Indigenous Māori values and perspectives to inform freshwater management in Aotearoa-New Zealand

In response to widespread water quality and quantity issues, the New Zealand Government has recently embarked on a number of comprehensive freshwater management reforms, developing a raft of national discussion and policy documents such as “Freshwater Reform 2013 and Beyond” and a National Policy Statement for freshwater management (NPS-FM 2014). Recent resource management reforms and amendments (RMA 2014), based on previous overarching resource management legislation (RMA 1991), set out a new approach and pathway to manage freshwater nationwide. Internationally, there is an increasing trend to engage with indigenous communities for research and collaboration, including indigenous groups as active participants in resource management decision making. What is driving this change toward more engagement and collaboration with indigenous communities is different for each country, and we document the progress and innovation made in this area in New Zealand. The indigenous rights of Māori in New Zealand are stated in the 1840 Treaty of Waitangi and in many forms of New Zealand's legislation. Local and central governments are eager to include local indigenous Māori groups (iwi/hapū) in freshwater management planning processes through meaningful engagement and collaboration. Key to the success of collaborative planning processes for Māori are enduring relationships between local government and Māori, along with adequate resourcing for all partners contributing to the collaborative process. A large number of shared governance and management models for natural resource management have emerged in New Zealand over the past 20 years, and some recent examples are reviewed. We provide some discussion to improve understanding and use of the terms used in these management models such as cogovernance, comanagement, and coplanning, and describe some of the more important frameworks and tools being developed with Māori groups (e.g., iwi/hapū), to strengthen Māori capacity in freshwater management and to support good collaborative process and planning.

The International <IR> Framework’s impact on the social and relationship disclosures in the healthcare industry

Abstract Background and Problem: The altering business world and the growing requests from stakeholders have resulted in the establishment of new reports. These are among others Sustainability reports and Integrated Reporting. On the contrary, traditional financial reports do not consider the significance of intangible assets in modern entities. The social and relationship capital has further shown to be important for firms, especially healthcare companies and pharmaceuticals, but is not as developed as other capitals within the <IR> framework and therefore not always included in annual reports. However too few disclosures within this area could lead to high liabilities. The IIRC launched the <IR> framework year 2013 as a solution, as it gives a more comprehensive view of the reporting entity. Within this framework there are six capitals: manufactured, human, financial, natural, intellectual and social and relationship.   Purpose: The purpose of this thesis is to find out how the International <IR> Framework has influenced the reporting of the social and relationship disclosures within the healthcare industry, to compare the reporting of the six medical firms chosen and to examine how the social concerns have been developed over time. Delimitations: This study is conducted over a period of three years, from year 2012 to year 2014. It only examines healthcare companies which use the International <IR> framework and it has solely focus on the social and relationship capital. All other capitals within the <IR> framework are excluded from the study. Method: This study has a qualitative research strategy and is based on information collected from published documents in form of annual reports. The annual reports from year 2010, 2011 and 2012 are used to find social and relationship disclosures and a disclosure scoreboard is used to find similarities, differences and patterns. Empirical Results and Conclusion: It has been found that the aggregated social and relationship disclosures have been reduced over time. The year followed by the release of the <IR> framework was seen to have the least disclosures and therefore conclusion was drawn that the <IR> framework had a negative influence on the social and relationship disclosures. There were also differences among the companies studied both in extent and content. The former could be linked to factors such as size and nationality and the latter could be linked to reputation preservation and legitimacy interests.

Acreditação do Laboratório de Metrologia da Frilabo para Ensaios e Calibrações em Temperaturas

O trabalho desenvolvido centrou-se na preparação da acreditação NP EN ISO/IEC 17025 do Laboratório de Metrologia da empresa Frilabo para prestação de serviços na área das temperaturas, no ensaio a câmaras térmicas e na calibração de termómetros industriais. Considerando o âmbito do trabalho desenvolvido, são abordados nesta tese conceitos teóricos sobre temperatura e incertezas bem como considerações técnicas de medição da temperatura e cálculo de incertezas. São também referidas considerações sobre os diferentes tipos de câmaras térmicas e termómetros. O texto apresenta os documentos elaborados pelo autor sobre os procedimentos de ensaio a câmaras térmicas e respetivo procedimento de cálculo da incerteza. Também estão presentes neste texto documentos elaborados pelo autor sobre os procedimentos de calibração de termómetros industriais e respetivo procedimento de cálculo da incerteza. Relativamente aos ensaios a câmara térmicas e calibração de termómetros o autor elaborou os fluxogramas sobre a metodologia da medição da temperatura nos ensaios, a metodologia de medição da temperatura nas calibrações, e respetivos cálculos de incertezas. Nos diferentes anexos estão apresentados vários documentos tais como o modelo de folha de cálculo para tratamento de dados relativos ao ensaio, modelo de folha de cálculo para tratamento de dados relativo às calibrações, modelo de relatório de ensaio, modelo de certificado de calibração, folhas de cálculo para gestão de clientes/equipamentos e numeração automática de relatórios de ensaio e certificados de calibração que cumprem os requisitos de gestão do laboratório. Ainda em anexo constam todas as figuras relativas à monitorização da temperatura nas câmara térmicas como também as figuras da disposição dos termómetros no interior das câmaras térmicas. Todas as figuras que aparecem ao longo do documento que não estão referenciadas são da adaptação ou elaboração própria do autor. A decisão de alargar o âmbito da acreditação do Laboratório de Metrologia da Frilabo para calibração de termómetros, prendeu-se com o facto de que sendo acreditado como laboratório de ensaios na área das temperaturas, a realização da rastreabilidade dos padrões de medida internamente, permitiria uma gestão de recursos otimizada e rentabilizada. A metodologia da preparação de todo o processo de acreditação do Laboratório de Metrologia da Frilabo, foi desenvolvida pelo autor e está expressa ao longo do texto da tese incluindo dados relevantes para a concretização da referida acreditação nos dois âmbitos. A avaliação de todo o trabalho desenvolvido será efetuada pelo o organismo designado IPAC (Instituto Português de Acreditação) que confere a acreditação em Portugal. Este organismo irá auditar a empresa com base nos procedimentos desenvolvidos e nos resultados obtidos, sendo destes o mais importante o Balanço da Melhor Incerteza (BMI) da medição também conhecido por Melhor Capacidade de Medição (MCM), quer para o ensaio às câmaras térmicas, quer para a calibração dos termómetros, permitindo desta forma complementar os serviços prestados aos clientes fidelizados à Frilabo. As câmaras térmicas e os termómetros industriais são equipamentos amplamente utilizados em diversos segmentos industriais, engenharia, medicina, ensino e também nas instituições de investigação, sendo um dos objetivos respetivamente, a simulação de condições específicas controladas e a medição de temperatura. Para entidades acreditadas, como os laboratórios, torna-se primordial que as medições realizadas com e nestes tipos de equipamentos ostentem confiabilidade metrológica1, uma vez que, resultados das medições inadequados podem levar a conclusões equivocadas sobre os testes realizados. Os resultados obtidos nos ensaios a câmaras térmicas e nas calibrações de termómetros, são considerados bons e aceitáveis, uma vez que as melhores incertezas obtidas, podem ser comparadas, através de consulta pública do Anexo Técnico do IPAC, com as incertezas de outros laboratórios acreditados em Portugal. Numa abordagem mais experimental, pode dizer-se que no ensaio a câmaras térmicas a obtenção de incertezas mais baixas ou mais altas depende maioritariamente do comportamento, características e estado de conservação das câmaras, tornando relevante o processo de estabilização da temperatura no interior das mesmas. A maioria das fontes de incerteza na calibração dos termómetros são obtidas pelas características e especificações do fabricante dos equipamentos, que se traduzem por uma contribuição com o mesmo peso para o cálculo da incerteza expandida (a exatidão de fabricante, as incertezas herdadas de certificados de calibração, da estabilidade e da uniformidade do meio térmico onde se efetuam as calibrações). Na calibração dos termómetros as incertezas mais baixas obtêm-se para termómetros de resoluções mais baixas. Verificou-se que os termómetros com resolução de 1ºC não detetavam as variações do banho térmico. Nos termómetros com resoluções inferiores, o peso da contribuição da dispersão de leituras no cálculo da incerteza, pode variar consoante as características do termómetro. Por exemplo os termómetros com resolução de 0,1ºC, apresentaram o maior peso na contribuição da componente da dispersão de leituras. Pode concluir-se que a acreditação de um laboratório é um processo que não é de todo fácil. Podem salientar-se aspetos que podem comprometer a acreditação, como por exemplo a má seleção do ou dos técnicos e equipamentos (má formação do técnico, equipamento que não seja por exemplo adequado à gama, mal calibrado, etc…) que vão efetuar as medições. Se não for bem feita, vai comprometer todo o processo nos passos seguintes. Deve haver também o envolvimento do todos os intervenientes do laboratório, o gestor da qualidade, o responsável técnico e os técnicos, só assim é que é possível chegar à qualidade pretendida e à melhoria contínua da acreditação do laboratório. Outro aspeto importante na preparação de uma acreditação de um laboratório é a pesquisa de documentação necessária e adequada para poder tomar decisões corretas na elaboração dos procedimentos conducentes à referida. O laboratório tem de mostrar/comprovar através de registos a sua competência. Finalmente pode dizer-se que competência é a palavra chave de uma acreditação, pois ela manifesta-se nas pessoas, equipamentos, métodos, instalações e outros aspetos da instituição a que pertence o laboratório sob acreditação.

Espionage against Poland in the Documents and Analyses of the Polish Special Services (1944 - 1989) - as Illustrated by the Intelligence Activities of the USA

The text analyses the intelligence activity against Poland in the period 1944-1989. The paper also contains a case study, i.e. an analysis of the American intelligence service activity held against Poland. While examining the research thesis, the author used the documents and analyses prepared by the Ministry of Internal Affairs. In order to best illustrate the point, the author presented a number of cases of persons who spied for the USA, which was possible thanks to the analysis of the training materials of the Ministry of Internal Affairs directed to the officers of the Security Service and the Citizens’ Militia. The text tackles the following issues: (1) to what extent did the character of the socio-political system influence the number of persons convicted for espionage against Poland in the period under examination?, (2) what was the level of interest of the foreign intelligence services in Poland before the year 1990?, (3) is it possible to indicate the specificity of the U.S. intelligence activity against Poland? 1) The analysis of data indicates that the period 1946-1956 witnessed a great number of convictions for espionage, which is often associated with the peculiar political situation in Poland of that time. Up to 1953, the countries of the Eastern bloc had reproduced the Stalin’s system, which only ceased due to the death of Stalin himself. Since then, the communist systems gradually transformed into the system of nomenklatura. Irrespective of these changes, Poland still witnessed a wave of repressions, which resulted from the threats continuously looming over the communist authorities – combating the anti-communist underground movement, fighting with the Ukrainian Insurgent Army, the Polish government-in-exile, possible revisionism of borders, social discontent related to the socio-political reforms. Hence, a great number of convictions for espionage at that time could be ascribed to purely political sentences. Moreover, equally significant was the fact that the then judicial practice was preoccupied assessing negatively any contacts and relations with foreigners. This excessive number of convictions could ensue from other criminal-law provisions, which applied with respect to the crimes against the State, including espionage. What is also important is the fact that in the Stalin’s period the judiciary personnel acquired their skills and qualifications through intensive courses in law with the predominant spirit of the theory of evidence and law by Andrey Vyshinsky. Additionally, by the decree of 1944 the Penal Code of the Polish Armed Forces was introduced; the code envisaged the increase in the number of offences classified as penalised with death penalty, whereas the high treason was subject to the military jurisdiction (the civilians were prosecuted in military courts till 1955; the espionage, however, still stood under the military jurisdiction). In 1946, there was introduced the Decree on particularly dangerous crimes in the period of the State’s recovery, which was later called a Small Penal Code. 2) The interest that foreign intelligence services expressed in relation to Poland was similar to the one they had in all countries of Eastern and Central Europe. In the case of Poland, it should be noted that foreign intelligence services recruited Polish citizens who had previously stayed abroad and after WWII returned to their home country. The services also gathered information from Poles staying in immigrant camps (e.g. in FRG). The activity of the American intelligence service on the territory of FRG and West Berlin played a key role. The documents of the Ministry of Internal Affairs pointed to the global range of this activity, e.g. through the recruitment of Polish sailors in the ports of the Netherlands, Japan, etc. In line with the development in the 1970s, espionage, which had so far concentrated on the defence and strategic sectors, became focused on science and technology of the People’s Republic of Poland. The acquisition of collaborators in academic circles was much easier, as PRL opened to academic exchange. Due to the system of visas, the process of candidate selection for intelligence services (e.g. the American) began in embassies. In the 1980s, the activity of the foreign intelligence services concentrated on the specific political situation in Poland, i.e. the growing significance of the “Solidarity” social movement. 3) The specificity of the American intelligence activity against Poland was related to the composition of the residency staff, which was the largest in comparison to other Western countries. The wide range of these activities can be proved by the quantitative data of convictions for espionage in the years 1944-1984 (however, one has to bear in mind the factors mentioned earlier in the text, which led to the misinterpretation of these data). Analysing the data and the documents prepared by the Ministry of Internal Affairs, one should treat them with caution, as, frequently, the Polish counter-intelligence service used to classify the ordinary diplomatic practice and any contacts with foreigners as espionage threats. It is clearly visible in the language of the training materials concerned with “secret service methods of the intelligence activity” as well as in the documents on operational activities of the Security Service in relation to foreigners. The level of interest the USA had in Poland was mirrored in the classification of diplomatic posts, according to which Warsaw occupied the second place (the so-called Group “B”) on the three-point scale. The CIA experienced spectacular defeats during their activity in Poland: supporting the Polish underground anti-communist organisation Freedom and Independence and the so-called Munich-Berg episode (both cases took place in the 1950s). The text focuses only on selected issues related to the espionage activities against Poland. Similarly, the analysis of the problem has been based on selected sources, which has limited the research scope - however, it was not the aim of the author to present the espionage activity against Poland in a comprehensive way. In order to assess the real threat posed by the espionage activity, one should analyse the case of persons convicted for espionage in the period 1944-1989, as the available quantitative data, mentioned in the text, cannot constitute an explicit benchmark for the scale of espionage activity. The inaccuracies in the interpretation of data and variables, which can affect the evaluation of this phenomenon, have been pointed out in the text.

The joint European Research Infrastructure Network for Coastal Observatories: Achievements and Strategy for the Future

This document is summarizing a major part of the work performed by the FP7-JERICO consortium, including 27 partner institutions, during 4 years (2011-2015). Its objective is to propose a strategy for the European coastal observation and monitoring. To do so we give an overview of the main achievements of the FP7-JERICO project. From this overview, gaps are analysed to draw some recommendations for the future. Overview, gaps and recommendation are addressed at both Hardware and Software levels of the JERICO Research Infrastructure. The main part of the document is built upon this analysis to outcome a general strategy for the future, giving priorities to be targeted and some possible funding mechanisms, but also upon discussions held in dedicated JERICO strategy workshops. This document was initiated in 2014 by the coordination team but considering the fact that an overview of the entire project and its achievement were needed to feed this strategy deliverable it couldn’t ended before the end of FP7-JERICO, April 2015. The preparation of the JERICO-NEXT proposal in summer 2014 to answer an H2020 call for proposals pushed the consortium ahead, fed deep thoughts about this strategy but the intention was to not propose a strategy only bounded by the JERICO-NEXT answer. Authors are conscious that writing JERICO-NEXT is even drawing a bias in the thoughts and they tried to be opened. Nevertheless, comments are always welcome to go farther ahead. Structure of the document The Chapter 3 introduces the need of sustained coastal observatories, from different point of view including a short description of the FP7-JERICO project. In Chapter 4, an analysis of the JERICO coastal observatory Hardware (platforms and sensors) in terms of Status at the end of JERICO, identified gaps and recommendations for further development is provided region by region. The main challenges that remain to be overcome is also summarized. Chapter 5 is dedicated the JERICO infrastructure Software (calibration, operation, quality assessment, data management) and the progress made through JERICO on harmonization of procedures and definition of best practices. Chapter 6 provides elements of a strategy towards sustainable and integrated coastal observations for Europe, drawing a roadmap for cost-effective scientific-based consolidation of the present infrastructure while maximizing the potential arising from JERICO in terms of innovation, wealth-creation, and business development. After reading the chapter 3, for who doesn’t know JERICO, any chapter can be read independently. More details are available in the JERICO final reports and its intermediate reports; all are available on the JERICO web site (www.jerico-FP7.eu) as well as any deliverable. Each chapter will list referring JERICO documents. A small bibliographic list is available at the end of this deliverable.

Corporate social responsibility reporting in the mining sector of Tanzania:(Lack of) government regulatory controls and NGO activism

Purpose – The purpose of this paper is to contribute to the ongoing debate on governance, accountability, transparency and corporate social responsibility (CSR) in the mining sector of a developing country context. It examines the reporting practices of the two largest transnational gold-mining companies in Tanzania in order to draw attention to the role played by local government regulations and advocacy and campaigning by nationally organised non-governmental organisations (NGOs) with respect to promoting corporate social reporting practices. Design/methodology/approach – The paper takes a political economy perspective to consider the serious implications of the neo-liberal ideologies of the global capitalist economy, as manifested in Tanzania’s regulatory framework and in NGO activism, for the corporate disclosure, accountability and responsibility of transnational companies (TNCs). A qualitative field case study methodology is adopted to locate the largely unfamiliar issues of CSR in the Tanzanian mining sector within a more familiar literature on social accounting. Data for the case study were obtained from interviews and from analysis of documents such as annual reports, social responsibility reports, newspapers, NGO reports and other publicly available documents. Findings – Analysis of interviews, press clips and NGO reports draws attention to social and environmental problems in the Tanzanian mining sector, which are arguably linked to the manifestation of the broader crisis of neo-liberal agendas. While these issues have serious impacts on local populations in the mining areas, they often remain invisible in mining companies’ social disclosures. Increasing evidence of social and environmental ills raises serious questions about the effectiveness of the regulatory frameworks, as well as the roles played by NGOs and other pressure groups in Tanzania. Practical implications – By empowering local NGOs through educational, capacity building, technological and other support, NGOs’ advocacy, campaigning and networking with other civil society groups can play a pivotal role in encouraging corporations, especially TNCs, to adopt more socially and environmentally responsible business practices and to adhere to international and local standards, which in turn may help to improve the lives of many poor people living in developing countries in general, and Tanzania in particular. Originality/value – This paper contributes insights from gold-mining activities in Tanzania to the existing literature on CSR in the mining sector. It also contributes to political economy theory by locating CSR reporting within the socio-political and regulatory context in which mining operations take place in Tanzania. It is argued that, for CSR reporting to be effective, robust regulations and enforcement and stronger political pressure must be put in place.

Sustainability and the building code of Australia

This report is the culmination of a two-stage research project to inform the Australian property and construction industry generally, in addition to providing the Australian Building Codes Board (ABCB) with information to allow it to determine whether or not sustainability requirements are necessary in the Future Building Code of Australia (BCA21). The Australian Building Codes Board is a joint initiative of all levels of government in Australia. The Board’s mission is to provide for efficiency and cost effectiveness in meeting community expectations for health, safety and amenity in the design, construction and use of buildings through the creation of nationally consistent building codes, standards, regulatory requirements and regulatory systems. The Stage 1 (literature review) and Stage 2 (workshops) reports are intended to be read in conjunction with one another. These reports and the Database are provided as appendices. The Conclusions of this, the final report, are the result of the overall program of work.

Harmonisation of OH&S regulations

Policy instruments of education, regulation, fines and inspection have all been utilised by Australian jurisdictions as they attempt to improve the poor performance of occupational health and safety (OH&S) in the construction industry. However, such policy frameworks have been largely uncoordinated across Australia, resulting in differing policy systems, with differing requirements and compliance systems. Such complexity, particularly for construction firms operating across jurisdictional borders, led to various attempts to improve the consistency of OH&S regulation across Australia, four of which will be reviewed in this report. 1. The first is the Occupational Health and Safety Act 1991 (Commonwealth) which enabled certain organisations to opt out of state based regulatory regimes. 2. The second is the development of national standards, codes of practice and guidance documents by the National Occupational Health and Safety Council (NOHSC). The intent was that the OHS requirements, principles and practices contained in these documents would be adopted by state and territory governments into their legislation and policy, thereby promoting regulatory consistency across Australia. 3. The third is the attachment of conditions to special purpose payments from the Commonwealth to the States, in the form of OH&S accreditation with the Office of the Federal Safety Commissioner. 4. The fourth is the development of national voluntary codes of OHS practice for the construction industry. It is interesting to note that the tempo of change has increased significantly since 2003, with the release of the findings of the Cole Royal Commission. This paper examines and evaluates each of these attempts to promote consistency across Australia. It concludes that while there is a high level of information sharing between jurisdictions, particularly from the NOSHC standards, a fragmented OH&S policy framework still remains in place across Australia. The utility of emergent industry initiatives such as voluntary codes and guidelines for safer construction practices to enhance consistency are discussed.

Harmonising procurement policy environment - identifying key themes towards the development of a conceptual model

Capital works procurement and its regulatory policy environment within a country can be complex entities. For example, by virtue of Australia’s governmental division between the Commonwealth, states and local jurisdictions and the associated procurement networks and responsibilities at each level, the tendering process is often convoluted. There are four inter-related key themes identified in the literature in relation to procurement disharmony, including decentralisation, risk & risk mitigation, free trade & competition, and tendering costs. This paper defines and discusses these key areas of conflict that adversely impact upon the business environments of industry through a literature review, policy analysis and consultation with capital works procurement stakeholders. The aim of this national study is to identify policy differences between jurisdictions in Australia, and ascertain whether those differences are a barrier to productivity and innovation. This research forms an element of a broader investigation with an aim of developing efficient, effective and nationally harmonised procurement systems. Keywords: capital works, procurement policy reform Acknowledgement: The research described in this paper carried out by the Australian Cooperative Research Centre for Construction Innovation.

Trouble and autoethnography in assessment genre : a case for postnational design in online internationalized pedagogy

This chapter is interested in the difference between local places with implicit codes and more global spaces with explicit directions, through the case study of the design and conduct of assessment in an online internationalized MBA unit. Online learning is understood to offer new ways of belonging in 'postnational' communities less reliant on locality for their frames of reference. This study reports and analyses firstly a series of troubles which erupted over the international students' desire for more explication of the desired genre for their assessment task. Then it analyses the different, 'autoethnographic' genre structure that emerged when students started to acknowledge the diverse backgrounds within the class.The chapter then offers practical considerations for the design of online internationalized programs.

Equity and quality in the early years of schooling

For most of the latter part of the twentieth century, the issues of quality and equity have been part of the agenda of compulsory schooling in Australia. However it is only more recently that the two have been brought together, which has drawn attention to the quest to create high quality and high equity schooling. The outcomes of this union have been the focus of analyses undertaken using data from the OECD Programme for International Student Assessment (PISA), which show that several features of Nordic secondary schools have produced high quality and high equity schooling. This article concentrates on the early years of school and considers the role of curriculum and syllabus documents in creating high quality and high equity in the early years, including the non-compulsory prior-to-school year. It draws on recent research in education generally to identify issues of significance that are instructive in the quest to produce high quality and high equity schooling in the early years. These issues include equity of access, syllabus design and curriculum, and transition to school; but before they are considered, I discuss the context of moves to create high quality and high equity schooling.

Research Monograph: Managing ubiquitous eco cities: telecommunication infrastructure networks, technology convergence and intelligent urban management systems

Efficient and effective urban management systems for Ubiquitous Eco Cities require having intelligent and integrated management mechanisms. This integration includes bringing together economic, socio-cultural and urban development with a well orchestrated, transparent and open decision making mechanism and necessary infrastructure and technologies. In Ubiquitous Eco Cities telecommunication technologies play an important role in monitoring and managing activities over wired, wireless or fibre-optic networks. Particularly technology convergence creates new ways in which the information and telecommunication technologies are used and formed the back bone or urban management systems. The 21st Century is an era where information has converged, in which people are able to access a variety of services, including internet and location based services, through multi-functional devices such as mobile phones and provides opportunities in the management of Ubiquitous Eco Cities. This research paper discusses the recent developments in telecommunication networks and trends in convergence technologies and their implications on the management of Ubiquitous Eco Cities and how this technological shift is likely to be beneficial in improving the quality of life and place of residents, workers and visitors. The research paper reports and introduces recent approaches on urban management systems, such as intelligent urban management systems, that are suitable for Ubiquitous Eco Cities.

The Australian nonprofit sector legal almanac 2009, ACPNS Working Paper 49

There are a number of publications in Australian which summarises annual developments n the law for business or various industries, but little is available in accessible form for nonprofit staff, boards or volunteers. This publication seeks to fill that gap by bringing together in one place case reports and significant legislative initiatives.

Framework and processes for enhancing sustainability deliverables in Australian road infrastructure projects

Road and highway infrastructure provides the backbone for a nation’s economic growth. The versatile dispersion of population in Australia and its resource boom, coupled with improved living standards and growing societal expectations, calls for continuing development and improvement of road infrastructure under the current local, state and federal governments’ policies and strategic plans. As road infrastructure projects involve huge resources and mechanisms, achieving sustainability not only on economic scales but also through environmental and social responsibility becomes a crucial issue. While sustainability is a logical link to infrastructure development, literature study and consultation with the industry found that there is a lack of common understanding on what constitutes sustainability in the infrastructure context. Its priorities are often interpreted differently among multiple stakeholders. For road infrastructure projects which typically span over long periods of time, achieving tangible sustainability outcomes during the lifecycle of development remains a formidable task. Sustainable development initiatives often remain ideological as in macro-level policies and broad-based concepts. There were little elaboration and exemplar cases on how these policies and concepts can be translated into practical decision-making during project implementation. In contrast, there seemed to be over commitment on research and development of sustainability assessment methods and tools. Between the two positions, there is a perception-reality gap and mismatch, specifically on how to enhance sustainability deliverables during infrastructure project delivery. Review on past research in this industry sector also found that little has been done to promote sustainable road infrastructure development; this has wide and varied potential impacts. This research identified the common perceptions and expectations by different stakeholders towards achieving sustainability in road and highway infrastructure projects. Face to face interviews on selected representatives of these stakeholders were carried out in order to select and categorize, confirm and prioritize a list of sustainability performance targets identified through literature and past research. A Delphi study was conducted with the assistance of a panel of senior industry professionals and academic experts, which further considered the interrelationship and influence of the sustainability indicators, and identified critical sustainability indicators under ten critical sustainability criteria (e.g. Environmental, Health & Safety, Resource Utilization & Management, Social & Cultural, Economic, Public Governance & Community Engagement, Relations Management, Engineering, Institutional and Project Management). This presented critical sustainability issues that needed to be addressed at the project level. Accordingly, exemplar highway development projects were used as case studies to elicit solutions for the critical issues. Through the identification and integration of different perceptions and priority needs of the stakeholders, as well as key sustainability indicators and solutions for critical issues, a set of decision-making guidelines was developed to promote and drive consistent sustainability deliverables in road infrastructure projects.

The National Aboriginal and Torres Strait Islander Women's Health Strategy

The National Aboriginal and Torres Strait Islander Women’s Health Strategy was launched at the Australian Women’s Health Network (AWHN) National Conference in Hobart on the 19 May 2010. It is important to note that this Strategy does not replace other national or State and Territory documents which identify priorities and needs. The aim is to supplement existing work and contribute to the new National Women's Health Policy (NWHP) being developed. This article will outline the process of the Strategy’s development and its uses for the future.