Estudo da influência de argilas organofílicas no processo de biodegradação do PLA

In this study nanocomposites of PLA and organoclays Cloisite 20A and Cloisite 30B were prepared by melt intercalation. The influence from the organoclays on the biodegradation of PLA was evaluated based on the respirometry method. The incorporation of clay Cloisite 20A did not change the mineralization curve of PLA. The nanocomposite with Cloisite 30B, on the other hand, presented a different behavior, indicating a delay in the polymer biodegradation. The materials were characterized by X-ray Diffraction, Thermogravimetric Analysis and Differential Scanning Calorimetry. The materials characterization indicated nanocomposites with an intercalated structure as well as reduced thermal stability and a slight increase in the degree of crystallinity compared to the pure polymer.

Planejamento de experimentos em blocos aplicado às propriedades mecânicas de arames de aço para molas

The purpose of this article is to demonstrate an application of the design of block experiments via analysis and multiple linear regression in the investigation of a steel thermal treatment process with multiple responses. The study aimed to design statistical models to predict the mechanical properties in SAE 9254 draw steel wires, with diameters of 2.00 mm and 6.50 mm, after quench hardening and tempering. For this purpose, process input variables (wire diameter, processing speed, tempering temperature and polymer concentration) were investigated regarding their influence on the material tensile strength, yield point and hardness. The results revealed that the mechanical properties of the steel wire are significantly influenced by the selected variables, and analysis of variance (ANOVA) was employed to validate the design of the statistical models. Multiple linear regression allowed for an appropriate representation of the process, and graphical analysis was found to be very useful in displaying the behavior of the multiple responses.

Diagnose da composição nutricional e eficiência de fertilizantes nitrogenados na cultura do milho

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Imobilização de lipases por adsorção e ligação covalente em derivados de agarose e quitosana e sua aplicação em biocatálise

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Desenvolvimento e caracterização de sistemas líquido-cristalinos para aplicação tópica de metotrexato: estudos de liberação, retenção e permeação in vitro

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Sistemas anfifílicos derivados de megiumina: uma nova abaordagtem no desenvolvimento de biomateriais supramoleculares

Pós-graduação em Química - IQ

Derivados de poli(L-lisina) com fosforilcolina para transferência gênica não-viral

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Bacterial cellulose as a template for preparation of hydrotalcite-like compounds

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Estudo eletroquímico de revestimentos ambientalmente amigáveis aplicados para proteção da liga de alumínio 1200

Pós-graduação em Química - IQ

Síntese e caracterização de micropartículas de etilcelulose e seu uso na encapsulação do fungicida tebuconazole

Pós-graduação em Química - IQ

Matrizes híbridas siloxano-poliéter incorporadas com argila montmorilonita para liberação controlada de fármaco

Pós-graduação em Química - IQ

Modelagem e otimização por metodologia de superfícies de resposta: um estudo em arames de aço SAE 9254 para molas automobilísticas

Pós-graduação em Engenharia Mecânica - FEG

Estudo das características térmicas e mecânicas de formulações de adesivos PSA HOT MELT contendo variações de borrachas SBC e resinas taquificantes

The properties of the hot melt adhesive pressure sensitive (HMPSA) using an elastomer as a base polymer a copolymer of styrene and butadiene (SBS) and variation of tackifiers resins such as hydrocarbon resins and hydrogenated hydrocarbon were investigated. The formulations were prepared by mixing process within shear. The adhesives prepared were evaluated in test Brookfield viscosity and softening point Ring and Ball to compare the formulations and the influence of variations in raw materials. Infrared analyzes were performed to detect the reactions between the inputs and investigate the chemical interactions of the same properties of the adhesive. In thermal analysis, the assay was performed thermogravimetry (TG) and diferencial exploratory calorimetry (DSC). Were investigated the parameters of the tensile test on each of the formulations. Finally, were analysed comparatively the basic formulations of adhesives with their respective raw materials

Desenvolvimento de nanopartículas de quitosana para adminstração nasal de zidovudina

Zidovudine (AZT) is the drug most commonly used in AIDS treatment, isolated or in combination with other antiretroviral agents, but it has certain limitations due to its therapeutic dose-dependent haematological toxicity. In addition, it has low oral bioavailability, since it undergoes pre-systemic metabolism. The nasal route has been used as an alternative route for drug administration, because it can promote its direct absorption to blood circulation, avoiding hepatic metabolism. However, this route presents as a factor limiting the mucociliary clearance mechanisms that remove quickly the formulation of the nasal cavity. To prolong the residence time of formulations, in this direction, has been proposed the development of mucoadhesive systems. Among the various existing systems, the use of chitosan (QS), as mucoadhesive polymer, has been widely exploited in the preparation of nanoparticles (NPs). The objective of this study was to develop and characterize QS’s NPs for intranasal administration of AZT. For both NPs have been developed by ionic crosslinking of QS with sodium tripolyphosphate (TPP). These NPs were characterized by studies of particle size distribution, zeta potential, morphology, mucoadhesion tests, assessing the ability of encapsulation of the drug and permeation profile of AZT. The evaluation of AZT in the NPs was determined by UV-Vis spectroscopy. Mucoadhesion measures were made using a texture analyzer, using a mucin disk and porcine mucous membrane , and permeation assay were conducted using porcine nasal mucous membrane adapted to the Franz cell. These results suggest that the systems in hand have great potential for nasal AZT administration

Biodegradação de filmes de polipropileno (PP), poli (hidroxibutirato-co-valerato) (PHBV) e blenda pré-irradiados com luz UV

This work intends to investigate the biodegradation of the polymers and blend films of polypropylene (PP) and poly(hidroxybutirate-valerate) (PHBV), after UV radiation to facilitate the PP degradation, which is a polymer with long chains difficult to degrade by biological agents present in the environment. This polymer is outstanding by its mechanical properties and versatility of industrial and commercial use and the PHBV by its quick biodegradability in the environment. Blends of these materials could to present a commitment between mechanical properties and biodegradability to execute its function and after the discard to have lesser lifetime in the garbage landfills. Another aspect of this work is the controlling effect of PP on PHBV, influencing its degradation time