs). Devices such as Oyster 800, currently deployed at the European Marine Energy Centre (EMEC), comprise a single flap for the full width of the machine. Splitting a flap-type device into smaller vertical flap modules, to make a ‘modular-flap’, might reduce the total foundation loads, whilst still providing acceptable performance in terms of energy conversion.
This paper investigates the foundation loads of an undamped modular-flap device, comparing them to those for a rigid flap of an equivalent width. Physical modelling in a wave tank is used, with loads recorded using a six degree of freedom (DoF) load cell. Both fatigue and extreme loading analysis was conducted. The rotations of the flaps were also recorded, using a motion-tracking system.

New modular structure DC-DC converter without electrolytic capacitors for renewable energy applications

High-radix systolic modular multiplication on reconfigurable hardware

The overall aim of the work presented in this paper has been to develop Montgomery modular multiplication architectures suitable for implementation on modern reconfigurable hardware. Accordingly, novel high-radix systolic array Montgomery multiplier designs are presented, as we believe that the inherent regular structure and absence of global interconnect associated with these, make them well-suited for implementation on modern FPGAs. Unlike previous approaches, each processing element (PE) comprises both an adder and a multiplier. The inclusion of a multiplier in the PE means that the need to pre-compute or store any multiples of the operands is avoided. This also allows very high-radix implementations to be realised, further reducing the amount of clock cycles per modular multiplication, while still maintaining a competitive critical delay. For demonstrative purposes, 512-bit and 1024-bit FPGA implementations using radices of 2(8) and 2(16) are presented. The subsequent throughput rates are the fastest reported to date.

Wahrnehmungs- und Betätigungsformen des Vertrauens im deutsch-französischen Vergleich:Representations, Forms and practice of Trust in French and German comparison

Thomas Würtenberger, Dieter K. Tscheulin, Jean-Claude Usunier, Dominique Jeannerod, Eric Davoine (Hrsg.):
Wahrnehmungs- und Betätigungsformen des Vertrauens im deutsch-französischen Vergleich
Berlin, Berlin GmbH, 2002

Reva Siegel and the Role of Religion in Constructing the Meaning of ‘Human Dignity

The “religious understanding” of dignity is a topic of considerable complexity and is the subject of extensive scholarship. In this paper, I consider understandings of dignity that are currently under discussion in Roman Catholic circles, not least because Catholic discussions of dignity are often seen as influential in public policy and legal interpretation, directly and indirectly. I shall focus on one relatively neglected issue in legal scholarship: how scholars go about the task of identifying what a particular religion’s understanding of human dignity involves.
To illustrate the methodological problems that such an enterprise raises, I shall take one attempt by a scholar writing in the field of secular legal scholarship to describe Catholic understandings of dignity in the context of abortion and same-sex marriage. The discussion is that of Reva Siegel, an academic lawyer at Yale University; her recent analysis of differing understandings of dignity illustrates some of the issues that arise when the secular scholarly community addresses religious understandings of dignity.

Relationships between Religion and Two Forms of Homonegativity in Europe—A Multilevel Analysis of Effects of Believing, Belonging and Religious Practice

This paper examines relationships between religion and two forms of homonegativity
across 43 European countries using a bivariate response binary logistic multilevel model. The model analyzes effects of religious believing, belonging and practice on two response variables: a) a moral rejection of homosexuality as a practice and b) intolerance toward homosexuals as a group. The findings indicate that both forms of homonegativity are prevalent in Europe. Traditional doctrinal religious believing (belief in a personal God) is positively related to a moral rejection of homosexuality but to a much lesser extent associated with intolerance toward homosexuals as a group. Members of religious denominations are more likely than non-members to reject homosexuality as morally wrong and to reject homosexuals as neighbors. The analysis found significant differences between denominations that are likely context-dependent. Attendance at religious services is positively related to homonegativity in a majority of countries. The findings vary considerably across countries: Religion is more strongly related to homonegativity in Western than in Eastern Europe. In the post-soviet countries homonegativity appears to be largely a secular phenomenon. National contexts of high religiosity, high perceived government corruption, high income inequality and shortcomings in the implementation of gay rights in the countries’ legislations are statistically related to higher levels of both moralistic homonegativity and intolerance toward homosexuals as a group.

Characterisation and modelling of the thermorheological properties of pharmaceutical polymers and their blends using capillary rheometry: Implications for hot melt processing of dosage forms.

Given the growing interest in thermal processing methods, this study describes the use of an advanced rheological technique, capillary rheometry, to accurately determine the thermorheological properties of two pharmaceutical polymers, Eudragit E100 (E100) and hydroxypropylcellulose JF (HPC) and their blends, both in the presence and absence of a model therapeutic agent (quinine, as the base and hydrochloride salt). Furthermore, the glass transition temperatures (Tg) of the cooled extrudates produced using capillary rheometry were characterised using Dynamic Mechanical Thermal Analysis (DMTA) thereby enabling correlations to be drawn between the information derived from capillary rheometry and the glass transition properties of the extrudates. The shear viscosities of E100 and HPC (and their blends) decreased as functions of increasing temperature and shear rates, with the shear viscosity of E100 being significantly greater than that of HPC at all temperatures and shear rates. All platforms were readily processed at shear rates relevant to extrusion (approximately 200–300 s−1) and injection moulding (approximately 900 s−1). Quinine base was observed to lower the shear viscosities of E100 and E100/HPC blends during processing and the Tg of extrudates, indicative of plasticisation at processing temperatures and when cooled (i.e. in the solid state). Quinine hydrochloride (20% w/w) increased the shear viscosities of E100 and HPC and their blends during processing and did not affect the Tg of the parent polymer. However, the shear viscosities of these systems were not prohibitive to processing at shear rates relevant to extrusion and injection moulding. As the ratio of E100:HPC increased within the polymer blends the effects of quinine base on the lowering of both shear viscosity and Tg of the polymer blends increased, reflecting the greater solubility of quinine within E100. In conclusion, this study has highlighted the importance of capillary rheometry in identifying processing conditions, polymer miscibility and plasticisation phenomena.

Genome wide interactions of wild-type and activator bypass forms of σ54

Enhancer-dependent transcription involving the promoter specificity factor σ54 is widely distributed amongst bacteria and commonly associated with cell envelope function. For transcription initiation, σ54-RNA polymerase yields open promoter complexes through its remodelling by cognate AAA+ ATPase activators. Since activators can be bypassed in vitro, bypass transcription in vivo could be a source of emergent gene expression along evolutionary pathways yielding new control networks and transcription patterns. At a single test promoter in vivo bypass transcription was not observed. We now use genome-wide transcription profiling, genome-wide mutagenesis and gene over-expression strategies in Escherichia coli, to (i) scope the range of bypass transcription in vivo and (ii) identify genes which might alter bypass transcription in vivo. We find little evidence for pervasive bypass transcription in vivo with only a small subset of σ54 promoters functioning without activators. Results also suggest no one gene limits bypass transcription in vivo, arguing bypass transcription is strongly kept in check. Promoter sequences subject to repression by σ54 were evident, indicating loss of rpoN (encoding σ54) rather than creating rpoN bypass alleles would be one evolutionary route for new gene expression patterns. Finally, cold-shock promoters showed unusual σ54-dependence in vivo not readily correlated with conventional σ54 binding-sites.

Perspectives on social citizenship in the EU – from status positivus to status socialis activus via two forms of transnational solidarity

Ever since the inauguration of EU citizenship, elements of social citizenship have been on the agenda of European integration. European level social benefits were proposed early on, and demands for collective labour rights have followed suit. This chapter uses the theoretical umbrella of transnational social citizenship in order to link transnational access to social benefits and collective labour rights. It promotes transnational rights as the best way to conceptualise EU social citizenship as an institution enabling the enjoyment of EU integration without being forced to forego social rights at other levels. Such a perspective sits well in a collection on EU citizenship and federalism, since it simultaneously challenges demands of renationalisation of social rights in the EU and pleas to reduce EU-level citizenship rights to a merely liberal dimension. Social citizenship as promoted here requires an interactive conceptualisation of regulatory and judicial powers at different levels of government as typical for federal systems.
In linking citizenship with human rights the chapter highlights different statuses of citizens. It argues that the rights constituted by social citizenship derive from a status positivus and a status socialis activus, expanding the time-honoured categories of Jellinek. This concept is developed further by linking the notions of receptive solidarity to the status positivus and the notion of participative solidarity to the status socialis activus. In relation to European Union citizenship it promotes a sustainable transnational social citizenship catering for receptive and participative solidarity.
These ideas contrast with most current discourses on EU citizenship. The stress on social citizenship takes issue with a retreat to mere liberalist notions of EU-level citizenship, and the stress on rights takes issue with conceptualising EU citizenship as a community bond with obligations, downplaying the empowering potential of rights. The difficulty of conceptualising transnational social citizenship is to avoid, on the one hand, taking up the tune of populist discourses imagining those moving beyond state borders as a threat to national social citizenship and, on the other hand, to reject the legitimate fears of those remaining at home of creating rupture in the social fabric of Europe’s society. Promoting transnational social citizenship rights based on receptive and participative solidarity the present chapter aims to contribute to avoiding these pitfalls.