High-speed solid-rotor induction machine – calculation program

The aim of this thesis is to utilize the technology developed at LUT and to provide an easy tool for high-speed solid-rotor induction machine preliminary design. Computer aided design tool MathCAD has been chosen as the environment for realizing the calculation program. Four versions of the design program have been made depending on the motor rotor type. The first rotor type is an axially slitted solid-rotor with steel end rings. The next one is an axially slitted solid-rotor with copper end rings. The third machine type is a solid rotor with deep, rectangular copper bars and end rings (squirrel cage). And the last one is a solid-rotor with round copper bars and end rings (squirrel cage). Each type of rotor has its own specialties but a general thread of design is common. This paper follows the structure of the calculating program and explains some features and formulas. The attention is concentrated on the difference between laminated and solid-rotor machine design principles. There is no deep analysis of the calculation ways are presented. References for all solution methods appearing during the design procedure are given for more detailed studying. This thesis pays respect to the latest innovations in solid-rotor machines theory. Rotor ends’ analytical calculation follows the latest knowledge in this field. Correction factor for adjusting the rotor impedance is implemented. The purpose of the created design program is to calculate the preliminary dimensions of the machine according to initial data. Obtained results are not recommended for exact machine development. Further more detailed design should be done in a finite element method application. Hence, this thesis is a practical tool for the prior evaluating of the high-speed machine with different solid-rotor types parameters.

Induction practices : experiences of newly qualified teachers

The thesis consists of four studies (articles I–IV) and a comprehensive summary. The aim is to deepen understanding and knowledge of newly qualified teachers’ experiences of their induction practices. The research interest thus reflects the ambition to strengthen the research-based platform for support measures. The aim can be specified in the following four sub-areas: to scrutinise NQTs’ experiences of the profession in the transition from education to work (study I), to describe and analyse NQTs’ experiences of their first encounters with school and classroom (study II), to explore NQTs’ experiences of their relationships within the school community (study III), to view NQTs’ experiences of support through peer-group mentoring as part of the wider aim of collaboration and assessment (study IV). The overall theoretical perspective constitutes teachers’ professional development. Induction forms an essential part of this continuum and can primarily be seen as a socialisation process into the profession and the social working environment of schools, as a unique phase of teachers’ development contributing to certain experiences, and as a formal programme designed to support new teachers. These lines of research are initiated in the separate studies (I–IV) and deepened in the theoretical part of the comprehensive summary. In order to appropriately understand induction as a specific practice the lines of research are in the end united and discussed with help of practice theory. More precisely the theory of practice architectures, including semantic space, physical space-time and social space, are used. The methodological approach to integrating the four studies is above all represented by abduction and meta-synthesis. Data has been collected through a questionnaire survey, with mainly open-ended questions, and altogether ten focus group meetings with newly qualified primary school teachers in 2007–2008. The teachers (n=88 in questionnaire, n=17 in focus groups), had between one and three years of teaching experience. Qualitative content analysis and narrative analysis were used when analysing the data. What is then the collected picture of induction or the first years in the profession if scrutinising the results presented in the articles? Four dimensions seem especially to permeate the studies and emerge when they are put together. The first dimension, the relational ˗ emotional, captures the social nature of induction and teacher’s work and the emotional character intimately intertwined. The second dimension, the tensional ˗ mutable, illustrates the intense pace of induction, together with the diffuse and unclear character of a teacher’s job. The third dimension, the instructive ˗ developmental, depicts induction as a unique and intensive phase of learning, maturity and professional development. Finally, the fourth dimension, the reciprocal ˗ professional, stresses the importance of reciprocity and collaboration in induction, both formally and informally. The outlined four dimensions, or integration of results, describing induction from the experiences of new teachers, constitute part of a new synthesis, induction practice. This synthesis was generated from viewing the integrated results through the theoretical lens of practice architecture and the three spaces, semantic space, physical space-time and social space. In this way, a more comprehensive, refined and partially new architecture of teachers’ induction practices are presented and discussed.

AMB system for high-speed motors using automatic commissioning

The general trend towards increasing e ciency and energy density drives the industry to high-speed technologies. Active Magnetic Bearings (AMBs) are one of the technologies that allow contactless support of a rotating body. Theoretically, there are no limitations on the rotational speed. The absence of friction, low maintenance cost, micrometer precision, and programmable sti ness have made AMBs a viable choice for highdemanding applications. Along with the advances in power electronics, such as signi cantly improved reliability and cost, AMB systems have gained a wide adoption in the industry. The AMB system is a complex, open-loop unstable system with multiple inputs and outputs. For normal operation, such a system requires a feedback control. To meet the high demands for performance and robustness, model-based control techniques should be applied. These techniques require an accurate plant model description and uncertainty estimations. The advanced control methods require more e ort at the commissioning stage. In this work, a methodology is developed for an automatic commissioning of a subcritical, rigid gas blower machine. The commissioning process includes open-loop tuning of separate parts such as sensors and actuators. The next step is to apply a system identi cation procedure to obtain a model for the controller synthesis. Finally, a robust model-based controller is synthesized and experimentally evaluated in the full operating range of the system. The commissioning procedure is developed by applying only the system components available and a priori knowledge without any additional hardware. Thus, the work provides an intelligent system with a self-diagnostics feature and an automatic commissioning.

Pyörät liikkeelle General Motors kaasugeneraattorit

kuv., 22 x 28 cm

Induction of labor with titrated oral misoprostol solution versus oxytocin in term pregnancy: randomized controlled trial

PURPOSE: To evaluate the effectiveness and the safety of orally administered misoprostol in comparison to intravenously infused oxytocin for labor induction in term pregnant women. METHODS: Between 2008 and 2010, a total of 285 term pregnant women whom were candidate for vaginal delivery were assessed for eligibility to enter the study. Twenty five patients were excluded for different reasons; and 260 included women were randomly assigned to one of the two groups according to the method of treatment, misoprostol or oxytocin. The misoprostol group received 25 µg every 2 hours for up to 24 hours for induction. The oxytocin group received an infusion of 10 IU which was gradually increased. The time from induction to delivery and induction to the beginning of the active phase and successful inductions within 12, 18, and 24 hours were recorded. The trial is registered at irct.ir, number IRCT2012061910068N1. RESULTS: Failure of induction, leading to caesarean section was around 38.3% in the oxytocin group and significantly higher than that of the misoprostol group (20.3%) (p<0.001). Despite the more prevalent failure in the oxytocin group, the mean time intervals from induction to active phase and labor of this group were both significantly less than the misoprostol group (10.1±6.1 and 13.2±7.7 versus 12.9±5.4 and 15.6±5.1 hours respectively, both p-values were <0.05). Maternal and fetal complications were comparable between groups except gastrointestinal symptoms which were encountered more frequently in the misoprostol (10.9 versus 3.9%, p=0.03). CONCLUSIONS: Misoprostol is a safe and effective drug with low complications for the induction of labor. Failure is seen less with misoprostol and caesarean sections are less frequently indicated as compared to oxytocin.

General Motors senaste masterverk: den nya Oldsmobile modell 30

kuv., 16 x 23 cm

General Motors nimisen yhtiön viimeinen mestariteos: uusi Oldsmobile muoto 30

kuv., 16 x 23 cm

General Motors'in "Kultainen Näyttely"

kuv., 25 x 18 cm

Induction of immune response in broiler chickens immunized with recombinant FliC and challenged by Salmonella Typhimurium

The study examined (1) the immune response in broiler chickens after oral immunization with recombinant flagellin (rFliC) from Salmonella Typhimurium conjugated with sodium alginate microparticles, and the immune response enhancement in association with recombinant cholera toxin B subunit protein (rCTB) and pool of Lactobacillus spp. (PL). The immune responses were evaluated by dosage of IgY serum and IgA from intestinal fluid and immunostaining of CD8+ T lymphocytes in the cecum. The immunized animals were challenged with Salmonella Typhimurium (ST) 21 days after treatment. In all immunized groups, a significant increase (p<0.05) was observed in IgA levels (μg/mL), especially three weeks after immunization. The serum IgY levels (μg/mL) were little affected by the treatments and differed significantly among groups only in the second post-immunization week (p<0.05). After the challenge, the number of CD8+ T cells differed significantly between the treatments and negative control. Retrieval of Salmonella Typhimurium was not detected at 48 hours after the challenge in T2 (rFliC+rCTb), T3 (rFliC+PL) and T4 (rFliC+rCTB PL). The rFliC administered orally with or without rCTB and Lactobacillus spp. produces significant induction of humoral immune response, and the immunized chickens were more effective in eliminating Salmonella after challenge.

Evaluation of a model for induction of periodontal disease in dogs

There are several methods for inducing periodontal disease in animal models, being the bone defect one of the most reported. This study aimed to evaluate this model, through clinical, radiographic, tomographic and histological analyzes, thus providing standardized data for future regenerative works. Twelve dogs were subjected to the induction protocol. In a first surgical procedure, a mucoperiosteal flap was made on the buccal aspect of the right third and fourth premolars and a defect was produced exposing the furcation and mesial and distal roots, with dimensions: 5mm coronoapical, 5mm mesiodistal, and 3mm buccolingual. Periodontal ligament and cementum were curetted and the defect was filled with molding polyester, which was removed after 21 days on new surgical procedure. Clinical and radiographic examinations were performed after the two surgeries and before the collection of parts for dental tomography and histological analysis. All animals showed grade II furcation exposure in both teeth. Clinical attachment level increased after induction. Defect size did not change for coronoapical and buccolingual measurements, while mesiodistal size was significantly higher than at the time of defect production. Radiographic analysis showed decreased radiopacity and discontinuity of lamina dura in every tooth in the furcation area. The horizontal progression of the disease was evident in micro-computed tomography and defect content in the histological analysis. Therefore, it is concluded that this method promotes the induction of periodontal disease in dogs in a standardized way, thus being a good model for future work.

Histological changes in banana explants, cv. Nanicão (Musa spp., Group AAA), submitted to different auxins for induction of somatic embryogenesis

The present work analyzes the behavior of banana explants, cv. Nanicão (Musa spp. Group AAA) regarding somatic embryogenesis induction treatments with several auxins. Longitudinal segments of shoot meristematic apices of micropropagated banana plantlets cultivated and rooted in vitro were introduced in culture medium containing dicamba, picloram, 2,4-D or NAA in different concentrations. Explant samples were collected at 0, 7 and 10 days and prepared for light microscopy. Histological sections were used for comparison of the histological changes occurring after induction treatment with different auxins. Embryogenic response was observed only in treatments with picloram or dicamba, with distinct embryogenic regions observed at 14 and 21 days in culture, respectively. Histological sections of embryogenic regions of the explant at 26 days in culture revealed the formation of meristematic regions, structures with multiple root meristems, and somatic embryos at early globular stages. Embryo-like structures morphologically similar to Musa balbisiana zygotic embryos were sectioned and showed a lack of apical meristems and absence of procambial differentiation. These results indicate the induction of non-functional somatic embryos and the need for more studies on developmental aspects and maturation treatments for optimization of the process.

Callus induction and plant regeneration by Brazilian triticale and wheat genotypes

In order to determine the in vitro behavior of Brazilian triticale, 16 triticale genotypes, and three wheat genotypes used as checks, were sown in June 1994. The explants used were immature embryos. In addition to the genotype tests, two culture media for callus induction were also evaluated, i.e., MS (Murashige and Skoog, Physiol. Plant. 15: 473-497, 1962) medium containing 2.0 mg 2,4D/l, and MS medium containing 4.0 mg 2,4D/l. The plant regeneration protocol used was the one employed at the Laboratório de Cultura de Tecidos, Departamento de Plantas de Lavoura, Universidade Federal do Rio Grande do Sul, for wheat. Differences in plant regeneration were observed both among triticale and wheat genotypes, with triticale usually showing better regeneration than wheat. No differences were observed between the callus induction media.

Induction of mutations for earliness in the soybean cultivar Paraná

Mutation induction breeding through gamma ray seed treatment (22 krad) was used to obtain earliness in the soybean cultivar Paraná. Plants flowering earlier than Paraná were selected at the M3 generation. Eight mutant lines were isolated by further selections through several generations and tested in four yield trials carried out in 85/86 (Piracicaba) and 86/87 (Piracicaba, Sertãozinho and Assis) in São Paulo State. The following data were taken in these trials: number of days to flowering, yield, total plant height and height to pod insertion, flower color, pod pubescence and seed and plant growth type. Two of the mutants are of agronomic interest because they were, on average, seven to 10 days earlier in maturity than the control in all trials. Except for shorter plant height, the other agronomic characteristics remained unaltered.

Prolactin inhibits auto- and cross-induction of thyroid hormone and estrogen receptor and vitellogenin genes in adult Xenopus (Amphibia) hepatocytes

It is well known that virtually every tissue of the amphibian larvae is highly sensitive to the mutually antagonistic actions of thyroid hormone (TH) and prolactin (PRL), but it is not known if adult amphibian tissues respond similarly to these two hormones. We have previously shown that very low doses of triiodothyronine (T3) rapidly and strongly potentiate the activation of silent vitellogenin (Vit) genes by estrogen (E2) and the autoinduction of estrogen receptor (ER) transcripts in primary cultures of adult Xenopus hepatocytes. This response to T3 is accompanied by the upregulation of thyroid hormone receptor b (TRb) mRNA. Using Northern blot and RNase protection assays, we now show that ovine PRL added for 12 h along with 2 x 10-9 M T3 will completely prevent potentiation of E2 induction of Vit mRNA in primary cultures of adult Xenopus hepatocytes. PRL also abolished the auto-upregulation of TRb mRNA and the cross-activation of autoinduction of ER mRNA. Thus, we show for the first time that the anti-TH action of PRL that is manifested in Xenopus tadpole tissues during metamorphosis is retained in adult liver, and suggest that the mutually antagonistic actions of the two hormones may be brought about by similar molecular mechanisms in larval and adult amphibian tissues

Volatile cardioplegia: fast normothermic cardiac arrest induction and recovery with halothane in isolated rat hearts

To study the effect of halothane as a cardioplegic agent, ten Wistar rats were anesthetized by ether inhalation and their hearts were perfused in a Langendorff system with Krebs-Henseleit solution (36oC; 90 cm H2O pressure). After a 15-min period for stabilization the control values for heart rate, force (T), dT/dt and coronary flow were recorded and a halothane-enriched solution (same temperature and pressure) was perfused until cardiac arrest was obtained. The same Krebs-Henseleit solution was reperfused again and the parameters studied were recorded after 1, 3, 5, 10, 20 and 30 min. Cardiac arrest occurred in all hearts during the first two min of perfusion with halothane-bubbled solution. One minute after reperfusion without halothane, the following parameters reported in terms of control values were obtained: 90.5% of control heart rate (266.9 ± 43.4 to 231.5 ± 71.0 bpm), 20.2% of the force (1.83 ± 0.28 to 0.37 ± 0.25 g), 19.8% of dT/dt (46.0 ± 7.0 to 9.3 ± 6.0 g/s) and 90.8% of coronary flow (9.9 ± 1.5 to 9.4 ± 1.5 ml/min). After 3 min of perfusion they changed to 99.0% heart rate (261.0 ± 48.2), 98.9% force (1.81 ± 0.33), 98.6 dT/dt (45.0 ± 8.2) and 94.8% coronary flow (9.3 ± 1.4). At 5 min 100.8% (267.0 ± 40.6) heart rate, 105.0% (1.92 ± 0.29) force and 104.4% (48.2 ± 7.2) dT/dt were recorded and maintained without significant differences (P>0.01) until the end of the experiment. These data demonstrate that volatile cardioplegia with halothane is an effective technique for fast induction of and prompt recovery from normothermic cardiac arrest of the rat heart