Intelligence-led crime scene processing. Part I : Forensic intelligence.

Forensic science is generally defined as the application of science to address questions related to the law. Too often, this view restricts the contribution of science to one single process which eventually aims at bringing individuals to court while minimising risk of miscarriage of justice. In order to go beyond this paradigm, we propose to refocus the attention towards traces themselves, as remnants of a criminal activity, and their information content. We postulate that traces contribute effectively to a wide variety of other informational processes that support decision making inmany situations. In particular, they inform actors of new policing strategies who place the treatment of information and intelligence at the centre of their systems. This contribution of forensic science to these security oriented models is still not well identified and captured. In order to create the best condition for the development of forensic intelligence, we suggest a framework that connects forensic science to intelligence-led policing (part I). Crime scene attendance and processing can be envisaged within this view. This approach gives indications abouthowto structure knowledge used by crime scene examiners in their effective practice (part II).

Strengthening of Existing Single Span Steel Beam and Concrete Deck Bridges, HR-238, Part 1, 1983

The Phase I research, Iowa Department of Transportation (IDOT) Project HR-214, "Feasibility Study of Strengthening Existing Single Span Steel Beam Concrete Deck Bridges," verified that post-tensioning can be used to provide strengthening of the composite bridges under investigation. Phase II research, reported here, involved the strengthening of two full-scale prototype bridges - one a prototype of the model bridge tested during Phase I and the other larger and skewed. In addition to the field work, Phase II also involved a considerable amount of laboratory work. A literature search revealed that only minimal data existed on the angle-plus-bar shear connectors. Thus, several specimens utilizing angle-plus-bar, as well as channels, studs and high strength bolts as shear connectors were fabricated and tested. To obtain additional shear connector information, the bridge model of Phase I was sawed into four composite concrete slab and steel beam specimens. Two of the resulting specimens were tested with the original shear connection, while the other two specimens had additional shear connectors added before testing. Although orthotropic plate theory was shown in Phase I to predict vertical load distribution in bridge decks and to predict approximate distribution of post-tensioning for right-angle bridges, it was questioned whether the theory could also be used on skewed bridges. Thus, a small plexiglas model was constructed and used in vertical load distribution tests and post-tensioning force distribution tests for verification of the theory. Conclusions of this research are as follows: (1) The capacity of existing shear connectors must be checked as part of a bridge strengthening program. Determination of the concrete deck strength in advance of bridge strengthening is also recommended. (2) The ultimate capacity of angle-plus-bar shear connectors can be computed on the basis of a modified AASHTO channel connector formula and an angle-to-beam weld capacity check. (3) Existing shear connector capacity can be augmented by means of double-nut high strength bolt connectors. (4) Post-tensioning did not significantly affect truck load distribution for right angle or skewed bridges. (5) Approximate post-tensioning and truck load distribution for actual bridges can be predicted by orthotropic plate theory for vertical load; however, the agreement between actual distribution and theoretical distribution is not as close as that measured for the laboratory model in Phase I. (6) The right angle bridge exhibited considerable end restraint at what would be assumed to be simple support. The construction details at bridge abutments seem to be the reason for the restraint. (7) The skewed bridge exhibited more end restraint than the right angle bridge. Both skew effects and construction details at the abutments accounted for the restraint. (8) End restraint in the right angle and skewed bridges reduced tension strains in the steel bridge beams due to truck loading, but also reduced the compression strains caused by post-tensioning.

Strengthening of Existing Single Span Steel Beam and Concrete Deck Bridges, HR-238, Part II, 1985

The unifying objective of Phases I and II of this study was to determine the feasibility of the post-tensioning strengthening method and to implement the technique on two composite bridges in Iowa. Following completion of these two phases, Phase III was undertaken and is documented in this report. The basic objectives of Phase III were further monitoring bridge behavior (both during and after post-tensioning) and developing a practical design methodology for designing the strengthening system under investigation. Specific objectives were: to develop strain and force transducers to facilitate the collection of field data; to investigate further the existence and effects of the end restraint on the post-tensioning process; to determine the amount of post-tensioning force loss that occurred during the time between the initial testing and the retesting of the existing bridges; to determine the significance of any temporary temperature-induced post-tensioning force change; and to develop a simplified design methodology that would incorporate various variables such as span length, angle-of-skew, beam spacing, and concrete strength. Experimental field results obtained during Phases II and III were compared to the theoretical results and to each other. Conclusions from this research are as follows: (1) Strengthening single-span composite bridges by post-tensioning is a viable, economical strengthening technique. (2) Behavior of both bridges was similar to the behavior observed from the bridges during field tests conducted under Phase II. (3) The strain transducers were very accurate at measuring mid-span strain. (4) The force transducers gave excellent results under laboratory conditions, but were found to be less effective when used in actual bridge tests. (5) Loss of post-tensioning force due to temperature effects in any particular steel beam post-tensioning tendon system were found to be small. (6) Loss of post-tensioning force over a two-year period was minimal. (7) Significant end restraint was measured in both bridges, caused primarily by reinforcing steel being continuous from the deck into the abutments. This end restraint reduced the effectiveness of the post-tensioning but also reduced midspan strains due to truck loadings. (8) The SAP IV finite element model is capable of accurately modeling the behavior of a post-tensioned bridge, if guardrails and end restraints are included in the model. (9) Post-tensioning distribution should be separated into distributions for the axial force and moment components of an eccentric post-tensioning force. (10) Skews of 45 deg or less have a minor influence on post-tensioning distribution. (11) For typical Iowa three-beam and four-beam composite bridges, simple regression-derived formulas for force and moment fractions can be used to estimate post-tensioning distribution at midspan. At other locations, a simple linear interpolation gives approximately correct results. (12) A simple analytical model can accurately estimate the flexural strength of an isolated post-tensioned composite beam.

Design Manual for Strengthening Single-Span Composite Bridges by Post-Tensioning Part 3, HR-238, 1985

The authors have post-tensioned and monitored two Iowa bridges and have field tested the post-tensioning of a composite bridge in Florida. In order to provide the practical post-tensioning distribution factors given in this manual, the authors developed a finite element model of a composite bridge and checked the model against a one-half scale laboratory bridge and two actual composite bridges, one of which had a 45 deg skew. Following a brief discussion of this background research, this manual explains the use of elastic, composite beam and bridge section properties, the distribution fractions for symmetrically post-tensioned exterior beams, and a method for computing the strength of a post-tensioned beam. Also included is a design example for a typical, 51.25-ft (15.62-m) span, four-beam composite bridge. Moments for Iowa Department of Transportation rating trucks, H 20 and HS 20 trucks, have been tabulated for design convenience and are included in the appendix.

Catalogue of Mesozoic radiolarian genera. Part 2: Jurassic-Cretaceous

The catalogue of Mesozoic radiolarian genera is a revision of all described genera with re-illustration of their type species. This project was organized under the auspices of the International Association of Radiolarian Paleontologists (Inter-Rad), and was carried out by the Mesozoic Working Group. This is the second of two contributions, this one devoted to the Jurassic-Cretaceous period. It contains 581 genera with re-illustration of their type species. This part shares 30 genera in common with the Triassic catalogue, most of which arose in the Carnian, Norian and Rhaetian. The sharp difference manifested between the Triassic fauna and the Jurassic-Cretaceous fauna is so evident that it justifies two independent catalogues. A comparable division between the Jurassic and Cretaceous could not be justified however, because of the similarity of the fauna, and by the greater number of genera crossing the Jurassic-Cretaceous boundary which is three times that for the Triassic-Jurassic boundary. A distinct characteristic of Jurassic-Cretaceous genera is the high number of nomina dubia (up to 131), contrary to the low number in the Triassic interval. This reflects, in part, the influence of Haeckelian taxonomy in earlier research on Jurassic-Cretaceous faunas prior to the application of SEM techniques. The Mesozoic Working Group has carefully reviewed and re-examined the taxonomy of all available genera, their family assignment and stratigraphic ranges. Following careful comparisons, 91 genera were declared as synonyms. The review has noted 26 homonyms which were duly notified to their corresponding authors, and were corrected previous to the publication of this catalogue. In spite of this effort, unfortunately nine homonyms still remain. Two invalid nominal genera, and two nomina nuda are also reported. The systematic revisions have validated 341 genera for the Jurassic-Cretaceous interval. At the end of this catalogue 24 additional are resented as support for those genera having a poor photographs p original illustration of the type species.

Thermoset Composite Concrete Reinforcement, HR-325, Part 1, 1992

The feasibility of substituting fibercomposite (FC) (thermoset) pavement dowels for steel pavement dowels was investigated in this research project. Load transfer capacity, flexural capacity, and material properties were examined. The objectives of Part 1 of this final report included the shear behavior and strength deformations of FC dowel bars without aging. Part 2 will contain the aging effects. This model included the effects of modulus of elasticity for the pavement dowel and concrete, dowel diameter, subgrade stiffness, and concrete compressive strength. An experimental investigation was carried out to establish the modulus of dowel support which is an important parameter for the analysis of dowels. The experimental investigation included measured deflections, observed behavioral characteristics, and failure mode observations. An extensive study was performed on various shear testing procedures. A modified Iosipescu shear method was selected for the test procedure. Also, a special test frame was designed and fabricated for this procedure. The experimental values of modulus of support for shear and FC dowels were used for arriving at the critical stresses and deflections for the theoretical model developed. Different theoretical methods based on analyses suggested by Timoshenko, Friberg, Bradbury, and Westergaard were studied and a comprehensive theoretical model was developed. The fibercomposite dowels were found to provide strengths and behavioral characteristics that appear promising as a potential substitute for steel dowels.

Implementing statistical learning methods through Bayesian networks. Part 1: a guide to Bayesian parameter estimation using forensic science data

As a thorough aggregation of probability and graph theory, Bayesian networks currently enjoy widespread interest as a means for studying factors that affect the coherent evaluation of scientific evidence in forensic science. Paper I of this series of papers intends to contribute to the discussion of Bayesian networks as a framework that is helpful for both illustrating and implementing statistical procedures that are commonly employed for the study of uncertainties (e.g. the estimation of unknown quantities). While the respective statistical procedures are widely described in literature, the primary aim of this paper is to offer an essentially non-technical introduction on how interested readers may use these analytical approaches - with the help of Bayesian networks - for processing their own forensic science data. Attention is mainly drawn to the structure and underlying rationale of a series of basic and context-independent network fragments that users may incorporate as building blocs while constructing larger inference models. As an example of how this may be done, the proposed concepts will be used in a second paper (Part II) for specifying graphical probability networks whose purpose is to assist forensic scientists in the evaluation of scientific evidence encountered in the context of forensic document examination (i.e. results of the analysis of black toners present on printed or copied documents).

Le temps partagé dans la jouissance de la propriété par étages : étude de la copropriété spatio-temporelle sur une part d'étage

Introduction : Depuis plusieurs années, la pratique a développé une nouvelle forme d'utilisation de la propriété immobilière : le time-sharing, que l'on appelle aussi couramment propriété en temps partagé ou multipropriété. Son objectif est de permettre à plusieurs personnes de bénéficier du même logement de vacances en prévoyant une répartition temporelle de leur usage. Actuellement, il n'existe dans le système juridique suisse aucune disposition légale qui traite expressément du time-sharing, mais ce concept peut être valablement établi sur la base du droit en vigueur en ayant recours à différentes constructions. En effet, le droit contractuel, le droit des sociétés et les droits réels sont autant de moyens utilisés par la pratique pour atteindre le but fixé. Le choix entre ces diverses alternatives n'est toutefois pas anodin, car il détermine de manière directe la position juridique du time-sharer vis-à-vis des tiers et des personnes qui font partie de la même structure que lui. Le système du time-sharing a suscité un véritable engouement auprès des consommateurs, mais il a également donné lieu à de nombreux abus dont la presse s'est faite l'écho. Pour ces raisons, le législateur envisage aujourd'hui d'introduire des dispositions légales protectrices permettant de délimiter précisément les droits et obligations dont le time-sharer acquiert la titularité. Cette intervention législative ne consiste toutefois pas en une réglementation du time-sharing, mais uniquement en l'élaboration de normes générales qui doivent s'appliquer lors de la conclusion du contrat d'acquisition et qui se veulent compatibles avec les différentes constructions juridiques possibles. Nous avons choisi, pour la présente étude, d'examiner les possibilités qu'offrent les droits réels pour établir le partage de la jouissance d'un appartement et d'analyser la construction qui assure au consommateur la position la plus stable : celle de copropriétaire d'une part de propriété par étages. Les caractéristiques propres au time-sharing qui nous intéresse sont ainsi les suivantes : 1) Le time-sharer est un véritable propriétaire immobilier. Le droit de propriété assure une position forte à son titulaire qui bénéficie alors de tous les attributs et toutes les garanties de ce droit absolu. Mais le fait que plusieurs personnes acquièrent le même objet, nous met en présence du concept de propriété collective qu'il faut analyser afin d'expliquer la construction juridique du time-sharing en droits réels. 2) L'appartement reste toujours le même. L'objectif principal du consommateur est d'acquérir un droit de propriété sur un logement qu'il a lui-même choisi. Nous excluons ainsi les sociétés qui mettent à disposition de leurs membres un choix d'appartements que ce soit contre le versement d'une somme d'argent, par le biais d'un système d'acquisition de points-vacances, ou proportionnellement à l'investissement dans le capital social et le parc immobilier de la société. En outre, bien qu'il soit loisible à tout propriétaire d'entrer en relation avec une société d'échange afin de bénéficier d'un autre appartement, nous n'examinerons pas les rapports juridiques ainsi créés, car ils relèvent du droit contractuel et du droit des sociétés et non des droits réels. 3) L'immeuble est situé en Suisse et il est organisé en propriété par étages avant que les différents appartements qui le constituent ne soient vendus. Malgré le succès connu par le time-sharing hors de nos frontières, nous avons décidé de nous intéresser uniquement au statut réel du time-sharing en droit suisse et non aux divers problèmes qui peuvent surgir en droit international privé face aux contrats passés sous l'empire d'un droit étranger. En outre, comme nous le verrons, la structure de la propriété par étages se révèle être parfaitement adaptée au time-sharing en offrant une organisation élaborée et une communauté bénéficiant de la quasi-personnalité juridique. 4) Il n'y a aucun lien préexistant entre les différents acquéreurs et il n'est, par conséquent, pas nécessaire que l'acquisition de l'appartement se fasse simultanément et de manière collective. Dans la plupart des cas, les acquisitions seront échelonnées dans le temps et les personnes entreront en contact uniquement par le biais de leur logement commun. Le système permet donc une grande indépendance entre les différents membres du time-sharing, autant lors de l'achat que de la revente du droit de jouissance. 5) L'appartement étant vendu à de nombreuses personnes, il est nécessaire de fixer des périodes cycliques de jouissance. Celles-ci sont l'élément essentiel du time-sharing et déterminent le prix de vente par leur durée et par leur situation annuelle en haute saison ou en concordance avec les vacances scolaires. Toutefois, bien d'autres éléments nécessitent d'être règlés au niveau de l'organisation interne pour établir avec précision les droits et obligations de chacun. Le plan de notre étude comporte quatre parties principales qui portent respectivement sur la théorie de la propriété collective, sur les différentes constructions envisageables dans le domaine des droits réels, sur l'organisation de la copropriété fondant le time-sharing et sur l'examen des projets de révisions législatives à la lumière de la copropriété.

Anatomical distribution of areas of preserved cartilage in advanced femorotibial osteoarthritis using CT arthrography (Part 1).

OBJECTIVE: To determine subregions of normal and abnormal cartilage in advanced stages of femorotibial osteoarthritis (OA) by mapping the entire femorotibial joint in a cohort of pre-total knee replacement (TKR) OA knees. DESIGN: We defined an areal subdivision of the femorotibial articular cartilage surface on CT arthrography (CTA), allowing the division of the femorotibial articular surface into multiple (up to n = 204 per knee) subregions and the comparison of the same areas between different knees. Two readers independently classified each cartilage area as normal, abnormal or non-assessable in 41 consecutive pre-TKR OA knees. RESULTS: A total of 6447 cartilage areas (from 41 knees) were considered assessable by both readers. The average proportion of preserved cartilage was lower in the medial femorotibial joint than in the lateral femorotibial joint for both readers (32.0/69.8% and 33.9/68.5% (medial/lateral) for reader 1 and 2 respectively, all P < 0.001). High frequencies of normal cartilage were observed at the posterior aspect of the medial condyle (up to 89%), and the anterior aspect of the lateral femorotibial compartment (up to 100%). The posterior aspect of the medial condyle was the area that most frequently exhibited preserved cartilage in the medial femorotibial joint, contrasting with the high frequency of cartilage lesions in the rest of that compartment. CONCLUSIONS: Cartilage at the posterior aspect of the medial condyle, and at the anterior aspect of the lateral femorotibial compartment, may be frequently preserved in advanced grades of OA.

Structural investigations into the interaction of hemoglobin and part structures with bacterial endotoxins.

An understanding of details of the interaction mechanisms of bacterial endotoxins (lipopolysaccharide, LPS) with the oxygen transport protein hemoglobin is still lacking, despite its high biological relevance. Here, a biophysical investigation into the endotoxin:hemoglobin interaction is presented which comprises the use of various rough mutant LPS as well as free lipid A; in addition to the complete hemoglobin molecule from fetal sheep extract, also the partial structure alpha-chain and the heme-free sample are studied. The investigations comprise the determination of the gel-to-liquid crystalline phase behaviour of the acyl chains of LPS, the ultrastructure (type of aggregate structure and morphology) of the endotoxins, and the incorporation of the hemoglobins into artificial immune cell membranes and into LPS. Our data suggest a model for the interaction between Hb and LPS in which hemoglobins do not react strongly with the hydrophilic or with the hydrophobic moiety of LPS, but with the complete endotoxin aggregate. Hb is able to incorporate into LPS with the longitudinal direction parallel to the lipid A double-layer. Although this does not lead to a strong disturbance of the LPS acyl chain packing, the change of the curvature leads to a slightly conical molecular shape with a change of the three-dimensional arrangement from unilamellar into cubic LPS aggregates. Our previous results show that cubic LPS structures exhibit strong endotoxic activity. The property of Hb on the physical state of LPS described here may explain the observation of an increase in LPS-mediating endotoxicity due to the action of Hb.