Influence of concrete composition on anchorage bond behavior of prestressing reinforcement

An experimental research addressing the effects of concrete composition and strength on anchorage bond behavior of prestressing reinforcement is presented to clarify the effect of material properties that have appeared contradictory in previous literature. Bond stresses and anchorage lengths have been obtained in twelve concrete mixes made up of different cement contents (C) – 350 to 500 kg/m3 – and water/cement (w/c) ratios – 0.3 to 0.5 – with compressive strength at 24 h ranging from 24 to 55 MPa. A testing technique based on measuring the prestressing force in specimens with different embedment lengths has been used. The results show that anchorage length increases when w/c increases, more significantly when C is higher; the effect of C reveals different trends based on w/c. The obtained anchorage bond stresses are greater for higher concrete compressive strength, and their average ratio of 1.45 with respect to transmission bond stresses implies a potential bond capacity.

Evaluation of sources of uncertainties in microtensile bond strength of dental adhesive system for different specimen geometries

Objective: The aim of this research is to use finite element analysis (FEA) to quantify the effect of the sample shape and the imperfections induced during the manufacturing process of samples on the bond strength and modes of failure of dental adhesive systems through microtensile test. Using the FEA prediction for individual parameters effect, estimation of expected variation and spread of the microtensile bond strength results for different sample geometries is made. Methods: The estimated stress distributions for three different sample shapes, hourglass, stick and dumbbell predicted by FEA are used to predict the strength for different fracture modes. Parameters such as the adhesive thickness, uneven interface of the adhesive and composite and dentin, misalignment of axis of loading, the existence of flaws such as induced cracks during shaping the samples or bubbles created during application of the adhesive are considered. Microtensile experiments are performed simultaneously to measure bond strength and modes of failure. These are compared with the FEA results. Results: The relative bonding strength and its standard deviation for the specimens with different geometries measured through the microtensile tests confirm the findings of the FEA. The hourglass shape samples show lower tensile bond strength and standard deviation compared to the stick and dumbbell shape samples. ANOVA analysis confirms no significant difference between dumbbell and stick geometry results, and major differences of these two geometries compared to hourglass shape measured values. Induced flaws in the adhesive and misalignment of the angle of application of load have significant effect on the microtensile bond strength. Using adhesive with higher modulus the differences between the bond strength of the three sample geometries increase. Significance: The result of the research clarifies the importance of the sample geometry chosen in measuring the bond strength. It quantifies the effect of the imperfections on the bond strength for each of the sample geometries through a systematic and all embracing study. The results explain the reasons of the large spread of the microtensile test results reported by various researchers working in different labs and the need for standardization of the test method and sample shape used in evaluation of the dentin-adhesive bonding system. © 2007 Academy of Dental Materials.

Modelling Static and Dynamic FRP-Concrete Bond Behaviour Using a Local Concrete Damage Model

This paper presents a study on the bond behaviour of FRP-concrete bonded joints under static and dynamic loadings, by developing a meso-scale finite element model using the K&C concrete damage model in LS-DYNA. A significant number of single shear experiments under static pull-off loading were modelled with an extensive parametric study covering key factors in the K&C model, including the crack band width, the compressive fracture energy and the shear dilatation factor. It is demonstrated that the developed model can satisfactorily simulate the static debonding behaviour, in terms of mesh objectivity, the load-carrying capacity and the local bond-slip behaviour, provided that proper consideration is given to the selection of crack band width and shear dilatation factor. A preliminary study of the effect of the dynamic loading rate on the debonding behaviour was also conducted by considering a dynamic increase factor (DIF) for the concrete strength as a function of strain rate. It is shown that a higher loading rate leads to a higher load-carrying capacity, a longer effective bond length, and a larger damaged area of concrete in the single shear loading scenario.

Ethanol Steam Reforming on Rh Catalysts: Theoretical and Experimental Understanding

Through combined theoretical and experimental efforts, the reaction mechanism of ethanol steam reforming on Rh catalysts was studied. The results suggest that acetaldehyde (CH3CHO) is an important reaction intermediate in the reaction on nanosized Rh catalyst. Our theoretical work suggests that the H-bond effect significantly modifies the ethanol decomposition pathway. The possible reaction pathway on Rh (211) surface is suggested as CH3CH2OH -> CH3CH2O -> CH3CHO -> CH3CO -> CH3 + CO -> CH2 + CO -> CH + CO -> C + CO, followed by the water gas shift reaction to yield H-2 and CO2. In addition, we found that the water-gas shift reaction, not the ethanol decomposition, is the bottleneck for the overall ethanol steam reforming process. The CO + OH association is considered the key step, with a sizable energy barrier of 1.31 eV. The present work first discusses the mechanisms and the water effect in ethanol steam reforming reactions on Rh catalyst from both theoretical and experimental standpoints, which may shed light on designing improved catalysts.

Mer and fac isomerism in tris chelate diimine metal complexes

In this perspective, we highlight the issue of meridional (mer) and facial (fac) orientation of asymmetrical diimines in tris-chelate transition metal complexes. Diimine ligands have long been the workhorse of coordination chemistry, and whilst there are now good strategies to isolate materials where the inherent metal centered chirality is under almost complete control, and systematic methodologies to isolate heteroleptic complexes, the conceptually simple geometrical isomerism has not been widely investigated. In systems where the two donor atoms are significantly different in terms of the σ-donor and π-accepting ability, the fac isomer is likely to be the thermodynamic product. For the diimine complexes with two trigonal planar nitrogen atoms there is much more subtlety to the system, and external factors such as the solvent, lattice packing and the various steric considerations play a delicate role in determining the observed and isolable product. In this article we discuss the possibilities to control the isomeric ratio in labile systems, consider the opportunities to separate inert complexes and discuss the observed differences in their spectroscopic properties. Finally we report on the ligand orientation in supramolecular systems where facial coordination leads to simple regular structures such as helicates and tetrahedra, but the ability of the ligand system to adopt a mer orientation enables self-assembled structures of considerable beauty and complexity. 

Bond behavior of NSM FRP strips between two adjacent cracks in concrete beams: A numerical study

Strengthening RC structures with near-surface mounted (NSM) fibre reinforced polymer (FRP) composites has a number of advantages compared with that with externally bonded (EB) FRP sheets/plates. As with EB FRP, the performance of the bond between NSM FRP and concrete is one of the key factors affecting the behaviour of the strengthened structure. This paper presents a numerical investigation into the behaviour of NSM FRP loaded at its both ends to simulate the NSM FRP-toconcrete bond between two adjacent cracks in RC members. The main objective of this study is to quantitatively clarify the effect of the bondline damage during slip reversal on the ultimate load (bond strength). The results show that the bondline damage has a significant effect on the load-carrying capacity of the NSM FRP-to-concrete bonded interface and should be considered in FE modeling of the interface.

Methanol electro-oxidation on platinum modified tungsten carbides in direct methanol fuel cells: a DFT study

In exploration of low-cost electrocatalysts for direct methanol fuel cells (DMFCs), Pt modified tungsten carbide (WC) materials are found to be great potential candidates for decreasing Pt usage whilst exhibiting satisfactory reactivity. In this work, the mechanisms, onset potentials and activity for electrooxidation of methanol were studied on a series of Pt-modified WC catalysts where the bare W-terminated WC(0001) substrate was employed. In the surface energy calculations of a series of Pt-modified WC models, we found that the feasible structures are mono- and bi-layer Pt-modified WCs. The tri-layer Pt-modified WC model is not thermodynamically stable where the top layer Pt atoms tend to accumulate and form particles or clusters rather than being dispersed as a layer. We further calculated the mechanisms of methanol oxidation on the feasible models via methanol dehydrogenation to CO involving C-H and O-H bonds dissociating subsequently, and further CO oxidation with the C-O bond association. The onset potentials for the oxidation reactions over the Pt-modified WC catalysts were determined thermodynamically by water dissociation to surface OH* species. The activities of these Pt-modified WC catalysts were estimated from the calculated kinetic data. It has been found that the bi-layer Pt-modified WC catalysts may provide a good reactivity and an onset oxidation potential comparable to pure Pt and serve as promising electrocatalysts for DMFCs with a significant decrease in Pt usage.

The effect of the 'Gait keeper' mutation in the DMRT3 gene on gaiting ability in Icelandic horses

A nonsense mutation in DMRT3 ('Gait keeper' mutation) has a predominant effect on gaiting ability in horses, being permissive for the ability to perform lateral gaits and having a favourable effect on speed capacity in trot. The DMRT3 mutant allele (A) has been found in high frequency in gaited breeds and breeds bred for harness racing, while other horse breeds were homozygous for the wild-type allele (C). The aim of this study was to evaluate further the effect of the DMRT3 nonsense mutation on the gait quality and speed capacity in the multigaited Icelandic horse and demonstrate how the frequencies of the A- and C- alleles have changed in the Icelandic horse population in recent decades. It was confirmed that homozygosity for the DMRT3 nonsense mutation relates to the ability to pace. It further had a favourable effect on scores in breeding field tests for the lateral gait tölt, demonstrated by better beat quality, speed capacity and suppleness. Horses with the CA genotype had on the other hand significantly higher scores for walk, trot, canter and gallop, and they performed better beat and suspension in trot and gallop. These results indicate that the AA genotype reinforces the coordination of ipsilateral legs, with the subsequent negative effect on the synchronized movement of diagonal legs compared with the CA genotype. The frequency of the A-allele has increased in recent decades with a corresponding decrease in the frequency of the C-allele. The estimated frequency of the A-allele in the Icelandic horse population in 2012 was 0.94. Selective breeding for lateral gaits in the Icelandic horse population has apparently altered the frequency of DMRT3 genotypes with a predicted loss of the C-allele in relatively few years. The results have practical implications for breeding and training of Icelandic horses and other gaited horse breeds.

Periplasmic nitrate reductase revisited: a sulfur atom completes the sixth coordination of the catalytic molybdenum

J Biol Inorg Chem. 2008 Jun;13(5):737-53. doi: 10.1007/s00775-008-0359-6

Systematic studies of the effect of pressure on magnetic and electronic properties of La2/3Ca1/3MnO3 thin films with various thicknesses /

Interest in mixed-valent perovskite manganese oxides of La\-xAxMnO^ (v4-divalent alkaline earth Ca, Sr or Ba), whose unusual properties were discovered nearly a half century ago, has recently been revived. The discovery of the colossal magnetoresistance and pressure effects introduced new questions concerning the complex interplay between lattice structure, magnetism and transport in doped perovskite manganites. In this study, we report our experimental investigations of pressure and magnetic field dependencies of La-i/sCai/sMnOs (LCMO) epitaxial films with various thickness on SrTiO$ substrate. An analysis of film thickness dependency of the resistivity of LCMO epitaxial films under pressure and magnetic field has been performed by taking into account substrate contributions. This verifies the correlation of lattice distortion with magnetic and transport properties. Strong dependencies of Mn — O — Mn bond bending and Mn — O bond stretching with pressure as well as Mn spin alignment with magnetic field, and the lattice distortion induced by the substrate are discussed.

Fast atom bombardment mass spectrometry studies of ruthenium (II) polypyridy coordination complexes and of group V Triptycenes and related complexes

In order to investigate the use of Fast Atom Bombardment Mass Spectrometry (FAB-MS) as a tool for structural characterization, two groups of complexes are analyzed. The first group is a set of ruthenium(II) coordination complexes containing bidentate polypyridyl ligands. The positive and negative ion FAB-MS spectra are found to be sufficient to allow for an almost complete characterization of the central metal atom, the ligands and the counter anions contained in the intact complex. An unusual observation of mUltiply charged ions in the positive ion FAB-MS spectra (i.e. [RUL 3 ]2+) is explained to be as a result of the oxidative quenching of the excited state of the doubly charged ion by the matrix, 3-nitrobenzyl alcohol. An analysis of a mixture shows that the technique is a good one for identifying components therein. A group of triptycene and related complexes containing Group V elements is also analyzed by FAB-MS and the results. in terms of relative abundances of fragment ions, are found to be consistent with known metal-carbon bond strengths.

The effect of an eight session skate treadmill and agility training program on the degree of separation in ice hockey players

The sport of ice hockey places multiple simultaneous demands on the physiological, mechanical, and cognitive abilities of individual players. The purpose of the study was to investigate the effect of an eight session degree of separation (DOS) training intervention on sport specific measures of skating, stick handling and puck control movements in competitive ice hockey players. All participants completed a battery of pre and pos t skill and DOS specific tests designed to evaluate DOS abilities: Ttest of agility, a modified Cunningham Faulkner test of anaerobic capacity performed on a skate treadmill and a DOS skate treadmill test. Statistically significant differences were found between groups on the post test scores, meaning that the training intervention had a specific effect on the post test scores of the experimental group (p~O.05). Results of this investigation suggested that a DOS specific training program has the potential to enhance the integration and automation of or sequencing and coordination of uncoordinated ice hockey movements.

The Mediating Role of Perceived Scholastic Competence in the Relationship Between Motor Coordination and Academic Performance

Children with developmental coordination disorder (DCD) are often referred to as clumsy because of their compromised motor coordination. Clumsiness and slow movement performances while scripting in children with DCD often result in poor academic performance and a diminished sense of scholastic competence. This study purported to examine the mediating role of perceived scholastic competence in the relationship between motor coordination and academic performance in children in grade six. Children receive a great deal of comparative information on their academic performances, which influence a student's sense of scholastic competence and self-efficacy. The amount of perceived academic self-efficacy has significant impact on academic performance, their willingness to complete academic tasks, and their self-motivation to improve where necessary. Independent t-tests reveal a significant difference (p < .001) between DCD and non-DCD groups when compared against their overall grade six average with the DCD group performing significantly lower. Independent t-tests found no significant difference between DCD and non-DCD groups for perceived scholastic competence. However, multiple linear regression analysis revealed a significant mediating role of 15% by perceived scholastic competence when examining the relationship between motor coordination and academic performance. While children with probable DCD may not rate their perceived scholastic competence as less than their healthy peers, there is a significant mediating effect on their academic performance.

Développement de nouveaux matériaux organométalliques pour des applications dans le domaine de la conversion d’énergie solaire

Dans un contexte où l’approvisionnement énergétique mondial du 21e siècle est un enjeu majeur, le développement de sources d’énergie renouvelables suscite l’attention croissante de la communauté scientifique et industrielle. L’énergie solaire est définitivement l’une des meilleures alternatives aux combustibles fossiles en tant que source d’énergie du monde de demain. Ce mémoire traite donc du développement de nouveaux matériaux organométalliques pour des applications de photorécoltage d’énergie en photovoltaïque et en production d’hydrogène. Le premier chapitre présente la synthèse assistée par microondes de quatre nouveaux complexes de Co(II), Ni(II), Cu(II) et Zn(II) basés sur le ligand tétra-p-méthoxyphényl-azadipyrrométhène (ADPM) avec des rendements variant de 89% à quantitatif. Ces complexes sont mis en relation avec d’autres complexes homoleptiques connus portant le tétraphényl-ADPM comme ligand ainsi qu’avec leurs chélates de BF2+ pour une meilleure compréhension des tendances engendrées par la substitution de l’agent coordonnant et/ou des substituants p-méthoxy. Pour ce faire, le comportement électrochimique et photophysique est présenté. De façon générale, la présence des quatre groupements p-méthoxy semble rendre les dérivés de cet ADPM plus susceptibles à la dégradation électrochimique en conditions d’oxydation et induire un déplacement bathochromique des propriétés optiques d’absorption et d’émission. Les structures rayons X du ligand tétra-p-méthoxyphényl-ADPM et de son complexe homoleptique de Co(II) sont aussi discutées. Cette étude a été effectuée dans l’espoir de fournir des informations utiles sur la stabilité des ADPM aux chercheurs du domaine photovoltaïque en quête de nouveaux chromophores dans le proche infrarouge (NIR). Le deuxième chapitre présente quant à lui les propriétés de senseur envers les anions F-, OAc- et H2PO4- de deux nouveaux complexes neutres de Re(I) de type mono- et dinucléaire basés sur une phénanthroline substituée en position 5 contenant un récepteur thio-urée. Ces composés ont été obtenus dans des rendements de 81% et 60%, respectivement. L’effet de la formation de ponts hydrogène lors de l’ajout d’anions versus la déprotonation du récepteur a été évalué par des titrations UV/Vis et RMN 1H et semble indiquer que la formation de la base conjuguée du récepteur est favorisée pour ce type de système. De plus, la structure rayons X d’un des précurseurs est présentée et permet une discussion sur la chiralité des complexes mono- et dinucléaire obtenus. L’obtention d’un complexe bimétallique par autoassemblage ouvre la voie à la préparation d’antennes moléculaires pour des systèmes de photosynthèse artificielle.

L'enchaînement de phrases par coordination et par subordination à l'écrit chez les élèves de première secondaire : mise à l'essai d'une séquence didactique

Ce mémoire de maîtrise propose une séquence didactique travaillant l’enchaînement de phrases par subordination et coordination en vue de favoriser le transfert de connaissances grammaticales en situation de production écrite. Nous avons d’abord fait ressortir que les élèves apprennent et revoient diverses règles de grammaire, mais qu’ils ont une grande difficulté à transférer ces connaissances en contexte d’écriture. Plusieurs chercheurs soulignent la pertinence de décloisonner l’enseignement de la grammaire et de l’écriture (Paret, 1992; Chartrand, 2003; Bilodeau, 2005) pour favoriser le transfert, notamment au moyen de la démarche active de découverte (Chartrand, 1996). Nous nous sommes intéressée à la syntaxe de la phrase, plus précisément à la construction de phrases complexes par enchaînement. Nous considérons les notions grammaticales qui en découlent difficiles pour plusieurs élèves et nous constatons que cet enseignement se fait peu fréquemment et souvent de manière magistrale, sans travailler l’écriture en parallèle. Nous avons donc élaboré une séquence didactique travaillant ces concepts grammaticaux, tout en ayant en tête de favoriser le transfert des notions grammaticales vers un contexte d’écriture. Nous avons ensuite mis à l’essai cette séquence dans un groupe de première secondaire et avons vérifié son efficacité à l’aide d’un prétest et d’un posttest (production écrite). Nous avons pu constater que la séquence didactique expérimentée dans le cadre de ce mémoire produit de bons résultats. Il y a une amélioration notable dans les enchaînements de phrases dans les textes produits par les élèves. Par contre, nous n’avons pas pu conclure que ceux-ci étaient significatifs d’un point de vue statistique. La séquence didactique semble toutefois aider les élèves, même les plus faibles, puisque les entretiens métagraphiques montrent qu’ils ont meilleure compréhension des enchaînements de phrases.