Atmospheric pressure chemical vapour deposition of boron doped titanium dioxide for photocatalytic water reduction and oxidation

Boron-doped titanium dioxide (B-TiO) films were deposited by atmospheric pressure chemical vapour deposition of titanium(iv) chloride, ethyl acetate and tri-isopropyl borate on steel and fluorine-doped-tin oxide substrates at 500, 550 and 600 °C, respectively. The films were characterised using powder X-ray diffraction (PXRD), which showed anatase phase TiO at lower deposition temperatures (500 and 550 °C) and rutile at higher deposition temperatures (600 °C). X-ray photoelectron spectroscopy (XPS) showed a dopant level of 0.9 at% B in an O-substitutional position. The ability of the films to reduce water was tested in a sacrificial system using 365 nm UV light with an irradiance of 2 mW cm. Hydrogen production rates of B-TiO at 24 μL cm h far exceeded undoped TiO at 2.6 μL cm h. The B-TiO samples were also shown to be active for water oxidation in a sacrificial solution. Photocurrent density tests also revealed that B-doped samples performed better, with an earlier onset of photocurrent. © 2013 The Owner Societies.

Investigating the dynamics of laser induced sparks in atmospheric helium using Rayleigh and Thomson scattering

We have used optical Rayleigh and Thomson scattering to investigate the expansion dynamics of laser induced plasma in atmospheric helium and to map its electron parameters both in time and space. The plasma is created using 9 ns duration, 140 mJ pulses from a Nd:YAG laser operating at 1064 nm, focused with a 10 cm focal length lens, and probed with 7 ns, 80 mJ, and 532 nm Nd:YAG laser pulses. Between 0.4 μs and 22.5 μs after breakdown, the electron density decreases from 3.3 × 1017 cm−3 to 9 × 1013 cm−3, while the temperature drops from 3.2 eV to 0.1 eV. Spatially resolved Thomson scattering data recorded up to 17.5 μs reveal that during this time the laser induced plasma expands at a rate given by R ∼ t0.4 consistent with a non-radiative spherical blast wave. This data also indicate the development of a toroidal structure in the lateral profile of both electron temperature and density. Rayleigh scattering data show that the gas density decreases in the center of the expanding plasma with a central scattering peak reemerging after about 12 μs. We have utilized a zero dimensional kinetic global model to identify the dominant particle species versus delay time and this indicates that metastable helium and the He2 + molecular ion play an important role.

Interactions of a non-thermal atmospheric pressure plasma effluent with PC-3 prostate cancer cells

The effect of a radio-frequency driven, microscale non thermal atmospheric pressure plasma jet operated in helium with vol. 0.3% molecular oxygen gas admixture, on PC-3 prostate cancer cells has been investigated. The viability of cells exposed to the plasma was found to decrease with increasing plasma exposure time, with apoptosis through caspase and PARP cleavage being observed. High concentrations of nitrite and nitrate were detected in growth media exposed to the plasma and were found to increase in a time dependent manner post exposure. This indicates a slow release of reactive nitrogen species into the growth media, which is likely to influence cellular response to plasma exposure.

Evolution of Hot Loops in an Active Region Core Observed with the SDO Atmospheric Image Assembly

Evidence has accumulated of high temperature (> 4 MK) coronal emission in active region cores that corresponds to structures in equilibrium. Other studies have found evidence of evolving loops. We investigate the EUV intensity and temperature variations of short coronal loops observed in the core of NOAA Active Region 11250 on 13 July 2011. The loops, which run directly between the AR opposite polarities, are first detectable in the 94Å band of Fe XVIII, implying an effective temperature ~ 7 MK. The low temperature component of the 94 Å signal is modeled in terms of a linear superposition of the 193 Å and 171 Å signals in order to separate the hot component. After identifying the loops we have used contemporaneous HMI observations to identify the corresponding inter-moss regions, and we have investigated their time evolution in six AIA EUV channels. The results can be separated into two classes. Group 1 (94Å, 335Å, 211Å) is characterized by hotter temperatures (~2-7 MK), and Group 2 (193Å, 171Å, 131Å) by cooler temperatures (0.4 - 1.6 MK). For Group 1 the intensity peaks in the 94Å channel are followed by maxima in the 335 Å channel with a time lag of ~8 min, suggestive of a cooling pattern with an exponential decay. While the 211Å maxima follow those in the 335 Å channel, there is no systematic relation which would indicate a progressive cooling process through the lower temperatures, as has been observed in other investigations. In Group 2 the signals in the 171 and 131Å channels track each other closely, and lag behind the 193Å. In the inter-moss region of the loop the peak temperature and peak emission measure have opposite trends. The hot 94Å brightenings occur in the central part of the loops with maximum temperatures ~7 MK. Subsequently the loops appear to fill with plasma with an emission measure compatible with the 193 Å signal and temperature in the range ~ 1.5-2 MK. Although the exact details of the time evolution are still under investigation, these non static loops show high levels of intermittency in the 94Å signal (please see poster "Intermittent and Scale-Invariant Intensity Fluctuations in Hot Coronal Loops," by Lawrence et al. in this session).

Bactericidal efficacy of atmospheric pressure non-thermal plasma (APNTP) against the ESKAPE pathogens

The emergence of multidrug-resistant pathogens within the clinical environment is presenting a mounting problem in hospitals worldwide. The 'ESKAPE' pathogens (Enterococcusfaecium, Staphylococcus aureus, Klebsiella pneumoniae, Acinetobacter baumannii, Pseudomonas aeruginosa and Enterobacter spp.) have been highlighted as a group of causative organisms in a majority of nosocomial infections, presenting a serious health risk due to widespread antimicrobial resistance. The stagnating pipeline of new antibiotics requires alternative approaches to the control and treatment of nosocomial infections. Atmospheric pressure nonthermal plasma (APNTP) is attracting growing interest as an alternative infection control approach within the clinical setting. This study presents a comprehensive bactericidal assessment of an in-house-designed APNTP jet both against biofilms and planktonic bacteria of the ESKAPE pathogens. Standard plate counts and the XTT metabolic assay were used to evaluate the antibacterial effect of APNTP, with both methods demonstrating comparable eradication times. APNTP exhibited rapid antimicrobial activity against all of the ESKAPE pathogens in the planktonic mode of growth and provided efficient and complete eradication of ESKAPE pathogens in the biofilm mode of growth within 360 s, with the exception of A. baumannii where a >4log reduction in biofilm viability was observed. This demonstrates its effectiveness as a bactericidal treatment against these pathogens and further highlights its potential application in the clinical environment for the control of highly antimicrobial-resistant pathogens.

Atmospheric Pressure DC Plasma Processing of TIO2/PEDOT:PSS Nanocomposites

In this work we demonstrate the synthesis of a TiO2/PEDOT:PSS nanocomposite material in aqueous solution through atmospheric pressure direct current (DC) plasma processing at room temperature. The dispersion of the TiO2 nanoparticles is enhanced after microplasma processing, and TiO2/polymer hybrid nanoparticles with a distinct core shell structure have been obtained. We have observed increased TiO2/PEDOT:PSS nanocomposite electrical conductivity due to microplasma processing. The improvement in nanocomposite properties is due to the enhanced dispersion and stability in liquid polymer of microplasma treated TiO2 nanoparticles. Both plasma induced surface charge and nanoparticle surface termination with specific plasma chemical species are thought to provide an enhanced barrier to nanoparticle agglomeration and promote nanoparticle-polymer bonding, which is expected to have a significant benefit in materials processing with inorganic nanoparticles for wide range of applications.

Plasmid DNA damage following exposure to atmospheric pressure non-thermal plasma: kinetics and influence of oxygen admixture

The nature and kinetics of plasmid DNA damage after DNA exposure to a kHz-driven atmospheric pressure nonthermal plasma jet has been investigated. Both single-strand break (SSB) and double-strand break (DSB) processes are reported here. While SSB had a higher rate constant, DSB is recognized to be more significant in living systems, often resulting in loss of viability. In a helium-operated plasma jet, adding oxygen to the feed gas resulted in higher rates of DNA DSB, which increased linearly with increasing oxygen content, up to an optimum level of 0.75% oxygen, after which the DSB rate decreased slightly, indicating an essential role for reactive oxygen species in the rapid degradation of DNA.

Magnetospheric Structure and Atmospheric Joule Heating of Habitable Planets Orbiting M-dwarf Stars

We study the magnetospheric structure and the ionospheric Joule Heating of planets orbiting M-dwarf stars in the habitable zone using a set of magnetohydrodynamic models. The stellar wind solution is used to drive a model for the planetary magnetosphere, which is coupled with a model for the planetary ionosphere. Our simulations reveal that the space environment around close-in habitable planets is extreme, and the stellar wind plasma conditions change from sub- to super-Alfvénic along the planetary orbit. As a result, the magnetospheric structure changes dramatically with a bow shock forming in the super-Alfvénic sectors, while no bow shock forms in the sub-Alfvénic sectors. The planets reside most of the time in the sub-Alfvénic sectors with poor atmospheric protection. A significant amount of Joule Heating is provided at the top of the atmosphere as a result of the intense stellar wind. For the steady-state solution, the heating is about 0.1%-3% of the total incoming stellar irradiation, and it is enhanced by 50% for the time-dependent case. The significant Joule Heating obtained here should be considered in models for the atmospheres of habitable planets in terms of the thickness of the atmosphere, the top-side temperature and density, the boundary conditions for the atmospheric pressure, and particle radiation and transport. Here we assume constant ionospheric Pedersen conductance similar to that of the Earth. The conductance could be greater due to the intense EUV radiation leading to smaller heating rates. We plan to quantify the ionospheric conductance in future study.

Atmospheric cold plasma process for vegetable leaf decontamination: A feasibility study on radicchio (red chicory, Cichorium intybus L.)

Cold plasma is an emerging non-thermal processing technology that could be used for large scale leaf decontamination as an alternative to chlorine washing. In this study the effect of an atmospheric cold plasma apparatus (air DBD, 15 kV) on the safety, antioxidant activity and quality of radicchio (red chicory, Cichorium intybus L.) was investigated after 15 and 30 min of treatment (in afterglow at 70 mm from the discharge, at 22 °C and 60% of RH) and during storage. Escherichia coli O157:H7 inoculated on radicchio leaves was significantly reduced after 15 min cold plasma treatment (-1.35 log MPN/cm²). However, a 30 min plasma treatment was necessary to achieve a significant reduction of Listeria monocytogenes counts (-2.2 log CFU/cm²). Immediately after cold plasma treatment, no significant effects emerged in terms of antioxidant activity assessed by the ABTS and ORAC assay and external appearance of the radicchio leaves. Significant changes between treated and untreated radicchio leaves are quality defects based on the cold plasma treatment. Atmospheric cold plasma appears to be a promising processing technology for the decontamination of leafy vegetables although some criticalities, that emerged during storage, need to be considered in future studies.

Global atmospheric energetics under present and future climate conditions

An evaluation of the global atmospheric energetics is presented in the framework of the basic decomposition into the zonal mean and eddy components, the zonal wavenumber decomposition, and the three-dimensional normal mode decomposition. An extension to the normal mode energetics formulation is also presented in the study, which enables the explicit evaluation of the conversion rate between available potential energy and kinetic energy along with their generation and dissipation rates, in both the zonal wavenumber and vertical mode domains. In addition, it has been proposed an extended energy cycle diagram describing the flow of energy among the zonal mean and eddy components, and also among the barotropic and baroclinic components. The energetics is first assessed for three reanalysis datasets and five state-ofthe- art climate models simulations representing the present climate conditions. It is performed a comparative analysis between the observationally based energetics and that based on the climate models' simulations. In order to appraise possible changes in the atmospheric energetics of a future climate scenario relative to that of the present climate conditions, the analysis is extended using the datasets simulated by the same five climate models for a future climate scenario experiment, as defined in the Special Report on Emissions Scenarios (SRES) of the Intergovernmental Panel on Climate Change (IPCC).

Lichen biodiversity and biomonitoring of atmospheric pollution

Esta tese debruça-se sobre a biodiversidade de líquenes epífitos de pinhais dunares portugueses e sobre uso de líquenes como biomonitores de poluição atmosférica nesse habitat. A Mata Nacional das Dunas de Quiaios (Figueira da Foz) foi o ponto de partida dos estudos de biodiversidade efetuados nesta tese, mas alguns deles estenderam-se à maior parte da costa portuguesa. Como resultado, encontrou-se uma espécie nova para a ciência, Lecanora sorediomarginata Rodrigues, Terrón & Elix, epifítica sobre Pinus pinaster Aiton e P. pinea L, que se encontra distribuída na maior parte da costa. Esta espécie caracteriza-se morfologicamente por um talo crustáceo, de cor esbranquiçada a acinzentada ou esverdeada e que desenvolve sorálios a partir de pequenas verrugas marginais. Quimicamente caracteriza-se pela presença dos ácidos 3,5-dicloro-2'-O-metilnorestenospórico [maior], 3,5-dicloro-2 -O-metilanziaico [menor], 3,5-dicloro-2 -O-metilnordivaricático [menor], 5-cloro-2'-Ometilanziaico [traço] e úsnico [traço]; atranorina [menor] e cloroatranorina [menor]. É quimicamente semelhante a L. lividocinerea Bagl., com a qual apresenta afinidades filogenéticas com base na análise da sequência ITS do rDNA, e a L. sulphurella Hepp. Adicionalmente, espécies Chrysothrix flavovirens Tønsberg e Ochrolechia arborea (Kreyer) Almb, também se encontraram epifíticas sobre P. pinaster e P. pinea em vários pinhais ao longo da costa, representando novos registos para a flora liquénica portuguesa, bem como a espécie Lepraria elobata Tønsberg encontrada epifítica sobre P. pinaster apenas nas Dunas de Quiaios. Além disso, as espécies Hypotrachyna lividescens (Kurok.) Hale e H. pseudosinuosa (Asahina) Hale encontraram-se epifíticas sobre P. pinaster e outros forófitos nas Dunas de Quiaios, constituindo novos registos para a flora liquénica da Península Ibérica. Estes resultados põe em evidência a importância dos pinhais dunares como habitat para líquenes epífitos. Num estudo conduzido entre janeiro e julho de 2008 num pinhal dunar (Mata do Urso, Figueira da Foz), em cuja bordadura existe uma fábrica de celulose de papel, usaram-se transplantes de líquenes da espécie Flavoparmelia caperata (L.) Hale para avaliar a acumulação de trinta e três elementos putativamente emitidos por fábricas de papel e pasta de papel. A cinética da fluorescência da clorofila a foi estudada nos líquenes transplantados, através da análise dos parâmetros Fv/Fm, F0, Fm, qP, NPQ, PSII, e Exc, de forma a avaliar os efeitos decorrentes da acumulação de elementos na vitalidade dos líquenes. Pretendeu-se avaliar se a acumulação de elementos e a cinética da fluorescência da clorofila a variavam significativamente com o local e o tempo de exposição, tendo em consideração os resultados obtidos de transplantes colocados num local de referência (Dunas de Quiaios) durante o mesmo período de tempo. (Continua no verso) resumo A maior parte dos elementos — Al, B, Ba, Ca, Co, Cr, Cu, Fe, Hg, Li, Mg, Mn, Mo, Na, Ni, P, S, Sb, Sc, Sr, Ti e V — ocorreu em concentrações significativamente mais elevadas nos transplantes expostos a 500 m da fábrica. Cerca de metade dos elementos estudados — B, Ba, Cr, Fe, Hg, Mg, Mn, Mo, Na, P, Pb, S, Sb e V — encontraram-se em concentrações significativamente mais elevadas nos transplantes expostos durante 180 dias. O solo foi identificado como uma fonte parcial da maior parte dos elementos. Os parâmetros Fv/Fm, Fm, PSII e Exc variaram significativamente com o local e/ou com o tempo de exposição. Observou-se um decréscimo significativo nos parâmetros Fv/Fm e Fm nos transplantes expostos a 500 e 1000 da fábrica, e também naqueles expostos durante 135 e 180 dias. Observou-se também um decréscimo significativo nos parâmetros PSII e Exc expostos durante 180 dias. Estes parâmetros correlacionaram-se de forma negativa e significativa com a acumulação de elementos: Fv/Fm: B, Ba, Co, Fe, Hg, Mg, Mn, Mo, N, P, S, Sb e Zn; Fm: Ba, Co, Hg, Mn, Mo, N, P, S, Sb e Zn; PSII: N e P; Exc: Mn, N, P e S. Estudos acerca da diversidade liquénica efetuados nos mesmos locais onde os transplantes foram colocados no local impactado, revelaram um menor valor de diversidade liquénica a 500 m da fábrica, que foi também o único local onde se encontraram espécies nitrófilas, o que se poderá dever à deposição de amónia e/ou poeiras. À semelhança de outros estudos, este trabalho confirma que os líquenes podem ser usados com sucesso em estudos de biomonitorização, mesmo em locais florestados. Além disso, traz também informações adicionais sobre como a acumulação de elementos pode influenciar a cinética da fluorescência da clorofila a em líquenes.

Assessing the atmospheric oscillations effects on the biology of the bullet tuna (Auxis rochei) and its possible linkage with global warming

Dissertação de mestrado, Biologia Marinha, Faculdade de Ciências e Tecnologia, Universidade do Algarve; Instituto Español de Oceanografia; 2015

Seasonal Variation in Diurnal Atmospheric Grass Pollen Concentration Profiles

In this study, the diurnal atmospheric grass pollen concentration profile within the Danish city of Aarhus was shown to change in a systematic manner as the pollen season progressed. Although diurnal grass pollen profiles can differ greatly from day-to-day, it is common practice to establish the time of day when peak concentrations are most likely to occur using seasonally averaged diurnal profiles. Atmospheric pollen loads are highly dependent upon emissions, and different species of grass are known to flower and emit pollen at different times of the day and during different periods of the pollen season. Pollen concentrations are also influenced by meteorological factors – directly through those parameters that govern pollen dispersion and transport, and indirectly through the weather-driven flowering process. We found that three different profiles dominated the grass pollen season in Aarhus – a twin peak profile during the early season, a single evening profile during the middle of the season, and a single midday peak during the late season. Whilst this variation could not be explained by meteorological factors, no inconsistencies were found with the theory that it was driven by a succession of different grass species with different diurnal flowering patterns dominating atmospheric pollen loads as the season progressed. The potential for exposure was found to be significantly greater during the late-season period than during either the early- or mid-season periods.

Modelling Atmospheric Concentrations of Ragweed Pollen From Local and Distant Sources

Pollen grains from the genus ragweed (Ambrosia spp.) are important aeroallergens. In Europe, the largest sources of atmospheric ragweed pollen are the Rhône Valley (France), parts of Northern Italy, the Pannonian Plain and Ukraine. Episodes of Long Distance Transport (LDT) of ragweed pollen from these centres can cover large parts of Europe and are predominantly studied using receptor based models (Smith et al., (2013) and references therein). The clinical impact of allergenic ragweed pollen arriving from distant sources remains unclear (Cecchi et al. 2010). Although a recent study has found the major allergens of ragweed in air samples collected in Poznań, Poland, during episodes of long-distance transport from the Pannonian Plain (Grewling et al. 2013). The source orientated models SILAM, DEHM, COSMO-Art, METRAS and ENVIRO-HIRLAM currently report having the capability of modelling atmospheric concentrations of pollen in Europe. The performance of such source-orientated models is strongly dependent on the quality of the emissions data, which is a focus of current research (e.g. Thibaudon et al. (2014)). The output from these models are important for warning allergy sufferers in areas polluted by ragweed, but could also be used to warn the public of ragweed pollen being transported into areas where the plant is not abundant. Areas outside of the main areas of ragweed infection that contain considerable local populations must, however, also include local scale models. These models can be used to predict local concentrations, even when LDT is not present. This concept of combined LDT and local scale calculations has been shown to be work for air pollutants and is considered usable for urban scale calculations of aeroallergens once urban scale maps of aeroallergen sources have been produced.

Atmospheric Concentrations of Alternaria, Cladosporium, Ganoderma and Didymella Spores Monitored in Cork (Ireland) and Worcester (England) During the Summer of 2010

This study represents the first international intercomparison of fungal spore observations since 1990, focusing on atmospheric concentrations of Alternaria, Cladosporium, Ganoderma and Didymella spores. The campaigns were performed at sites located in Cork (Ireland) and Worcester (England) during summer 2010. Observations were made using Hirst-type volumetric spore traps and corresponding optical identification at the genus level by microscope. The measurements at both sites (including meteorological parameters) were compared and contrasted. The relationships between the fungal spore concentrations with selected meteorological parameters were investigated using statistical methods and multivariate regression trees (MRT). The results showed high correlations between the two sites with respect to daily variations. Statistically significant higher spore concentrations for Alternaria, Cladosporium and Ganoderma were monitored at the Worcester site. This result was most likely due to the differences in precipitation and local fungal spore sources at the two sites. Alternaria and Cladosporium reached their maxima a month earlier in Cork than in Worcester, and Didymella with Ganoderma peaked simultaneously with similar diurnal trends found for all the investigated spore types. MRT analysis helped to determine threshold values of the meteorological parameters that exerted most influence on the presence of spores: they were found to vary at the two sites. Our results suggest that the aeromycological profile is quite uniform over the British Isles, but a description of bioaerosols with respect to overall load and daily concentration can be quite diverse although the geographical difference between sites is relatively small. These variations in the concentrations therefore need to be explored at the national level