979 resultados para STATISTICAL-ANALYSIS
Resumo:
This study has been developed for the European Beach Volleyball Championship in 2005. The video-recorded analysis was held using Sportcode Pro v.8.5.2 software. The aim of study was to determine the types of serve used, depending on the time of the set in which they occur. Quantitative analysis with a sample of 10 players that make up 5 teams with a total of four meetings with a total of 327 serves analyzed. The serves were classified depending on the period which they occurred, the period being 1 (items 1 to 7), period 2 (from point 8 to 14) and period 3 (point 15 to 21). he statistical analysis was conducted using the statistical software SPSS 19, Chi-square test established significant differences between the different types of serve for period 1 and 2 (p<0.05), but no significant differences were established in the period 3 to floating serve and power jump (p>0.05). The results showed a decrease of using a serve with jump power at period 1 (89.7%) compared to the period 3 (27.3%), while the floating and floating serve jump respectively increase at period 1 (6.3% -4%) in the period 3 (23.4% -49.4%).
Resumo:
Atomic contacts made of ferromagnetic metals present zero-bias anomalies in the differential conductance due to the Kondo effect. These systems provide a unique opportunity to perform a statistical analysis of the Kondo parameters in nanostructures since a large number of contacts can be easily fabricated using break-junction techniques. The details of the atomic structure differ from one contact to another so a large number of different configurations can be statistically analyzed. Here we present such a statistical analysis of the Kondo effect in atomic contacts made from the ferromagnetic transition metals Ni, Co, and Fe. Our analysis shows clear differences between materials that can be understood by fundamental theoretical considerations. This combination of experiments and theory allows us to extract information about the origin and nature of the Kondo effect in these systems and to explore the influence of geometry and valence in the Kondo screening of atomic-sized nanostructures.
Resumo:
The aim of this study is to analyse the physical and physiological factors in soccer training at different categories of training. The participants were 30 soccer players of 8-aside soccer in the under 10’s age group (9.93±0.25 years) who participated in the under 10 Provincial Tournament in Alicante. During training, the variables of covered distance, heart rate, speed (average and maximum values) as well as the methodology used and position were registered. After the statistical analysis and its related discussion, it was concluded that the players do not show differences in the covered total distance in relation to the category. Notwithstanding, there are differences with regards to speed and heart rate, which are caused by the greater physical development of the players in comparison to the under10’s age group category. Regarding the methodology employed, it is worth stressing that the coaches used, to a greater extend, the global method, followed by the mixed method.
Resumo:
This thesis explores the role of multimodality in language learners’ comprehension, and more specifically, the effects on students’ audio-visual comprehension when different orchestrations of modes appear in the visualization of vodcasts. Firstly, I describe the state of the art of its three main areas of concern, namely the evolution of meaning-making, Information and Communication Technology (ICT), and audio-visual comprehension. One of the most important contributions in the theoretical overview is the suggested integrative model of audio-visual comprehension, which attempts to explain how students process information received from different inputs. Secondly, I present a study based on the following research questions: ‘Which modes are orchestrated throughout the vodcasts?’, ‘Are there any multimodal ensembles that are more beneficial for students’ audio-visual comprehension?’, and ‘What are the students’ attitudes towards audio-visual (e.g., vodcasts) compared to traditional audio (e.g., audio tracks) comprehension activities?’. Along with these research questions, I have formulated two hypotheses: Audio-visual comprehension improves when there is a greater number of orchestrated modes, and students have a more positive attitude towards vodcasts than traditional audios when carrying out comprehension activities. The study includes a multimodal discourse analysis, audio-visual comprehension tests, and students’ questionnaires. The multimodal discourse analysis of two British Council’s language learning vodcasts, entitled English is GREAT and Camden Fashion, using ELAN as the multimodal annotation tool, shows that there are a variety of multimodal ensembles of two, three and four modes. The audio-visual comprehension tests were given to 40 Spanish students, learning English as a foreign language, after the visualization of vodcasts. These comprehension tests contain questions related to specific orchestrations of modes appearing in the vodcasts. The statistical analysis of the test results, using repeated-measures ANOVA, reveal that students obtain better audio-visual comprehension results when the multimodal ensembles are constituted by a greater number of orchestrated modes. Finally, the data compiled from the questionnaires, conclude that students have a more positive attitude towards vodcasts in comparison to traditional audio listenings. Results from the audio-visual comprehension tests and questionnaires prove the two hypotheses of this study.
Resumo:
Objective To provide 2-year clinical- and patient-oriented data with regard to mandibular overdenture assisted by 2 immediately loaded unsplinted implants. Material and methods In this pre-post design, Phase-I clinical trial, 18 edentate individuals (62.4 ± 7.7 years) received a new set of complete denture. Then, following standard procedures, 3 threaded implants (OsseoSpeed TX™, Dentsply Implants, Mölndal, Sweden) were placed in the mandible in each patient, and locator abutments (Zest Anchors LLC, Escondido, U.S.A.) were inserted on the right and left side implants. The midline implant served as a control for within-patient comparison. The immediate loading was conducted within 24 h of surgery. Data were collected at baseline (T0), 12 (T1) and 24 (T2) months after immediate loading. The clinical outcomes included implant survival rate, crestal bone level changes and implant stability. These criteria were assessed through clinical and radiographic examinations as well as resonance frequency analysis. Patient-centered outcomes included patient satisfaction and oral health-related quality of life measured using validated questionnaires. Brunner-Langer approach was used for statistical analysis. Results Implant survival rate for immediate loaded implants was 91.7% at 2-year follow-up. None of the unloaded implants failed. There was no statistically significant difference at baseline and follow-ups with regard to clinical outcomes between loaded and unloaded implants. Patient satisfaction and quality of life improved (p < 0.0001) from baseline to 2-year follow-up. Conclusion Immediate loading protocol did not negatively affect clinical outcomes, satisfaction and quality of life of patients wearing 2-unsplinted-implant mandibular overdenture for 2 years. This conclusion requires confirmation by randomized control trials. Clinical significance statement Mandibular overdenture assisted by two immediately-loaded unsplinted implants is successful treatment based on 2-year clinical and patient-based outcomes.
Resumo:
Objective To provide 2-year clinical- and patient-oriented data with regard to mandibular overdenture assisted by 2 immediately loaded unsplinted implants. Material and methods In this pre-post design, Phase-I clinical trial, 18 edentate individuals (62.4 ± 7.7 years) received a new set of complete denture. Then, following standard procedures, 3 threaded implants (OsseoSpeed TX™, Dentsply Implants, Mölndal, Sweden) were placed in the mandible in each patient, and locator abutments (Zest Anchors LLC, Escondido, U.S.A.) were inserted on the right and left side implants. The midline implant served as a control for within-patient comparison. The immediate loading was conducted within 24 h of surgery. Data were collected at baseline (T0), 12 (T1) and 24 (T2) months after immediate loading. The clinical outcomes included implant survival rate, crestal bone level changes and implant stability. These criteria were assessed through clinical and radiographic examinations as well as resonance frequency analysis. Patient-centered outcomes included patient satisfaction and oral health-related quality of life measured using validated questionnaires. Brunner-Langer approach was used for statistical analysis. Results Implant survival rate for immediate loaded implants was 91.7% at 2-year follow-up. None of the unloaded implants failed. There was no statistically significant difference at baseline and follow-ups with regard to clinical outcomes between loaded and unloaded implants. Patient satisfaction and quality of life improved (p < 0.0001) from baseline to 2-year follow-up. Conclusion Immediate loading protocol did not negatively affect clinical outcomes, satisfaction and quality of life of patients wearing 2-unsplinted-implant mandibular overdenture for 2 years. This conclusion requires confirmation by randomized control trials. Clinical significance statement Mandibular overdenture assisted by two immediately-loaded unsplinted implants is successful treatment based on 2-year clinical and patient-based outcomes.
Resumo:
Federal Highway Administration, Office of Safety and Traffic Operations, Washington, D.C.
Resumo:
National Highway Traffic Safety Administration, National Center for Statistics and Analysis, Washington, D.C.
Resumo:
Mode of access: Internet.
Resumo:
"In any comprehensive research project, there are essentially five steps. First, one starts with a literature review with regard to a particular research question. Second, one seeks to develop a theory. Third, the research question is finalized, frequently in the form of a hypothesis to be tested. Fourth, data are collected. Fifth, the subject matter of this paper, the data are analyzed in order to come to a resolution of the research question. There are two general approaches to analyzing research data. If the data were gathered concerning a 'research question,' a description of the data may be sufficient. However, if the data were gathered to accept or reject a formal hypothesis, statistical analysis is usually in order. This paper briefly surveys the principal data analysis methodologies that are available."
Resumo:
Includes bibliographical references.
Resumo:
Two different slug test field methods are conducted in wells completed in a Puget Lowland aquifer and are examined for systematic error resulting from water column displacement techniques. Slug tests using the standard slug rod and the pneumatic method were repeated on the same wells and hydraulic conductivity estimates were calculated according to Bouwer & Rice and Hvorslev before using a non-parametric statistical test for analysis. Practical considerations of performing the tests in real life settings are also considered in the method comparison. Statistical analysis indicates that the slug rod method results in up to 90% larger hydraulic conductivity values than the pneumatic method, with at least a 95% certainty that the error is method related. This confirms the existence of a slug-rod bias in a real world scenario which has previously been demonstrated by others in synthetic aquifers. In addition to more accurate values, the pneumatic method requires less field labor, less decontamination, and provides the ability to control the magnitudes of the initial displacement, making it the superior slug test procedure.
Resumo:
beta2-Laminin is important for the formation of neuromuscular junctions in vertebrates. Previously, we have inactivated the gene that encodes for beta2-laminin in mice and observed predominantly prejunctional structural defects. In this study, we have used both intra- and extracellular recording methods to investigate evoked neurotransmission in beta2-laminin-deficient mice, from postnatal day 8 (P8) through to day 18(P18). Our results confirmed that there was a decrease in the frequency of spontaneous release, but no change in the postjunctional response to such release. Analysis of evoked neurotransmission showed an increase in the frequency of stimuli that failed to elicit an evoked postjunctional response in the mutants compared to litter mate controls, resulting in a 50% reduction in mean quantal content at mutant terminals. Compared to littermate controls, beta2-laminin-deficient terminals showed greater synaptic depression when subjected to high frequency stimulation. Furthermore, the paired pulse ratio of the first two stimuli was significantly lower in beta2-laminin mutant terminals. Statistical analysis of the binomial parameters of release showed that the decrease in quantal content was due to a decrease in the number of release sites without any significant change in the average probability of release. This suggestion was supported by the observation of fewer synaptic vesicle protein 2 (SV2)-positive varicosities in beta2-laminin-deficient terminals and by ultrastructural observations showing smaller terminal profiles and increased Schwann cell invasion in beta2-laminin mutants; the differences between beta2-laminin mutants and wild-type mice were the same at both P8 and P18. From these results we conclude that beta2-laminin plays a role in the early structural development of the neuromuscular junction. We also suggest that transmitter release activity may act as a deterrent to Schwarm cell invasion in the absence of beta2-laminin.
Resumo:
An understanding of inheritance requires comprehension of genetic processes at all levels, from molecules to populations. Frequently genetics courses are separated into molecular and organismal genetics and students may fail to see the relationships between them. This is particularly true with human genetics, because of the difficulties in designing experimental approaches which are consistent with ethical restrictions, student abilities and background knowledge, and available time and materials. During 2005 we used analysis of single nucleotide polymorphisms (SNPs) in two genetic regions to enhance student learning and provide a practical experience in human genetics. Students scanned databases to discover SNPs in a gene of interest, used software to design PCR primers and a restriction enzyme based assay for the alleles, and carried out an analysis of the SNP on anonymous individual and family DNAs. The project occupied eight to ten hours per week for one semester, with some time spent in the laboratory and some spent in database searching, reading and writing the report. In completing their projects, students acquired a knowledge of Mendel’s first law (through looking at inheritance patterns), Mendel’s second law and the exceptions (the concepts of linkage and linkage disequilibrium), DNA structure (primer design and restriction enzyme analysis) and function (SNPs in coding and non-coding regions), population genetics and the statistical analysis of allele frequencies, genomics, bioinformatics and the ethical issues associated with the use of human samples. They also developed skills in presentation of results by publication and conference participation. Deficiencies in their understanding (for example of inheritance patterns, gene structure, statistical approaches and report writing) were detected and guidance given during the project. SNP analysis was found to be a powerful approach to enhance and integrate student understanding of genetic concepts.
Resumo:
We investigate the feasibility of simultaneous suppressing of the amplification noise and nonlinearity, representing the most fundamental limiting factors in modern optical communication. To accomplish this task we developed a general design optimisation technique, based on concepts of noise and nonlinearity management. We demonstrate the immense efficiency of the novel approach by applying it to a design optimisation of transmission lines with periodic dispersion compensation using Raman and hybrid Raman-EDFA amplification. Moreover, we showed, using nonlinearity management considerations, that the optimal performance in high bit-rate dispersion managed fibre systems with hybrid amplification is achieved for a certain amplifier spacing – which is different from commonly known optimal noise performance corresponding to fully distributed amplification. Required for an accurate estimation of the bit error rate, the complete knowledge of signal statistics is crucial for modern transmission links with strong inherent nonlinearity. Therefore, we implemented the advanced multicanonical Monte Carlo (MMC) method, acknowledged for its efficiency in estimating distribution tails. We have accurately computed acknowledged for its efficiency in estimating distribution tails. We have accurately computed marginal probability density functions for soliton parameters, by numerical modelling of Fokker-Plank equation applying the MMC simulation technique. Moreover, applying a powerful MMC method we have studied the BER penalty caused by deviations from the optimal decision level in systems employing in-line 2R optical regeneration. We have demonstrated that in such systems the analytical linear approximation that makes a better fit in the central part of the regenerator nonlinear transfer function produces more accurate approximation of the BER and BER penalty. We present a statistical analysis of RZ-DPSK optical signal at direct detection receiver with Mach-Zehnder interferometer demodulation