Tidal and sea level changes at Jeddah, Red Sea

Tidal and sea level changes during 1991 at a coastal station (Jeddah) in the central part of the Red Sea are investigated. Analysis shows higher sea levels in winter and lower in summer. The amplitude of change at Jeddah is above 50cm. Analysis of wind stress at Jeddah indicates an insignificant contribution of the cross-shore component, while a major part of the changes in the sea level can be accounted for by the long-shore component.

Occurrence of a deeper red colour in prawn pulp prepared from iced-prawns

In commerce, great importance is given to the color of the dry prawn pulp in its quality evaluation. The possible correlation between this color factor to the iced or not iced condition of the raw prawn used, is investigated. The study reveals that as the icing period of the raw material increases the color of the finished product proportionately intensifies to a bright red compared to light brownish yellow or orange color of the product from the not iced prawn, and at the same time the other characteristics like flavor and taste deteriorates as the time of icing advances. This finding tends to show that the color factor does not reflect the true quality of prawn pulp. Based on chemical data it is suggested that "browning" due to Maillard reaction may have an important role in this color phenomena.

Growth and production performance of red tilapia and Nile tilapia (Oreochromis niloticus Lin.) under low-input culture system

Comparative production potential of red tilapia (a mutant hybrid of Oreochromis mossambicus) and Nile tilapia (Oreochromis niloticus) under low-input aquaculture was studied in six ponds of 360 m² each with an average water depth of 90 cm. Three ponds were stocked with fingerlings of O. niloticus (average weight 11.4±3.48 g) while three other ponds were stocked with red tilapia (average weight 10.72±2.5 g) at a density of 20,000 fingerlings/ha. Supplementary feed consisting of rice bran was given daily at 4-6% of standing biomass. Ponds were fertilized at fortnightly intervals with cattle manure 750 kg/ ha. After six months of rearing, gross fish productions of 3,218 and 3,017 kg/ha were obtained from O. niloticus and red tilapia ponds, respectively. Of this, table size fish (>80 g in size) production amounted to 2,366 and 2,823 kg/ha from O. niloticus and red tilapia culture, respectively. Analysis of cost and benefits showed higher benefit from red tilapia culture.

Comparison of stabilised/solidified mixes of model drill cuttings based on the North Sea and Red Sea Areas

Following the global stringent legislations regulating the wastes generated from the drilling process of oil exploration and production activities, the management of hazardous drill cuttings has become one of the pressing needs confronting the petroleum industry. Most of the prevalent treatment techniques adopted by oil companies are extremely expensive and/or the treated product has to be landfilled without any potential end-use; thereby rendering these solutions unsustainable. The technique of stabilisation/solidification is being investigated in this research to treat drill cuttings prior to landfilling or for potential re-use in construction products. Two case studies were explored namely North Sea and Red Sea. Given the known difficulties with stabilising/solidifying oils and chlorides, this research made use of model drill cutting mixes based on typical drill cutting from the two case studies, which contained 4.2% and 10.95% average concentrations of hydrocarbons; and 2.03% and 2.13% of chlorides, by weight respectively. A number of different binders, including a range of conventional viz. Portland cement (PC) as well as less-conventional viz. zeolite, or waste binders viz. cement kiln dust (CKD), fly ash and compost were tested to assess their ability to treat the North Sea and Red Sea model drill cuttings. The dry binder content by weight was 10%, 20% and 30%. In addition, raw drill cuttings from one of the North Sea offshore rigs were stabilised/solidified using 30% PC. The characteristics of the final stabilised/solidified product were finally compared to those of thermally treated cuttings. The effectiveness of the treatment using the different binder systems was compared in the light of the aforementioned two contaminants only. A set of physical tests (unconfined compressive strength (UCS)), chemical tests (NRA leachability) and micro-structural examinations (using scanning electron microscopy (SEM), and X-ray diffraction (XRD)) were used to evaluate the relative performance of the different binder mixes in treating the drill cuttings. The results showed that the observed UCS covered a wide range of values indicating various feasible end-use scenarios for the treated cuttings within the construction industry. The teachability results showed the reduction of the model drill cuttings to a stable non-reactive hazardous waste, compliant with the UK acceptance criteria for non-hazardous landfills: (a) by most of the 30% and 20% binders for chloride concentrations, and (b) by the 20% and 30% of compost-PC and CKD-PC binders for the Red Sea cuttings. The 20% and 30% compost-PC and CKD-PC binders successfully reduced the leached oil concentration of the North Sea cuttings to inert levels. Copyright 2007, Society of Petroleum Engineers.

The storage of red snapper (Lutjanus spp.) in ice, chilled sea water and chilled fresh water

The results are given of trials conducted to determine the effect on quality of holding fish (Lutjanus species) in chilled freshwater and also to compare the quality loss of fish stored in chilled seawater and chilled freshwater and in ice. No adverse effects were observed when storing in chilled freshwater apart from loss of external appearance after 6 days storage; taste panel tests showed acceptable conditions up to 15 days. Chilled seawater is unsuitable for storage as it spoils the intake of salt from the medium, making the flesh unpalatable.

Genetic diversity and population history of the red panda (Ailurus fulgens) as inferred from mitochondrial DNA sequence variations

The red panda (Ailurus fulgens) is one of the flagship species in worldwide conservation and is of special interest in evolutionary studies due to its taxonomic uniqueness. We sequenced a 236-bp fragment of the mitochondrial D-loop region in a sample of 5

Red-Green-Blue 2D tuneable liquid crystal laser devices

In this paper, we review our recent experimental work on coherent and blue phase liquid crystal lasers.We will present results on thin-film photonic band edge lasing devices using dye-doped low molar mass liquid crystals in self-organised chiral nematic and blue phases. We show that high Q-factor lasers can be achieved in these materials and demonstrate that a single mode output with a very narrow line width can be readily achievable in well-aligned mono-domain samples. Further, we have found that the performance of the laser, i.e. the slope efficiency and the excitation threshold, are dependent upon the physical parameters of the low molar mass chiral nematic liquid crystals. Specifically, slope efficiencies greater than 60% could be achieved depending upon the materials used and the device geometry employed. We will discuss the important parameters of the liquid crystal host/dye guest materials and device configuration that are needed to achieve such high slope efficiencies. Further we demonstrate how the wavelength of the laser can be tuned using an in-plane electric field in a direction perpendicular to the helix axis via a flexoelectric mechanism as well as thermally using thermochromic effects. We will then briefly outline data on room temperature blue phase lasers and further show how liquid crystal/lenslet arrays have been used to demonstrate 2D laser emission of any desired wavelength. Finally, we present preliminary data on LED/incoherent pumping of RG liquid crystal lasers leading to a continuous wave output. © 2009 SPIE.