Optimisation of a surface mount technology process using a SnAgCu lead-free alloy

The impending introduction of lead-free solder in the manufacture of electrical and electronic products has presented the electronics industry with many challenges. European manufacturers must transfer from a tin-lead process to a lead-free process by July 2006 as a result of the publication of two directives from the European Parliament. Tin-lead solders have been used for mechanical and electrical connections on printed circuit boards for over fifty years and considerable process knowledge has been accumulated. Extensive literature reviews were conducted on the topic and as a result it was found there are many implications to be considered with the introduction of lead-free solder. One particular question that requires answering is; can lead-free solder be used in existing manufacturing processes? The purpose of this research is to conduct a comparative study of a tin-lead solder and a lead-free solder in two key surface mount technology (SMT) processes. The two SMT processes in question were the stencil printing process and the reflow soldering process. Unreplicated fractional factorial experimental designs were used to carry out the studies. The quality of paste deposition in terms of height and volume were the characteristics of interest in the stencil printing process. The quality of solder joints produced in the reflow soldering experiment was assessed using x-ray and cross sectional analysis. This provided qualitative data that was then uniquely scored and weighted using a method developed during the research. Nested experimental design techniques were then used to analyse the resulting quantitative data. Predictive models were developed that allowed for the optimisation of both processes. Results from both experiments show that solder joints of comparable quality to those produced using tin-lead solder can be produced using lead-free solder in current SMT processes.

Approved Drug Products with Theurapeutic Equivalence Evaluation - 34th edition

The publication, Approved Drug Products with Therapeutic Equivalence Evaluations (the List, commonly known as the Orange Book), identifies drug products approved on the basis of safety and effectiveness by the Food and Drug Administration (FDA) under the Federal Food, Drug, and Cosmetic Act (the Act). Drugs on the market approved only on the basis of safety (covered by the ongoing Drug Efficacy Study Implementation [DESI] review [e.g., Donnatal® Tablets and Librax® Capsules] or pre-1938 drugs [e.g., Phenobarbital Tablets]) are not included in this publication. The main criterion for the inclusion of any product is that the product is the subject of an application with an effective approval that has not been withdrawn for safety or efficacy reasons. Inclusion of products on the List is independent of any current regulatory action through administrative or judicial means against a drug product. In addition, the List contains therapeutic equivalence evaluations for approved multisource prescription drug products. These evaluations have been prepared to serve as public information and advice to state health agencies, prescribers, and pharmacists to promote public education in the area of drug product selection and to foster containment of health care costs. Therapeutic equivalence evaluations in this publication are not official FDA actions affecting the legal status of products under the Act.

International trade, technical change and the demand for skills : how important is trade in quality differential products?

Magdeburg, Univ., Fak. für Wirtschaftswiss., Diss., 2012

Storing Data in the Trial of Complex Technical Products

The article considers the ways of organization of databases for the storage of the results obtained during testing. A new variant of the organization of the data to ensure the ability to write to the database different sets of parameters in the form of chronological series. The required set of parameters depends on the modification of the tested technical installation.

Citrus products by James B. McNair.

v.6:no.1(1926)

Citrus products by James B. McNair.

v.6:no.2(1927)

Erstellung und Lokalisierung von EPUB-Dokumenten

Because of the transformation of the mainstream of information media nowadays, it is vital to constitute a standard of electronic publishing in this emerging field. EPUB is the key standard of the organization IDPF, which is the official standard format for digital books. The present dissertation aims at creating and localizing EPUB documents of the module handbook for the master's degree program software localization at Anhalt University of applied Sciences (Hochschule Anhalt) from German into Chinese as example. This dissertation describes the technical and theoretical foundations of e-book formats and represents especially the structures and features of EPUB. In order to spread the information widely in the world, localization of the products plays an important role. An introduction of localization technology and localization tools is constructed and included in the project. The work processes are mentioned, so as to show, how to translate an EPUB document and ensure good quality. The summary and the view of EPUB are illuminated at the end.

New salamanders of the genus Oedipus : with a synoptical key / by E. R. Dunn ; Reports on results of the Captain Marshall Field expeditions.

v.12:no.7(1924)

The small species of Belostoma (Heteroptera, Belostomatidae): I. Key to species groups and a revision of the denticolle group

A key to species groups of the genus Belostoma Latreille, 1807, using new taxonomic characters are presented as well as the revision of the four species included in the denticolle group: B. denticolle Montandon, 1903, and three new species: B. orbiculatum from eastern Argentina and southern Brazil, B. retusum from eastern Argentina and B. amazonum from northern Brazil which are described and illustrated.

A new species of Chondria with a key to the Bornean species (Coleptera : Endomychidae) / H. F. Strohecker.

v.34:no.32(1955)

Preliminary key to the turtles, lizards, and amphisbaenians of Iran [by] Steven C. Anderson.

v.65:no.4(1974)

First record of Chaunus achavali (Anura, Bufonidae) from Rio Grande do Sul, Brazil, with a key for the identification of the species in the Chaunus marinus group

The bufonid toad Chaunus achavali, a recently described species known only from Uruguay, is recorded for Brazil. This species is morphologically similar to C. ictericus and C. arenarum, and several individuals were labeled in Brazilian scientific collections under these taxa. A lectotype of C. arenarum is designated. Additional field notes on C. achavali and a key for the identification of the species in the Chaunus marinus group are presented.

Freshwater sponges (Porifera, Demospongiae) indicators of some coastal habitats in South America: redescriptions and key to identification

Surveys for freshwater sponges were performed at several water bodies at sandy environments along a north-south direction of particularly the Brazilian coastal line. The results allowed for the distinction of four different species-specific environments along this coastal border. The main fact considered was the dominant or the sole recurrent occurrence of a single sponge species at one particular habitat. The first one is that of the lagoonal mesohaline habitats at the tropical and subtropical realms, indicated by Spongilla alba Carter, 1849. The second one refers to shallow ponds among dunes at the tropical area indicated by Corvoheteromeyenia heterosclera (Ezcurra de Drago, 1974). The third one is that of also shallow ponds close to the dune belt at the temperate region indicated by Racekiela sheilae (Volkmer-Ribeiro, De Rosa-Barbosa & Tavares, 1988). The fourth one is that of organically enriched environments, at the marginal areas of lagoons and mouth of small rivers, evolving towards freshwater muddy ponds and coastal swamps, not far from the ocean border: Ephydatia facunda Weltner, 1895 is the species to occupy this habitat with almost exclusiveness. The above species are thus proposed as indicators of such habitats and have their descriptions improved and that of their environments summarized. A taxonomic key based on the spicules of the four species is proposed. The results presented aim to contribute to the identification of spicules of these sponges in sediment columns recovered at the Brazilian and South American coastal area. Determination of paleo ocean borders are a present issue of upmost importance in what respects projections of timing and fluctuations of ascending/regressing sea levels.

Revalidation of Acanthagrion cuyabae (Odonata, Coenagrionidae) and description of the female, with a key to the Brazilian species of the viridescens group

Acanthagrion cuyabae Calvert, 1909 was described based on a male from State of Mato Grosso, Brazil. The female of this species was described based on morphological characters of four individuals collected in copula from State of Mato Grosso do Sul, and three other specimens of same locality. Acanthagrion cuyabae is here revalidated based on morphological characters of the female. Illustrated keys to the groups of Acanthagrion Selys, 1876 and species of the viridescens group occurring in Brazil are provided.