Integration of holographic sensors into microfluidics for the real-time pH sensing of L. casei metabolism

We describe developments in the integration of analyte specific holographic sensors into PDMS-based microfluidic devices for the purpose of continuous, low-impact monitoring of extra-cellular change in micro-bioreactors. Holographic sensors respond to analyte concentration via volume change, which makes their reduction in size and integration into spatially confined fluidics difficult. Through design and process modification many of these constraints have been addressed, and a microfluidics-based device capable of real-time monitoring of the pH change caused by Lactobacillus casei fermentation is presented as a general proof-of-concept for a wide array of possible devices.

Preparation And Optical Properties Of Cdte/Cdo Center Dot Nh(2)O Core/Shell Nano-Composites In Aqueous Solution

The deposition of CdO center dot nH(2)O On CdTe nanoparticles was studied in an aqueous phase. The CdTe nanocrystals (NCs) were prepared in aqueous solution through the reaction between Cd2+ and NaHTe in the presence of thioglycolic acid as a stabilizer. The molar ratio of the Cd2+ to Te2- in the precursory solution played an important role in the photoluminescence of the ultimate CdTe NCs. The strongest photoluminescence was obtained under 4.0 of [Cd2+]/[Te2-] at pH similar to 8.2. With the optimum dosage of Cd(II) hydrous oxide deposited on the CdTe NCs, the photoluminescence was enhanced greatly. The photoluminescence of these nanocomposites was kept constant in the pH range of 8.0-10.0, but dramatically decreased with an obvious blue-shifted peak while the pH was below 8.0. In addition, the photochemical oxidation of CdTe NCs with cadmium hydrous oxide deposition was markedly inhibited.

Calidad bromatológica, organolépticas y ph en ensilaje de pasto cubano (Pennisetum purpureum x Pennisetumtyphoides) CV. CT-115 bajo el efecto de cuatro aditivos utilizados en la conservación de forraje en la finca Santa Rosa, Sabana Grande, Managua

Este estudio se realizó en la finca Santa Rosa propiedad de la Universidad Nacional Agraria en Managua, con el objetivo de evaluar lascaracterísticas organolépticas (olor, color, textura), temperatura, pH y calidadbromatológica (materia seca MS, proteína bruta PB y fibra neutro detergente FND), en ensilaje de pasto Pennisetum purpureum x PennisetumtyphoidesCV. CT- 115, bajo el efecto de cuatro aditivos para conservación: melaza, fermento de malanga, fermento de yuca y fermento de papa. El pasto fue cosechado a 60 días con tamaño de picado de2.5 cm, aplicando 800g de melaza comercial y 150cc de aditivo en cada bolsa de ensilaje, la apertura de las silobolsas se realizó a 20 días, seguidamente fueron evaluados porun jurado de expertos (4 personas). El Diseño utilizado fue un DCA con cuatro tratamientos: T1 ensilaje (CT- 115+melaza), T2 ensilaje (CT-115+melaza+fermento de malanga), el T3 ensilaje (CT- 115+melaza+fermento de yuca) y T4 ensilaje (CT-115+melaza+fermento de papa) y cuatro repeticiones, para 16 unidades experimentales. Los resultados para la variable olor en aproximación al valor ideal fueron del 87.55% para T1; T2: 88.55%, T3: 72.33% y T4: 77.74%; con respecto al color el T1 alcanzó el valor: 77.08%, T2: 100%, T3: 89.58% y T4: 85.41%; en cuanto a la textura los resultados fueron para T1, T2, y T3 del 100%, para T4: 93.77%.La variable temperatura reportó resultadosde 31.75°C para T1, T2 y T3: 32.00°C y T4: 31.50°C.Para la variable pH se encontró que el T2 presentó diferencias significativas (p<0.05) con respecto al T1 y T4, al mismo tiempo presentó diferencias altamente significativas (p<0.01) con el T3. El T1 y T4 no presentaron diferencias significativas, pero presentaron diferencias significativas (p<0.05) con respecto al T3, y obtuvieron medias (por Tukey) para T1 de 4.66, T2: 4.87, T3: 4.22 y T4: 4.45.Los resultados de calidad bromatológica para MS por tratamiento fueron29.94%, 27.84%, 28.20% y 32.59%, respetivamente. La PB alcanzó valores de 5.22%, 4.64%, 4.75% y 4.76%, por tratamiento respectivamente. La FND presentó valores por tratamiento de 55.41%, 64.10%, 63.06% y 57.01%, respectivamente. Con base en estos resultados se estima que el ensilaje del T2 presentó los mejores resultados en cuanto a características organolépticas, aunque bromatológicamente no supero al testigo (T1), el uso de aditivos de fermentos en el ensilaje mejora su calidad organoléptica.

Determinación de la concentración de pH en hojas de cultivares clonales Spondias purpurea L, en el arboretum Alain Meyrat de la Universidad Nacional Agraria, Managua, Nicaragua

La presente investigación tiene como objetivo determinar la concentración de pH en las hojas de 17 cultivares clónales de Spondias purpurea L, ubicado en el Arboretum Alain Meyrat de la Universidad Nacional Agraria, la metodología utilizada consistió en la recolección del material vegetativo de las cuales se seleccionaron 20 hojas de cada cultivar clonal en buen estado (sanas, verdes y completas). Se procedió medir con ayuda de una balanza el peso verde de las hojas separando los foliolos y el raquis la cuales se rotularon con el nombre de cada cultivar clonal. Para determinar la concentración pH de cada cultivar se recortó los foliolos y el raquis utilizando 3 g de cada muestra, se macera con un mortero hasta obtener materia molida. Una vez macerado los 3 g de cada muestra se determina la solubilidad de las hojas, haciendo uso de solventes como el agua (H₂0), benceno (C₆H₆), etanol (CH₃-CH₂-0H), y tetracloruro de carbono (CCL₄), para ello se utilizó 3 ml de cada solvente. Se empleó el uso de un pHmetro para determinar la concentración de pH de las muestras combinadas con los solventes y pH de la muestra sin solvente. Se obtuvo que el pH del cultivar San franciscano posee mayor contenido de acidez empleando los solventes químicos y el raquis seco para elaborar infusiones, por el contrario las infusiones con los foliolos secos del cultivar Cocer se obtuvo la mayor concentración de acidez

Effects of pH on Growth of Salvinia molesta Mitchell

Growth of giant salvinia ( Salvinia molesta Mitchell) under different pH regimes was examined at the Lewisville Aquatic Ecosystem Research Facility (LAERF) in Lewisville, Texas.(PDF has 5 pages.)

The Influence of Formulation, Buffering, pH and Divalent Cations on the Activity of Endothall on Hydrilla.

Endothall has been used as an aquatic herbicide for more than 40 years and provides very effective weed control of many weeds. Early research regarding the mechanism-of-action of endothall contradicts the symptomology normally associated with the product. Recent studies suggest endothall is a respiratory toxin but the mechanism-of-action remains unknown. To further elucidate the activity of endothall, several endothall formulations were evaluated for their effects on ion leakage, oxygen consumption and photosynthetic oxygen evolution from hydrilla shoot tips. The influence of pH, buffering and divalent cations was also evaluated. (PDF contains 6 pages.)

A Breakdown Criterion of Free Molecular Flows and an Optimum Analysis of EBPVD

Two important issues in electron beam physical vapor deposition (EBPVD) are addressed. The first issue is a validity condition of the classical cosine law widely used in the engineering context. This requires a breakdown criterion of the free molecular assumption on which the cosine law is established. Using the analytical solution of free molecular effusion flow, the number of collisions (N-c) for a particle moving from an evaporative source to a substrate is estimated that is proven inversely proportional to the local Knudsen number at the evaporation surface. N-c = 1 is adopted as a breakdown criterion of the free molecular assumption, and it is verified by experimental data and DSMC results. The second issue is how to realize the uniform distributions of thickness and component over a large-area thin film. Our analysis shows that at relatively low evaporation rates the goal is easy achieved through arranging the evaporative source positions properly and rotating the substrate.

Preparation and optical properties of CdTe/CdO center dot nH(2)O core/shell nano-composites in aqueous solution

The deposition of CdO center dot nH(2)O On CdTe nanoparticles was studied in an aqueous phase. The CdTe nanocrystals (NCs) were prepared in aqueous solution through the reaction between Cd2+ and NaHTe in the presence of thioglycolic acid as a stabilizer. The molar ratio of the Cd2+ to Te2- in the precursory solution played an important role in the photoluminescence of the ultimate CdTe NCs. The strongest photoluminescence was obtained under 4.0 of [Cd2+]/[Te2-] at pH similar to 8.2. With the optimum dosage of Cd(II) hydrous oxide deposited on the CdTe NCs, the photoluminescence was enhanced greatly. The photoluminescence of these nanocomposites was kept constant in the pH range of 8.0-10.0, but dramatically decreased with an obvious blue-shifted peak while the pH was below 8.0. In addition, the photochemical oxidation of CdTe NCs with cadmium hydrous oxide deposition was markedly inhibited.

In situ measurement of dissolved inorganic carbon speciation in natural waters, pH, pC02, TA, & TC02, Honolulu, Hawaii, February 16-18, 2005: workshop proceedings

The Alliance for Coastal Technology (ACT) convened a workshop on the in situ measurement of dissolved inorganic carbon species in natural waters in Honolulu, Hawaii, on February 16, 17, and 18, 2005. The workshop was designed to summarize existing technologies for measuring the abundance and speciation of dissolved inorganic carbon and to make strategic recommendations for future development and application of these technologies to coastal research and management. The workshop was not focused on any specific technology, however, most of the attention of the workshop was on in situ pC02 sensors given their recent development and use on moorings for the measurement of global carbon fluxes. In addition, the problems and limitations arising from the long-term deployment of systems designed for the measurement of pH, total dissolved inorganic carbon (DIC), and total alkalinity (TA) were discussed. Participants included researchers involved in carbon biogeochemistry, industry representatives, and coastal resource managers. The primary questions asked during the workshop were: I. What are the major impediments to transform presently used shipboard pC02 measurement systems for use on cost-eficient moorings? 2. What are the major technical hurdles for the in situ measurement of TA and DIC? 3. What specific information do we need to coordinate efforts for proof of concept' testing of existing and new technologies, inter-calibration of those technologies, better software development, and more precise knowledge quantzjjing the geochemistry of dissolved inoeanic carbon species in order to develop an observing system for dissolved inorganic carbon? Based on the discussion resulting from these three questions, the following statements were made: Statement No. 1 Cost-effective, self-contained technologies for making long-term, accurate measurements of the partial pressure of C02 gas in water already exist and at present are ready for deployment on moorings in coastal observing systems. Statement No. 2 Cost-effective, self-contained systems for the measurement of pH, TA, and DIC are still needed to both fully define the carbonate chemistry of coastal waters and the fluxes of carbon between major biogeochemical compartments (e.g., air-sea, shelf-slope, water column-sediment, etc.). (pdf contains 23 pages)

Temperature-and pH-Sensitive Nanohydrogels of Poly(N-Isopropylacrylamide) for Food Packaging Applications: Modelling the Swelling-Collapse Behaviour

Temperature-sensitive poly(N-isopropylacrylamide) (PNIPA) nanohydrogels were synthesized by nanoemulsion polymerization in water-in-oil systems. Several cross-linking degrees and the incorporation of acrylic acid as comonomer at different concentrations were tested to produce nanohydrogels with a wide range of properties. The physicochemical properties of PNIPA nanohydrogels, and their relationship with the swelling-collapse behaviour, were studied to evaluate the suitability of PNIPA nanoparticles as smart delivery systems (for active packaging). The swelling-collapse transition was analyzed by the change in the optical properties of PNIPA nanohydrogels using ultraviolet-visible spectroscopy. The thermodynamic parameters associated with the nanohydrogels collapse were calculated using a mathematical approach based on the van't Hoff analysis, assuming a two-state equilibrium (swollen to collapsed). A mathematical model is proposed to predict both the thermally induced collapse, and the collapse induced by the simultaneous action of two factors (temperature and pH, or temperature and organic solvent concentration). Finally, van't Hoff analysis was compared with differential scanning calorimetry. The results obtained allow us to solve the problem of determining the molecular weight of the structural repeating unit in cross-linked NIPA polymers, which, as we show, can be estimated from the ratio of the molar heat capacity (obtained from the van't Hoff analysis) to the specific heat capacity (obtained from calorimetric measurements).