Sexing the human skull through the mastoid process

OBJECTIVE: The purpose of this study was to evaluate the significance for sex determination of the measurement of the area formed by the xerographic projection of 3 craniometric points related to the mastoid process: the porion, asterion, and mastoidale points. METHOD: Sixty skulls, 30 male and 30 female, were analyzed. A xerographic copy of each side of the skull was obtained. On each xerographic copy, the craniometric points were marked to demarcate a triangle. The area (mm²) of the demarcated triangle for each side of the skull (right (D) and left (E) sides) was determined, and the total value of these measures (T) was calculated. RESULTS: Concerning the right area of the male and female skulls, 60% of the values overlapped; for the left area, 51.67% overlapped, and for the total area, 36.67% overlapped. The analysis of the differences between the sexes in the areas studied was significant for the 3 areas. Regarding the total area, which is the preferred measurement because of the asymmetry between the sides of the skull, the value of the mean was 1505.32 mm² for male skulls, which was greater than the maximum value obtained in the female skulls. The value of the mean for female skulls was 1221.24 mm², less than the minimum value obtained for the male skulls. CONCLUSIONS: This study demonstrates a significant result in the 3 studied areas, (D), (E), and (T). The total area values show less overlapping of values between the sexes, and therefore can be used for sexing human skulls. For the population studied, values of the total area that were greater than or equal to 1447.40 mm² belonged to male crania (95% confidence). Values for this area that were less than or equal to 1260.36 mm² belonged to female crania (95% confidence).

On the labor share the long-run equilibrium and its adjustment process

This research computes an Equilibrium Labor Share using a VECM for a panel of 19 countries, analyzes what determines the speed at which the labor share adjusts towards that equilibrium and decomposes this adjustment in terms of real wages and employment. Results suggest that the speed at which a country adjusts decreases with employment protection legislation and labor taxes. Most countries’ labor shares adjustment is made through real wages changes instead of changing employment, suggesting that wage moderation policies may play an important role on the adjustment process without harming employment.

Analysis of a controversial decision process: the case of the pumped hydro storage power plant Atdorf in Germany

Based on the report for the unit “Métodos Interactivos de Participação e Decisão A” (Interactive methods of participation and decision A), coordinated by Prof. Lia Maldonado Teles de Vasconcelos and Prof. Nuno Miguel Ribeiro Videira Costa. This unit was provided for the PhD Program in Technology Assessment in 2015/2016.

The interception process in tropical rain forests: a literature review and critique (*).

A review of the literature on measurements of rain water interception processes by forests is made. Information on Africa, Central and South America, and Asia is given. A general analysis is made and the need to further the measurements under field conditions is stressed.

Millennium BCP: Optimization of the branches closure process

Nowadays, a significant number of banks in Portugal are facing a bank-branch restructuring problem, and Millennium BCP is not an exception. The closure of branches is a major component of profit maximization through the reduction in operational and personnel costs but also an opportunity to approach the idea of “baking of future” and start thinking on the benefits of the digital era. This dissertation centers on a current high-impact organizational problem addressed by the company and consists in a proposal of optimization to the model that Millennium BCP uses. Even though measures of performance are usually considered the most important elements in evaluating the viability of branches, there is evidence suggesting that other general factors can be important to assess branch potential, such as the influx on branches, business dimensions of a branch and its location, which will be addressed in this project.

Assessing fraud risk of selecção, contratação e manutenção de fornecedores process of Sonae Investimentos

The present Work Project (WP) is the result of Sonae’s concern with fraud risk, seeking to implement a method that formally describes and evaluates it in its various forms. In a context of limited human, capital, time and tools’ resources, the Internal Audit (IA) department of the company developed a framework to raise the awareness of top management and identify which processes of its value chain present a higher level of exposure to fraud, with the purpose of redirecting attention to those and prioritizing the creation of new mechanisms to monitor its KPIs’ dynamics.

Proving a market for a startup befor scaling using the hypothesis-driven entrepreneurship process

The year is 2015 and the startup and tech business ecosphere has never seen more activity. In New York City alone, the tech startup industry is on track to amass $8 billion dollars in total funding – the highest in 7 years (CB Insights, 2015). According to the Kauffman Index of Entrepreneurship (2015), this figure represents just 20% of the total funding in the United States. Thanks to platforms that link entrepreneurs with investors, there are simply more funding opportunities than ever, and funding can be initiated in a variety of ways (angel investors, venture capital firms, crowdfunding). And yet, in spite of all this, according to Forbes Magazine (2015), nine of ten startups will fail. Because of the unpredictable nature of the modern tech industry, it is difficult to pinpoint exactly why 90% of startups fail – but the general consensus amongst top tech executives is that “startups make products that no one wants” (Fortune, 2014). In 2011, author Eric Ries wrote a book called The Lean Startup in attempts to solve this all-too-familiar problem. It was in this book where he developed the framework for The Hypothesis-Driven Entrepreneurship Process, an iterative process that aims at proving a market before actually launching a product. Ries discusses concepts such as the Minimum Variable Product, the smallest set of activities necessary to disprove a hypothesis (or business model characteristic). Ries encourages acting briefly and often: if you are to fail, then fail fast. In today’s fast-moving economy, an entrepreneur cannot afford to waste his own time, nor his customer’s time. The purpose of this thesis is to conduct an in-depth of analysis of Hypothesis-Driven Entrepreneurship Process, in order to test market viability of a reallife startup idea, ShowMeAround. This analysis will follow the scientific Lean Startup approach; for the purpose of developing a functional business model and business plan. The objective is to conclude with an investment-ready startup idea, backed by rigorous entrepreneurial study.

Customer service process optimization at Sonae e MC

Sonae MC is constantly innovating and keeping up with the new market trends, being increasingly focused on E-commerce due to its growing importance. In that area, a telephone line is available to support customers with their problems. However, rare were the cases in which those problems were solved in the first contact. Therefore, the goal of this work was to reengineer these processes to improve the service performance and consequently the customer’s satisfaction. Following an evolutionary approach, improvement opportunities were suggested and if correctly implemented the cases resolution time could decrease 1 day and Sonae MC will save €7.750 per month.

The role of information systems in business process redesign : a case of Turkish electricity market

This study is specifically concerned with the effect of the Enterprise Resource Planning (ERP) on the Business Process Redesign (BPR). Researcher’s experience and the investigation on previous researches imply that BPR and ERP are deeply related to each other and a study to found the mentioned relation further is necessary. In order to elaborate the hypothesis, a case study, in particular Turkish electricity distribution market and the phase of privatization are investigated. Eight companies that have taken part in privatization process and executed BPR serve as cases in this study. During the research, the cases are evaluated through critical success factors on both BPR and ERP. It was seen that combining the ERP Solution features with business processes lead the companies to be successful in ERP and BPR implementation. When the companies’ success and efficiency were compared before and after the ERP implementation, a considerable change was observed in organizational structure. It was spotted that the team composition is important in the success of ERP projects. Additionally, when the ERP is in driver or enabler role, the companies can be considered successful. On the contrary, when the ERP has a neutral role of business processes, the project fails. In conclusion, it can be said that the companies, which have implemented the ERP successfully, have accomplished the goals of the BPR.

Removal of organic contaminants from wastewater using the electrodialytic process

Pharmaceuticals and personal care products (PPCPs) are widely used on a daily basis. After their usage they reach the wastewater treatment plants (WWTPs). These compounds have different physico-chemical characteristics, which makes them difficult to completely remove in the WWTPs, througth conventional treatments. Currently, there is no legislation regarding PPCPs thresholds in effluent discharge. But, even at vestigial concentrations, these compounds enclose environmental risks due to, e.g., endocrine disruption potential. There is a need of alternative techniques for their removal in WWTPs. The main goal of this work was to assess the use of electrodialytic (ED) process to remove PPCPs from the effluent to be discharged. A two-compartment ED cell was used testing (i) the effluent position in the cell (anode and cathode compartment); (ii) the use of anion (AEM) and cation exchange membrane (CEM); (iii) the treatment period (6, 12 and 24 hours); (iv) effluent recirculation and current steps; (v) the feasibility of sequential treatments. Phosphorus (P) removal from effluent and energetic costs associated to the process were also evaluated. Five PPCPs were studied – caffeine (CAF), bisphenol A (BPA), 17 β-estradiol (E2), ethinyl estradiol (EE2) and oxybenzone (MBPh). The ED process showed to be effective in the removal when effluent is in the anode compartment. Oxidation is suggested to be the main removal process, which was between 88 and 96%, for all the compounds, in 6 hours. Nevertheless, the presence of intermediates and/or by-products was also observed in some cases. Effluent recirculation should have a retention time in the ED cell big enough to promote removal whereas the current steps (effluent in anode compartment) slightly increased removal efficiencies (higher than 80% for all PPCPs). The sequential set of ED treatment (effluent in anode compartment) showed to be effective during both periods with a removal percentage between 80 and 95% and 73 to 88% in the case of AEM and CEM, respectively. Again, the main removal process is strongly suggested to be oxidation in the anode compartment. However, there was an increase of BOD5 and COD, which might be explained by effluent spiking, these parameters limiting the effluent discharge. From these treatments, the use of AEM, enhanced the P removal from effluent to minimize risk of eutrophication. Energetic costs of the best set-up (6 hours) are approximately 0,8€/m3 of wastewater, a value considered low, attending to the prices of other treatment processes.

Organic-inorganic nanostructured multilayers for calcium phosphate biomineralization

The weak fixation of biomaterials within the bone structure is one of the major reasons of implants failures. Calcium phosphate (CaP) coatings are used in bone tissue engineering to improve implant osseointegration by enhancing cellular adhesion, proliferation and differentiation, leading to a tight and stable junction between implant and host bone. It has also been observed that materials compatible with bone tissue either have a CaP coating or develop such a calcified surface upon implantation. Thus, the development of bioactive coatings becomes essential for further improvement of integration with the surrounding tissue. However, most of current applied CaP coatings methods (e.g. physical vapor deposition), cannot be applied to complex shapes and porous implants, provide poor structural control over the coating and prevent incorporation of bioactive organic compounds (e.g. antibiotics, growth factors) because of the used harsh processing conditions. Layer-by-layer (LbL) is a versatile technology that permits the building-up of multilayered polyelectrolyte films in mild conditions based on the alternate adsorption of cationic and anionic elements that can integrate bioactive compounds. As it is recognized in natureâ s biomineralization process the presence of an organic template to induce mineral deposition, this work investigate a ion based biomimetic method where all the process is based on LbL methodology made of weak natural-origin polyelectrolytes. A nanostructured multilayer component, with 5 or 10 bilayers, was produced initially using chitosan and chondroitin sulphate polyelectrolyte biopolymers, which possess similarities with the extracellular matrix and good biocompatibility. The multilayers are then rinsed with a sequential passing of solutions containing Ca2+ and PO43- ions. The formation of CaP over the polyelectrolyte multilayers was confirmed by QCM-D, SEM and EDX. The outcomes show that 10 polyelectrolyte bilayer condition behaved as a  better site for initiating the formation of CaP as the precipitation occur at earlier stages than in 5 polyelectrolyte bilayers one. This denotes that higher number of bilayers could hold the CaP crystals more efficiently. This work achieved uniform coatings that can be applied to any surface with access to the liquid media in a low-temperature method, which potentiates the manufacture of effective bioactive biomaterials with great potential in orthopedic applications.

Stromal vascular fraction cell sheets angiogenic potential for tissue engineering and regenerative medicine applications

One of the biggest concerns in the Tissue Engineering field is the correct vascularization of engineered constructs. Strategies involving the use of endothelial cells are promising but adequate cell sourcing and neo-vessels stability are enduring challenges. In this work, we propose the hypoxic pre-conditioning of the stromal vascular fraction (SVF) of human adipose tissue to obtain highly angiogenic cell sheets (CS). For that, SVF was isolated after enzymatic dissociation of adipose tissue and cultured until CS formation in normoxic (pO2=21%) and hypoxic (pO2=5%) conditions for 5 and 8 days, in basal medium. Immunocytochemistry against CD31 and CD146 revealed the presence of highly branched capillary-like structures, which were far more complex for hypoxia. ELISA quantification showed increased VEGF and TIMP-1 secretion in hypoxia for 8 days of culture. In a Matrigel assay, the formation of capillary-like structures by endothelial cells was more prominent when cultured in conditioned medium recovered from the cultures in hypoxia. The same conditioned medium increased the migration of adipose stromal cells in a scratch assay, when compared with the medium from normoxia. Histological analysis after implantation of 8 days normoxic- and hypoxic-conditioned SVF CS in a hindlimb ischemia murine model showed improved formation of neo-blood vessels. Furthermore, Laser Doppler results demonstrated that the blood perfusion of the injured limb after 30 days was enhanced for the hypoxic CS group. Overall, these results suggest that SVF CS created under hypoxia can be used as functional vascularization units for tissue engineering and regenerative medicine.

Release of insulin from PLGA-alginate dressing stimulates regenerative healing of burn wounds in rats

Burn wound healing involves a complex set of overlapping processes in an environment conducive to ischemia, inflammation, and infection costing $7.5 billion/year in the US alone, in addition to the morbidity and mortality that occur when the burns are extensive. We previously showed that insulin, when topically applied to skin excision wounds, accelerates re-epithelialization, and stimulates angiogenesis. More recently, we developed an alginate sponge dressing (ASD) containing insulin encapsulated in PLGA microparticles that provides a sustained release of bioactive insulin for >20days in a moist and protective environment. We hypothesized that insulin-containing ASD accelerates burn healing and stimulates a more regenerative, less scarring, healing. Using a heat-induced burn injury in rats, we show that burns treated with dressings containing 0.04mg insulin/cm2, every three days for 9 days, have faster closure, faster rate of disintegration of dead tissue, and decreased oxidative stress.In addition, in insulin-treated wounds the pattern of neutrophil inflammatory response suggests faster clearing of the burn dead tissue. We also observe faster resolution of the pro-inflammatory macrophages. We also found that insulin stimulates collagen deposition and maturation with the fibers organized more like a basket weave (normal skin) than aligned and crosslinked (scar tissue). In summary , application of ASD-containing insulin-loaded PLGA particles on burns every three days stimulates faster and more regenerative healing. These results suggest insulin as a potential therapeutic agent in burn healing and, because of its long history of safe use in humans, insulin could become one of the treatments of choice when repair and regeneration are critical for proper tissue function.