Characterization of a glucose- and solvent-tolerant extracellular tannase from Aspergillus phoenicis

Tannases have attracted wider attention because of their biotechnological potential, especially enzymes from filamentous fungi and other microorganisms. However, the biodiversity of these microorganisms has been poorly explored, and few strains were identified for tannase production and characterization. This article describes the production, purification and characterization of a glucose- and solvent-tolerant extracellular tannase from Aspergillus phoenicis. High enzymatic levels were obtained in Khanna medium containing tannic acid up to 72 h at 30 °C under 100 rpm. The purified enzyme with 65% of carbohydrate content had an apparent native molecular mass of 218 kDa with subunits of 120 kDa and 93 kDa and was stable at 50 °C for 1 h. Optima of temperature and pH were 60 °C and 5.0-6.5, respectively. The enzyme was not affected significantly by most ions, detergents and organic solvents. While glucose did not affect the tannase activity, the addition of a high concentration of gallic acid did. The Km values were 1.7 mM (tannic acid), 14.3 mM (methyl-gallate) and 0.6 mM (propyl-gallate). The enzyme was able to catalyze the transesterification reaction to produce propyl-gallate. All biochemical properties suggest the biotechnological potential of the glucose- and solvent-tolerant tannase from A. phoenicis. © 2012 Elsevier B.V. All rights reserved.

Perdas qualitativas na colheita mecanizada de sementes de soja

The study aimed to assess the physical and physiological characteristics of soybean seeds collected in grain tank and the outlet of the discharge tube of the harvester, depending on the year and the forward speed of the harvester. The experimental design was completely randomized in a factorial 2 x 2 x 2 tested two harvesters of different years, two displacement's speeds and two locations of sample collection, totaling eight treatments with four replications. The harvest of soybean cv. COODETEC 217, was performed with two tangential harvesters, aged three and four years, with 900 rpm rotation of the cylinder, operating at forward speeds of 4 ± 0.5 km h-1 and 7 ± 0.5 km h-1. Seed samples (approximately 3 kg) were withdrawn at the grain tank and the outlet of the discharge tube of the harvester and subjected to determinations of water content in field and laboratory. Subsequently, we evaluated purity, mechanical damage, germination and seed vigor. The younger harvester had a higher percentage of pure seed and lowest percentage of inert material. The increase in forward speed provides the higher the bands percentage and reduction of percentages of pure seed and inert material. The percentage of inert material was higher for seeds collected in the discharge pipe. The speed increase has positively influenced the emergence in sand for the harvester oldest (4 years) and negatively to the harvester youngest (3 years). At lower speeds the youngest harvester higher percentage of germination in sand.

Coagulation-flocculation of anaerobically treated sugarcane stillage

Anaerobic digestion applied to stillage usually results in treatment performances. However, effluents from anaerobic reactors still present a residual polluting load due to the presence of organic recalcitrant compounds. Additional treatment methods, such as coagulation-flocculation, may be utilized to improve the final effluent quality. In this study, we assessed the processes of coagulation and flocculation for sugarcane stillage samples previously submitted to anaerobic digestion, aiming to obtain optimal conditions for the physicochemical treatment. Natural corn starch and ferric chloride were tested as coagulants. While starch was considered as not suitable for the treatment for the tested conditions, ferric chloride assays presented satisfactory results. The investigated parameters included coagulant solution dose, rapid mixing gradient and time, flocculation gradient and time, and sedimentation time. Their adjusted values at which better performances obtained were, respectively, 1.6 g L-1, 325 rpm, 10 s, 65 rpm, 20 and 20 min. The best color, turbidity, and chemical oxygen demand removal efficiencies were 95, 97, and 65%, respectively. Stillage pH variation to alkaline conditions did not result in improved removal efficiencies. Although relatively high removal efficiencies of constituents were obtained, the final effluent characteristics did not fit regulations of water reuse in the agriculture through fertigation. However, stillage can definitely become more easily managed if better final effluent quality control parameters are achieved, enabling for example effluents discharge in water bodies. © 2013 Copyright Balaban Desalination Publications.

Performance of race instrumentation system in curved root canals: a comprehensive analysis by three study methods

In this study, curved maxillary molar root canals were instrumented with RaCe rotary system to evaluate: 1. the occurrence of canal transportation using a radiographic platform; 2. the action of the instruments on the dentin walls, centering ability and canal enlargement by analysis of digital images; and the percentage of regular dentin surfaces and debris within the canal by histological analysis. Ten mesiobuccal roots of extracted human maxillary molars were embedded in acrylic resin and sectioned at the middle and apical thirds. Root canal shaping was performed using the RaCe rotary system at 250 rpm and 1 Ncm torque. Each instrument set was used five times according to a crowndown technique in the following sequence: 40/0.10, 35/0.08, 25/0.06, 25/0.04, 25/0.02 (working length - WL), 30/0.02 (WL) and 35/0.02 (WL). Each instrument was inserted until resistance was felt and then pulled back, followed by brushing movements towards all canal walls. Each specimen was assessed by three study methods: radiographic platform, digitized image assessment and histological analysis. The radiographic platform showed lack of apical transportation. No statistically significant difference (Wilcoxon test, p>0.05) was found between the middle and apical thirds regarding instrument action on dentin walls, centering ability, area of root canal enlargement, percentage of regular dentin surfaces and debris within the root canal. It may be concluded that RaCe system is a suitable method for the preparation of curved root canals, regarding the maintenance of root canal original path, action on dentin walls, canal enlargement and removal of debris from the root canal lumen.

Test-retest reliability of a 3-min isokinetic all-out test using two different cadences

Objectives: To investigate the test-retest reliability of mechanical parameters derived from a 3-min isokinetic all-out test, performed at 60 and 100 rpm. Reliability and validity of the peak oxygen uptake derived from 3-min isokinetic all-out test were also tested. Design: 14 healthy male subjects completed an incremental ramp testing and four randomized 3-min isokinetic all-out test (two at 60 rpm and two at 100 rpm). Methods: The absolute and relative reliability of the following parameters were analyzed: peak power, mean power, end power, fatigue index, work performed above end power and peak oxygen uptake. Results: No difference was found between each two sets of data, although there were between-cadence differences for peak power, mean power, end power, and fatigue index. Higher intra-class correlation (ICC) and lower coefficient of variation (CV) were found for end power (ICC = 0.91 and 0.95; CV = 5.6 and 5.7%) and mean power (ICC = 0.97 and 0.98; CV = 2.4 and 3.1%), than for peak power (ICC = 0.81 and 0.84; CV = 8.7 and 10%) and work performed above end power (ICC = 0.79 and 0.84; CV = 7.9 and 10.6%; values reported for 60 rpm and 100 rpm, respectively). High reliability scores were also observed for peak oxygen uptake at both cadences (60 rpm, CV = 3.2%; 100 rpm, CV = 2.3%,) with no difference with the incremental ramp testing peak oxygen uptake. Conclusions: The power profile and peak oxygen uptake of a 3-min isokinetic all-out test are both highly reliable, whether the test is performed at 60 or 100 rpm. Besides, peak oxygen uptake and work performed above end power were not affected by the change in cadence while peak power, mean power, end power, and fatigue index were. © 2013.

Estudo clínico comparativo do aquecimento por eletroestimulação ou bicicleta estacionária como preparação ao alongamento muscular

Pós-graduação em Bases Gerais da Cirurgia - FMB

Purificação e caracterização bioquímica da invertase extracelular produzida pelo fungo filamentoso Aspergillus terreus

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo comprarativo da biossorção dos metais terras-raras ('ND POT. +3', 'LA POT. +3', 'CE POT. +3') pela biomassa melanizada e pigmento, na forma livre e imobilizada, obtidos do fungo Aspergillus nidulans

Pós-graduação em Biotecnologia - IQ

Produção de xilanases por Aspergillus niger utilizando planejamento experimental: purificação de xilanase

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Influência de fontes de N na produção de ácido clavulânico por Streptomyces clavuligerus

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo da composição de meios de cultura para a produção de cefamicina C por Streptomuces clavuligerus

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Produção de levana por Bacillus subtilis e Zymomonas mobilis utilizando três meios de cultura sintéticos e um alternativo (caldo de cana-de-açucar)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Seleção de um suporte sintético para imobilizar células do Botryospaheria rhodina e comparação da produção de lacase por células livres e imobilizadas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Produção de exopolissacarídeos por Lactobacillus helveticus autócne isoldao de soro-fermento natural

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Atividade antioxidante dos extratos de shiitake (Lentinus edodes) e de cogumelo do sol (Agaricus blazei) aplicados em óelo de soja sob aquecimento

Pós-graduação em Engenharia e Ciência de Alimentos - IBILCE