Avaliação do índice de Litle em indivíduos que utilizaram o aparelho funcional T4K

The study aimed to assess the degree of dental crowding correction on the lower anterior region of patients treated with T4k functional appliance using Little’s irregularity index. Twenty caucasian patients of both gender (10 female and 10 male) were selected. They featured malocclusion Class I and II in mixed dentition, with chronological age between 5.7 and 11 years. The treatment lasted from 1 year and 11 months up to 3 years and 11 months. Lower anterior crowding was measured using Little’s irregularity index. Measurements were obtained on study models achieved before and after functional orthopedic therapy, using a digital caliper in millimeters and placed parallel to the occlusal plane. Overjet and overbite measurements were also performed using a caliper. Results demonstrated that the therapy provided significant decrease in overjet (average = 1.55 mm) and also in the irregularity index (average = 1.23 mm). There was a nonsignificant raise in overbite. There was no relation between the studied variables and the treatment period or even with the patient’s age in the beginning of the therapy. The treatment with T4k resulted on reduction and improvement of dental crowding.

Efeitos do aparelho de Herbst no tratamento proecoce da má oclusão classe II de Angle

Due to its high prevalence in general population, Angle Class II malocclusion has been widely studied by several authors, as well as the methods for its treatment. Among the possible treatment methods stands out the Herbst appliance. Reintroduced more than three decades ago in the orthodontics community, it became the most utilized appliance because it does not require patient compliance, and provides continued action through bilateral telescopic tubes. The objective of the present article was to demonstrate the early treatment of Class II Division 1 malocclusion with mandibular retrusion using Herbst appliance.

Eficiência do aparelho Herbst bandado na correção da Classe II divisão 1 -relato de caso

The current reports the case of a young patient with malocclusion Class II division 1 on permanent dentition treated in two stages, rthopedics and orthodontics, respectively. At first, the banded Herbst appliance was used duringa 7 months period, followed by a T4K appliance, Trainer for Kids used as retention, and on the second stage the corrective Orthodontics was performed. The results showed the acquirement of a Class I dental relationship, which was kept stable, with excellent intercuspation, even after 5 years of the removal of the Herbst appliance, as well as the correction of the overjet and the reduction of the facial profile convexity. It can be concluded that the Herbst appliance was very efficient in correcting the Class II malocclusion, long term, also providing a very favorable effect on the facial profile.

Estudo em telerradiografia em norma de 45º no tratamento da classe II com aparelho de Herbst

The aim of this retrospective study was to evaluate mandibular and maxillary changes induced by the use of Herbst applianceand by natural growth through oblique cephalometric radiographs in children with Class II division 1 malocclusion with mandibular retrusion. A sample of 49 individuals with age ranging from 8 to 10 years old (before growth peak) with Class II division 1, were into two groups: Herbst treated group (n=24) and control group (n=25). Both groups were paired for gender and chronological age. Statistical analysis was performed through Student’s t test. The Herbst appliance promoted the Class II correction in a 7 months period by mesialization of lower permanent first molars and distalization of upper permanent first molars. The Herbst appliance had no influence over the mandibular structure or the mandibular length. It was concluded that early treatment with Herbst appliance corrected the Class II malocclusion by means of dentoalveolar changes.

Fechamento de diastema anterior: associação de procedimentos ortodôntico e restaurador

Several aspects beyond the restorative phase itself such as orthodontic movement and periodontal treatment must be considered in cases of closure of diastemas. In such cases, a multidisciplinary approach is essential. As patients during orthodontic treatment may show high risk of developing dental caries and periodontal disease, inflammation of the gingival tissue is a common finding. For this reason, a preliminary basic periodontal treatment is critical to the success of restorative procedure. In addition, postoperative care and instruction in phonetics, oral hygiene and periodic control must be considered by professionals and patients. Thus, this paper demonstrates through a case report, pre and postoperative issues that should be considered during the closure of diastemas using a layering technique with resin composites

Infra-oclusão de molares decíduos: diagnóstico e tratamento

Infraocclusion of deciduous molars is defined by total or partial periodontal ligament absence and characterized by the cementum or dentin anatomical fusion with alveolar bone. This study aims to report an ankylosis clinical case, the implications and treatments management options in the deciduos dentition.

Reaproveitamento imediato da ação expansora em um caso de expansão rápida da maxila assistida cirurgicamente

Immediate reutilization of the expanding action in a case of rapid maxillary expansion surgically assisted. The orthopedic rapid maxillary expansion (RME) and rapid maxillary expansion surgically assisted (RMESA) are conducted with the aim of giving an appropriate jaw, capable of providing a normal occlusion. In extreme cases, where there is a severe atresia, it is necessary to perform an expansion beyond that allowed by the expander, followed by another conventional device or a butterfly expander, when the atresia is in the anterior maxillary region. In this situation, there are two options: wait about 90 days to allow intermaxillary suture restructuring and perform a new RME / RMESA or proceed immediately to the expansion process. Considering the biological cost, financial and clinical time, the procedure of reusing the immediate expander action becomes the technique of choice in these cases, been the operational procedure performed simplified and in just four steps. This work will show a case report where, after accomplishing the RMESA was observed that even after changing the shape of the maxillary arch, the severity of atresia could not be corrected, especially in the anterior region, and more expansion was needed. Aiming to correct the atresia in the anterior maxilla, the technique used was to reuse the immediate expander action through the change of an intraoral screw expander for a conventional butterfly type screw expander.

Tratamento da classe II divisão 2 com aparelho de Herbst após o pico de crescimento puberal

Patients with Class II division 2 malocclusion and mandibular retrusion have limited treatment options after the growth peak, such as surgical-orthodontic treatment or mandibular advancement devices. Among bite-jumping devices, the Herbst appliance allows greater increase of mandibular growth since it does not require patient compliance and allows continuous use. This case report presents the treatment of a Class II division 2 malocclusion in a patient after growth peak, performed in two stages. The first stage included the upper incisors proclination and overjet increase with multibracket appliance to benefit next stage. The second stage involved mandibular advancement using Herbst appliance aiming to correct the Class II molar relationship. The treatment resulted in a stable occlusion with periodontal health, normal functions and facial aesthetics improvement. Dental and skeletal changes arising from treatment could be assessed by cephalometric analysis and superimposition of pretreatment and post-treatment cephalometric tracings. Antero-posterior discrepancy was corrected by means of dental movement as well as by mandibular growth increment stimulated by the Herbst appliance.

Controlling mechanical undesirable side effects with a tooth indicated for extraction: free anchorage

This manuscript describes the use of a tooth indicated for extraction due
to orthodontic reasons as an anchorage aid to receive undesirable side effects caused by orthodontic uprighting of a contralateral molar tooth. The mandibular right second molar was mesially tipped as a result of loss of the adjacent first molar. Since the treatment plan involved extraction of the mandibular left first premolar, undesirable side effects associated with the molar uprighting movement were transferred to this tooth. Once the second molar was vertical, the premolar was extracted and the treatment continued. The results suggest that treatment time can be reduced if undesirable orthodontic mechanical side effects can be directed to a tooth whose extraction is indicated.

Orientação e ortorretificação de imagens terrestres nadirais

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Estudo comparativo de filmes de corantes fenotiazínicos na superfície de eletrodo de carbono vítreo e adsorvidos em titânio fosfatado e suas aplicações eletroanalíticas

Pós-graduação em Ciência dos Materiais - FEIS

Obtenção e caracterização de compósitos de benzoxazina/fibra de carbono

Pós-graduação em Engenharia Mecânica - FEG

Analysis of mesiodistal angulations of preadjusted brackets

Manufacturers offer various prescriptions of preadjusted brackets for use in the "straight-wire" orthodontic technique. However, the need to incorporate bends in the rectangular wires during orthodontic finishing has led to concerns regarding the type of prescription chosen and the credibility of information provided by the manufacturer. The aim of this study was to compare the slot angulations of Roth prescription preadjusted metallic brackets for the maxillary left central incisor and maxillary left canine. For each tooth type, 10 brackets of three commercial brands (GAC, Forestadent and Morelli) were selected. Two individual metal matrices for brackets and tooth positioning were made for each group of teeth. Captured images were obtained by standardized ortho-radial photography with a digital camera. Images were exported and analyzed with the Image J software package. One-way ANOVA and Tukey statistical analyses were performed at the 5% significance level. For brackets of the maxillary left central incisor, differences in mean angulation were observed between the Morelli and GAC groups (p < 0.01) and between the Forestadent and GAC groups (p < 0.01). For brackets of the maxillary left canine, differences in mean angulation were found between the Morelli and GAC groups (p < 0.01) and between the Morelli and Forestadent groups (p < 0.05). In conclusion, despite their same prescription name, the different brands exhibited significantly different angulation measurements.

Cálcio e fósforo para juvenis da tilápia-do-nilo

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)