Outsourcing de sistemas de información: situación actual, evolución y tendencias

El objetivo de este trabajo es describir detalladamente cómo es el outsourcing de sistemas de información a través de los resultados de una encuesta realizada a las mayores empresas españolas. Se trata de un estudio longitudinal que aborda 12 años, ya que se contrastan los resultados actuales con los de 2 encuestas realizadas anteriormente en el mismo ámbito y por los mismos autores. Las conclusiones apuntan a un continuismo en la configuración del outsourcing y a un mayor grado de madurez en las características de los contratos.

Smart Monitoring Embedded Service for Energy-Efficient and Sustainable Management in Data Centers

Information technologies (IT) currently represent 2% of CO2 emissions. In recent years, a wide variety of IT solutions have been proposed, focused on increasing the energy efficiency of network data centers. Monitoring is one of the fundamental pillars of these systems, providing the information necessary for adequate decision making. However, today’s monitoring systems (MSs) are partial, specific and highly coupled solutions. This study proposes a model for monitoring data centers that serves as a basis for energy saving systems, offered as a value-added service embedded in a device with low cost and power consumption. The proposal is general in nature, comprehensive, scalable and focused on heterogeneous environments, and it allows quick adaptation to the needs of changing and dynamic environments. Further, a prototype of the system has been implemented in several devices, which has allowed validation of the proposal in addition to identification of the minimum hardware profile required to support the model.

Do more with less: a framework for e-government

Dissertação apresentada ao Instituto Politécnico de Castelo Branco para cumprimento dos requisitos necessários à obtenção do grau de Mestre em Desenvolvimento de Software e Sistemas Interactivos, realizada sob a orientação científica do Doutor Arminda Guerra Lopes Professor Doutor do Departamento de Informática do Instituto Politécnico de Castelo Branco

Cadastro do Património Arbóreo da Cidade de Portalegre – Conceção de um Sistema de Informação Geográfico

Os meios urbanos são espaços cada vez mais edificados, compactos e com solos impermeabilizados, onde a ausência ou reduzida presença de espaços verdes é uma realidade. Os elementos arbóreos, qualquer que seja a sua disposição, ganham cada vez mais significado enquanto representantes do meio natural na conservação da qualidade e conforto de vida nas cidades. Este trabalho desenvolveu-se a partir do tema das árvores em meio urbano, tendo por base os benefícios das árvores nas cidades, a sua distribuição espacial e o estado de conservação deste tipo de património. O principal fio condutor passou pela concepção do inventário do Património Arbóreo da cidade de Portalegre, com recurso às novas tecnologias da informação, nomeadamente os Sistemas de Informação Geográfica, capaz de se integrar nos sistemas homólogos do Município de Portalegre. O inventário à escala do perímetro urbano da cidade de Portalegre contabilizou 2087 elementos arbóreos localizados em áreas públicas, dos quais 1500 são árvores de folha caduca e 587 são perenifólias. Registou-se um elevado índice de diversidade para aquela área, cerca de 705 árvores/km2, embora as árvores estejam distribuídas de forma heterogénea pelo território considerado, percebendo-se com isso as zonas de carência de arborização. Com este inventário foi ainda possível conceber uma avaliação económica segundo a Norma de Granada, de 13 árvores isoladas e uma alameda com 38 indivíduos, assim como propor a classificação destes elementos a Árvores de Interesse Público. Anseia-se que este trabalho seja um documento informativo e sensibilizador de todo o público em geral, mas principalmente que se assuma como uma ferramenta útil aos responsáveis pelos espaços verdes da cidade de Portalegre.

MAPEAMENTO E CARACTERIZAÇÃO DE FERRAMENTAS DE TECNOLOGIA DA INFORMAÇÃO NA CADEIA DE SUPRIMENTOS

Nos últimos tempos a utilização da Tecnologia da Informação tem-se tornado uma regra, principalmente em aplicações como na Gestão da Cadeia de Suprimentos, onde a informação passou a fazer parte do elo entre as empresas que integram esta Cadeia. A combinação de diferentes tecnologias tornou isso possível, pois empresas utilizam a Tecnologia da Informação de maneira diversificada, visando tirar melhor proveito dessa tecnologia. O presente Trabalho tem como objetivo mapear e caracterizar as diferentes Tecnologias da Informação utilizadas na Gestão da Cadeia de Suprimentos e determinar os principais fatores que as levaram a utilizar esta tecnologia. Identificou-se as principais Tecnologias da Informação normalmente encontradas na Gestão da Cadeia de Suprimentos, bem como um modelo teórico foi construído. A partir do modelo teórico desenvolveu-se um instrumento de pesquisa do tipo survey.. Utilizou-se também a prova Q de Cochran para avaliar se há diferenças na utilização da tecnologia da informação entre os diferentes tipos de empresas e apresentar os fatores que levaram as empresas a utilizarem a Tecnologia da Informação.

Adaptive Signal Processing for Power Line Communications

This thesis represents a significant part of the research activity conducted during the PhD program in Information Technologies, supported by Selta S.p.A, Cadeo, Italy, focused on the analysis and design of a Power Line Communications (PLC) system. In recent times the PLC technologies have been considered for integration in Smart Grids architectures, as they are used to exploit the existing power line infrastructure for information transmission purposes on low, medium and high voltage lines. The characterization of a reliable PLC system is a current object of research as well as it is the design of modems for communications over the power lines. In this thesis, the focus is on the analysis of a full-duplex PLC modem for communication over high-voltage lines, and, in particular, on the design of the echo canceller device and innovative channel coding schemes.

EU governance of the internet:analyzing Europol’s role in the development of a EU cyber crime and cyber security policies

In recent years, the European Union has come to view cyber security, and in particular, cyber crime as one of the most relevant challenges to the completion of its Area of Freedom, Security and Justice. Given European societies’ increased reliance on borderless and decentralized information technologies, this sector of activity has been identified as an easy target for actors such as organised criminals, hacktivists or terrorist networks. Such analysis has been accompanied by EU calls to step up the fight against unlawful online activities, namely through increased cooperation among law enforcement authorities (both national and extra- communitarian), the approximation of legislations, and public- private partnerships. Although EU initiatives in this field have, so far, been characterized by a lack of interconnection and an integrated strategy, there has been, since the mid- 2000s, an attempt to develop a more cohesive and coordinated policy. An important part of this policy is connected to the activities of Europol, which have come to assume a central role in the coordination of intelligence gathering and analysis of cyber crime. The European Cybercrime Center (EC3), which will become operational within Europol in January 2013, is regarded, in particular, as a focal point of the EU’s fight against this phenomenon. Bearing this background in mind, the present article wishes to understand the role of Europol in the development of a European policy to counter the illegal use of the internet. The article proposes to reach this objective by analyzing, through the theoretical lenses of experimental governance, the evolution of this agency’s activities in the area of cyber crime and cyber security, its positioning as an expert in the field, and the consequences for the way this policy is currently developing and is expected to develop in the near future.

Aspects of the design and control of manufacturing systems subject to demand uncertainty

The recent explosive growth in advanced manufacturing technology (AMT) and continued development of sophisticated information technologies (IT) is expected to have a profound effect on the way we design and operate manufacturing businesses. Furthermore, the escalating capital requirements associated with these developments have significantly increased the level of risk associated with initial design, ongoing development and operation. This dissertation has examined the integration of two key sub-elements of the Computer Integrated Manufacturing (CIM) system, namely the manufacturing facility and the production control system. This research has concentrated on the interactions between production control (MRP) and an AMT based production facility. The disappointing performance of such systems has been discussed in the context of a number of potential technological and performance incompatibilities between these two elements. It was argued that the design and selection of operating policies for both is the key to successful integration. Furthermore, policy decisions are shown to play an important role in matching the performance of the total system to the demands of the marketplace. It is demonstrated that a holistic approach to policy design must be adopted if successful integration is to be achieved. It is shown that the complexity of the issues resulting from such an approach required the formulation of a structured design methodology. Such a methodology was subsequently developed and discussed. This combined a first principles approach to the behaviour of system elements with the specification of a detailed holistic model for use in the policy design environment. The methodology aimed to make full use of the `low inertia' characteristics of AMT, whilst adopting a JIT configuration of MRP and re-coupling the total system to the market demands. This dissertation discussed the application of the methodology to an industrial case study and the subsequent design of operational policies. Consequently a novel approach to production control resulted. A central feature of which was a move toward reduced manual intervention in the MRP processing and scheduling logic with increased human involvement and motivation in the management of work-flow on the shopfloor. Experimental results indicated that significant performance advantages would result from the adoption of the recommended policy set.

ICT and internet use at the household levels:a melting pot of sub-optimum decision making in the case of E-Grocery shopping

Research shows that consumers are readily embracing the Internet to buy products. This paper proposes that, in the case of grocery shopping, this may lead to sub-optimal decisions at the household level. Decisions online on what, where and from who to buy are normally taken by one individual. In the case of grocery shopping, decisions, however, need to be ‘vetted’ by ‘other’ individuals within the household. The ‘household wide related’ decisions influence how information technologies and systems for commerce should be designed and managed for optimum decision making. This paper argues, unlike previous research, that e-grocery retailing is failing to grow to its full potential not solely because of the ‘classical’ hazards and perceived risks associated with doing grocery shopping online but because e-grocery retailing strategy has failed to acknowledge the micro-household level specificities that affect decision making. Our exploratory research is based on empirical evidence which were collected through telephone interviews. We offer an insight into how e-grocery ‘fits’ and is ‘disrupted’ by the reality of day to day consumption decision making at the household level. Our main finding is to advocate a more role-neutral, multi-user and multi-technology approach to e-grocery shopping which re-defines the concept of the main shopper/decision maker thereby reconceptualising the ‘shopping logic’ for grocery products.

Three-dimensional capture, representation, and manipulation of Cuneiform tablets

This paper presents the digital imaging results of a collaborative research project working toward the generation of an on-line interactive digital image database of signs from ancient cuneiform tablets. An important aim of this project is the application of forensic analysis to the cuneiform symbols to identify scribal hands. Cuneiform tablets are amongst the earliest records of written communication, and could be considered as one of the original information technologies; an accessible, portable and robust medium for communication across distance and time. The earliest examples are up to 5,000 years old, and the writing technique remained in use for some 3,000 years. Unfortunately, only a small fraction of these tablets can be made available for display in museums and much important academic work has yet to be performed on the very large numbers of tablets to which there is necessarily restricted access. Our paper will describe the challenges encountered in the 2D image capture of a sample set of tablets held in the British Museum, explaining the motivation for attempting 3D imaging and the results of initial experiments scanning the smaller, more densely inscribed cuneiform tablets. We will also discuss the tractability of 3D digital capture, representation and manipulation, and investigate the requirements for scaleable data compression and transmission methods. Additional information can be found on the project website: www.cuneiform.net

A survey based analysis of IT adoption and 3PLs' performance

Purpose: In today's competitive scenario, effective supply chain management is increasingly dependent on third-party logistics (3PL) companies' capabilities and performance. The dissemination of information technology (IT) has contributed to change the supply chain role of 3PL companies and IT is considered an important element influencing the performance of modern logistics companies. Therefore, the purpose of this paper is to explore the relationship between IT and 3PLs' performance, assuming that logistics capabilities play a mediating role in this relationship. Design/methodology/approach: Empirical evidence based on a questionnaire survey conducted on a sample of logistics service companies operating in the Italian market was used to test a conceptual resource-based view (RBV) framework linking IT adoption, logistics capabilities and firm performance. Factor analysis and ordinary least square (OLS) regression analysis have been used to test hypotheses. The focus of the paper is multidisciplinary in nature; management of information systems, strategy, logistics and supply chain management approaches have been combined in the analysis. Findings: The results indicate strong relationships among data gathering technologies, transactional capabilities and firm performance, in terms of both efficiency and effectiveness. Moreover, a positive correlation between enterprise information technologies and 3PL financial performance has been found. Originality/value: The paper successfully uses the concept of logistics capabilities as mediating factor between IT adoption and firm performance. Objective measures have been proposed for IT adoption and logistics capabilities. Direct and indirect relationships among variables have been successfully tested. © Emerald Group Publishing Limited.

Online-questionnaire design:establishing guidelines and evaluating existing eupport

As a new medium for questionnaire delivery, the internet has the potential to revolutionise the survey process. Online (web-based) questionnaires provide several advantages over traditional survey methods in terms of cost, speed, appearance, flexibility, functionality, and usability [1, 2]. For instance, delivery is faster, responses are received more quickly, and data collection can be automated or accelerated [1- 3]. Online-questionnaires can also provide many capabilities not found in traditional paper-based questionnaires: they can include pop-up instructions and error messages; they can incorporate links; and it is possible to encode difficult skip patterns making such patterns virtually invisible to respondents. Like many new technologies, however, online-questionnaires face criticism despite their advantages. Typically, such criticisms focus on the vulnerability of online-questionnaires to the four standard survey error types: namely, coverage, non-response, sampling, and measurement errors. Although, like all survey errors, coverage error (“the result of not allowing all members of the survey population to have an equal or nonzero chance of being sampled for participation in a survey” [2, pg. 9]) also affects traditional survey methods, it is currently exacerbated in online-questionnaires as a result of the digital divide. That said, many developed countries have reported substantial increases in computer and internet access and/or are targeting this as part of their immediate infrastructural development [4, 5]. Indicating that familiarity with information technologies is increasing, these trends suggest that coverage error will rapidly diminish to an acceptable level (for the developed world at least) in the near future, and in so doing, positively reinforce the advantages of online-questionnaire delivery. The second error type – the non-response error – occurs when individuals fail to respond to the invitation to participate in a survey or abandon a questionnaire before it is completed. Given today’s societal trend towards self-administration [2] the former is inevitable, irrespective of delivery mechanism. Conversely, non-response as a consequence of questionnaire abandonment can be relatively easily addressed. Unlike traditional questionnaires, the delivery mechanism for online-questionnaires makes estimation of questionnaire length and time required for completion difficult1, thus increasing the likelihood of abandonment. By incorporating a range of features into the design of an online questionnaire, it is possible to facilitate such estimation – and indeed, to provide respondents with context sensitive assistance during the response process – and thereby reduce abandonment while eliciting feelings of accomplishment [6]. For online-questionnaires, sampling error (“the result of attempting to survey only some, and not all, of the units in the survey population” [2, pg. 9]) can arise when all but a small portion of the anticipated respondent set is alienated (and so fails to respond) as a result of, for example, disregard for varying connection speeds, bandwidth limitations, browser configurations, monitors, hardware, and user requirements during the questionnaire design process. Similarly, measurement errors (“the result of poor question wording or questions being presented in such a way that inaccurate or uninterpretable answers are obtained” [2, pg. 11]) will lead to respondents becoming confused and frustrated. Sampling, measurement, and non-response errors are likely to occur when an online-questionnaire is poorly designed. Individuals will answer questions incorrectly, abandon questionnaires, and may ultimately refuse to participate in future surveys; thus, the benefit of online questionnaire delivery will not be fully realized. To prevent errors of this kind2, and their consequences, it is extremely important that practical, comprehensive guidelines exist for the design of online questionnaires. Many design guidelines exist for paper-based questionnaire design (e.g. [7-14]); the same is not true for the design of online questionnaires [2, 15, 16]. The research presented in this paper is a first attempt to address this discrepancy. Section 2 describes the derivation of a comprehensive set of guidelines for the design of online-questionnaires and briefly (given space restrictions) outlines the essence of the guidelines themselves. Although online-questionnaires reduce traditional delivery costs (e.g. paper, mail out, and data entry), set up costs can be high given the need to either adopt and acquire training in questionnaire development software or secure the services of a web developer. Neither approach, however, guarantees a good questionnaire (often because the person designing the questionnaire lacks relevant knowledge in questionnaire design). Drawing on existing software evaluation techniques [17, 18], we assessed the extent to which current questionnaire development applications support our guidelines; Section 3 describes the framework used for the evaluation, and Section 4 discusses our findings. Finally, Section 5 concludes with a discussion of further work.

Developing Collective Teaching Computer Software for the Course “Decision Theory”

Improvement of training students using modern information technologies, like collective developing teaching computer software, is discussed. Organizational, technical, technological advices are given. Experience of using information technologies in educational course “Decision Theory” is described.