Status of the shrimp sector in Bangladesh in the context of HACCP and trade issues: a review

Shrimp culture in Bangladesh has emerged as an important aquaculture industry over the last three decades although its culture in greater parts of the farming area is done in traditional ways. In the meantime, the government of Bangladesh has taken necessary measures along with the private sectors to increase production, upgrade processing industries and to promote export performance. Long supply chain in raw material collection, inadequate infrastructure facilities, poor level of cool chain and lack of adequate HACCP-based training on hygiene and sanitation of different groups of people involved in the field level are the main problems of quality loss of raw materials. Shortage of raw materials results in poor capacity utilization of the processing plants. The growth of bagda (P. monodon) hatchery has expanded rapidly over the last few years, remaining mostly concentrated in Cox's Bazar region is enough to meet the target production. However, there is a shortage of pelleted shrimp feed in Bangladesh. A large number of export processors are now producing increasing amounts of value-added products such as individually quick-frozen, peeled and divined, butterfly cut shrimp, as well as cooked products. The export earnings from value added products is about half of the total export value. About 95% of total fish products are exported to European countries, USA and Japan and the remaining to the Southeast Asia and the Middle East. Most of the EU approved shrimp processing industries have been upgraded with laboratory facilities and provided HACCP training to their workers. As of now, HACCP is applied on the processing plants, but to ensure the quality of raw materials and to reduce risks, shrimp farms are also required to adopt HACCP plan. There is increased pressure time to time from importing countries for fish processors to establish effective quality assurance system in processing plants. Fish Inspection and Quality Control (FIQC) of the Department of Fisheries while having moderately equipped laboratories with chemical, bio-chemical and microbiological testing facilities and qualified technical personnel, the creation of facilities for testing of antibiotics is underway. FIQC mainly supervises quality aspects of the processing plants and has little or no control over raw material supply chains from farm to processing plants. Bangladesh export consignments sometimes face rejection due to reported poor quality of the products. Three types of barriers are reported for export of shrimp to EU countries. These are:(1) government participation in trade and restrictive practices (state aid, countervailing duties, state trading enterprises, government monopoly practices), customs and administrative entry procedures (anti-dumping duties, customs valuation, classification, formalities, rules of origin); (2) technical barriers to trade or TBT (technical regulations, standards, testing, certification arrangement); (3) specific limitations (quantitative restrictions, import licensing, embargoes, exchange control, discriminatory sourcing, export restraints, measures to regulate domestic prices, requirements concerning marking, labeling and packaging).

Generation, flow and utilisation of information on the regional fish trade

The purpose of the study was to provide an in-depth understanding of information generation, flow and utilization within Uganda’s regional fish trade. The study was carried out at district headquarters, border points, landing sites and border markets, involving DFOs, Customs Officials, BMU executives and market managers.

Perspectives of impacts of international fish trade in Kenya

There has been tremendous growth in international trade on fish and fisheries products in the last four decades. In 1970 the value of internationally traded fish was estimated at 3 billion; this increased to US$ 15 billion in 1980, US$ 36 billion in 1990 and US$ 55 billion in 2000 (Ahmed, 2003). Recent statistics show that fish trade has surpassed other agricultural commodities that have traditionally been traded internationally such as coffee, tea, cocoa, sugar, cereals, meat, oils and milk. In 2000, fish contributed 22% of the value of all agricultural exports, making it the highest internationally traded food product (Ahmed, 2003). In another perspective, nearly 40% of the world's fish is now sold in the international market. The flow of fish in the international market is highly lopsided. About 50% of fish exportscomefromthedevelopingworld ,ofwhich 20%arefrom low-incomefood deficient countries. Most of this fish, however, is consumed by the developed countries, which account for nearly 80% of all imported fish. The EU, USA and Japan are the major importers, accounting for over 77% of global fish imports. Thus, while developing countries playa big role in fish production , they consume very little of it, instead preferring to sell for the hard currency. In some fish exporting countries, especially those in Asia, there is some link between fish exports and imports of substitute and complementary foods. Much of the increased earning from fish exports in those countries is explained by a corresponding rise in expenditure on imported foods. This is not the case in many of the fish exporter nations in Africa. In their case, fish exports generate foreign exchange that they use to meet other socio-political objectives; hardly is it aimed at solving the wider food needs. Therefore, one of the most immediate concerns of international fish trade is its impact on food security in the poor exporter nations.

How PEDOT:PSS solutions produce satellite-free inkjets

Satellite droplets are unwanted in inkjet printing and various approaches have been suggested for their reduction. Low jetting speeds limit applications of the process. Added surfactants for wetting and conductivity enhancement may help but dynamic surface tension effects may counteract improvements. A higher fluid viscosity delays ligament break-up, but also leads to slower jets, while viscoelasticity reduces satellite formation only in certain cases. We show here that aqueous solutions of PEDOT:PSS (1:2.5 by weight) are strongly shear-thinning. They exhibit low viscosity within the printing nozzle over a wide range of jet speeds, yet rapidly (<100 μs) recover a higher viscosity at the low shear rates applicable once the jet has formed, which give the benefit of delayed satellite formation. The delay over a 0.8 mm stand-off distance can be sufficient to completely suppress satellites, which is significant for many printing applications. © 2012 Elsevier B.V. All rights reserved.

A novel method to produce small droplets from large nozzles.

This work presents a new method to generate droplets with diameters significantly smaller than the nozzle from which they emerge. The electrical waveform used to produce the jetting consists of a single square negative pulse. The negative edge of the pressure wave pulls the meniscus in, overturning the surface in such a way that a cavity is created. This cavity is then forced to collapse under the action of the positive edge of the pressure wave. This violent collapse produces a thin jet that eventually breaks up and produces droplets. Four droplet generator prototypes that demonstrate the capabilities of this novel mechanism are described. It is also shown that the proposed mechanism extends the existing limits of the commonly accepted inkjet operating regime.

Product life trade-offs: what if products fail early?

Increasing product life allows the embodied emissions in products to be spread across a longer period but can mean that opportunities to improve use-phase efficiency are foregone. In this paper, a model that evaluates this trade-off is presented and used to estimate the optimal product life for a range of metal-intensive products. Two strategies that have potential to save emissions are explored: (1) adding extra embodied emissions to make products more sturdy, increasing product life, and (2) increasing frequency of use, causing early product failure to take advantage of improvements in use-phase efficiency. These strategies are evaluated for two specific case studies (long-life washing machines and more frequent use of vehicles through car clubs) and for a range of embodied and use-phase intensive products under different use-phase improvement rate assumptions. Particular emphasis is placed on the fact that products often fail neither at their design life nor at their optimal life. Policy recommendations are then made regarding the targeting of these strategies according to product characteristics and the timing of typical product failure relative to optimal product life.

The energy required to produce materials: constraints on energy-intensity improvements, parameters of demand.

In this paper, we review the energy requirements to make materials on a global scale by focusing on the five construction materials that dominate energy used in material production: steel, cement, paper, plastics and aluminium. We then estimate the possibility of reducing absolute material production energy by half, while doubling production from the present to 2050. The goal therefore is a 75 per cent reduction in energy intensity. Four technology-based strategies are investigated, regardless of cost: (i) widespread application of best available technology (BAT), (ii) BAT to cutting-edge technologies, (iii) aggressive recycling and finally, and (iv) significant improvements in recycling technologies. Taken together, these aggressive strategies could produce impressive gains, of the order of a 50-56 per cent reduction in energy intensity, but this is still short of our goal of a 75 per cent reduction. Ultimately, we face fundamental thermodynamic as well as practical constraints on our ability to improve the energy intensity of material production. A strategy to reduce demand by providing material services with less material (called 'material efficiency') is outlined as an approach to solving this dilemma.

Design trade-offs for energy regeneration and control in vehicle suspensions

This paper investigates the fundamental trade-offs involved in designing energy-regenerative suspensions, in particular, focusing on efficiency of power extraction and its effect on vehicle dynamics and control. It is shown that typical regenerative devices making use of linear-to-rotational elements can be modelled as a parallel arrangement of an inerter and a dissipative admittance. Taking account of typical adjustable parameters of the generator, it is shown, for a given suspension damping coefficient, that the power efficiency ratio scales with inertance. For a typical passenger vehicle, it is shown that there is a feasible compromise, namely that good efficiency is achievable with an inertance value that is not detrimental to vehicle performance. A prototype is designed and tested with a resistive termination and experimental results show good agreement between ideal and experimental admittances. The possibility to use dynamic (rather than purely resistive) loads to improve vehicle control without limiting the energy recovery is discussed. © 2013 Copyright Taylor and Francis Group, LLC.

Reduced swimming abilities in fast-growing transgenic common carp Cyprinus carpio associated with their morphological variations

Critical swimming speeds (U-crit) and morphological characters were compared between the F-4 generation of GH-transgenic common carp Cyprinus carpio and the non-transgenic controls. Transgenic fish displayed a mean absolute U-crit value 22.3% lower than the controls. Principal component analysis identified variations in body shape, with transgenic fish having significantly deeper head, longer caudal length of the dorsal region, longer standard length (L-S) and shallower body and caudal region, and shorter caudal length of the ventral region. Swimming speeds were related to the combination of deeper body and caudal region, longer caudal length of the ventral region, shallower head depth, shorter caudal length of dorsal region and L-S. These findings suggest that morphological variations which are poorly suited to produce maximum thrust and minimum drag in GH-transgenic C. carpio may be responsible for their lower swimming abilities in comparison with non-transgenic controls.

Status of sturgeon aquaculture and sturgeon trade in China: a review based on two recent nationwide surveys

The authors reviewed the aquacultural history of Acipenseriformes in China, related the legal status and examined the current status of the cultured species or hybrids, origins of seedlings, quantities of production, geographic distribution in farming, and the sustainability for both restocking programmes and human consumption. The census shows that since 2000, the production of cultured sturgeons in China appears to have become the largest in the world. As of 2000, the rapid growth of sturgeon farming in China mainly for commercial purposes has shifted harvests in the Amur River from caviar production to the artificial culture of sturgeon seedlings. This dramatic development has also caused a series of extant and potential problems, including insufficient market availability and the impact of exotic sturgeons on indigenous sturgeon species. Annual preservation of sufficient higher-age sturgeons should be a national priority in order to establish a sustainable sturgeon-culture industry and to preserve a gene pool of critically endangered sturgeon species to prevent their extinction.