Molecular characterization and fumonisin production by Fusarium verticillioides isolated from corn grains of different geographic origins in Brazil

Gibberella moniliformis is most commonly associated with maize worldwide and produces high levels of fumonisins, some of the most agriculturally important mycotoxins. Studies demonstrate that molecular methods can be helpful for a rapid identification of Fusarium species and their levels of toxin production. The purpose of this research was to apply molecular methods (AFLP, TEF-1 alpha partial gene sequencing and PCR based on MAT alleles) for the identification of Fusarium species isolated from Brazilian corn and to verify if real time RT-PCR technique based on FUM1 and FUM19 genes is appropriated to estimate fumonisins B(1) and B(2) production levels. Among the isolated strains, 96 were identified as Fusarium verricillioides, and four as other Fusarium species. Concordant phylogenies were obtained by AFLP and TEF-1 alpha sequencing, permitting the classification of the different species into distinct clades. Concerning MAT alleles, 70% of the F. verricillioides isolates carried the MAT-1 and 30% MAT-2. A significant correlation was observed between the expression of the genes and toxin production r=0.95 and r=0.79 (correlation of FUM1 with FB(1) and FB(2), respectively, P < 0.0001): r=0.93 and r =0.78 (correlation of FUM19 with FB(1) and FB(2). respectively, P < 0.0001). Molecular methods used in this study were found to be useful for the rapid identification of Fusarium species. The high and significant correlation between FUM1 and FUM19 expression and fumonisins production suggests that real time RT-PCR is suitable for studies considering the influence of abiotic and biotic factors on expression of these genes. This is the first report concerning the expression of fumonisin biosynthetic genes in Fusarium strains isolated from Brazilian agricultural commodity. (c) 2010 Elsevier B.V. All rights reserved.

Glucose-induced heat production, insulin secretion and lactate production in isolated Wistar rat pancreatic islets

Transplantation of pancreatic islets is efficient in improving the metabolic control and quality of life and in preventing severe hypoglycemia in patients with brittle type I diabetes mellitus. More accurate methods to assess islet viability would be extremely useful in designing target interventions for islet cytoprorection and in reducing the number of islets required to achieve insulin independence. Here we report on an application of calorimetry to evaluate the metabolic response of pancreatic islets to glucose stimulation. A significant increase in metabolic heat was produced by islet samples when consecutively subjected to 2.8 and 16.3 mmol L-1 glucose. Under these glucose concentrations, 1000 islets released average heat values of 9.16 +/- 0.71 mJ and 14.90 +/- 1.21 mJ over 50 min, respectively. Additionally, the glucose stimulation indexes were 1.67 +/- 0.30 for insulin. 1.72 +/- 0.13 for heat and 2.91 +/- 0.50 for lactate, raising the important possibility of substituting the secreted insulin index/ratio by the index/ratio of the heat released in the evaluation of Langerhans islets viability for transplantation. Altogether, Our results demonstrate the applicability of calorimetry to assess the quality of isolated pancreatic islets and to study vital islet functions. (c) 2008 Published by Elsevier B.V.

Strategies for the use of PIMEX and other video exposure monitoring methods. : Final report from sub-project “implementation strategies” within the HERIVIS project

Video exposure monitoring (VEM) is a group of methods used for occupational hygiene studies. The method is based on a combined use of video recordings with measurements taken with real-time monitoring instruments. A commonly used name for VEM is PIMEX. Since PIMEX initially was invented in the mid 1980’s have the method been implemented and developed in a number of countries. With the aim to give an updated picture of how VEM methods are used and to investigate needs for further development have a number of workshops been organised in Finland, UK, the Netherlands, Germany and Austria. Field studies have also been made with the aim to study to what extent the PIMEX method can improve workers motivation to actively take part in actions aimed at workplace improvements.The results from the workshops illustrates clearly that there is an impressive amount of experiences and ideas for the use of VEM within the network of the groups participating in the workshops. The sharing of these experiences between the groups, as well as dissemination of it to wider groups is, however, limited. The field studies made together with a number of welders indicate that their motivation to take part in workplace improvements is improved after the PIMEX intervention. The results are however not totally conclusive and further studies focusing on motivation are called for.It is recommended that strategies for VEM, for interventions in single workplaces, as well as for exposure categorisation and production of training material are further developed. It is also recommended to conduct a research project with the intention of evaluating the effects of the use of VEM as well as to disseminate knowledge about the potential of VEM to occupational hygiene experts and others who may benefit from its use.

The attractiveness of the work is affected when production of handcrafted log houses moves indoors

Viewed from a historical perspective, a shift has occurred within the forestry and wood sector towards indoor work. In Sweden, the production of handcrafted log houses has now also begun to move indoors. With a point of departure in development processes within the log house sector involving working indoors, education, work attractiveness, between 2001-2005, the aim of this study was to compare indoor work with outdoor work, based on log house builders' experience of working on handcrafted log houses. Methods used in the interactive development project involving apprentices, experienced log house builders and researchers, were participation with continuous documentation of experiences and opinions; questions; interviews; and measurement of the work environment. The Attractive Work Model has been used in order to analyse perceptions and values. The changes, 15 out of 22 areas, were perceived both negatively and positively. Therefore, it can not be said that working on traditional, handcrafted log houses becomes more attractive if it is moved indoors. The majority wanted to work both outdoors and indoors, while most of the others only wanted to work outdoors. The results indicate that there is scope for developing more attractive work indoors by utilising experiences from log house builders and closely related activities such as the forestry and wood sector. Changes made within one area of work attractiveness affect other areas. Further research is needed both with regard to comparisons between indoor and outdoor work and regarding the interaction between the areas that are identified in the Attractive Work Model.

A case study approach to classroom experiential learning of problem structuring methods

The proposed research aims at consolidating two years of practical experience in developing a classroom experiential learning pedagogic approach for the problem structuring methods (PSMs) of operational research. The results will be prepared as papers to be submitted, respectively, to the Brazilian ISSS-sponsored system theory conference in São Paulo, and to JORS. These two papers follow the submission (in 2004) of one related paper to JORS which is about to be resubmitted following certain revisions. This first paper draws from the PSM and experiential learning literatures in order to introduce a basic foundation upon which a pedagogic framework for experiential learning of PSMs may be built. It forms, in other words, an integral part of my research in this area. By September, the area of pedagogic approaches to PSM learning will have received its first official attention - at the UK OR Society conference. My research and paper production during July-December, therefore, coincide with an important time in this area, enabling me to form part of the small cohort of published researchers creating the foundations upon which future pedagogic research will build. On the institutional level, such pioneering work also raises the national and international profile of FGVEAESP, making it a reference for future researchers in this area.

Method of numerical correction of errors occasioned by delay of records during the monitoring of environmental variables of interest for animal production

As condições de ambiente térmico e aéreo, no interior de instalações para animais, alteram-se durante o dia, devido à influência do ambiente externo. Para que análises estatísticas e geoestatísticas sejam representativas, uma grande quantidade de pontos distribuídos espacialmente na área da instalação deve ser monitorada. Este trabalho propõe que a variação no tempo das variáveis ambientais de interesse para a produção animal, monitoradas no interior de instalações para animais, pode ser modelada com precisão a partir de registros discretos no tempo. O objetivo deste trabalho foi desenvolver um método numérico para corrigir as variações temporais dessas variáveis ambientais, transformando os dados para que tais observações independam do tempo gasto durante a aferição. O método proposto aproximou os valores registrados com retardos de tempo aos esperados no exato momento de interesse, caso os dados fossem medidos simultaneamente neste momento em todos os pontos distribuídos espacialmente. O modelo de correção numérica para variáveis ambientais foi validado para o parâmetro ambiental temperatura do ar, sendo que os valores corrigidos pelo método não diferiram pelo teste Tukey, a 5% de probabilidade dos valores reais registrados por meio de dataloggers.

The amount of solar energy made available for the production of a sabia (Mimosa caesalpinaefolia Benth.) seed has a determinating effect on its becoming dormant

The amount of solar energy made available for the production of a sabid seed varied as a function of the time of the year, the face of the plant in which, the position in the plant on which and the position in the pod in which it was produced.Variation in solar energy availability as a consequence of the time of the year was a direct consequence of latitude. At 21degrees5'22 S the highest amounts of Global Solar Radiation (GSR) reaching the site where the experiment was conducted took place during the months from November through February. During these months there were no marked differences between any two of the amounts of GSR reaching faces North (N), South (S), West (W) East (E). From February through November (period during which the sabid plants of this study flowered and the resulting seeds matured and were harvested) the total GSR's were the lowest and marked differences were found between faces N and S, with face N receiving much more GSR than face S. During that period, faces W and E received practically the same amount of GSR and it was much less than that received by face N and much more than the one received by face S.The amount of biological energy made available for the development of a seed seemed also to vary according to a dry matter partitioning strategy by the plant -the central third of the plant seemed to be the one receiving the highest amounts of energy, followed either by the upper or the lower third of the plant- it was not very clear which third of the plant immediately followed the central one. The partitioning of biological energy at the pod level also seemed to follow a strategy by which the central seeds would be the ones to receive more, followed by the proximal seeds and these by the distal ones.This availability of energy seemed to have a direct effect on seed size, weight and on the percentage of seeds which showed a degree of dormancy deep enough to prevent their germinating under the conditions of a standard germination test.The implications of these results for the improvement of methods for the overcoming of dormancy of sabia seeds are discussed.

Occurrence of consonant production errors in liquid phonemes in children with operated cleft lip and palate

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Increased production of hydrogen peroxide by peripheral blood monocytes associated with smoking exposure intensity in smokers

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influence of Maternal Hyperglycemia on IL-10 and TNF-alpha Production: The Relationship with Perinatal Outcomes

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Beak trimming methods and their effect on the performance and egg quality of Japanese quails (Coturnix japonica) during lay

A total number of 720 Japanese quail females, reared under identical management conditions, and receiving feed and water ad libitum, was used. Quails were housed and reared from 1-35 days of age in litter pens in a rearing house, and then were transferred to a quail layer house. This study aimed at verifying if different beak trimming method could optimize egg production and quality by reducing stress and cannibalism among birds. A completely randomized experimental design was used, with six treatments in a 2x3 factorial arrangement, with two beak trimming ages (14 and 21 days) and three beak trimming variants (non-trimmed, 1/3 of the beak trimmed, or 1/2 of the beak trimmed), 6 replicates of 20 birds each. Performance was evaluated by feed intake, percentage of lay, egg mass, feed conversion ratio per dozen and per kg eggs, and mortality. Performance was influenced by trimming variant, with the best results obtained by birds with intact and those with 1/3 of the beak trimmed. Better specific gravity was in quails submitted to beak trimming at 21 days of age, whereas other egg quality parameters did not present significant results. Based the results obtained in the present study, it is recommended to submit to beak trimming either at 14 or 21 days of age.

Beak-trimming methods and their effect on the performance of japanese quail pullets (Coturnix japonica)

This study aimed at verifying if beak-trimming methods in Japanese quail pullets could optimize production by decreasing stress caused by cannibalism. A total number of 816 day-old Japanese quails was distributed in a completely randomized experimental design in a 2 x 3 factorial arrangement, with two beak-trimming ages (14 and 21 days of age) and three beak-trimming sizes (not trimmed, 1/3 trimmed, or 1/2 trimmed), and 4 replicates of 34 birds per replicate. Birds were submitted to the same management and feeding conditions. Weight gain, feed intake, feed conversion ratio, and mortality were evaluated. There was no significant effect of age at beak trimming on the evaluated parameters (P>0.05), as well as no significant interaction between age at beak trimming, and beak-trimming method. There was a significant effect (P<0.01) of trimming size on performance, with the best performance observed in birds not submitted to beak trimming or had 1/2 of the beak trimmed. When the beak was more aggressively trimmed (1/2), parameters were worse. According to the obtained results, it is recommended to trim 1/3 of the beaks, which can be performed either at 14 or 21 days of age.

Forced-Molting methods and their effects on the performance and egg quality of japanese quails (Coturnix japonica) in the second laying cycle

The experiment was carried out in the experimental poultry house of the Research and Development Unit of Brotas of Agência Paulista de Tecnologia dos Agronegócios do Centro-Oeste, SP, Brazil. The objective of the study was to evaluate the performance of Japanese quails submitted to forced molting aiming at optimizing the use of the same quail flock by promoting a second laying cycle. A total number of 400 67-day-old Japanese quails in lay, previously submitted to 14 days of forced molting, was distributed in a completely randomized experimental design into five treatments (T1= not submitted to forced molting, T2= 03 days of fasting + fed ad libitum, T3= 01 days of fasting + 13 days of feed restriction, T4= 02 days of fasting + 12 days of feed restriction, and T5= 03 days of fasting + 11 days of feed restriction. Feeds were contained equal nutrient levels, and were formulated according to NRC (1994) recommendations. There were significant differences among the studied treatments. Although the treatment of 3 days of fasting followed by ad libitum feeding resulted in lower egg weight, it promoted better lay percentage, egg mass, and feed conversion ratios (FCR/dz and FCR/kg). on the other hand, 3 days of fasting followed by restricted feeding resulted in higher feed intake and worse feed conversion ratios (FCR/dz and FCR/kg). When birds were not submitted to forced molting, they presented lower lay percentage and egg mass.

Impact of proximal cytoplasmic droplets on quality traits and in-vitro embryo production efficiency of cryopreserved bull spermatozoa

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Lipopolysaccharide-induced Stem Cell Factor Messenger RNA Expression and Production in Odontoblast-like Cells

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)