Estudo de adsorvente obtido de terras diatomáceas para remoção de metais pesados em águas produzidas: processamento, caracterização e dinâmica em leito fixo

The acceleration of industrial growth in recent decades on all continents aroused the interest of the companies to counter the impacts produced on the environment, spurred primarily by major disasters in the petroleum industry. In this context, the water produced is responsible for the largest volume of effluent from the production and extraction of oil and natural gas. This effluent has in its composition some critical components such as inorganic salts, heavy metals (Fe, Cu, Zn, Pb, Cd, ), presence of oil and chemicals added in the various production processes. In response to impact, have been triggered by research alternative adsorbent materials for water treatment and water produced, in order to removing oils and acids and heavy metals. Many surveys of diatomaceous earth (diatomite) in Brazil involve studies on the physico-chemical, mineral deposits, extraction, processing and applications. The official estimated Jazi are around 2.5 million tonnes, the main located in the states of Bahia (44%) and Rio Grande do Norte (37,4%). Moreover, these two states appear as large offshore producers, earning a prominent role in research of adsorbents such as diatomite for treatment of water produced. Its main applications are as an agent of filtration, adsorption of oils and greases, industrial load and thermal insulator. The objective of this work was the processing and characterization of diatomite diatomaceous earth obtained from the municipality of Macaíba-RN (known locally as tabatinga) as a low cost regenerative adsorbent for removal of heavy metals in the application of water produced treatment. In this work we adopted a methodology for batch processing, practiced by small businesses located in producing regions of Brazil. The characterization was made by X-ray diffraction (XRD), scanning electron microscopy (SEM) and specific surface area (BET). Research conducted showed that the improvement process used was effective for small volume production of diatomite concentrated. The diatomite obtained was treated by calcination at temperature of 900 oC for 2 hours, with and without fluxing Na2CO3 (4%), according to optimal results in the literature. Column adsorption experiments were conducted to percolation of the in nature, calcined and calcined fluxing diatomites. Effluent was used as a saline solution containing ions of Cu, Zn, Na, Ca and Mg simulating the composition of produced waters in the state of Rio Grande do Norte, Brazil. The breakthrough curves for simultaneous removal of copper ions and zinc as a result, 84.3% for calcined diatomite and diatomite with 97.3 % for fluxing. The calcined fluxing diatomite was more efficient permeability through the bed and removal of copper and zinc ions. The fresh diatomite had trouble with the permeability through the bed under the conditions tested, compared with the other obtained diatomite. The results are presented as promising for application in the petroleum industry

Análise histórico-comparativa da helicicultura na Colômbia

Dissertação (mestrado)—Universidade de Brasília, Faculdade de Agronomia e Medicina Veterinária, Programa de Pós-Graduação em Agronegócios, 2016.

Examining Levels of Automation in the Wood Processing Industry - A case study

Companies operating in the wood processing industry need to increase their productivity by implementing automation technologies in their production systems. An increasing global competition and rising raw material prizes challenge their competitiveness. Yet, too extensive automation brings risks such as a deterioration in situation awareness and operator deskilling. The concept of Levels of Automation is generally seen as means to achieve a balanced task allocation between the operators’ skills and competences and the need for automation technology relieving the humans from repetitive or hazardous work activities. The aim of this thesis was to examine to what extent existing methods for assessing Levels of Automation in production processes are applicable in the wood processing industry when focusing on an improved competitiveness of production systems. This was done by answering the following research questions (RQ): RQ1: What method is most appropriate to be applied with measuring Levels of Automation in the wood processing industry? RQ2: How can the measurement of Levels of Automation contribute to an improved competitiveness of the wood processing industry’s production processes? Literature reviews were used to identify the main characteristics of the wood processing industry affecting its automation potential and appropriate assessment methods for Levels of Automation in order to answer RQ1. When selecting the most suitable method, factors like the relevance to the target industry, application complexity or operational level the method is penetrating were important. The DYNAMO++ method, which covers both a rather quantitative technical-physical and a more qualitative social-cognitive dimension, was seen as most appropriate when taking into account these factors. To answer RQ 2, a case study was undertaken at a major Swedish manufacturer of interior wood products to point out paths how the measurement of Levels of Automation contributes to an improved competitiveness of the wood processing industry. The focus was on the task level on shop floor and concrete improvement suggestions were elaborated after applying the measurement method for Levels of Automation. Main aspects considered for generalization were enhancements regarding ergonomics in process design and cognitive support tools for shop-floor personnel through task standardization. Furthermore, difficulties regarding the automation of grading and sorting processes due to the heterogeneous material properties of wood argue for a suitable arrangement of human intervention options in terms of work task allocation.  The application of a modified version of DYNAMO++ reveals its pros and cons during a case study which covers a high operator involvement in the improvement process and the distinct predisposition of DYNAMO++ to be applied in an assembly system.

El mandato por el Agua y su aplicación a una organización colombiana

Actualmente las organizaciones en su búsqueda por ser ecoeficientes y generar una mejor practica en sus procesos productivos, ha buscado generar herramientas y mediciones que le permitan llevar a cabo una producción más limpia. Es por ello que en su afán han buscado una manera óptima de abordar un tema de preocupación mundial; el manejo del agua. Esta investigación tiene como eje central aterrizar al idioma español, el mandato por el agua un documento dado a conocer por el pacto global, el cual contiene herramientas, métricas y guías sobre el manejo del agua en las organizaciones. Adicional a esto la presente investigación pretende ver su pertinencia al contexto colombiano mediante la aplicación en a una organización.

Gestión de la cadena de suministro de Bimbo

El presente trabajo es un informe final sobre los procesos de producción, logística y distribución de la empresa Bimbo. El informe está conformado por aspectos teóricos y prácticos, de esta manera, brinda información clara y concreta sobre los antecedentes más importantes de esta organización y su contribución a la productividad del país. La información presentada ha sido recolectada mediante una revisión teórica y una visita a sus instalaciones en Veracruz, México. De esta manera, se han estudiado sus procesos y logística de producción y cómo contribuyen en la eficiencia y calidad de la empresa; así mismo, son fundamentales para diagnosticar los aspectos a mejorar de la entidad. Por otro lado, gracias a la visita, se logró desarrollar habilidades administrativas que hasta el momento solo estaban en teoría. Llegar a un contexto real y con problemáticas evidentes permitió consolidar el aprendizaje que se obtuvo durante años en la carrera para plasmarlos en la labor. Así mismo, el detallar las instalaciones de Bimbo permitió alcanzar una mayor perspectiva con respecto a los aspectos importantes dentro del panorama organizacional; tales como la producción, la gestión y mejora de los procesos de la compañía. Esto se logró realizando labores correspondientes a la inspección, observación, revisión de logística y el análisis de los procesos productivos. El trabajo práctico indudablemente sirvió para acrecentar los conocimientos obtenidos en la universidad.

Nuevas tendencias en la Supply Management en Colombia y México

La Misión empresarial a México 2015, tiene como propósito brindar a los estudiantes espacios para el crecimiento profesional, mediante la aplicación de los conceptos y los modelos estudiados en las diferentes visitas empresariales que se realizaron. Se pretende conocer cuáles son las nuevas tendencias en el manejo y administración de la cadena de abastecimiento de las empresas, de manera que estos conceptos puedan ser aplicados en diferentes tipos de empresas. Se realizó una investigación de cada una de las empresas que fueron visitadas realizando un análisis de un punto clave en cada una, por ejemplo, se describe la política “Think Blue” empleada por el grupo Volkswagen para el éxito y reconocimiento empresarial en la logística verde, y se analizan los principales procesos de producción de la planta productora del grupo Modelo, entre otras. Por otra parte, se analiza el modelo de gestión logística para pequeñas y medianas empresas, desarrollado en la Universidad Popular Autónoma del Estado de Puebla, el cual puede ser usado como base para el progreso y fortalecimiento de las pymes en nuestro país.

Energy consumption and energy efficiency in olive oil mills: case studies in Portugal and Spain in the frame of TESLA project

TESLA project (Transfering Energy Save Laid on Agroindustry) financed by the European Commission, had the main goals of evaluating the energy consumption and to identify the best available practices to improve energy efficiency in key agro-food sectors, such as the olive oil mills. A general analysis of energy consumptions allowed identifying the partition between electrical and thermal energy (approximately 50%) and the production processes responsible for the higher energy consumptions, as being the in the mill and paste preparation and the phases separation. Some measures for reducing energy waste and for improving energy efficiency were identified and the impact was evaluated by using the TESLA tool developed by Circe and available at the TESLA website.

Arquiteturas do trigo: espaços de silagem no Alentejo, do século XIX à atualidade

O presente trabalho de investigação apresenta um estudo sistemático da expressão arquitetónica que teve na região do Alentejo a implantação agro-industrial da cultura do trigo, em especial, durante a "Campanha do Trigo", iniciada em 1929 e prosseguida durante o Estado Novo, até 1969. Para tanto, procede ao mapeamento dos elementos edificados, em ligação com os processos de produção, silagem e moagem industrial do trigo, bem como ao seu transporte, estabelecendo uma análise comparativa com outras regiões e países, com o intuito de revelar o impacto destes equipamentos nos diversos territórios e paisagens. Assim, procura-se compreender as relações que se estabeleceram entre a forma arquitetónica do silo (cujo desenho resulta fundamentalmente de uma resposta programática intrinsecamente ligada à sua função primordial - armazenamento do cereal) e os lugares, onde se implantaram e com os quais se procuraram articular, e as paisagens, com as quais perspetivaram dialogar. Para tal, procede-se a descrição do estado atual de cada exemplar das denominadas "arquiteturas do trigo", com o objetivo de gerar, num primeiro nível, o entendimento de cada caso em particular e, posteriormente, estabelecer, por efeito de comparação, um confronto, quer entre os diferentes contextos em que se inserem, quer entre as suas caraterísticas formais, de modo a tirar ilações que possibilitem problematizar o seu uso futuro, equacionando diferentes perspetivas de atuação sobre o edificado. Finalmente procura-se introduzir uma discussão segundo diferentes orientações e posicionamentos, de modo a invocar perspetivas de atuação sobre os silos, que se adequem a cada situação específica, a cada contexto e a cada lugar. É no confronto entre as abordagens enunciadas, que se evidencia, mais do que a pertinência, a emergência social e cultural de uma ação diligente, quer ao nível particular de cada peça silar, quer do sistema, do qual era parte integrante a linha de caminho de ferro, que através do seu traçado permitia interligar todas as peças silares e garantir o seu funcionamento a escala industrial; ABSTRACT: This research presents a systematic study of architectural expression of wheat crop agro-industrial development, in particular the "Wheat Campaign", started in 1929 and continue during the "New State", until 1969. We first proceed to map the built elements related to production processes, silage and wheat industrial grinding, as well as the ways of transportation, establishing a comparative analysis with other countries and regions, in order to reveal the impact of these objects in various territories and landscapes. We seek to understand the relationships between the architectural form of the silo (whose design is mainly a result of an intrinsically programmatic response linked to its primary function - cereal storage) and the places where they are implemented and the landscapes which they sought to communicate and articulate. Secondly, we describe the current status of each copy of the "wheat architectures" in Alentejo, with the main objective of attain, at first, the understanding of each particular case and, then, to establish a connection between the different contexts in which they operate and their formal characteristics, in order to conceive and discuss their future use, equating different perspectives of action in the buildings. Finally seeks to introduce a discussion according to different orientations and positions in order to invoke prospects for action on the grain elevators that are appropriate to each specific situation, every context and every place. It is the clash between the stated approaches, which shows more than the relevance, it shows social and cultural emergence of a diligent action on the particular level of each grain elevator on the system, which was an integral part of the railway, which through its tracing allowed to interconnect all grain elevators and assure its operation on an industrial scale

Morphological and chemical characterization of tintypes and ambrotypes

The present work was done on two ambrotypes and two tintypes. It aimed evaluate their chemical and physical characteristics, especially their degradation patterns. Moreover, to understand the materials used for their production and cross-check analytical and historical information about the production processes. To do so multi-analytical, non-destructive methods were applied. Technical photography highlighted the surface morphology of the objects and showed the distribution of the protective coatings on their surfaces through UV radiation, which were very different between the four pieces. OM allowed for a detailed observation of the surfaces along with the selection of areas of interest to be analysed with SEM-EDS. SEM-EDS was the technique used most extensively and the one that provided the most insightful results: it allowed to observe the morphology of the image forming particles and the differences between highlights, dark areas and the interfaces between them. Also, elemental point analysis and elemental maps were used to identify the image forming particles as silver and to detect the presence of compounds related to the production, particularly gold used to highlight jewellery, iron as the red pigment and traces of the compounds used in the photographic process containing Ag, I, Na and S . Also, some degradation compounds were analysed containing Ag, Cu, S and Cl. With μ-FT-IR the presence of collodion was confirmed and the source of the protective varnishes was identified, particularly mastic and shellac, in either mixtures of the two or only one. μ-Raman detected the presence of metallic silver and silver chloride on the objects and identified one of the red pigments as Mars red. Finally, μ-XRD showed the presence of metallic silver and silver iodide on both ambrotypes and tintypes and hematite, magnetite and wuestite on the tintypes; RESUMO: O presente estudo foi desenvolvido sobre dois ambrótipos e dois ferrótipos. O propósito consiste em estudar as suas características químicas e físicas, dando particular ênfase aos padrões de degradação. Também é pretendido compreender os materiais usados na sua produção e relacionar esta informação analítca com dados históricos de manuais técnicos contemporâneos à produção dos objectos. Para tal foram utilizadas técnicas multi-analíticas e não destrutivas. O uso da fotografia técnica permitiu uma observação da morfologia das superficies dos objectos e da distribuição das camadas de verniz através da radiação UV, muito diferente entre os quatro. A microscopia óptica proporcionou uma observação detalhada das superfícies assim como a selecção de pontos de interesse para serem analisados com SEM-EDS. SEM-EDS foi a técnica usada mais extensivamente e a que proporcionou os resultados mais detalhados: observação da morofologia das partículas formadoras da imagem e as diferenças entre zonas de altas luzes, baixas luzes e as interfaces entre elas. A análise elemental e os mapas elementares foram usados para detectar prata nas partículas formadoras da imagem e a presença de compostos relacionados com a produção, em particular ouro utilizado para realçar joalharia, ferro no pigmento vermelho e vestígios de compostos utilizados no processo fotográfico incluindo Ag, I, Na e S. Do mesmo modo, alguns compostos de degradação foram analisados contendo Ag, Cu, S e Cl. Com μ-FT-IR a presença de colódio foi confirmada e identificada a origem dos vernizes, mástique e goma-laca, tanto em misturas dos dois como apenas um. Com μ-Raman foi detectada a presença de prata metálica e de cloreto de prata e identificado um dos pigmentos vermelhos como Mars red. Finalmente, μ-DRX revelou a presença de prata metálica e iodeto de prata tanto nos ambrótipos como nos ferrótipos e hematite, magnetite e wuestite nos ferrótipos.

Strategies for lowering the environmental impact of different electrochemical energy storage system

The continuous growth of global population brings an exponential increase on energy consumption and greenhouse gas emission in the atmosphere contributing to the increase of the planet temperature. Therefore, it is mandatory to adopt renewable energy production systems like photovoltaic or wind power: unfortunately, the main limit of these technologies is the natural intermittence of the energy sources that limits their applicability. The key enabling technology for a widespread usage of clean power sources are electrochemical energy storage systems, most commonly known as batteries. Batteries will enable the storage of energy during overproduction period and the release during low production period stabilizing the power outcome, allowing the connection to the main grid and increasing the applicability of renewable energy sources. Despite the high number of benefits that the widespread use of batteries will bring, starting from the reduction of CO2 emitted in the atmosphere, it is necessary also to take care of the environmental impact of processes and materials used for the production of electrochemical storage systems. In addition, there are many different battery systems, with different chemistries and designs that require specific strategies. Nowadays, the most part of the materials and chemicals used for battery production are toxic for humans and the environment. For this reason, this Ph.D. thesis addresses the challenging scope of lowering the environmental impact of manufacturing processes of different electrochemical energy storage systems using natural derived or low carbon footprint materials while increasing the performances with respect to commercial devices. The activities carried out during my Ph.D. cover a high number of different electrochemical storage systems involving a wide range of electrochemical processes from capacitive to faradic. New materials, different production processes and new battery design, all in view of sustainability and low environmental impact, increased the innovative and challenging aspects of this work.

Sustainability and environmental impact of the Italian ceramic tile industry

The increasing consumption rates among citizens and the uncontrolled exploitation of natural resources have made environmental pollution and management of waste the main problems facing humanity in its upcoming future. Together with generation of energy and transport, industrial production certainly plays a key role in the genesis of these problems. It is for this reason that the concepts of environmental, social and economic sustainability have emerged over the years as the cornerstones for future development. In light of this, the most forward-looking industries have begun to study their impact on environment and society in order to improve their performances and, at the same time, to anticipate the increasingly rigorous environmental regulations. In this work, various performance indicators related to the Italian ceramic tile sector will be presented and discussed. In particular, the emission factor of characteristic pollutants will be reported on a period of up to fifteen years while data regarding waste management, concentration of pollutants and emission legal limits for the last decade will be here disclosed as a result of a vast analysis on recorded data. The collected information describes the present level of performance of the ceramic tile manufacturing industries in Italy and shows how recycling is now a consolidated reality and how some pollutants, such as particulate matter, fluorine and lead are actually disappearing from production processes and how others, such as volatile organic compounds, are increasing instead. Moreover, the adoption of alternative raw materials for the production of ceramic tiles is discussed and the implementation of the recycling of various waste is addressed at experimental or industrial scale. Finally, the development of a new ceramic engobe with high content of waste glass (20%) is presented as an experimental example of reutilization of resources in the ceramic tile industry.

Transition Matters. Il ruolo del designer nella transizione sostenibile e circolare dei materiali polimerici

La ricerca indaga il ruolo del designer nella transizione sostenibile e circolare all’uso di materiali polimerici. Nel contesto contemporaneo la plastica è utilizzata in quasi ogni settore merceologico ma la sua futura applicazione è messa in forte discussione a causa dei visibili impatti ambientali del suo uso irresponsabile. Un passaggio netto dalla totale dipendenza alla liberazione dei polimeri è difficile; è necessario un periodo di transizione che permetta di coesistere responsabilmente con i polimeri in attesa di trovare dei validi sostituti. L’obiettivo della ricerca è lavorare su questo periodo ponendo il designer e le sue competenze come soggetti chiave del movimento. La tesi di ricerca propone un approccio per calare le pratiche del Transition Design nella progettazione di sistemi-prodotto, nutrendosi degli attributi anticipatori dell’Advanced Design e puntando agli obiettivi del Circular Design, lavorando a partire dalle merci più critiche nel contesto contemporaneo: quelle in polimero fossile non riciclabile. Contributo della tesi è la figura del Transition Matter Designer, un progettista di transizioni dei materiali che prevede metamorfosi di sistemi-prodotto nel tempo grazie alle sue competenze a diverse scale del progetto: forma l’utente agli atteggiamenti circolari e sostenibili, caratterizza i materiali per individuarne nuovi usi, seleziona i processi produttivi adatti a prevenire scarti e ne anticipa i cicli di vita nei prodotti. I Knitted Fasteners sono il risultato della simulazione del lavoro del Transition Matter Designer nel tessile: un sistema di elementi di fissaggio, personalizzabili dallo stilista e integrati negli abiti a maglia, che permettono di eliminare l’uso di fashion fasteners in plastica e metallo, elementi che rendono difficile il riciclo dei capi. Dalla sperimentazione è emerso il modello concettuale della Transindustrial Production: un lavoro di collaborazione fra Transition Matter Designer e creativo per dare identità ai materiali polimerici circolari attraverso l’ibridazione fra artigianato e industria, tipico del Made in Italy.

Industrial Demilitarized Zone and Zero Trust cybersecurity models for Industrial Control Systems

Today more than ever, with the recent war in Ukraine and the increasing number of attacks that affect systems of nations and companies every day, the world realizes that cybersecurity can no longer be considered just as a “cost”. It must become a pillar for our infrastructures that involve the security of our nations and the safety of people. Critical infrastructure, like energy, financial services, and healthcare, have become targets of many cyberattacks from several criminal groups, with an increasing number of resources and competencies, putting at risk the security and safety of companies and entire nations. This thesis aims to investigate the state-of-the-art regarding the best practice for securing Industrial control systems. We study the differences between two security frameworks. The first is Industrial Demilitarized Zone (I-DMZ), a perimeter-based security solution. The second one is the Zero Trust Architecture (ZTA) which removes the concept of perimeter to offer an entirely new approach to cybersecurity based on the slogan ‘Never Trust, always verify’. Starting from this premise, the Zero Trust model embeds strict Authentication, Authorization, and monitoring controls for any access to any resource. We have defined two architectures according to the State-of-the-art and the cybersecurity experts’ guidelines to compare I-DMZ, and Zero Trust approaches to ICS security. The goal is to demonstrate how a Zero Trust approach dramatically reduces the possibility of an attacker penetrating the network or moving laterally to compromise the entire infrastructure. A third architecture has been defined based on Cloud and fog/edge computing technology. It shows how Cloud solutions can improve the security and reliability of infrastructure and production processes that can benefit from a range of new functionalities, that the Cloud could offer as-a-Service.We have implemented and tested our Zero Trust solution and its ability to block intrusion or attempted attacks.

Development of a novel heat treatment for high performances L-PBF Ti6Al4V alloy: microstructural and mechanical characterization

This work presents the experimental development of a novel heat treatment for a high performance Laser Powder Bed Fusion Ti6Al4V alloy. Additive manufacturing production processes for titanium alloys are particularly of interest in cutting-edge engineering fields, however, high frequency laser induced thermal cycles generate a brittle as built microstructure. For this reason, heat treatments compliant with near net shape components are needed before their homologation and usage. The experimental campaign focused on the development of a multi-step heat treatment leading to a bilamellar microstructure. In fact, according to literature, such a microstructure should be promising in terms of mechanical properties both under static and cyclic loads. The heat treatment development has asked for the preliminary analyses of samples annealed and aged in laboratory, implementing several cycles, differing for what concerns temperatures, times and cooling rates. Such a characterization has been carried out through optical and electron microscopy analyses, image analyses, hardness and tensile tests. As a result, the most suitable thermal cycle has been selected and performed using industrial equipment on mini bending fatigue samples with different surface conditions. The same tests have been performed on a batch of traditionally treated samples, to provide with a comparison. This master thesis activity has finally led to the definition of a heat treatment resulting into a bilamellar microstructure, promising in terms of fatigue performances with respect to the traditionally treated alloy ones. The industrial implementation of such a heat treatment will require further improvements, particularly for what concerns the post annealing water quench, in order to prevent any surface alteration potentially responsible for the fatigue performances drop. Further development of the research may also include push-pull fatigue tests, crack grow propagation and residual stresses analyses.

High gravity batch and continuous processes for beer production: Evaluation of fermentation performance and beer quality

This study deals with two innovative brewing processes, high gravity batch and complete continuous beer fermentation systems. The results show a significant influence of the variables such as concentration and temperature on the yield factor of the substrate into ethanol and consequently on the productivity of the high gravity batch process. The technological feasibility of continuous production of beer based on yeast immobilization on cheap alternative carriers was also demonstrated. The influence of process parameters on fermentation performance and quality of the obtained beers was studied by sensorial analysis. No significant difference in the degree of acceptance between the obtained products and some traditional market brands was found. (c) 2008 Institute of Chemistry, Slovak Academy of Sciences.