Modelação de redes de distribuição de energia elétrica com carregamento não linear, incluindo elementos de regulação e compensação

Pós-graduação em Engenharia Elétrica - FEIS

In vitro biomechanical comparison of six different fixation methods following 5-mm sagittal split advancement osteotomies

The sagittal split ramus osteotomy (SSRO) is a surgical technique used widely to treat many congenital and acquired mandibular discrepancies. Stabilization of the osteotomy site and the potential for skeletal relapse after the procedure are still major problems. The aim of this study was to compare the mechanical stability of six methods of rigid fixation in SSRO using a biomechanical test model. Sixty polyurethane replicas of human hemimandibles were divided into six groups. In group I, the osteotomies were fixed with two four-hole titanium miniplates; in group II, with one four-hole miniplate; in group III, with one four-hole miniplate + a bicortical screw; in group IV, with a grid miniplate; in group V, with a four-hole locking miniplate; and in group VI, with a six-hole miniplate. A linear load in the premolar region was applied to the hemimandibles. The resistance forces (N) needed to displace the distal segment by 1, 3, and 5 mm were recorded and the data transmitted from the load cell to a computer. One-way analysis of variance with Tukey's post hoc test was performed to compare the means between groups. For the three displacement conditions, there was a strong tendency for the 2.0-mm plate + screw and the grid plate to have higher values.

Evaluation of roof slope and exposure with different roofing materials in reduced models of animal production facilities in spring and summer

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Solitons in atomic condensates, with optical lattices and field-induced dipole moments

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Genetic analysis of the temperament of Nellore cattle using linear and threshold models

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Effect of the particle size of maize, rice, and sorghum in extruded diets for dogs on starch gelatinization, digestibility, and the fecal concentration of fermentation products

The influence of rice, maize, and sorghum raw material particle size in extruded dry dog food on the digestibility of nutrients and energy and the fecal concentration of fermentation products was investigated. Three diets with similar nutrient compositions were formulated, each with 1 starch source. Before incorporation into diets, the cereals were ground into 3 different particle sizes (approximately 300, 450, and 600 mu m); therefore, a total of 9 diets were in a 3 x 3 factorial arrangement (3 cereals and 3 particle sizes). Fifty-four beagle dogs (12.0 +/- 0.1 kg BW) were randomly assigned to the diets, with 6 dogs per diet. The digestibility was measured with the chromium oxide method. The data were evaluated with ANOVA considering the carbohydrate source, grinding effect, and interactions. The means were compared with the Tukey test and polynomial contrasts (P < 0.05). With the same grinding procedure, rice was reduced to smaller particles than other cereals. The cereal mean geometric diameter (MGD) was directly related to starch gelatini-zation (SG) during extrusion. For rice diets, the MGD and SG did not change nutrient digestibility (P > 0.05); only GE digestibility was reduced at the largest MGD (P < 0.01). For maize and sorghum diets, the total tract apparent nutrient digestibility was reduced for foods with greater MGD and less SG (P < 0.01). A linear reduction in nutrient digestibility according to cereal particle size was observed for sorghum (r(2) < 0.72; P < 0.01). Higher concentrations of fecal total shortchain fatty acids (SCFA) were observed for sorghum diets (P < 0.05) than for other diets. The rice diets led to the production of feces with less lactate (P < 0.05). The increase in raw material MGD did not influence fecal SCFA for rice diets, but for the dogs fed maize and sorghum foods, an increase in propionate and butyrate concentrations were observed as MGD increased (P < 0.05). In conclusion, for dogs fed different particle sizes of the cereal starches in the extruded diets, the digestibility and fecal characteristics were affected, and this effect was ingredient dependent.

Feeding increasing concentrate to Tifton 85 hay ratios modulated rumen fermentation and microbiota in Nellore feedlot steers

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Disintegration of magnetic tablets in human stomach evaluated by alternate current biosusceptometry

Oral administration is the most convenient route for drug therapy. The knowledge of the gastrointestinal transit and specific site for drug delivery is a prerequisite for development of dosage forms. The aim of this work was to demonstrate that is possible to monitor the disintegration process of film-coated magnetic tablets by multi-sensor alternate current Biosusceptometry (ACB) in vivo and in vitro. This method is based on the recording of signals produced by the magnetic tablet using a seven sensors array and signal-processing techniques. The disintegration was confirmed by signals analysis in healthy human volunteers' measurements and in vitro experiments. Results showed that ACB is efficient to characterize the disintegration of dosage forms in the stomach, being a research tool for the development of new pharmaceutical dosage forms.

Implicações geomorfológicas das alterações do escoamento superficial pela urbanização: análise dos processos erosivos na bacia hidrográfica do córrego Tucunzinho (São Pedro - SP)

This paper presents an evaluation of the geomorphological implications of urban runoff on the evolution of linear erosion processes in peri-urban areas. The Tucunzinho watershed (São Pedro/SP) case was chosen because it presents linear erosive forms in which the dynamic is associated with urban expansion into fragile areas and implantation of inadequate dissipation devices. The method proposed by the Soil Conservation Service (SCS) was adopted to obtain the Curve Number (CN) and runoff hydrographs of different sectors of the basin. The coverage classification (use and occupancy) was based on analysis of aerial photographs of two periods (1962 and 2006, updated in the field in 2011). The IPHS1 model was used for the simulation and analysis of the hydrological behavior for both the pre-urban occupation and the current occupation. The hydrogeomorphological analysis helped understand the influence of the urban run-off on the erosion dynamics, clearly showing the ineffectiveness of dissipation energy devices in the area, which has a natural susceptibility to erosion due to litho-soil characteristics.

O papel das tecnologias digitais em disciplinas de álgebra linear a distância: possibilidades, limites e desafios

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Viabilidade técnica e econômica da incorporação do balanço eletrolítico na formulação de rações para poedeiras em segundo ciclo de produção

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Introdução à identificação de sistemas utilizando o System Identification Toolbox do MATLAB em conjunto com o Arduino para o laboratório de controle linear

The education designed and planned in a clear and objective manner is of paramount importance for universities to prepare competent professionals for the labor market, and above all can serve the population with an efficient work. Specifically, in relation to engineering, conducting classes in the laboratories it is very important for the application of theory and development of the practical part of the student. The planning and preparation of laboratories, as well as laboratory equipment and activities should be developed in a succinct and clear way, showing to students how to apply in practice what has been learned in theory and often shows them why and where it can be used when they become engineers. This work uses the MATLAB together with the System Identification Toolbox and Arduino for the identification of linear systems in Linear Control Lab. MATLAB is a widely used program in the engineering area for numerical computation, signal processing, graphing, system identification, among other functions. Thus the introduction to MATLAB and consequently the identification of systems using the System Identification Toolbox becomes relevant in the formation of students to thereafter when necessary to identify a system the base and the concept has been seen. For this procedure the open source platform Arduino was used as a data acquisition board being the same also introduced to the student, offering them a range of software and hardware for learning, giving you every day more luggage to their training

Observations on Chromosomes of Dicrostonyx torquatus stevensoni Nelson and Chromosomal Diversity in Varying Lemmings = Untersuchungen an den Chromosomen von Dicrostonyx torquatus stevensoni Nelson und chromosomale Unterschiede bei Halsbandlemmingen

English abstract: The cytogenetic characteristics of the varying lemming, Dicrostonyx torquatus stevensoni, (2n = 34), were investigated, and diploid chromosomal numbers were reported for four other nominal subspecies (exsul, nelsoni, richardsoni, and rubricatus) of the torquatus-group in North America. The diploid complements ranged from 30 to 44 chromosomes, and the fundamental number from 50 to 55. Chromosomal polymorphism was observed in all forms. In cross-breeding experiments, the mating of F1 progeny was not productive. The findings support the zoogeographic concept that populations of Dicrostonyx became fragmented or displaced southward during Würm time, with relict stocks persisting in unglaciated refugia or periglacial tundra. Speciation in the isolates led to chromosomal evolution, with the result that populations spreading from refugia in post-glacial time are reproductively isolated. The torquatus-group in North America appears to be a superspecies. German title: Untersuchungen an den Chromosomen von Dicrostonyx torquatus stevensoni Nelson und chromosomale Unterschiede bei Halsbandlemmingen German abstract: Die cytogenetischen Merkmale des Halsbandlemmings, Dicrostonyx torquatus stevensoni, (2n = 34) wurden eingehend untersucht, und für vier andere nordamerikanische Unterarten der torquatus-Gruppe wurden die somatischen Chromosomensätze festgestellt. Die Chromosomenzahl der untersuchten Populationen schwankte zwischen 30 und 44, der NF (Nombre Fondamental) zwischen 50 und 55. Zuchttiere der verschiedenen Populationen wurden erfolgreich gekreuzt, aber Sterilität der F1 Unterartbastarde war typisch. Die Halsbandlemminge wiesen Karyotypenverschiedenheiten auf, die sich durch Variationen des Robertsonschen Typus, Deletionen oder möglicherweise durch perizentrische Inversionen erklären. Die Ergebnisse sprechen dafür, daß das ursprüngliche Verbreitungsgebiet von Dicrostonyx in Nordamerika durch die letzte (Würm) Vereisung getrennt wurde, und daß die Reliktpopulationen die letzte Glazial-Phase in eisfreien Refugien oder in periglazialer Tundra überlebten, wo Karyotypevolution durch lokale Anpassungsbedürfnisse gefördert wurde. Die in der Postglazialzeit aus den Refugien sich verbreitenden Populationen von Dicrostonyx scheinen reproduktiv isoliert zu sein. Die torquatus-Gruppe in Nordamerika gilt also als Superspecies.

Introdução à identificação de sistemas utilizando o System Identification Toolbox do MATLAB em conjunto com o Arduino para o laboratório de controle linear

The education designed and planned in a clear and objective manner is of paramount importance for universities to prepare competent professionals for the labor market, and above all can serve the population with an efficient work. Specifically, in relation to engineering, conducting classes in the laboratories it is very important for the application of theory and development of the practical part of the student. The planning and preparation of laboratories, as well as laboratory equipment and activities should be developed in a succinct and clear way, showing to students how to apply in practice what has been learned in theory and often shows them why and where it can be used when they become engineers. This work uses the MATLAB together with the System Identification Toolbox and Arduino for the identification of linear systems in Linear Control Lab. MATLAB is a widely used program in the engineering area for numerical computation, signal processing, graphing, system identification, among other functions. Thus the introduction to MATLAB and consequently the identification of systems using the System Identification Toolbox becomes relevant in the formation of students to thereafter when necessary to identify a system the base and the concept has been seen. For this procedure the open source platform Arduino was used as a data acquisition board being the same also introduced to the student, offering them a range of software and hardware for learning, giving you every day more luggage to their training

Feature-oriented regional modeling and simulations (FORMS) for the western South Atlantic: Southeastern Brazil region

The multi-scale synoptic circulation system in the southeastern Brazil (SEBRA) region is presented using a feature-oriented approach. Prevalent synoptic circulation structures, or ""features,"" are identified from previous observational studies. These features include the southward-flowing Brazil Current (BC), the eddies off Cabo Sao Tome (CST - 22 degrees S) and off Cabo Frio (CF - 23 degrees S), and the upwelling region off CF and CST. Their synoptic water-mass (T-S) structures are characterized and parameterized to develop temperature-salinity (T-S) feature models. Following [Gangopadhyay, A., Robinson, A.R., Haley, PJ., Leslie, W.J., Lozano, C.j., Bisagni, J., Yu, Z., 2003. Feature-oriented regional modeling and simulation (forms) in the gulf of maine and georges bank. Cont. Shelf Res. 23 (3-4), 317-353] methodology, a synoptic initialization scheme for feature-oriented regional modeling and simulation (FORMS) of the circulation in this region is then developed. First, the temperature and salinity feature-model profiles are placed on a regional circulation template and objectively analyzed with available background climatology in the deep region. These initialization fields are then used for dynamical simulations via the Princeton Ocean Model (POM). A few first applications of this methodology are presented in this paper. These include the BC meandering, the BC-eddy interaction and the meander-eddy-upwelling system (MEUS) simulations. Preliminary validation results include realistic wave-growth and eddy formation and sustained upwelling. Our future plan includes the application of these feature models with satellite, in-situ data and advanced data-assimilation schemes for nowcasting and forecasting the SEBRA region. (c) 2008 Elsevier Ltd. All rights reserved.