Valutazione dell'effetto del mezzo temprante sulle tensioni residue e proprieta meccaniche della lega di alluminio Al-Si7-Mg

L’alluminio, grazie alla sua bassa temperatura di fusione e all’elevata fluidità di molte leghe, è uno dei metalli più versatili in fonderia. Per ottenere il massimo delle proprietà resistenziali, le leghe che lo permettono sono sottoposte a trattamento termico. Questo, però, in componenti geometricamente complessi può far insorgere tensioni residue che inficeranno la resistenza del materiale durante la sua messa in esercizio. Gli obiettivi della presente ricerca sono stati: la valutazione dell’incidenza del mezzo temprante usato durante il trattamento termico sulle tensioni residue che si sviluppano nella lega AlSi7Mg e la definizione di come questo potesse essere modificato per ridurre le tensioni senza peggiorare le proprietà resistenziali del materiale. Per tale ragione sono state eseguite prove di trattamento termico, analisi microstrutturali e test di durezza su campioni estratti direttamente da getti colati in sabbia.

Determinazione delle tensioni residue in componenti metallici sottili mediante "incremental hole drilling"

La vita di un aeromobile è un elemento importante sia per quanto riguarda la sicurezza del payload, che da un punto di vista economico, a causa delle spese di manutenzione/rinnovamento della flotta che una compagnia aerea deve affrontare. Gli elementi costitutivi di un aeromobile sono soggetti a diverse tipologie di carichi, alcuni dei quali ciclici come la pressurizzazione/depressurizzazione della fusoliera; tali carichi, nel lungo periodo, possono provocare la nascita e la propagazione di eventuali cricche, le quali possono portare alla rottura del componente stesso causando gravi incidenti. Il legame tra tensioni residue e nascita/crescita delle cricche ha portato allo sviluppo di tecniche per contrastare questo fenomeno, come il processo del LSP. Per la misura delle tensioni residue esistono già normative di riferimento, le quali però non trattano componenti metallici di piccolo spessore mentre i pannelli di fusoliera rientrano in questa categoria. Scopo di questa tesi è quello di studiare una variante della tecnica HD adatta a valutare le tensioni residue in componenti metallici di piccolo spessore e confrontare i risultati con quelli ottenuti con la tecnica XRD. L’idea di partenza è l’implementazione di un supporto posteriore in resina che simuli la presenza di uno spessore maggiore.

On the experimental behaviour of a silty sand and its modelling through Generalized Plasticity.

La tesi contiene uno studio sperimentale sul comportamento di una sabbia limosa del sottosuolo della laguna veneta e propone un'interpretazione dei risultati sperimentali ottenuti alla luce dei presupposti teorici di un approccio costitutivo avanzato noto come "Plasticità Generalizzata". Il programma sperimentale è consistito nella realizzazione di prove edometriche e prove triassiali su campioni di sabbia provenienti dal sito di Treporti, situato in prossimità della bocca di Lido. La risposta sperimentale, in termini di modulo volumetrico, è stata messa a confronto con i risultati di alcuni studi di letteratura, con particolare riferimento a quelli condotti da Jefferies & Been (2000). La disponibilità di prove di compressione edometrica realizzate nella cella K0 e la conseguente possibilità di valutare il coefficiente di spinta a riposo ha permesso di interpretare le prove in termini di tensione media efficace p' e di verificare l'applicabilità al caso in esame degli approcci di letteratura disponibili, spesso sviluppati a partire da prove di compressione isotropa effettuate in cella triassiale. Il comportamento tenso-deformativo osservato è stato successivamente simulato con un modello costitutivo per sabbie sviluppato nell'ambito della Plasticità Generalizzata. In particolare sono state utilizzate tre diverse formulazioni, che costituiscono un avanzamento dell'iniziale modello costitutivo proposto da Pastor, Zienkiewicz e Chan (1990), basate sull'uso di un parametro di stato del materiale definito rispetto alle condizioni di Stato Critico. Dal confronto tra previsioni del modello e risposta sperimentale è stato possibile individuare la formulazione che meglio simula il comportamento meccanico osservato sia in compressione edometrica sia in prove di taglio ed è stato proposto un set di parametri costitutivi ritenuti rappresentativi del terreno studiato.

A residue close to ?1 loop F disrupts modulation of GABAA receptors by benzodiazepines while their binding is maintained

Benzodiazepines act at the major isoforms of GABA type A receptors where they potentiate the current evoked by the agonist GABA. The underlying mechanism of this potentiation is poorly understood, but hypothesized to be related to the mechanism that links agonist binding to channel opening in these ligand activated ion channels. The loop F of the ?(1) and the ?(2) subunit have been implicated in channel gating, and loop F of the ?(2) subunit in the modulation by benzodiazepines. We have identified the conservative point mutation Y168F located N-terminally of loop F in the ?(1) subunit that fails to affect agonist properties. Interestingly, it disrupts modulation by benzodiazepines, but leaves high affinity binding to the benzodiazepine binding site intact. Modulation by barbiturates and neurosteroids is also unaffected. Residue ?(1) Y168 is not located either near the binding pockets for GABA, or for benzodiazepines, or close to the loop F of the ?(2) subunit. Our results support the fact, that broader regions of ligand gated receptors are conformationally affected by the binding of benzodiazepines. We infer that also broader regions could contribute to signaling from GABA agonist binding to channel opening.

Mutagenesis and computer modeling studies of a GPCR conserved residue W5.43(194) in ligand recognition and signal transduction for CB2 receptor

W5.43(194), a conserved tryptophan residue among G-protein coupled receptors (GPCRs) and cannabinoid receptors (CB), was examined in the present report for its significance in CB2 receptor ligand binding and adenylyl cyclase (AC) activity. Computer modeling postulates that this site in CB2 may be involved in the affinity of WIN55212-2 and SR144528 through aromatic contacts. In the present study, we reported that a CB2 receptor mutant, W5.43(194)Y, which had a tyrosine (Y) substitution for tryptophan (W), retained the binding affinity for CB agonist CP55940, but reduced binding affinity for CB2 agonist WIN55212-2 and inverse agonist SR144528 by 8-fold and 5-fold, respectively; the CB2 W5.43(194)F and W5.43(194)A mutations significantly affect the binding activities of CP55940, WIN55212-2 and SR144528. Furthermore, we found that agonist-mediated inhibition of the forskolin-induced cAMP production was dramatically diminished in the CB2 mutant W5.43(194)Y, whereas W5.43(194)F and W5.43(194)A mutants resulted in complete elimination of downstream signaling, suggesting that W5.43(194) was essential for the full activation of CB2. These results indicate that both aromatic interaction and hydrogen bonding are involved in ligand binding for the residue W5.43(194), and the mutations of this tryptophan site may affect the conformation of the ligand binding pocket and therefore control the active conformation of the wild type CB2 receptor. W5.43(194)Y/F/A mutations also displayed noticeable enhancement of the constitutive activation probably attributed to the receptor conformational changes resulted from the mutations.

Evaluation of the chemical residue monitoring in animal-derived products in Switzerland

This paper evaluates whether the Swiss monitoring programme for foreign substances in animal products fulfils basic epidemiological quality requirements, and identifies possible sources of bias in the selection of samples. The sampling was analysed over a 4-year period (2002-05). The sampling frame in 37 participating abattoirs covered 51% of all slaughtered pigs, 73% of calves, 68% of beef and 36% of cows. The analysis revealed that some sub-populations as defined by the region of origin were statistically over-represented while others were under-represented. The programme that is in accordance with European Union requirements contained some relevant bias. Patterns of under-sampled regions characterized by management type differences were identified. This could lead to an underestimate of the number of contaminated animals within the programme. Although the current sampling was stratified and partially risk-based, its efficiency could be improved by adopting a more targeted approach.

Clinical field trial examining an implant with a sand-blasted, acid-etched surface

BACKGROUND: Conventionally, endosseous dental implants have required 3 to 6 months of uninterrupted healing based on observations for dental implants that were characterized by a relatively smooth machined surface. Many studies have since demonstrated that implants with a roughened surface resulted in greater bone apposition, earlier bone contact, and a stronger bond between the implant and the bone, suggesting that implants with roughened surfaces could be loaded earlier than 3 to 6 months. Formal clinical studies confirmed that implants with rough surfaces can have abutments placed and be loaded occlusally as early as 6 weeks postplacement. The purpose of this prospective, human clinical investigation was to evaluate a large number of implants with a specific rough surface (sand-blasted acid-etched [SLA]) placed in everyday practice under routine private-practice conditions. METHODS: A prospective, multicenter, human clinical observational study was initiated with the goal of recruiting a minimum of 500 patients and 800 implants. The implants were to be placed and restored in predominantly private-practice settings around the world. Ninety-two practitioners in 16 countries agreed to participate, and 86 followed the study design. Patients had to be in good health, have sufficient bone to encase the implant, and agree to return for recall appointments. Exclusion criteria included heavy smoking (>10 cigarettes a day) and bone augmentation procedures at the implant site. All implants were two-piece (an abutment was to be placed after 6 weeks of healing) and were characterized by the presence of a transmucosal polished collar. Each implant had an SLA surface. All implants were positioned using a non-submerged (single-stage) surgical technique. Survival and success rates were calculated by life-table analyses. RESULTS: A total of 706 patients were enrolled and 1,406 implants were placed. In the final analyses, 590 patients with 990 implants (70.4% of those enrolled) met all inclusion criteria, including placement of an abutment and provisional restoration within 63 days of surgical placement. The majority of implants were 10 and 12 mm long (78.7%) and were placed in type II and III bone (87%). Seventy-three percent of the implants were placed in the mandible, and 27% were placed in the maxilla. The cumulative survival rate was 99.56% at 3 years and 99.26% at 5 years. The overall success rate was 99.12% at 3 years and 97.38% after 5 years. CONCLUSIONS: Under private-practice conditions, implants with an SLA surface could be placed and restored predictably within 6 to 8 weeks. Data from this prospective, multicenter, human observational study reinforced the results of more formal clinical studies and demonstrated that implants with the SLA surface can be restored in patients in approximately half of the time of conventional healing periods.

Effective water treatment for rural communities in Suriname : a comparison of point-of-use ceramic filters and centralized treatment with sand filters

For countless communities around the world, acquiring access to safe drinking water is a daily challenge which many organizations endeavor to meet. The villages in the interior of Suriname have been the focus of many improved drinking water projects as most communities are without year-round access. Unfortunately, as many as 75% of the systems in Suriname fail within several years of implementation. These communities, scattered along the rivers and throughout the jungle, lack many of the resources required to sustain a centralized water treatment system. However, the centralized system in the village of Bendekonde on the Upper Suriname River has been operational for over 10 years and is often touted by other communities. The Bendekonde system is praised even though the technology does not differ significantly from other failed systems. Many of the water systems that fail in the interior fail due to a lack of resources available to the community to maintain the system. Typically, the more complex a system becomes, so does the demand for additional resources. Alternatives to centralized systems include technologies such as point-of-use water filters, which can greatly reduce the necessity for outside resources. In particular, ceramic point-of-use water filters offer a technology that can be reasonably managed in a low resource setting such as that in the interior of Suriname. This report investigates the appropriateness and effectiveness of ceramic filters constructed with local Suriname clay and compares the treatment effectiveness to that of the Bendekonde system. Results of this study showed that functional filters could be produced from Surinamese clay and that they were more effective, in a controlled laboratory setting, than the field performance of the Bendekonde system for removing total coliform. However, the Bendekonde system was more successful at removing E. coli. In a life-cycle assessment, ceramic water filters manufactured in Suriname and used in homes for a lifespan of 2 years were shown to have lower cumulative energy demand, as well as lower global warming potential than a centralized system similar to that used in Bendekonde.

Will Whole-Tree Harvest of Jack Pine (Pinus banksiana) deplete soil nutrients in low-productivity sand soils?

In 2009 and 2010 a study was conducted on the Hiawatha National Forest (HNF) to determine if whole-tree harvest (WTH) of jack pine would deplete the soil nutrients in the very coarse-textured Rubicon soil. WTH is restricted on Rubicon sand in order to preserve the soil fertility, but the increasing construction of biomass-fueled power plants is expected to increase the demand for forest biomass. The specific objectives of this study were to estimate biomass and nutrient content of above- and below-ground tree components in mature jack pine (Pinus banksiana) stands growing on a coarse-textured, low-productivity soil, determine pools of total C and N and exchangeable soil cations in Rubicon sand, and to compare the possible impacts of conventional stem-only harvest (CH) and WTH on soil nutrient pools and the implications for productivity of subsequent rotations. Four even-aged jack pine stands on Rubicon soil were studied. Allometric equations were used to estimate above-ground biomass and nutrients, and soil samples from each stand were taken for physical and chemical analysis. Results indicate that WTH will result in cation deficits in all stands, with exceptionally large Ca deficits occurring in two stands. Where a deficit does not occur, the cation surplus is small and, chemical weathering and atmospheric deposition is not anticipated to replace the removed cations. CH will result in a surplus of cations, and will likely not result in productivity declines during the first rotation. However even under CH, the surplus is small, and chemical weathering and atmospheric deposition will not supply enough cations for the second rotation.