Optimal static and sequential design : a critical review

The aim of this thesis is to review and augment the theory and methods of optimal experimental design. In Chapter I the scene is set by considering the possible aims of an experimenter prior to an experiment, the statistical methods one might use to achieve those aims and how experimental design might aid this procedure. It is indicated that, given a criterion for design, a priori optimal design will only be possible in certain instances and, otherwise, some form of sequential procedure would seem to be indicated. In Chapter 2 an exact experimental design problem is formulated mathematically and is compared with its continuous analogue. Motivation is provided for the solution of this continuous problem, and the remainder of the chapter concerns this problem. A necessary and sufficient condition for optimality of a design measure is given. Problems which might arise in testing this condition are discussed, in particular with respect to possible non-differentiability of the criterion function at the design being tested. Several examples are given of optimal designs which may be found analytically and which illustrate the points discussed earlier in the chapter. In Chapter 3 numerical methods of solution of the continuous optimal design problem are reviewed. A new algorithm is presented with illustrations of how it should be used in practice. It is shown that, for reasonably large sample size, continuously optimal designs may be approximated to well by an exact design. In situations where this is not satisfactory algorithms for improvement of this design are reviewed. Chapter 4 consists of a discussion of sequentially designed experiments, with regard to both the philosophies underlying, and the application of the methods of, statistical inference. In Chapter 5 we criticise constructively previous suggestions for fully sequential design procedures. Alternative suggestions are made along with conjectures as to how these might improve performance. Chapter 6 presents a simulation study, the aim of which is to investigate the conjectures of Chapter 5. The results of this study provide empirical support for these conjectures. In Chapter 7 examples are analysed. These suggest aids to sequential experimentation by means of reduction of the dimension of the design space and the possibility of experimenting semi-sequentially. Further examples are considered which stress the importance of the use of prior information in situations of this type. Finally we consider the design of experiments when semi-sequential experimentation is mandatory because of the necessity of taking batches of observations at the same time. In Chapter 8 we look at some of the assumptions which have been made and indicate what may go wrong where these assumptions no longer hold.

Improving photofermentative hydrogen production through metabolic engineering and DOE (Design of Experiments)

A l’heure actuelle, les biocarburants renouvelables et qui ne nuit pas à l'environnement sont à l'étude intensive en raison de l'augmentation des problèmes de santé et de la diminution des combustibles fossiles. H2 est l'un des candidats les plus prometteurs en raison de ses caractéristiques uniques, telles que la densité d'énergie élevée et la génération faible ou inexistante de polluants. Une façon attrayante pour produire la H2 est par les bactéries photosynthétiques qui peuvent capter l'énergie lumineuse pour actionner la production H2 avec leur système de nitrogénase. L'objectif principal de cette étude était d'améliorer le rendement de H2 des bactéries photosynthétiques pourpres non sulfureuses utilisant une combinaison de génie métabolique et le plan des expériences. Une hypothèse est que le rendement en H2 pourrait être améliorée par la redirection de flux de cycle du Calvin-Benson-Bassham envers du système de nitrogénase qui catalyse la réduction des protons en H2. Ainsi, un PRK, phosphoribulose kinase, mutant « knock-out » de Rhodobacter capsulatus JP91 a été créé. L’analyse de la croissance sur des différentes sources de carbone a montré que ce mutant ne peut croître qu’avec l’acétate, sans toutefois produire d' H2. Un mutant spontané, YL1, a été récupéré qui a retenu l'cbbP (codant pour PRK) mutation d'origine, mais qui avait acquis la capacité de se développer sur le glucose et produire H2. Une étude de la production H2 sous différents niveaux d'éclairage a montré que le rendement d’YL1 était de 20-40% supérieure à la souche type sauvage JP91. Cependant, il n'y avait pas d'amélioration notable du taux de production de H2. Une étude cinétique a montré que la croissance et la production d'hydrogène sont fortement liées avec des électrons à partir du glucose principalement dirigés vers la production de H2 et la formation de la biomasse. Sous des intensités lumineuses faibles à intermédiaires, la production d'acides organiques est importante, ce qui suggère une nouvelle amélioration additionnel du rendement H2 pourrait être possible grâce à l'optimisation des processus. Dans une série d'expériences associées, un autre mutant spontané, YL2, qui a un phénotype similaire à YL1, a été testé pour la croissance dans un milieu contenant de l'ammonium. Les résultats ont montré que YL2 ne peut croître que avec de l'acétate comme source de carbone, encore une fois, sans produire de H2. Une incubation prolongée dans les milieux qui ne supportent pas la croissance de YL2 a permis l'isolement de deux mutants spontanés secondaires intéressants, YL3 et YL4. L'analyse par empreint du pied Western a montré que les deux souches ont, dans une gamme de concentrations d'ammonium, l'expression constitutive de la nitrogénase. Les génomes d’YL2, YL3 et YL4 ont été séquencés afin de trouver les mutations responsables de ce phénomène. Fait intéressant, les mutations de nifA1 et nifA2 ont été trouvés dans les deux YL3 et YL4. Il est probable qu'un changement conformationnel de NifA modifie l'interaction protéine-protéine entre NifA et PII protéines (telles que GlnB ou GlnK), lui permettant d'échapper à la régulation par l'ammonium, et donc d'être capable d'activer la transcription de la nitrogénase en présence d'ammonium. On ignore comment le nitrogénase synthétisé est capable de maintenir son activité parce qu’en théorie, il devrait également être soumis à une régulation post-traductionnelle par ammonium. Une autre preuve pourrait être obtenue par l'étude du transcriptome d’YL3 et YL4. Une première étude sur la production d’ H2 par YL3 et YL4 ont montré qu'ils sont capables d’une beaucoup plus grande production d'hydrogène que JP91 en milieu d'ammonium, qui ouvre la porte pour les études futures avec ces souches en utilisant des déchets contenant de l'ammonium en tant que substrats. Enfin, le reformage biologique de l'éthanol à H2 avec la bactérie photosynthétique, Rhodopseudomonas palustris CGA009 a été examiné. La production d'éthanol avec fermentation utilisant des ressources renouvelables microbiennes a été traitée comme une technique mature. Cependant, la plupart des études du reformage de l'éthanol à H2 se sont concentrés sur le reformage chimique à la vapeur, ce qui nécessite généralement une haute charge énergetique et résultats dans les émissions de gaz toxiques. Ainsi le reformage biologique de l'éthanol à H2 avec des bactéries photosynthétiques, qui peuvent capturer la lumière pour répondre aux besoins énergétiques de cette réaction, semble d’être plus prometteuse. Une étude précédente a démontré la production d'hydrogène à partir d'éthanol, toutefois, le rendement ou la durée de cette réaction n'a pas été examiné. Une analyse RSM (méthode de surface de réponse) a été réalisée dans laquelle les concentrations de trois facteurs principaux, l'intensité lumineuse, de l'éthanol et du glutamate ont été variés. Nos résultats ont montré que près de 2 moles de H2 peuvent être obtenus à partir d'une mole d'éthanol, 33% de ce qui est théoriquement possible.

Designing Happiness: Architecture and urban design for joy and well-being

Scientific studies exploring the environmental and experiential elements that help boost human happiness have become a significant and expanding body of work. Some urban designers, architects and planners are looking to apply this knowledge through policy decisions and design, but there is a great deal of room for further study and exploration. This paper looks at definitions of happiness and happiness measurements used in research. The paper goes on to introduce six environmental factors identified in a literature review that have design implications relating to happiness: Nature, Light, Surprise, Access, Identity, and Sociality. Architectural precedents are examined and design strategies are proposed for each factor, which are then applied to a test case site and building in Baltimore, Maryland. It is anticipated that these factors and strategies will be useful to architects, urban designers and planners as they endeavor to design positive user experiences and set city shaping policy.

Design de equipamento médico

Dissertação de Mestrado para obtenção do grau de Mestre em Design de Produto, apresentada na Universidade de Lisboa - Faculdade de Arquitectura.

Dairy Farm Layout and Design: Building and Yard Design, Warm Climates

The current knowledge revised in this article describes a wide range of facilities in common use on dairy cattle farms in warm climates. A dairy cattle farm consists of several facilities, such as housing system, yards, manure pits, milking center, environmental protection structures, forage storage, and several machines for different facilities. Any facility design tends to be a compromise, often between many factors, and no single solution will be optimal for all concerned.

Layered Information Modeling and a Knowledge Organization Paradigm: Inherent Classification and the Design of Interoperable Systems

In knowledge technology work, as expressed by the scope of this conference, there are a number of communities, each uncovering new methods, theories, and practices. The Library and Information Science (LIS) community is one such community. This community, through tradition and innovation, theories and practice, organizes knowledge and develops knowledge technologies formed by iterative research hewn to the values of equal access and discovery for all. The Information Modeling community is another contributor to knowledge technologies. It concerns itself with the construction of symbolic models that capture the meaning of information and organize it in ways that are computer-based, but human understandable. A recent paper that examines certain assumptions in information modeling builds a bridge between these two communities, offering a forum for a discussion on common aims from a common perspective. In a June 2000 article, Parsons and Wand separate classes from instances in information modeling in order to free instances from what they call the “tyranny” of classes. They attribute a number of problems in information modeling to inherent classification – or the disregard for the fact that instances can be conceptualized independent of any class assignment. By faceting instances from classes, Parsons and Wand strike a sonorous chord with classification theory as understood in LIS. In the practice community and in the publications of LIS, faceted classification has shifted the paradigm of knowledge organization theory in the twentieth century. Here, with the proposal of inherent classification and the resulting layered information modeling, a clear line joins both the LIS classification theory community and the information modeling community. Both communities have their eyes turned toward networked resource discovery, and with this conceptual conjunction a new paradigmatic conversation can take place. Parsons and Wand propose that the layered information model can facilitate schema integration, schema evolution, and interoperability. These three spheres in information modeling have their own connotation, but are not distant from the aims of classification research in LIS. In this new conceptual conjunction, established by Parsons and Ward, information modeling through the layered information model, can expand the horizons of classification theory beyond LIS, promoting a cross-fertilization of ideas on the interoperability of subject access tools like classification schemes, thesauri, taxonomies, and ontologies. This paper examines the common ground between the layered information model and faceted classification, establishing a vocabulary and outlining some common principles. It then turns to the issue of schema and the horizons of conventional classification and the differences between Information Modeling and Library and Information Science. Finally, a framework is proposed that deploys an interpretation of the layered information modeling approach in a knowledge technologies context. In order to design subject access systems that will integrate, evolve and interoperate in a networked environment, knowledge organization specialists must consider a semantic class independence like Parsons and Wand propose for information modeling.

Creación de marca mediante la utilización de mecanismos estratégicos comunitarios y marketing

El presente documento pretende mostrar la manera como se debe ejecutar la creación de marca mediante la utilización de mecanismos estratégicos comunitarios y marketing. El objetivo del estudio se basa en encontrar los mecanismos adecuados para el desarrollo y creación de una marca enfocándose en el análisis de las principales prácticas y modelos desarrollados en el área del marketing, examinando el impacto que la marca pueda generar en la comunidad en la cual la organización está incluida, estableciendo además un conexión directa con el modo de vida de los consumidores. Durante el desarrollo del documento se demuestra que las estrategias de marketing aplicadas por cada compañía, sirven para construir una relación estrecha y fuerte con todos los agentes involucrados en la construcción de una marca, principalmente con los clientes, ya que la forma más efectiva de establecer relaciones a largo plazo, es enfocándose exclusivamente en las necesidades desarrolladas por los consumidores, y a partir de ellas ajustar los valores (misión, visión, cultura organizacional, objetivos) de la organización. Estas estrategias comunitarias son también influenciadas por varios factores internos y externos a la organización, los cuales deben ser tenidos en cuenta al momento de elegir la estrategia adecuada. Los mecanismos estratégicos que desarrollan las empresas pueden cambiar significativamente de un sector comercial a otro, la importancia de las necesidades que se deben suplir y el consumidor final se deben evaluar desde un aspecto comunitario, entendiendo como comunidad como el conjunto de grupos sociales y comerciales que tienen relación directa o indirecta con la empresa. Con la investigación llevada a cabo acerca de las estrategias que deben aplicar las compañías se concluye que las marcas reflejan la imagen que la empresa transmite a sus compradores estableciendo una relación emocional entre los consumidores y la marca desarrollada, además de estimular la oferta y demanda del negocio. Se espera que por medio de la obtención de información teórica y conceptual, se pueda aclarar la manera como se puede desarrollar la creación de una marca por medio de la correcta utilización de mecanismos estratégicos comunitarios y de marketing.

The Proces of Curriculum and Module Design

The outcome of the inductive decision -making process of the leading project management group (PMG) was the proposal to develop three modules, Human Resource Management and Knowledge Management, Quality Management and Intercultural management, each for 10 ECTS credits. As a result of the theoretical and organisational framework and analytical phase of the project, four strategies informed the development and implemen- tation of the modules: 1. Collaboration as a principle stemming from EU collaborative policy and receiving it’s expression on all implementation levels (designing the modules, modes of learning, delivering the modules, evaluation process). 2. Building on the Bologna process masters level framework to assure ap- propriate academic level of outputs. 3. Development of value -based leadership of students through transforma- tional learning in a cross -cultural setting and continual reflection of theory in practice. 4. Continual evaluation and feedback among teachers and students as a strategy to achieve a high quality programme. In the first phase of designing the modules the collaborative strategy in particular was applied, as each module was led by one university, but members from all other universities participated in the discussions and development of the mod- ules. The Bologna process masters level framework and related standards and guidelines informed the form and method of designing the modules.

Design and Off-design modelling of advanced Power-to-Gas energy storage systems

Power-to-Gas storage systems have the potential to address grid-stability issues that arise when an increasing share of power is generated from sources that have a highly variable output. Although the proof-of-concept of these has been promising, the behaviour of the processes in off-design conditions is not easily predictable. The primary aim of this PhD project was to evaluate the performance of an original Power-to-Gas system, made up of innovative components. To achieve this, a numerical model has been developed to simulate the characteristics and the behaviour of the several components when the whole system is coupled with a renewable source. The developed model has been applied to a large variety of scenarios, evaluating the performance of the considered process and exploiting a limited amount of experimental data. The model has been then used to compare different Power-to-Gas concepts, in a real scenario of functioning. Several goals have been achieved. In the concept phase, the possibility to thermally integrate the high temperature components has been demonstrated. Then, the parameters that affect the energy performance of a Power-to-Gas system coupled with a renewable source have been identified, providing general recommendations on the design of hybrid systems; these parameters are: 1) the ratio between the storage system size and the renewable generator size; 2) the type of coupled renewable source; 3) the related production profile. Finally, from the results of the comparative analysis, it is highlighted that configurations with a highly oversized renewable source with respect to the storage system show the maximum achievable profit.

Kinetic and mechanistic studies on peroxidation and stabilization of lipids with industrial and biological relevance

Lipid peroxidation is a complex mechanism that causes the degradation of lipid material of both industrial and biological significance. During processing, it is known that thermal stress produces oxidation and polymerization of oils. Additionally, biological lipids with both structural and bioactive roles are prone to peroxidation, which can have pathogenic effects including cancer and long-term degenerative disorders. To create innovative strategies to slow down the deterioration of lipids, it is crucial to improve our understanding of oxidation reactions and kinetics. To this purpose, Chapter II of this thesis focuses on the kinetic study of the oxidation reactions that take place during the thermal processing of bio-oils for industrial application. Through a new method it was possible to evaluate the kinetic parameters of oxidation of various lipid materials. This allowed us to distinguish between the different lipid materials based on their intrinsic properties. The effect of 18 antioxidants from the major families of natural and synthetic phenols were studied using the same methodology in order to acquire crucial data for enhancing the antioxidant activity of phenols based on structure-activity at high temperatures. Finally, it has been described how the antioxidant activity of α-tocopherol, revealed to be scarce in our conditions, can be improved in the presence of gamma-terpinene, through a synergistic action. Chapter III describes the synthesis and study of the antioxidant activity of polydopamine nanoparticles, in order to clarify the unclear mechanism of action of this material. Finally, in Chapter IV it was reported how the gamma-terpinene strongly inhibits the peroxidation of unsaturated lipids in heterogeneous model systems (micelles and liposomes) by forming hydroperoxyl radicals which diffuse outside the lipid nucleus, blocking the propagation of the chain radical. Furthermore, gamma-terpinene shows a very potent protective activity against ferroptosis being effective in the nanomolar range in the human neuroblastoma cell model.

Ekologisen kuorilevyn valmistaminen puunjalostusteollisuuden sivutuotteista

Puunjalostusteollisuudessa syntyy huomattavia määriä sivutuotteita, joiden hyödyntäminen on vielä vajavaista. Sahajauhon ja puukuoren pääasiallinen käyttö rajoittuu energiantuotantoon eli polttamiseen voimalaitoksissa. Selostettavassa tutkimustyössä, joka on tehty Lappeenrannan teknillisen yliopiston puunjalostustekniikan levylaboratoriossa, on pyritty selvittämään kotimaisten kuusi-, mänty- ja koivukuorten käyttömahdollisuuksia raaka-aineina lastulevyn tapaan ns. ekologisen kuorilevyn valmistamisessa, mutta ilman liimaa. Tutkimusmateriaalina käytettiin puunjalostusteollisuudesta hankittua tuoretta kuusen ja männyn rumpukuorintajätettä sekä koivun roottorikuorintajätettä, joista kukin raaka-aine pienennettiin kahteen eri partikkelikokoon käyttäen oksasilppuria ja vasaramyllyä. Raaka-ainemäärät mitattiin ja kaadettiin viiran päällä olevaan puusta valmistettuun muottiin ja muotin poisnostamisen jälkeen levyaihio puristettiin 1-välikuumapuristimessa sykleittäin. Valmistetut kuorilevyt olivat 1 -kerroksisia. Koelevyistä tutkittiin kosteuspitoisuus, tilavuuspaino, taivutuslujuus ja Brinell -kovuus.Saadut tulokset osoittavat, että kuusen, männyn ja koivun kuoresta voidaan valmistaa kuorilevyä ilman liima-ainetta, sillä puukuoren sisältämät omat liimaavuutta parantavat uuteaineet antavat riittävän vaikutuksen kuorilevyn rakenteen stabiloimiseksi. Tällaisen kuorilevyn taivutuslujuus on kuitenkin huomattavasti heikompi kuin puulastulevyllä. Kaikki jauhetusta raaka-aineesta sekä pelkästään silputusta koivuraaka-aineesta valmistetut kuorilevyt täyttävät taivutuslujuuden osalta kuitenkin huokoiselle, A-lujuusluokan standardi-kuitulevylle asetetut vaatimukset. Tarkasteltaessa eri raaka-aineista valmistettujen levyjen ominaisuuksia, voidaan todeta, että tilavuuspainoltaan suurinta sekä kovuudeltaan ja taivutuslujuudeltaan parasta levyä saadaan valmistettua jauhetusta koivukuoresta. Jokaisen valmistetun kuorilevyn kovuusarvo ylittää Suomen johtavan lastulevyn valmistajan lastulevyn kovuusarvon lukuun ottamatta pelkästään silputuista kuusi- ja mäntykuorista valmistettuja levyjä.Vaikka tulokset ovat suuntaa-antavia, osoittavat ne selvästi millaisia mahdollisuuksia tarjoaa puun kuoren tai sahajauhon käyttäminen lastulevyn tapaan valmistettavien levyjen raaka-aineena. Koko tutkimuskenttä on tässä käsiteltävänä olevalla alueella varsin laaja, ja tässä tutkimuksessa selvitetyt asiat ovat siitä vain pieni osa antaen kuitenkin suunnan useille tärkeille jatkossa selvitettäville asioille. Näistä mainittakoon mm. ekologisen levyn jatkojalostus ja tuotesuunnittelu, levyn valmistuksen taloudellisuus ja tuotteiden markkinointi, kuorilevyn valmistusprosessin kehittäminen sekä eri raaka-aineyhdistelmien kokeilu kuorilevyn raaka-aineena.

Painediffusöörin suunnitteluperusteiden kehittäminen

Pesu on tärkeä osa sellun tuotantoprosessia. Eräs tapa toteuttaa sellun pesu on käyttää painediffusööriä. Painediffusööri toimii syrjäytyspesuperiaatteella, eli poistaa sellu-massasta keittolipeää paineistetun pesuveden avulla. Työssä on kehitetty painediffusöörin suunnittelun lähtökohtia keräämällä tietoa laitteen toiminnasta, rakenteesta, valmistuksesta sekä nykyisistä epäkohdista, joihin esitetään parannusmahdollisuuksia. Tärkeimmät kehitysalueet laitteessa ovat valmistus-toleranssien väljentäminen sekä sihdin pystysuuntaisen liikkeen tuottaminen. Laitteen valmistustoleranssit on analysoitu perusteellisesti, ja niiden väljentämis-mahdollisuuksia on tutkittu. Väljentämiseen ehdotetaan erilaisia keinoja. Sihdin liike tuotetaan tällä hetkellä hydrauliikalla. Hydrauliikkakomponenteille on koottu mitoitusohjeita, joiden jälkeen esitellään keinoja hydrauliikkajärjestelmän kehittämiseen. Lopuksi esitellään muita lineaarisen liikkeen tuottamisvaihtoehtoja, joilla hydrauliikan voisi korvata. Rakenteessa käytetyille valmistusmateriaaleille on etsitty olemassa olevat yleisimpien materiaalistandardien mukaiset nimikkeet materiaalinvalinnan helpottamiseksi jatkossa. Pääasiallisten valmistusmateriaalien lisäksi on kerätty tietoa myös vaihtoehtoisista konstruktiomateriaaleista sekä materiaalinvalinnasta ja tuotesuunnittelusta yleensä.

Case Study of Applied LIP Approach/Activities in the Philippines The Training Services Enhancement Project for Rural Life Improvement (TSEP-RLI) Experience

TSEP-RLI was a technical cooperation project jointly conducted by GOP thru DA-Agricultural Training Institute (ATI) and GOJ thru JICA aimed at institutionalizing the training program for Rural Life Improvement (RLI) at the (ATI). As expected, farmers, fisherfolk, women, youth and extension agents were provided with efficient and effective training services from ATI leading to the improvement of quality of life in the rural areas through efforts of human resource development. The ATI- Bohol was chosen as the model center where participatory trials and various activities of the project were undertaken for five years. These activities were participatory surveys and data collection of on-farm and off-farm productive activities; planning workshop for RLI; feedbacking of survey results and action plans to the community and the Local Government Units (LGUs), and signing of Memorandum of Agreement between the Project and participating LGUs. The above activities were done to facilitate the planning and development of most effective and necessary rural life improvement activities, to confirm the willingness of the people to support and participate and to formalize the partnership between the Project and the LGUs. Since the concept of rural life covers a vast range of activities, a consensus had been reached that the total aspects of rural life be grasped in three spheres, namely, Production & Livelihood (P/L), Rural Living Condition (RLC) and Community Environment (C/E). The RLI for Ubi (Yam) Growers was one of the pilot activities undertaken in two pilot barangays and the target beneficiaries were members of the Rural Improvement Club (RIC- a group of organized women) with the LGU of the Municipality of Corella as the implementing partner. During the planning workshop, the barangay residents articulated their desire to promote production and processing of ubi (sphere on P/L - as the entry point), lack of nutritious food was one of the identified problem (sphere on RLC- expansion point) and environmental degradation such as deforestation, and soil erosion was another problem articulated by the community people (sphere on C/E- expansion point). Major activities that were undertaken namely, Ubi cooking contest, cooking/processing seminar, training courses on entrepreneurial development, ubi production and storage technology, packaging and product design, human resource development and simplified bookkeeping motivated the beneficiaries as well as developed and enhanced their skills & capabilities while strengthening their associations. Their participation to the 5 ubi festivals and other related activities had brought some impacts on their economic and rural life improvement activities. The seven principles of TSEP-RLI include the participatory process, holistic approach, dialogical approach, bottom -up training needs assessment, demand-driven approach, cost sharing approach and collaborative implementation with other agencies including LGUs and the community.