Analysis of mechanical behavior of implant-supported prostheses in the anterior maxilla: analysis by speckle pattern interferometry

The use of implants to rehabilitation of total edentulous, partial edentulous or single tooth is increasing, it is due to the high rate of success that this type of treatment present. The objective of this study was to analyze the mechanical behavior of different positions of two dental implants in a rehabilitation of 4 teeth in the region of maxilla anterior. The groups studied were divided according the positioning of the implants. The Group 1: Internal Hexagonal implant in position of lateral incisors and pontic in region of central incisors; Group 2: Internal Hexagonal implant in position of central incisors and cantilever of the lateral incisors and Group3 - : Internal Hexagonal implants alternate with suspended elements. The Electronic Speckle Pattern Interferometry (ESPI) technique was selected for the mechanical evaluation of the 3 groups performance. The results are shown in interferometric phase maps representing the displacement field of the prosthetic structure.

Clinical and Microbiologic Follow-Up Evaluations After Non-Surgical Periodontal Treatment With Erbium:YAG Laser and Scaling and Root Planing

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Evaluation of mechanical properties of dental feldsphatic porcelains for metal and zirconia core

Studies has been reported a significant incidence of chipping of the feldspathic porcelain veneer in zirconia-based restorations. The purpose of this study was to compare the three-point flexural strength (MPa), Weibull parameters, Vickers hardness (VHN) and Vickers indentation fracture toughness (MPa/mm(1/2)) in feldspatic porcelains for metal and for zirconia frameworks. Bar specimens were made with the porcelains e.MaxCeram (EM) and VitaVM9 (V9) for zirconia core, and Duceragold (DG) and VitaVMK95 (VK) for metal core (n = 15). Kruskal-Wallis and Dun test were used for statistical analysis. There was no significant difference (p=0.31) among the porcelains in the flexural strength (Median = 73.2; 74.6; 74.5; 74.4). Weibull calculation presented highest reliability for VK (10.8) followed by em (7.1), V9 (5.7) and DG (5.6). Vickers hardness test showed that em (536.3), V9 (579.9) and VK (522.1) had no difference and DG (489.6) had the lowest value (p<.001). The highest fracture toughness was to VK (1.77), DG (1.58) had an intermediate value while V9 (1.33) and em (1.18) had the lowest values (p<.001). Despite of the suitable flexural strength, reliability and high hardness, the porcelains used to zirconia-based fixed dental prostheses showed lower fracture toughness values.

Bond strength of an adhesive system irradiated with Nd : YAG laser in dentin treated with Er : YAG laser

The purpose of this in vitro study was to verify through micro tensile bond test the bond strength of an adhesive system irradiated with Nd:YAG laser in dentine previously treated with Er:YAG laser. Twenty caries free extracted human third molars were used. The teeth were divided in four experimental groups (n = 5): (G1) control group; (G2) irradiation of the adhesive system with the Nd:YAG laser; (G3) dentin treatment with Er:YAG laser; (G4) dentin treatment with Er:YAG laser followed by the irradiation of the adhesive system with Nd:YAG laser. The Er:YAG laser fluency parameter for the dentin treatment was of 60 J/cm(2). ne adhesive system was irradiated with the Nd:YAG laser with fluency of 100 J/cm(2). Dental restorations were performed with Adper Single Bond 2/Z250. One tooth from each group was prepared for the evaluation of the adhesive interface under SEM and bond failure tests were also performed and evaluated. The statistical analysis showed statistical significant difference between the groups G1 and G3, G1 and G4, G2 and G3, and G2 and G4; and similarity between the groups G1 and G2, and G3 and G4. The adhesive failures were predominant in all the experimental groups. The SEM analysis showed an adhesive interface with features confirming the results of the mechanical tests. The Nd:YAG laser on the adhesive system did not influence the bond strength in dentin treated or not with the Er:YAG laser.

Fibrosis-related gene expression in the prostate is modulated by doxazosin treatment

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Homeopathic treatment for bone regeneration: experimental study

Aim and method: The objective of this research was to study the effect of homeopathic treatment with Plumbum metallicum (Plumbum met.) on mandibular bone repair in rats.Materials and methods: We analyzed the mandibles of 60 male rats, approximately 3-month-old, randomly divided into three groups of 20 animals each: control, treated with calcitonin, and treated with a homeopathic medicine. A circumscribed bone defect measuring 4 mm in diameter was made in the mandible and covered with a pollytetrafluorethylene (PTFE) barrier. The group treated with calcitonin received 2 IU/kg intramuscularly three times a week; the group treated with Plumbum met. 30c received three drops in water every day. The animals were sacrificed after 7,14,21 and 28 days. The mandibles were removed and submitted to histologic and histomorphometric analyses.Results: Data were analyzed statistically by two-way ANOVA and by the Tukey test. The interaction effect (ANOVA, F df(6; 48) = 4.64; p = 0.001 < 0.05) indicated that the relationship between treatments was not the same at each time of sacrifice. Although statistical analysis of the histomorphometric data showed a similar results for the treated and control groups. But histological analysis showed complete filling of the surgical defect throughout its extent was only for the group treated with Plumbum met.Conclusion: The study demonstrated that for repair of surgical defects in rat mandibles Plumbum met. 30c and control did not differ significantly in histomorphometric terms. Homeopathy (2009) 98, 92-96.

Effects of mechanical cycling on the bonding of zirconia and fiber posts to human root dentin

Purpose: To evaluate the effect of cyclical mechanical loading on the bond strength of a fiber and a zirconia post bonded to root dentin.Materials and Methods: Forty single-rooted human teeth (maxillary incisors and canines) were sectioned, and the root canals were prepared at 12 mm. Twenty randomly seleced specimens received a quartz fiber post (FRC) (D.T. Light-Post) and 20 others received a zirconia post (ZR) (Cosmopost). The posts were resin luted (All Bond 2 + resin cement Duo-link) and each specimen was embedded in epoxy resin inside a PVC cylinder. Ten specimens with FRC post and 10 specimens with ZR post were submitted to fatigue testing (2,000,000 cycles; load: 50 N; angle of 45 degrees; frequency: 8 Hz), while the other 20 specimens were not fatigued. Thus, 4 groups were formed: G1: FRC+O cycles; G2: FRC+2,000,000 cycles; G3: ZR+O cycles; G4: ZR+2,000,000 cycles. Later, the specimens were cut perpendicular to their long axis to form 2-mm-thick disk-shaped samples (4 sections/specimen), which were submitted to the push-out test (1 mm/min). The mean bond strength values (MPa) were calculated for each tooth (n = 10) and data were submitted to statistical analysis (alpha = 0.05).Results: Two-way ANOVA revealed that the bond strength was significantly affected by mechanical cycling (p = 0.0014) and root post (p = 0.0325). The interaction was also statistically significant (p = 0.0010). Tukey's test showed that the mechanical cycling did not affect the bonding of FRC to root dentin, while fatigue impaired the bonding of zirconium to root dentin.Conclusion: (1) the bond strength of the FRC post to root dentin was not reduced after fatigue testing, whereas the bonding of the zirconia post was significantly affected by the fatigue. (2) Cyclical mechanical loading appears to damage the bond strength of the rigid post only.

Effect of Acid Neutralization and Mechanical Cycling on the Microtensile Bond Strength of Glass-ceramic Inlays

Objectives: To evaluate the hypothesis that a process of hydrofluoric acid precipitate neutralization and fatigue load cycling performed on human premolars restored with ceramic inlays had an influence on microtensile bond strength results (MTBS). Methods: MOD inlay preparations were performed in 40 premolars (with their roots embedded in acrylic resin). Forty ceramic restorations were prepared using glass-ceramic (IPS Empress). The inner surfaces of all the restorations were etched with 10% hydrofluoric acid for 60 seconds, rinsed with water and dried. The specimens were divided into two groups (N=20): 1-without neutralization; 2-with neutralization. All the restorations were silanized and adhesively cemented (self-curing and self-etching luting composite system, Multilink). Ten premolars from each group were submitted to mechanical cycling (1,400,000 cycles, 50N, 37 degrees C). After cycling, the samples were sectioned to produce non-trimmed beam specimens (vestibular dentin-restoration-lingual dentin set), which were submitted to microtensile testing. Results: Bond strength was significantly affected by the surface treatment (p<0.0001) (no neutralization > neutralization) and mechanical cycling (p<0.0001) (control > cycling) (2-way ANOVA and Tukey test, alpha=.05). Conclusion: Hydrofluoric acid precipitate neutralization appears to significantly damage the resin bond to glass-ceramic and should not be recommended. The clinical simulation of the specimens, by using mechanical cycling, is important when evaluating the ceramic-dentin bond.

Effect of dental surface treatment with Nd:YAG and Er:YAG lasers on bond strength of resin composite to recently bleached enamel

The aim of this work is to evaluate the effect of surface treatment with Er:YAG and Nd:YAG lasers on resin composite bond strength to recently bleached enamel. In this study, 120 bovine incisors were distributed into two groups: group C: without bleaching treatment; group B: bleached with 35% hydrogen peroxide. Each group was divided into three subgroups: subgroup N: without laser treatment; subgroup Nd: irradiation with Nd:YAG laser; subgroup Er: irradiation with Er:YAG laser. The adhesive system (Adper Single Bond 2) was then applied and composite buildups were constructed with Filtek Supreme composite. The teeth were sectioned to obtain enamel-resin sticks (1 x 1 mm) and submitted to microtensile bond testing. The data were statistically analyzed by the ANOVA and Tukey tests. The bond strength values in the bleached control group (5.57 MPa) presented a significant difference in comparison to the group bleached and irradiated with Er:YAG laser (13.18 MPa) or Nd:YAG (25.67 MPa). The non-bleached control group presented mean values of 30.92 MPa, with statistical difference of all the others groups. The use of Nd:YAG and Er:YAG lasers on bleached specimens was able to improve the bond strengths of them.

Desempenho da colhedora de milho Penha CLM-350: parte III - danos mecânicos

Cm vistas a estudar o efeito do sistema de debulhamento na qualidade dos grãos de milho, realizou-se o presente trabalho, onde foram estudados os danos mecânicos sofridos pelos grãos, bem como os danos mecânicos invisíveis, evidenciados pelos testes de germinação. Nos diversos tratamentos estudados, determinou-se a porcentagem de umidade presente nos grãos de milho. Definiu-se a velocidade periférica do debulhador, pelo diâmetro (300 mm) do mesmo e as rotações, para os diversos tratamentos. O delineamento experimental foi de blocos ao acaso com 5 tratamentos e 6 repetições onde foram estudados os valores percentuais de grãos inteiros e quebrados, os teores de umidade correspondentes e os valores de germinação através da análise de variância. Empregou-se o teste F aos níveis de 1% e 5% de probabilidade e o teste Tukey para comparação entre as médias. da análise pode-se concluir que em relação ao teor de umidade dos grãos, os tratamentos não diferiram estatisticamente.

Treatment of snoring and sleep apnea syndrome with a removable mandibular advancement device in patients without TMD

INTRODUCTION: Among the sleep disorders reported by the American Academy of Sleep, the most common is obstructive sleep apnea-hypopnea syndrome (OSAHS), which is caused by difficulties in air passage and complete interruption of air flow in the airway. This syndrome is associated with increased morbidity and mortality in apneic individuals. OBJECTIVE: It was the objective of this paper to evaluate a removable mandibular advancement device as it provides a noninvasive, straightforward treatment readily accepted by patients. METHODS: In this study, 15 patients without temporomandibular disorders (TMD) and with excessive daytime sleepiness or snoring were evaluated. Data were collected by means of: Polysomnography before and after placement of an intraoral appliance, analysis of TMD signs and symptoms using a patient history questionnaire, muscle and TMJ palpation. RESULTS: After treatment, the statistical analysis (t-test, and the before and after test) showed a mean reduction of 77.6% (p=0.001) in the apnea-hypopnea index, an increase in lowest oxyhemoglobin saturation (p=0.05), decrease in desaturation (p=0.05), decrease in micro-awakenings or EEG arousals (p=0.05) and highly significant improvement in daytime sleepiness (p=0.005), measured by the Epworth Sleepiness Scale. No TMD appeared during the monitoring period. CONCLUSION: The oral device developed in this study was considered effective for mild to moderate OSAHS.

Relationship between temporomandibular disorders and orthodontic treatment: a literature review

OBJETIVO: revisar a literatura mais atual, dos últimos 15 anos, em busca de estudos clínicos que relatem a relação entre a disfunção temporomandibular (DTM) e o tratamento ortodôntico e/ou a má oclusão. A intenção foi verificar se o tratamento ortodôntico aumentaria o aparecimento de sinais e sintomas de DTM, e se o tratamento ortodôntico seria um recurso para o tratamento ou prevenção dos sinais e sintomas de DTM. MÉTODOS: artigos dos tipos revisão de literatura, editorial, carta, estudo experimental em animais e comunicação foram excluídos dessa revisão. Foram incluídos artigos prospectivos, longitudinais, caso-controle ou retrospectivo com amostra maior, com relevante análise estatística. Estudos que abordassem deformidades e síndromes craniofaciais e tratamento por cirurgia ortognática também foram excluídos, bem como aqueles que relatassem apenas a associação entre má oclusão e DTM. RESULTADOS: foram encontrados 20 artigos relacionando Ortodontia à DTM, segundo os critérios adotados. Os estudos, então, associando sinais e sintomas de DTM ao tratamento ortodôntico apresentaram resultados heterogêneos. Alguns encontraram efeitos positivos do tratamento ortodôntico para os sinais e sintomas de DTM; entretanto, nenhum deles apresentou diferença estatisticamente significativa. CONCLUSÕES: todos os estudos citados nessa revisão de literatura relataram que o tratamento ortodôntico não forneceu risco ao desenvolvimento de sinais e sintomas de DTM, independentemente da técnica utilizada para tratamento, da exodontia ou não de pré-molares e do tipo de má oclusão previamente apresentada pelo paciente. Alguns estudos realizados com acompanhamento em longo prazo concluíram que o tratamento ortodôntico não seria preventivo ou uma modalidade de tratamento para DTM.

Start-up of horizontal anaerobic reactors with sludge blanket and fixed bed for wastewater treatment from coffee processing by wet method

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Delayed results of treatment of paracoccidioidomycosis with amphotericin B plus sulfamides versus amphotericin B alone

Os Autores avaliam tardiamente dois grupos de doentes de paracoccidioidomicose. Ambos foram tratados com anfotericina B, tendo um deles feito tratamento de manutenção com sulfamídicos. Através de análises estatísticas comprovam a maior eficácia do tratamento, quando se faz a manutenção com sulfamídicos.

Longitudinal clinical evaluation of adjunct minocycline in the treatment of chronic periodontitis

Background: the clinical benefits of minocycline in combination with thorough scaling and root planing (SRP) have been examined in multicenter studies. The aim of this longitudinal investigation was to evaluate the clinical response to scaling and root planing combined with the use of locally delivered minocycline microspheres for 720 days in individuals with advanced chronic periodontitis.Methods: A total of 26 individuals aged 26 to 69 years (mean: 46.8 +/- 12.1 years) were included in this double-blind randomized clinical trial. After randomization, 13 individuals were selected for the test group (TG) and treated with SRP plus subgingival minocycline at baseline and 90, 180, and 270 days, and 13 individuals were selected for the control group (CG) and received SRP plus vehicle at the same time-points. Two homologous sites with probing depth (PD) >= 6 mm were chosen in each subject. To evaluate the clinical response after treatment, PD, plaque index (PI), and gingival index (GI) were assessed at baseline and 90, 180, 270, 360, and 720 days.Results: No statistical differences were found between test and control groups in relation to PD at the different timepoints. The mean values of PD demonstrated a higher reduction in the test group at 270 and 360 days. No statistical differences were observed at 90, 180, and 720 days between TG and CG (P < 0.05; Wilcoxon test). There were no statistically significant differences between TG and CG concerning PI and GI (P < 0.05; analysis of variance and t test) at all evaluated timepoints.Conclusion: Our findings demonstrated that both therapies reduced mean PD from 90 to 360 days; however, SRP combined with the use of subgingival minocycline showed a higher reduction at 270 and 360 days following therapy.