Semi-intensive shrimp farming system of Kerala, India: a production function analysis

An analysis of the factor-product relationship in the semi-intensive shrimp farming system of Kerala, farm basis and hectare basis, we are attempted and the results reported in this paper. The Cobb-Douglas model, in which the physical relationship between input and output is estimated, and the marginal analysis then employed to evaluate the producer behaviour, was used for the analysis. The study was based on empirical data collected during November 1994 to May 1996, covering three seasons, from 21 farms spread over Alappuzha, Ernakulam and Kasaragod districts of the state. The sample covered a total area of 61.06 ha. Of the 11 explanatory variables considered in the model, the size of the farm, casual labour and chemical fertilizers were found statistically significant. It was also observed that the factors such as age of pond, experience of the farmer, feed, miscellaneous costs, number of seed stocked and skilled labour contributed positively to the output. The estimated industry production function exhibited unitary economies of scale. The estimated mean output was 3937 kg/ha. The test of multi-co-linearity showed that there is no problem of dominant variable. On the basis of the marginal product and the given input-output prices, the optimum amounts of seed, feed and casual labour were estimated. They were about 97139 seed, 959 kg of feed and 585 man-days of casual labour per farm. This indicated the need for reducing the stocking density and amount of feed from the present levels, in order to maximise profit. Based on the finding of the study, suggestions for improving the industry production function are proposed.

The modelling of soil plasticity

The modeling of the soil plasticity was discussed and it was shown that the grain breakage is an important factor of the plastic soil behaviour. A reduction of internal coefficient of friction was observed when stress-level was increased. The yield paths of all stress path tests determined by curve fitting were presented.

Dem analysis of soil-pipeline interaction in sand under lateral and upward movements at deep embedment

The soil-pipeline interactions under lateral and upward pipe movements in sand are investigated using DEM analysis. The simulations are performed for both medium and dense sand conditions at different embedment ratios of up to 60. The comparison of peak dimensionless forces from the DEM and earlier FEM analyses shows that, for medium sand, both methods show similar peak dimensionless forces. For dense sand, the DEM analysis gives more gradual transition of shallow to deep failure mechanisms than the FEM analysis and the peak dimensionless forces at very deep depth are higher in the DEM analysis than in the FEM analysis. Comparison of the deformation mechanism suggests that this is due to the differences in soil movements around the pipe associated with its particulate nature. The DEM analysis provides supplementary data of the soil-pipeline interaction in sand at deep embedment condition.

A study on performances of intensification in the farming system of a shrimp farm at Cox's Bazar, Bangladesh

This study examines the harvest and mean production in relation to the stocking of P. monodon fry during the period between March 1992 and October 1994, at the farm owned by M/s Monugung Sea Food Ltd., Cox's Bazar. The analysis shows that production figures were initially up to expectation, but after harvesting 4 crops within 16 months, production sharply decreased. The unexpected high mortality of the growing stock was due to outbreak of an uncontrollabe disease (Vibriosis). Significantly higher variations in production, survival and growth were also noted among the different treatments.

Effects of soil fabric on behaviors of granular soils: Microscopic modeling

The effects of initial soil fabric on behaviors of granular soils are investigated by using Distinct Element Method (DEM) numerical simulation. Soil specimens are represented by an assembly of non-uniform sized spheres with different initial contact normal distributions. Isotropically consolidated triaxial compression loading and extension unloading in both undrained and drained conditions are simulated for vertically- and horizontally-sheared specimens. The numerical simulation results are compared qualitatively with the published experimental data and the effects of initial soil fabric on resulting soil behaviors are discussed, including the effects of specimen reconstitution methods, effects of large preshearing, and anisotropic characteristics in undrained and drained conditions. The effects of initial soil fabric and mode of shearing on the quasi-steady state line are also investigated. The numerical simulation results can systematically explain that the observed experimental behaviors of granular soils are due principally to their conditions of the initial soil fabric. This outcome provides insights into the observed phenomena in microscopic view. © 2011 Elsevier Ltd.

Metal Retention Experiments for the Design of Soil-Mix Technology Permeable Reactive Barriers

Soil-mix technology is effective for the construction of permeable reactive barriers (PRBs) for in situ groundwater treatment. The objective of this study was to perform initial experiments for the design of soil-mix technology PRBs according to (i) sorption isotherm, (ii) reaction kinetics and (iii) mass balance of the contaminants. The four tested reactive systems were: (i) a granular zeolite (clinoptilolite-GZ), (ii) a granular organoclay (GO), (iii) a 1:1-mixture GZ and model sandy clayey soil and (iv) a 1:1:1-mixture of GZ, GO and model soil. The laboratory experiments consisted of batch tests (volume 900mL and sorbent mass 18g) with a multimetal solution of Pb, Cu, Zn, Cd and Ni. For the adsorption experiment, the initial concentrations ranged from 0.01 to 0.5mM (2.5 to 30mg/L). The maximum metal retention was measured in a batch test (300mg/L for each metal, volume 900mL, sorbent mass 90-4.5g). The reactive material efficiency order was found to be GZ>GZ-soil mix>GZ-soil-GO mix>GO. Langmuir isotherms modelled the adsorption, even in presence of a mixed cations solution. Adsorption was energetically favourable and spontaneous in all cases. Metals were removed according to the second order reaction kinetics; GZ and the 1:1-mix were very similar. The maximum retention capacity was 0.1-0.2mmol/g for Pb in the presence of clinoptilolite; for Cu, Zn, Cd and Ni, it was below 0.05mmol/g for the four reactive systems. Mixing granular zeolite, organoclay and model soil increased the chemisorption. Providing that GZ is reactive enough for the specific conditions, GZ can be mixed to obtain the required sorption. Granular clinoptilolite addition to soil is recommended for PRBs for metal contaminated groundwater. The laboratory experiments consisted of batch tests with a multimetal solution of Pb, Cu, Zn, Cd and Ni. The four reactive materials chosen were granular zeolite, clinoptilolite and model sandy clayey soil, granular organoclay and a mix of clinoptilolite, model soil and organoclay. The reactive material efficiency order was found to be granular clinoptilolite>clinoptilolite-soil mix>clinoptilolite-soil-organoclay mix>granular organoclay. © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Nursery management system of stinging catfish, Heteropneustes fossilis and walking catfish, Clarias batrachus in Bangladesh

A total of four experiments were conducted to develop nursery management system for the two important native catfishes viz. stinging catfish, Heteropneustes fossilis and walking catfish, Clarias batrachus during 2003 and 2004. Two experiments were conducted in on-station condition to determine stocking density efficacy in hapa and in earthen mini ponds for H. fossilis. This was followed by on-farm trial on stocking density in earthen mini ponds. In hapa, the highest survival rate was 60% for H. fosssilis at stocking density of 100/square meter; followed by 54.5 and 50% at stocking densities of 150 and 200/square meter, respectively. Similarly, gain in weight and length was also better in lower stocking densities. Similar survival rate (45 to 55%) was observed in three densities in earthen mini ponds. However, gain in weight and length showed no significant (p<0.05) differences. H. fossilis, C. batrachus showed almost similar survival rates (57.5-59.0%) in all the three stocking densities (100, 150 and 200/square meter) in earthen mini ponds in on-station condition. In terms of gain in weight and length showed no significant (p<0.05) differences in pond conditions. Almost similar result was obtained in terms of growth and survival in on-farm condition.

Caudal neurosecretory system of four hill stream fishes of India

Caudal neurosecretory system is an additional neuroendocrine system found in fishes. Great variation has been observed among different groups of fishes, so far its organization is concerned. Much work has been undertaken on the caudal neurosecretory system of elasmobranchs and teleosts. Large size scattered Dahlgren cells in the posterior end of spinal cord, corresponding to last few vertebrae, with long running axon process and a neurohaemal organ the urophysis are the characteristic features of the system. Although thoroughly investigated in fresh water carps, no work is reported in hill-stream fishes. In an attempt to investigate structure and organization of caudal neurosecretory system in hill-stream fishes, present investigation was undertaken in four hill-stream fish of Indian freshwater namely, Barilius bendelensis, Garra gotyla, Schizothorax plagiostomus and Tor tor. The organization of this system in hill-stream fishes was found to be quite different from that observed in fresh water carps. It displays an organization which is more close to the organization of caudal neurosecretory system observed in elasmobranchs. The features are described and discussed.

Plankton identified in stomach contents of Oreochromis niloticus (Pisces, Cichlidae) and the water system of Lakes Edward, George, and Kazinga channel - Uganda

The samples were collected from Lake Edward at Rwenshama, Kisenyi and Katwe, and from Lake George at Mahyoro, Kashaka and Kasenyi and in Kazinga Channel at Katunguru. The organisms identified from the water samples obtained irrespective of station or depth were mainly the phytoplankton (diatoms, blue-green algae and green algae). Of the phytoplankton, blue green-algae were the most abundant both in quantity and number of species especially in L. George. In order of importance were Microcystis spp, Planktolyngbya spp and Anabaenopsis spp were the dominant blue greens. Diatoms and green algae were present but less abundant. The estimated proportions of different types of phytoplankton identified in O. niloticus stomach contents indicate that bluegreen algae were the most abundant followed by the diatoms and green algae.

System-of-system Approaches and Challenges for Multi-Site Manufacturing

In the multi-site manufacturing domain, systems-of-systems (SoS) are rarely called so. However, there exist a number of collaborative manufacturing paradigms which closely relate to system-of-system principles. These include distributed manufacturing, dispersed network manufacturing, virtual enterprises and cloud manufacturing/manufacturing-as-a-service. This paper provides an overview of these terms and paradigms, exploring their characteristics, overlaps and differences. These manufacturing paradigms are then considered in relation to five key system-of-systems characteristics: autonomy, belonging, connectivity, diversity and emergence. Data collected from two surveys of academic and industry experts is presented and discussed, with key challenges and barriers to multi-site manufacturing SoS identified.