Fabric handle properties of superfine wool fabrics with different fibre curvature, cashmere content and knitting tightness

The handle properties of single jersey fabrics composed of superfine wools (17 μm) of different fibre curvature (114 vs. 74 °/mm) in blends with cashmere (fibre curvature 49 °/mm) were investigated. There were four blend ratios of cashmere (0, 25, 50, 75%) plus 100% cashmere. Each of the nine fibre blend combinations were replicated three times, and each was knitted into three tightness factors. The 81 fabrics were evaluated using the Wool HandleMeter, which measures seven primary handle attributes and Overall handle, and have been calibrated using a panel of experts and a wide variety of commercial fabrics. Results were analysed by ANOVA and general linear modelling. Tightness factor significantly affected all Wool HandleMeter attribute values, with the effect of tightness factor varying according to handle attribute. The Wool HandleMeter was able to detect differences between fabrics composed of superfine wool differing in fibre curvature, with lower fibre curvature wool fabrics having more preferred Overall handle and softer, looser, cooler, lighter and less dry handle attributes at some or all tightness factors compared with fabrics composed of higher fibre curvature superfine wool. Progressively blending cashmere with wool significantly improved Overall handle, increased soft and smooth handle, reduced dry, heavy and tight handle. Linear regression modelling indicated that fabric mass per unit area explained more than 50% of the variance in overall fabric handle and in combination with variations in fabric thickness and yarn elongation could explain 71% of the variance in Overall handle.

Kinanthropometric differences between 1997 World championship junior elite and 2011 national junior elite triathletes

OBJECTIVES: In 1997, anthropometry measures were made to determine the body size and shapes of both senior and junior elite triathletes. Since then, the junior event distance has changed and the optimal morphology of participants may have evolved. Thus the objective of this study was to compare the morphology of 1997 World championship junior elite triathlon competitors with junior elite competitors in 2011. DESIGN: Comparative study of junior elite triathlete kinanthropometry. METHODS: Twenty-nine males and 20 females junior elite competitors in the 1997 Triathlon World Championships underwent 26 anthropometric measurements. Results were compared with 28 male and 14 female junior elite triathletes who competed in the 2011 Australian National Junior Series, as qualifying for 2011 Triathlon World Championships. Comparisons were made on the raw scores, as well as somatotype, and body proportional scores. RESULTS: Both male and female junior elite triathletes in the 2011 group were significantly more ectomorphic than their 1997 counterparts. The 2011 triathletes were also proportionally lighter, with significantly smaller flexed arm and thigh girths, and femur breadths. The 2011 males recorded significantly longer segmental lengths and lower endomorphy values than the 1997 junior males. CONCLUSIONS: Junior elite triathlete morphology has evolved during the past 14 years possibly as a result of changing race distance and race tactics, highlighting the importance of continually monitoring and updating such anthropometric data.

Concorrência no Mercosul: para além do Protocolo de Fortaleza

We address specific problems to be considered once the Protocolo de Fortaleza becomes a fully recognised agreement. Elimination of anti-dumping measures a la WTO, services competition and the interrelationship between the regulatory agencies and the competition offices, issues regarding the concept of relevant market and, in a broader view, harmonisation of rules, criteria, institutions and regional competitive environments, are discussed. The European experience, if properly adapted, can be of value. In this context, two important principles are singled-out: acknowledgement of an acquis Mercosul – which allows a realistic and constructive perspective when facing the integration challenges, and the wise use of subsidiarity, for faster developments with lighter central institutions. Dispute settlement, in the competition framework, is not tackled, though – in this case – we are favourable to the creation of a supranational organism. All these points do not naturally encompass everything required for the full implementation of a competition policy in Mercosul.

Formulação de grautes leves para a cimentação de poços de petróleo onshore

Grautes are dry mixes with hydraulic characteristics widely used in construction. This material comprises cement, mineral additives and dosed in accordance with the desired properties. The use of grautes in cementing oil wells potentially increases the precision in the composition of the mixture, since it is requires only the addition of the mixing water before its pumping. Such benefit may be availed in cementing wells since the formulations grautes meet the temperature and pressure characteristics typical of wells. The objective of this study is to evaluate the effect of adding different percentages of industrial minerals properties of light grautes for onshore oil wells. For the formulation of the employees were grautes light industrial minerals and waste minerals abundant in the Northeast, in addiction to Portland cement and chemical additives Special class. Grautes were formulated with densities between 1.55 g/cm3 (13.0 lb/gal) and 1.68 g/cm3 (14 lb/gal). Tests results showed that grautes with higher density in the range studied meet the specifications for cementation of shallow wells onshore. The compositions lighter can also be adjusted for applying the material in the cementation of oil wells

Avaliação da adição de Nanosílica e silicato de sódio em pastas de cimento para poços de petróleo com baixo gradiente de fratura

The oil wells cementing is a critical step during the phase of well drilling, because problems during the operation of slurry pumping and an incomplete filling of the annular space between the metal casing and the formation can cause the slurry loss. Therefore, the slurry adopted in primary cementing an oil well must be properly dosed so that these problems are avoided during its pumping. When you drill a well in a weak rock formation requires even more careful, because should be a limit of hydrostatic pressure exerted during cementation, that does not occur rock collapse. With the objective of performing the cementing of a well whose formation is weak or unconsolidated are employed lighter slurries. Thus, this study used slurries with sodium silicate and nano silica in concentrations of 0,1; 0,4; 0,7 e 1,0 gpc, in which the slurries with nano silica showed the rheological parameters higher concentrations of up to 0.7 gpc and for concentration of 1.0 the slurry with sodium silicate obtained the highest values, remaining above the limits for application in fields, mainly wells with low fracture gradient, because a significant increase in viscosity may result in an increase in pressure pumping in operations of secondary cementations. Furthermore, there was no decrease in strength with increasing concentration of additive. Then, it is possible use of these additives to formulate Lighter slurry

Estudo de modelos composicionais de óleo na injeção contínua de vapor

The objective of the thermal recovery is to heat the resevoir and the oil in it to increase its recovery. In the Potiguar river basin there are located several heavy oil reservoirs whose primary recovery energy provides us with a little oil flow, which makes these reservoirs great candidates for application of a method of recovery advanced of the oil, especially the thermal. The steam injection can occur on a cyclical or continuous manner. The continuous steam injection occurs through injection wells, which in its vicinity form a zone of steam that expands itself, having as a consequence the displace of the oil with viscosity and mobility improved towards the producing wells. Another possible mechanism of displacement of oil in reservoirs subjected to continuous injection of steam is the distillation of oil by steam, which at high temperatures; their lighter fractions can be vaporized by changing the composition of the oil produced, of the oil residual or to shatter in the amount of oil produced. In this context, this paper aims to study the influence of compositional models in the continuous injection of steam through in the analysis of some parameters such as flow injection steam and temperature of injection. Were made various leading comparative analysis taking the various models of fluid, varying from a good elementary, with 03 pseudocomponents to a modeling of fluids with increasing numbers of pseudocomponents. A commercial numerical simulator was used for the study from a homogeneous reservoir model with similar features to those found in northeastern Brazil. Some conclusions as the increasing of the simulation time with increasing number of pseudocomponents, the significant influence of flow injection on cumulative production of oil and little influence of the number of pseudocomponents in the flows and cumulative production of oil were found

Desenvolvimento ponderal de bubalinos da raça Murrah criados em pastagem de Brachiaria brizantha no Centro-Oeste do Estado de São Paulo, Brasil

Foram analisados os dados de desempenho ponderal de bubalinos Murrah do Sistema de Produção de Leite da Universidade Estadual Paulista, Faculdade de Medicina Veterinária e Zootecnia, campus de Botucatu. Os pesos foram corrigidos às diversas idades-padrão e o modelo incluiu os efeitos de sexo (S), mês (M) e ano (A) de nascimento, classe de idade da búfala ao parto (C) e as interações S x M, S x A, S x C e M x A. As médias ajustadas e respectivos erros-padrão estimados para as características estudadas foram: Peso ao Nascer (PN): 37,71 ± 8,25kg; Peso aos 120 dias (P120): 102,08 ± 16,27kg; Peso aos 240 dias (P240): 169,84 ± 22,83kg; Peso aos 365 dias (P365): 250,59 ± 25,12kg; Peso aos 550 dias (P550): 326,13 ± 39,27kg e Peso aos 730 dias (P730): 389,80 ± 31,26kg. O efeito de sexo (S) foi significativo somente para PN e P365, sendo que machos tenderam a nascer mais pesados que fêmeas. O mês de nascimento (M) exerceu efeito sobre o PN, P120 e P730 sendo que animais nascidos em maio foram os mais pesados ao nascer, enquanto os nascidos em janeiro e maio, foram os mais pesados aos 120 e 730 dias, respectivamente. O efeito de ano de foi significativo sobre o PN, P120, P240 e P730. Os filhos de búfalas das classes de idade 1 (3 anos ou menos) e da classe 6 (10,11 e 12 anos) foram os mais leves e mais pesados ao nascer, respectivamente. O fato de a classe de idade da búfala não exercer efeito sobre os P365, P550 e P730 sugere que, em rebanhos comerciais possa ser feita a substituição de búfalas não gestantes por novilhas prenhes, apesar de esta prática reduzir a média de idade do rebanho de cria. Bubalinos da raça Murrah oriundos de rebanhos leiteiros podem ser utilizados para a produção de carne.

Heat or cold chronic stress affects organ weights and Hsp70 levels in chicken embryos

This study was carried out with the objective of evaluating the effect of heat (38.8 degreesC) or cold (35.8 degreesC) stress on chicken embryo development and tissues Hsp70 levels, after the 13th day of incubation. Embryo weight (percent egg weight), organ weight (percent embryo weight) and Hsp70 levels (ng Hsp70 mug(-1) total protein) in different tissues (liver, breast muscle, heart, lungs, brain and kidney) were studied at the end of incubation. Cold stress induced a lower embryo weight and lower kidney and lungs weights, whereas heart and liver were lighter in heat-stressed embryos. An interaction between temperature and age was obtained only for Hsp70 levels in kidney and heart. Cold-stressed embryos showed higher Hsp70 levels in the brain, lungs and liver; a decrease in brain and breast muscle Hsp70 levels was seen from the 19th to 20th days in control embryos. Hsp70 levels increased with age in kidneys of control embryos and in heart of heat- and cold-stressed embryos. In conclusion, this study showed that chicken embryo organ weights are affected by incubation temperature, and that Hsp70 expression is tissue dependent (higher levels being seen in the brain) being cold-stress more effective in increasing Hsp70 levels in most studied tissues.

Habitat use, reproductive traits and social interactions in a stream-dweller treefrog endemic to the Brazilian Cerrado

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relationships between physical, morphological, and physiological characteristics of seeds developed at different positions of the ear of two maize (Zea mays L.) hybrids

Maize seeds developed at different portions of the ear of two hybrids (one, a large seeded, and the other a small seeded hybrid) were compared as to physical positions, morphological, and physiological characteristics viewing to gain information to be used during seed conditioning. The number of positions in the ear were 10, starting at the proximal and ending at the distal end. For the sake of simplification, the data were combined to refer to seeds of the proximal, the central and the distal sectors of an ear. Measurements made of the seeds as to shape (length, width, and thickness) and as to size (1,000 seeds weight) indicated that the round seeds growing at the distal sector are significantly smaller (mainly when thickness is considered) and lighter than those growing at the proximal sector. on the other hand, determinations of the physiological quality indicated that the round-proximal and the central seeds are equivalent and both significantly superior to the round-distal ones, Considering these significant differences as to size, shape, and physiological quality, a proposition of suppressing part of the round-distal from the totallity of the round seeds during the operations of seed conditioning is made.

Postharvest Conservation of Mature-Green and Ripe 'Paluma' Guava Stored at Two Temperatures

This work aimed to establish the importance of maturation and ripeness stages and the use of refrigeration for the conservation of 'Paluma' guavas. Fruit picked at the mature-green and ripe stages were stored at ambient conditions (21 degrees C and 85% RH) and also at 10 degrees C (85% RH). The fruit were evaluated every 2 or 3 days for weight loss, appearance, decay, color, firmness, soluble solids, titratable acidity, ascorbic acid, total polyphenols extractable content and total antioxidant activity. The fruit stored at 21 degrees C had higher weight loss than those stored at 10 degrees C. Mature-green guavas at 21 degrees C remained in good quality for 6 days, but at 10 degrees C, the preservation period increased to 15 days. Ripe fruit were preserved for 4 days at 21 degrees C, which was extended with refrigeration to 6 days. Mature-green fruit at 21 degrees C had decay in 6 days; while at 10 degrees C decay happened in 18 days. The peel color of mature-green fruits, at 21 degrees C, showed increasing values of luminosity, indicating that its color became lighter (change from green to yellow) and at 10 degrees C it showed constant values until the end of storage. Pulp firmness of mature-green fruit declined during storage as a result of ripening. In ripe fruits such reduction occurred more slowly, since they were softer. The color of the pulp became intense red for mature fruits. Soluble solids were lower in ripe fruit at 21 degrees C, while in mature fruits at 10 degrees C, it increased. The titratable acidity increased in fruits stored at 10 degrees C. The fruits kept at 21 degrees C and the mature guavas kept at 10 degrees C showed no changes in ascorbic acid content. The ripe fruit at 10 degrees C maintained their ascorbic acid levels. Mature guavas, stored at 10 degrees C, had the longest shelf life and higher contents of soluble solids and titratable acidity, with no changes in total polyphenols extractable content and total antioxidant activity.

Models for the analysis of growth curves for rearing tinamous (Rhynchotus rufescens) in captivity

Growth curves models provide a visual assessment of growth as a function of time, and prediction body weight at a specific age. This study aimed at estimating tinamous growth curve using different models, and at verifying their goodness of fit. A total number 11,639 weight records from 411 birds, being 6,671 from females and 3,095 from males, was analyzed. The highest estimates of a parameter were obtained using Brody (BD), von Bertalanffy (VB), Gompertz (GP,) and Logistic function (LG). Adult females were 5.7% heavier than males. The highest estimates of b parameter were obtained in the LG, GP, BID, and VB models. The estimated k parameter values in decreasing order were obtained in LG, GP, VB, and BID models. The correlation between the parameters a and k showed heavier birds are less precocious than the lighter. The estimates of intercept, linear regression coefficient, quadratic regression coefficient, and differences between quadratic coefficient of functions and estimated ties of quadratic-quadratic-quadratic segmented polynomials (QQQSP) were: 31.1732 +/- 2.41339; 3.07898 +/- 0.13287; 0.02689 +/- 0.00152; -0.05566 +/- 0.00193; 0.02349 +/- 0.00107, and 57 and 145 days, respectively. The estimated predicted mean error values (PME) of VB, GP, BID, LG, and QQQSP models were, respectively, 0.8353; 0.01715; -0.6939; -2.2453; and -0.7544%. The coefficient of determination (RI) and least square error values (MS) showed similar results. In conclusion, the VB and the QQQSP models adequately described tinamous growth. The best model to describe tinamous growth was the Gompertz model, because it presented the highest R-2 values, easiness of convergence, lower PME, and the easiness of parameter biological interpretation.

Curvas de crescimento e de deposição dos componentes corporais em aves de postura de diferentes linhagens

Objetivou-se com este trabalho determinar as curvas de crescimento de aves de postura das linhagens semipesadas Hy Line Marrom (HLM) e Hisex Marrom (HSM) e leves Hy Line W36 (HLW36) e Hisex Branca (HSB). Foram utilizadas 300 aves de cada linhagem, distribuídas em um delineamento experimental inteiramente casualizado, com quatro repetições de 75 aves por tratamento. Semanalmente, foram avaliados o peso vivo (PV), o peso de pena (PP) e a composição corporal de proteína, gordura, cinzas e água. As curvas de crescimento foram determinadas aplicando-se os dados na função de Gompertz. As aves semipesadas foram mais tardias para PV que as leves, com taxas de crescimento corporal e pesos à maturidade (PM) maiores. Aves da linhagem HLW36 foram 64,23 g mais leves à maturidade que as HSB. As respostas obtidas para o crescimento das penas e deposição protéica foram semelhantes, todavia, os PM foram maiores para as aves marrons que para as brancas. No entanto, para estes componentes, as Hy Line tiveram maiores deposições que as Hisex. A taxa de peso de pena à maturidade foi menor na linhagem HLW36, tornando-a três dias mais tardia em comparação à HSB. A menor deposição protéica no final do período de crescimento da HSM possibilitou o desvio da energia ingerida para deposição de gordura, resultando em PM superestimado em relação às aves HLM. As aves da linhagem Hy Line foram mais tardias na composição de cinzas, apresentando PM superiores ao das aves Hisex. Entre as variáveis estudadas, os PM foram sempre maiores nas aves Hy Line, no entanto, a deposição de água corporal nas aves Hisex foi maior, assim como as taxas máximas à maturidade foram mais tardias, o que justifica a semelhança no ganho de peso entre as diferentes linhagens, visto que os demais componentes estudados foram maiores para as Hy Line.

Desenvolvimento de circuitos planares sobre substratos têxteis

The use of flexible materials for the development of planar circuits is one of the most desired and studied characteristics, lately, by researchers. This happens because the flexibility of the substrate can provide previously impracticable applications, due to the rigidity of the substrates normally used that makes it difficult to fit into the circuits in irregular surfaces. The constant interest in recent years for more lighter devices, increasingly more compacts, flexible and with low cost, led to a new line of research of great interest from both academic and technological views, that is the study and development of textile substrates that can be applied in the development of planar circuits, for applications in the areas of security, biomedical and telecommunications. This paper proposes the development of planar circuits, such as antennas , frequency selective surfaces (FSS) and planar filters, using textile (cotton ticking, jeans and brim santista) as the dielectric substrate and the Pure Copper Polyester Taffeta Fabric, a textile of pure copper, highly conductive, lightweight and flexible, commercially sold as a conductive material. The electrical characteristics of textiles (electric permittivity and loss tangent) were characterized using the transmission line method (rectangular waveguide) and compared with those found in the literature. The structures were analyzed using commercial software Ansoft Designer and Ansoft HFSS, both from the company Ansys and for comparison we used the Iterative Method of Waves (WCIP). For the purpose of validation were built and measured several prototypes of antennas, planar filters and FSS, being possible to confirm an excellent agreement between simulated and measured results

Avaliação da época de estaquia e uso de bioregulador no enraizamento de estacas de figueira

O trabalho objetivou avaliar a propagação da figueira com estacas semilenhosas, empregando-se concentrações de ácido indolbutírico, em diferentes épocas de coleta. O material propagativo utilizado foi proveniente de figueiras da cv. Roxo de Valinhos, com 5 anos de idade. As estacas foram retiradas por ocasião da poda hibernal, no final dos meses de agosto, setembro e outubro, as quais foram tratadas com AIB preparado em pó, nas seguintes concentrações: 0 (testemunha); 2.500; 5.000; 7.500 e 10.000 mg kg-1. Posteriormente, foram colocadas para enraizar em bandejas de polipropileno, tendo como substrato vermiculita e mantidas sob nebulização intermitente por 70 dias. Decorrido esse período, avaliaram-se a porcentagem de estacas enraizadas (%), o comprimento da maior raiz (cm) e a massa seca das raízes (g). O delineamento experimental utilizado foi o inteiramente casualizado, em esquema fatorial 3 x 5. Observou-se que estacas provenientes do tratamento-testemunha e da poda de agosto apresentaram baixa porcentagem de enraizamento (20%), menor comprimento e massa seca de raiz, necessitando de tratamento com AIB na concentração de 2.500 mg kg-1, que aumentou significativamente esta porcentagem (90%). Estacas oriundas da poda de setembro e outubro não necessitaram de tratamento com AIB para conseguirem um elevado enraizamento. O mês de setembro foi o mais viável para a coleta de estacas de figueira, pois houve maior porcentagem de enraizamento das estacas (95-100%). As estacas tratadas com 7.500 e 10.000 mg kg-1 de AIB apresentaram as mais baixas porcentagens de enraizamento nos meses de agosto e outubro.