Protection by methylproamine of irradiated human keratinocytes correlates with reduction of DNA damage

Purpose: The therapeutic ratio for ionising radiation treatment of tumour is a trade-off between normal tissue side-effects and tumour control. Application of a radioprotector to normal tissue can reduce side-effects. Here we study the effects of a new radioprotector on the cellular response to radiation. Methylproamine is a DNA-binding radioprotector which, on the basis of published pulse radiolysis studies, acts by repair of transient radiation-induced oxidative species on DNA. To substantiate this hypothesis, we studied protection by methylproamine at both clonogenic survival and radiation-induced DNA damage, assessed by γH2AX (histone 2AX phosphorylation at serine 139) focus formation endpoints. Materials and methods: The human keratinocyte cell line FEP1811 was used to study clonogenic survival and yield of γH2AX foci following irradiation (137Cs γ-rays) of cells exposed to various concentrations of methylproamine. Uptake of methylproamine into cell nuclei was measured in parallel. Results: The extent of radioprotection at the clonogenic survival endpoint increased with methylproamine concentration up to a maximum dose modification factor (DMF) of 2.0 at 10 μM. At least 0.1 fmole/nucleus of methylproamine is required to achieve a substantial level of radioprotection (DMF of 1.3) with maximum protection (DMF of 2.0) achieved at 0.23 fmole/nucleus. The γH2AX focus yield per cell nucleus 45 min after irradiation decreased with drug concentration with a DMF of 2.5 at 10 μM. Conclusions: These results are consistent with the hypothesis that radioprotection by methylproamine is mediated by attenuation of the extent of initial DNA damage.

Poverty by acronym in Australia : welcome to CIM, VIM, PBIM, CPIM and SEAM

This paper discusses Compulsory Income Management (CIM) in Australia and the implications of technology backed forms of surveillance and increasingly conditional benefit payments. The CIM project raises important questions about requiring people to take greater responsibility for their personal behaviour when they no longer have control over key financial aspects of their lives. Some Indigenous communities have resisted the BasicsCard, because CIM was imposed with little prior consultation or subsequent independent evaluation. The compulsory income management of individuals by a paternalist welfare state contradicts and undermines the purported policy aims that they become less welfare dependent and more positively engaged with the world of paid employment and does little to address the growing condition of poverty in Australia.

Teacher education for high-poverty schools : keeping the bar high

For some time now, there has been a focus, both in Australia and internationally, on quality teaching as a fundamental component that affects the educational outcomes of all students. The question of how teacher education programs in Australia prepare effective teachers to work across all school settings-including low-SES schools-has been elevated to national prominence by data from the 20 12 Programme for International Student Assessment (PIS A), which revealed a fall in Australian students' world ranking across Mathematics, Reading and Science. Education is commonly acknowledged as a "foundation capability" that improves a person's life chances, including employment prospects, and it is widely understood to be a "route out of disadvantage" (McLachlan, Gilfillan, and Gordon 20 13). The Australian Bureau of Statistics 201 1- 12 data suggest that around 2.6 million (11.8%) Australians currently live under the poverty line (Phillips et a!. 2012, 8). According to the Organisation for Economic Cooperation and Development (OECD), despite the significant effects teachers have on student performance, disadvantaged schools are not always staffed with the highest quality teachers (see Darling-Hammond, 2006).

Teacher education for high poverty schools : the National Exceptional Teachers for Disadvantaged Schools program

A vital element to improve outcomes for disadvantaged students is outstanding teachers. A reality, however, is that teacher graduates in the top quartile of academic scores are far less likely to accept positions in tough urban, regional, rural and remote schools. Further, because high poverty schools can be challenging environments, these teachers are retained for much shorter periods of time. In response to this challenge, the National Exceptional Teachers for Disadvantaged Schools program (NETDS) creates a pathway for the highest quality pre-service teachers to be fully prepared, professionally and personally, for roles within high poverty schools. The program identifies the highest-achieving mainstream preservice teachers in university programs across the country and offers them a specialised curriculum and supported practicum experience in a network of disadvantaged partner schools. By working closely with government, philanthropy and partner schools, the program also works to channel these exceptional pre-service teachers into employment in schools where they will have the greatest impact. Its initial results have been exceptional: over 90% of graduates are now employed as teachers in high poverty schools. This paper will discuss their research on how they are working to build the infrastructure and capacity for research on innovations that prepare teachers for 21st century schools in the Australian context.

In-plane graphene/boron-nitride heterostructure as efficient metal-free electrocatalyst for the oxygen reduction reaction

Exploiting metal-free catalysts for the oxygen reduction reaction (ORR) and understanding their catalytic mechanisms are vital for the development of fuel cells (FCs). Our study has demonstrated that in-plane heterostructures of graphene and boron nitride (G/BN) can serve as an efficient metal-free catalyst for the ORR, in which the C-N interfaces of G/BN heterostructures act as reactive sites. The formation of water at the heterointerface is both energetically and kinetically favorable via a fourelectron pathway. Moreover, the water formed can be easily released from the heterointerface, and the catalytically active sites can be regenerated for the next reaction. Since G/BN heterostructures with controlled domain sizes have been successfully synthesized in recent reports (e.g. Nat. Nanotechnol., 2013, 8, 119), our results highlight the great potential of such heterostructures as a promising metal-free catalyst for ORR in FCs.

Bat colony size reduction coincides with clear-fell harvest operations and high rates of roost loss in plantation forest

Clear-fell harvest of forest concerns many wildlife biologists because of loss of vital resources such as roosts or nests, and effects on population viability. However, actual impact has not been quantified. Using New Zealand long-tailed bats (Chalinolobus tuberculatus) as a model species we investigated impacts of clear-fell logging on bats in plantation forest. C. tuberculatus roost within the oldest stands in plantation forest so it was likely roost availability would decrease as harvest operations occurred. We predicted that post-harvest: (1) roosting range sizes would be smaller, (2) fewer roosts would be used, and (3) colony size would be smaller. We captured and radiotracked C. tuberculatus to day-roosts in Kinleith Forest, an exotic plantation forest, over three southern hemisphere summers (Season 1 October 2006–March 2007; Season 2 November 2007–March 2008; and Season 3 November 2008–March 2009). Individual roosting ranges (100% MCPs) post harvest were smaller than those in areas that had not been harvested, and declined in area during the 3 years. Following harvest, bats used fewer roosts than those in areas that had not been harvested. Over 3 years 20.7% of known roosts were lost: 14.5% due to forestry operations and 6.2% due to natural tree fall. Median colony size was 4.0 bats (IQR = 2.0–8.0) and declined during the study, probably because of locally high levels of roost loss. Post harvest colonies were smaller than colonies in areas that had not been harvested. Together, these results suggest the impact of clear-fell harvest on long-tailed bat populations is negative.

The Sawa World model : addressing extreme poverty through local solutions and youth empowerment

With an estimated 1.2 billion people worldwide living in extreme poverty, it is critical to find effective long-term solutions. Sawa World is a non-profit organization founded by Daphne Nederhorst in 2005 to empower marginalized youth to document simple, locally created solutions that address this pressing issue. Currently working primarily in Uganda, Sawa World has created a unique model that celebrates powerful solutions generated from within the community to help people living in poverty help themselves. Using inspiring local leaders who themselves come from extreme poverty, Sawa World aims to end extreme poverty from the ground up.

Jet and flash imprint defectivity - Assessment and reduction for semiconductor applications

Defectivity has been historically identified as a leading technical roadblock to the implementation of nanoimprint lithography for semiconductor high volume manufacturing. The lack of confidence in nanoimprint's ability to meet defect requirements originates in part from the industry's past experiences with 1 × lithography and the shortage in enduser generated defect data. SEMATECH has therefore initiated a defect assessment aimed at addressing these concerns. The goal is to determine whether nanoimprint, specifically Jet and Flash Imprint Lithography from Molecular Imprints, is capable of meeting semiconductor industry defect requirements. At this time, several cycles of learning have been completed in SEMATECH's defect assessment, with promising results. J-FIL process random defectivity of < 0.1 def/cm2 has been demonstrated using a 120nm half-pitch template, providing proof of concept that a low defect nanoimprint process is possible. Template defectivity has also improved significantly as shown by a pre-production grade template at 80nm pitch. Cycles of learning continue on feature sizes down to 22nm. © 2011 SPIE.

A reduction of diffusion in PVA Fricke hydrogels

A modification to the PVA-FX hydrogel whereby the chelating agent, xylenol orange, was partially bonded to the gelling agent, poly-vinyl alcohol, resulted in an 8% reduction in the post irradiation Fe3+ diffusion, adding approximately 1 hour to the useful timespan between irradiation and readout. This xylenol orange functionalised poly-vinyl alcohol hydrogel had an OD dose sensitivity of 0.014 Gy−1 and a diffusion rate of 0.133 mm2 h−1. As this partial bond yields only incremental improvement, it is proposed that more efficient methods of bonding xylenol orange to poly-vinyl alcohol be investigated to further reduce the diffusion in Fricke gels.

A framework for sustainable energy reduction in modern breweries

This thesis examines the existing frameworks for energy management in the brewing industry and details the design, development and implementation of a new framework at a modern brewery. The aim of the research was to develop an energy management framework to identify opportunities in a systematic manner using Systems Engineering concepts and principles. This work led to a Sustainable Energy Management Framework, SEMF. Using the SEMF approach, one of Australia's largest breweries has achieved number 1 ranking in the world for water use for the production of beer and has also improved KPI's and sustained the energy management improvements that have been implemented during the past 15 years. The framework can be adapted to other manufacturing industries in the Australian context and is considered to be a new concept and a potentially important tool for energy management.

Poverty and non-communicable diseases in South Africa

Background: High levels of wealth inequality with improved health statistics in South Africa (SA) provide an important opportunity to investigate non-communicable diseases (NCDs) among the poor. Aims: This paper uses two distinct national data sets to contrast patterns of mortality in rich and poor areas and explore the associations between poverty, risk factors, health care and selected NCDs diseases in South African adults. Methods: Causes of premature mortality in 1996 experienced in the poorest magisterial districts are compared with those in the richest, using average household wealth to classify districts. Logistic and multinomial regression are used to investigate the association of a household asset index and selected chronic conditions, related risk factors and healthcare indicators using data from the 1998 South African Demographic and Health Survey. Results: NCDs accounted for 39% and 33% of premature mortality in rich and poor districts respectively. The household survey data showed that the risk factors hypertension and obesity increased with increasing wealth, while most of the lifestyle factors, such as light smoking, domestic exposure to ``smoky'' fuels and alcohol dependence were associated with poverty. Treatment status for hypertension and asthma was worse for poor people than for rich people. Conclusions: The study suggests that NCDs and lifestyle-related risk factors are prevalent among the poor in SA and treatment for chronic diseases is lacking for poor people. The observed increase in hypertension and obesity with wealth suggests that unless comprehensive health promotion strategies are implemented, there will be an unmanageable chronic disease epidemic with future socioeconomic development in SA.

Afterschool MediaClub: Critical literacy in a high diversity, high poverty urban setting

In this chapter we present analyses of data produced with young people in an afterschool digital literacy program for 9 – 12 year olds. The young people were students at a high diversity, high poverty outer suburban elementary school in Queensland, Australia. The club was part of the URLearning research project (2010-14). In the classroom-based component of the project we worked with teachers to develop intellectually substantive and critical digital literacy practice. MediaClub was in some ways complementary to the classroom component; it was designed to skill up interested kids as digital media experts not only for their families and communities, but also for the classroom. Given the critical literacy traditions established in Australian schools, we approached MediaClub with certain critical expectations. In this chapter we look at what ensued, highlighting unanticipated critical outcomes at a time of heightened struggle over English curriculum. Critical literacy has been part of official English curriculum in Queensland since the early 1990s. The approach has been primarily text analytic, concerned with giving students access to genres of power and tools for understanding the ideological work of language through text. Many ideas for translating this normative critical project into classroom practice have been developed for use from the earliest elementary grades onwards. However, curricular space for critical literacy is under pressure. Amongst other things, this reflects both the development of Australia’s first national curriculum and the construction of a regimen of national literacy testing. At MediaClub we found a certain resistance to learning activities which were “too much like school”. However, in a context of increased control of teachers’ and students’ work in the classroom, MediaClub evolved as a learning space that can be understood in critical terms. Our experience in this regard might be of interest to teachers and researchers in high diversity high poverty settings that are strongly controlled through increasingly prescriptive – even scripted – pedagogies.

Reduction of diesel engine exhaust emissions using non-thermal plasma technology

Non-thermal plasma (NTP) is a promising candidate for controlling engine exhaust emissions. Plasma is known as the fourth state of matter, where both electrons and positive ions co-exist. Both gaseous and particle emissions of diesel exhaust undergo chemical changes when they are exposed to plasma. In this project diesel particulate matter (DPM) mitigation from the actual diesel exhaust by using NTP technology has been studied. The effect of plasma, not only on PM mass but also on PM size distribution, physico-chemical structure of PM and PM removal mechanisms, has been investigated. It was found that NTP technology can significantly reduce both PM mass and number. However, under some circumstances particles can be formed by nucleation. Energy required to create the plasma with the current technology is higher than the benchmark set by the commonly used by the automotive industry. Further research will enable the mechanism of particle creation and energy consumption to be optimised.

A multidimensional collaborative filtering fusion approach with dimensionality reduction

Multidimensional data are getting increasing attention from researchers for creating better recommender systems in recent years. Additional metadata provides algorithms with more details for better understanding the interaction between users and items. While neighbourhood-based Collaborative Filtering (CF) approaches and latent factor models tackle this task in various ways effectively, they only utilize different partial structures of data. In this paper, we seek to delve into different types of relations in data and to understand the interaction between users and items more holistically. We propose a generic multidimensional CF fusion approach for top-N item recommendations. The proposed approach is capable of incorporating not only localized relations of user-user and item-item but also latent interaction between all dimensions of the data. Experimental results show significant improvements by the proposed approach in terms of recommendation accuracy.

Tensor reduction for user profiling in personalized recommender systems

User profiling is the process of constructing user models which represent personal characteristics and preferences of customers. User profiles play a central role in many recommender systems. Recommender systems recommend items to users based on user profiles, in which the items can be any objects which the users are interested in, such as documents, web pages, books, movies, etc. In recent years, multidimensional data are getting more and more attention for creating better recommender systems from both academia and industry. Additional metadata provides algorithms with more details for better understanding the interactions between users and items. However, most of the existing user/item profiling techniques for multidimensional data analyze data through splitting the multidimensional relations, which causes information loss of the multidimensionality. In this paper, we propose a user profiling approach using a tensor reduction algorithm, which we will show is based on a Tucker2 model. The proposed profiling approach incorporates latent interactions between all dimensions into user profiles, which significantly benefits the quality of neighborhood formation. We further propose to integrate the profiling approach into neighborhoodbased collaborative filtering recommender algorithms. Experimental results show significant improvements in terms of recommendation accuracy.