Implementation of road dust resuspension in air quality simulations of particulate matter in Madrid (Spain)

An evaluation of the concentration levels of Particulate Matter (PM) was carried out in Madrid (Spain) by introducing the emissions from road dust resuspension. Road dust resuspension emission factors (EF) for different types of vehicles were calculated from EPA-AP42, a global resuspension factor of 0.097 g veh−1km−1 as described in Amato et al. (2010) and a rain-dependent correction factor. With these resuspension EFs, a simulation at street canyon level was performed with the OSPM model without rainfall. Subsequently, a simulation using the CMAQ model was implemented adding resuspension emissions affected by the rain. These data were compared with monitored data obtained from air quality stations. OSPM model simulations with resuspension EFs but without the effect of rainfall improve the PM estimates in about 20gm−3μ compared to the simulation with default EFs. Total emissions were calculated by adding the emissions estimated with resuspension EFs to the default PM emissions to be used by CMAQ. For the study in the Madrid Area, resuspension emissions are approximately of the same order of magnitude as inventoried emissions. On a monthly scale, rain effects are negligible for resuspension emissions due to the dry weather conditions of Spain. With the exception of April and May, the decrease in resuspension emissions is not >3%. The predicted PM10 concentration increases up to 9μ gm−3 on annual average for each station compared to the same scenario without resuspension. However, in both cases, PM 10 estimates with resuspension are still underestimating observations. It should be noted that although that accounting for resuspension improves the quality of model predictions, other PM sources (e.g., Saharan dust) were not considered in this study.

Odor space and olfactory processing: Collective algorithms and neural implementation

Several basic olfactory tasks must be solved by highly olfactory animals, including background suppression, multiple object separation, mixture separation, and source identification. The large number N of classes of olfactory receptor cells—hundreds or thousands—permits the use of computational strategies and algorithms that would not be effective in a stimulus space of low dimension. A model of the patterns of olfactory receptor responses, based on the broad distribution of olfactory thresholds, is constructed. Representing one odor from the viewpoint of another then allows a common description of the most important basic problems and shows how to solve them when N is large. One possible biological implementation of these algorithms uses action potential timing and adaptation as the “hardware” features that are responsible for effective neural computation.

Decomposition of human behavior using model of competencies: application to robotic control system

For many years, humans and machines have shared the same physical space. To facilitate their interaction with humans, their social integration and for more rational behavior has been sought that the robots demonstrate human-like behavior. For this it is necessary to understand how human behavior is generated, discuss what tasks are performed and how relate to themselves, for subsequent implementation in robots. In this paper, we propose a model of competencies based on human neuroregulator system for analysis and decomposition of behavior into functional modules. Using this model allow separate and locate the tasks to be implemented in a robot that displays human-like behavior. As an example, we show the application of model to the autonomous movement behavior on unfamiliar environments and its implementation in various simulated and real robots with different physical configurations and physical devices of different nature. The main result of this work has been to build a model of competencies that is being used to build robotic systems capable of displaying behaviors similar to humans and consider the specific characteristics of robots.

GPGPU implementation of growing neural gas: application to 3D scene reconstruction

Self-organising neural models have the ability to provide a good representation of the input space. In particular the Growing Neural Gas (GNG) is a suitable model because of its flexibility, rapid adaptation and excellent quality of representation. However, this type of learning is time-consuming, especially for high-dimensional input data. Since real applications often work under time constraints, it is necessary to adapt the learning process in order to complete it in a predefined time. This paper proposes a Graphics Processing Unit (GPU) parallel implementation of the GNG with Compute Unified Device Architecture (CUDA). In contrast to existing algorithms, the proposed GPU implementation allows the acceleration of the learning process keeping a good quality of representation. Comparative experiments using iterative, parallel and hybrid implementations are carried out to demonstrate the effectiveness of CUDA implementation. The results show that GNG learning with the proposed implementation achieves a speed-up of 6× compared with the single-threaded CPU implementation. GPU implementation has also been applied to a real application with time constraints: acceleration of 3D scene reconstruction for egomotion, in order to validate the proposal.

Fénix: a flexible information exchange data model for natural language processing

In this paper we describe Fénix, a data model for exchanging information between Natural Language Processing applications. The format proposed is intended to be flexible enough to cover both current and future data structures employed in the field of Computational Linguistics. The Fénix architecture is divided into four separate layers: conceptual, logical, persistence and physical. This division provides a simple interface to abstract the users from low-level implementation details, such as programming languages and data storage employed, allowing them to focus in the concepts and processes to be modelled. The Fénix architecture is accompanied by a set of programming libraries to facilitate the access and manipulation of the structures created in this framework. We will also show how this architecture has been already successfully applied in different research projects.

Model of Competencies for Decomposition of Human Behavior: Application to Control System of Robots

Humans and machines have shared the same physical space for many years. To share the same space, we want the robots to behave like human beings. This will facilitate their social integration, their interaction with humans and create an intelligent behavior. To achieve this goal, we need to understand how human behavior is generated, analyze tasks running our nerves and how they relate to them. Then and only then can we implement these mechanisms in robotic beings. In this study, we propose a model of competencies based on human neuroregulator system for analysis and decomposition of behavior into functional modules. Using this model allow separate and locate the tasks to be implemented in a robot that displays human-like behavior. As an example, we show the application of model to the autonomous movement behavior on unfamiliar environments and its implementation in various simulated and real robots with different physical configurations and physical devices of different nature. The main result of this study has been to build a model of competencies that is being used to build robotic systems capable of displaying behaviors similar to humans and consider the specific characteristics of robots.

Assessment of University External Internships. Towards a Mixed Model for Measuring the Acquisition of Skills and the Satisfaction of Parties Involved

The continuous improvement of management and assessment processes for curricular external internships has led a group of university teachers specialised in this area to develop a mixed model of measurement that combines the verification of skill acquisition by those students choosing external internships with the satisfaction of the parties involved in that process. They included academics, educational tutors of companies and organisations and administration and services personnel in the latter category. The experience, developed within University of Alicante, has been carried out in the degrees of Business Administration and Management, Business Studies, Economics, Advertising and Public Relations, Sociology and Social Work, all part of the Faculty of Economics and Business. By designing and managing closed standardised interviews and other research tools, validated outside the centre, a system of continuous improvement and quality assurance has been created, clearly contributing to the gradual increase in the number of students with internships in this Faculty, as well as to the improvement in satisfaction, efficiency and efficacy indicators at a global level. As this experience of educational innovation has shown, the acquisition of curricular knowledge, skills, abilities and competences by the students is directly correlated with the satisfaction of those parties involved in a process that takes the student beyond the physical borders of a university campus. Ensuring the latter is a task made easier by the implementation of a mixed assessment method, combining continuous and final assessment, and characterised by its rigorousness and simple management. This report presents that model, subject in turn to a persistent and continuous control, a model all parties involved in the external internships are taking part of. Its short-term results imply an increase, estimated at 15% for the last course, in the number of students choosing curricular internships and, for the medium and long-term, a major interweaving between the academic world and its social and productive environment, both in the business and institutional areas. The potentiality of this assessment model does not lie only in the quality of its measurement tools, but also in the effects from its use in the various groups and in the actions that are carried out as a result of its implementation and which, without any doubt and as it is shown below, are the real guarantee of a continuous improvement.

Implementation of non-local boundary layer schemes in the Regional Atmospheric Modeling System and its impact on simulated mesoscale circulations

This paper proposes the implementation of different non-local Planetary Boundary Layer schemes within the Regional Atmospheric Modeling System (RAMS) model. The two selected PBL parameterizations are the Medium-Range Forecast (MRF) PBL and its updated version, known as the Yonsei University (YSU) PBL. YSU is a first-order scheme that uses non-local eddy diffusivity coefficients to compute turbulent fluxes. It is based on the MRF, and improves it with an explicit treatment of the entrainment. With the aim of evaluating the RAMS results for these PBL parameterizations, a series of numerical simulations have been performed and contrasted with the results obtained using the Mellor and Yamada (MY) scheme, also widely used, and the standard PBL scheme in the RAMS model. The numerical study carried out here is focused on mesoscale circulation events during the summer, as these meteorological situations dominate this season of the year in the Western Mediterranean coast. In addition, the sensitivity of these PBL parameterizations to the initial soil moisture content is also evaluated. The results show a warmer and moister PBL for the YSU scheme compared to both MRF and MY. The model presents as well a tendency to overestimate the observed temperature and to underestimate the observed humidity, considering all PBL schemes and a low initial soil moisture content. In addition, the bias between the model and the observations is significantly reduced moistening the initial soil moisture of the corresponding run. Thus, varying this parameter has a positive effect and improves the simulated results in relation to the observations. However, there is still a significant overestimation of the wind speed over flatter terrain, independently of the PBL scheme and the initial soil moisture used, even though a different degree of accuracy is reproduced by RAMS taking into account the different sensitivity tests.

The gas target model for the Visegard 4 Region: conceptual analysis. OSW Report, May 2013

The similarity of issues and geographical proximity have led the Visegrad 4 countries (V4) to undertake closer collaboration in natural gas policy, notably by agreeing on a common security of supply strategy, including regional emergency planning, and a common implementation of the Gas Target Model (GTM) that European regulators have proposed for the medium-long term design of the EU gas market, and which has been endorsed by the Madrid Regulatory Forum. As a contribution to this collaboration, the present paper will analyse how the GTM may be implemented in the V4 region, with a view to maximize the benefits that arise from joint implementation. A most relevant conclusion of the GTM is that markets should be large enough to attract market players and investments, so that sufficient diversity of sources may be reached and market power indicators are kept below dangerous levels. In most cases, this requires physical and/or virtual interconnection of present markets, which is also useful to achieve the required security of supply standards, as envisaged in the Regulation 994/2010/EC.

The Danish Flexicurity Model - a Lesson for the US? ACES Working Paper No. 2, May 2007

Within recent years, increasing international competition has caused an increase in job transitions worldwide. Many countries find it difficult to manage these transitions in a way that ensures a match between labour and demand. One of the countries that seem to manage the transitions in a successful way is Denmark, where unemployment has been dropping dramatically over the last decade without a drop in job quality. This success is ascribed the so-called Danish flexicurity model, where an easy access to hiring and firing employees (flexibility) is combined with extensive active and passive labour market policies (security). The Danish results have gained interest not only among other European countries, where unemployment rates remain high, but also in the US, where job loss is often related to lower job quality. It has, however, been subject to much debate both in Europe and in the US, whether or not countries with distinctively different political-economic settings can learn from one another. Some have argued that cultural differences impose barriers to successful policy transfer, whereas others see it as a perfectly rational calculus to introduce 'best practices' from elsewhere. This paper presents a third strategy. Recent literature on policy transfer suggests that successful cross national policy transfer is possible, even across the Atlantic, but that one must be cautious in choosing the form, content and level of the learning process. By analysing and comparing the labour market policies and their settings in Denmark and the US in detail, this paper addresses the question, what and how the US can learn from the Danish model. Where the US and Denmark share a high degree of flexibility, they differ significantly on the level of security. This also means that the Danish budget for active and passive labour market policies is significantly higher than the American, and it seems unlikely that political support for the introduction of Danish levels of security in the US can be established. However, the paper concludes that there is a learning potential between the US and Demnark in the different local level efficiency of the money already spent. A major reason for the Danish success has been the introduction of tailor made initiatives to the single displaced worker and a stronger coordination between local level actors. Both of which are issues, where a lack of efficiency in the implementation of American active labour market policies has been reported.

The EU-Turkey Customs Union: A model for Future Euro-Med Integration. MEDPRO Technical Report No. 9/March 2012

This paper studying the 1995 EU-Turkey Customs Union (CU) reveals that the CU has been a major instrument of integration of the Turkish economy into the EU and global markets, offering powerful tools to reform the Turkish economy. Turkish producers of industrial goods are protected by tariffs from external competition to exactly the same extent as EU producers, and they face competition from duty-free imports of industrial goods from world-class pan-European firms. In return, Turkish industrial producers have duty-free market access to the European Economic Area, which was recently extended to certain Mediterranean countries. Trade liberalisation achieved through the CU has thus successfully moved the Turkish economy from a government-controlled regime to a market-based one, and Turkish producers of industrial goods have performed remarkably well. The paper further shows that market access conditions for Turkish producers are determined, in addition to tariffs, by standards, conformity assessment procedures, competition policy, industrial property rights and contingent protectionism measures. The CU also offered Turkey the opportunity to establish new institutions, and modernise and upgrade rules and disciplines required for the elimination of technical barriers to trade, and for the implementation of the EU’s competition, industrial property rights, and contingent protectionism policies.

Application of the Hidden Markov Model for Innovative Projects "Viability" Analysis

This master thesis deals with determining of innovative projects "viability". "Viability" is the probability of innovative project being implemented. Hidden Markov Models are used for evaluation of this factor. The problem of determining parameters of model, which produce given data sequence with the highest probability, are solving in this research. Data about innovative projects contained in reports of Russian programs "UMNIK", "START" and additional data obtained during study are used as input data for determining of model parameters. The Baum-Welch algorithm which is one implementation of expectation-maximization algorithm is used at this research for calculating model parameters. At the end part of the master thesis mathematical basics for practical implementation are given (in particular mathematical description of the algorithm and implementation methods for Markov models).

Early implementation of Generation I of the Workforce Innovation in Regional Economic Development (WIRED) Initiative : 2007 interim evaluation report /

"ETA Occasional Paper 2008-03."

A Kinetic Vlasov Model for Plasma Simulation Using Discontinuous Galerkin Method on Many-Core Architectures

Thesis (Ph.D.)--University of Washington, 2016-03

Salivary Gland and Tooth Abnormalities Massively Increase Caries Susceptibility in A Mouse Model of Cleft Lip/Palate

Thesis (Ph.D.)--University of Washington, 2016-04