Avaliação de técnicas cromatográficas acopladas a espectrometria de massas para análise de morfolina em manga

A constante preocupação com o aumento do uso de agrotóxicos nas lavouras e os riscos gerados pelos resíduos destes compostos fazem com que os órgãos responsáveis pela fiscalização de alimentos no Brasil controlem a presença dessas substâncias nos produtos que chegam à mesa do consumidor. Atualmente, um dos grandes problemas na produção de alimentos é a utilização de substâncias proibidas em lavouras, muitas das quais não possuem estudos nem limites máximos de resíduos (LMR) estabelecidos, assim como a utilização de substâncias já registradas, mas em quantidades ou métodos de manejo incorretos. Ambos os casos podem resultar em sérios problemas à saúde humana. O objetivo deste estudo foi a avaliação da determinação de morfolina em amostras de manga utilizando técnicas como a Extração em Fase Sólida e a Cromatografia Gasosa acoplada à Espectrometria de Massas (SPE-GC-MS), assim como a Microextração em Sorvente Empacotado e Cromatografia Gasosa acoplada à Espectrometria de Massas (MEPS-GC-MS). Um segundo objetivo deste estudo consistiu em desenvolver, validar e avaliar uma metodologia analítica capaz de identificar quantitativamente a morfolina em amostras de manga por Cromatografia Líquida de Ultra Eficiência acoplada a Espectrometria de Massas em tandem (UHPLC-MS/MS). Para análise por GC-MS fez-se necessária a etapa de derivatização do analito, de forma que o mesmo aumentasse sua volatilidade e diminuísse a polaridade. A comparação entre as técnicas SPE e MEPS não foi possível devido ao efeito de matriz causado pela contaminação do liner e da coluna cromatográfica. Já a metodologia validada por UHPLC-MS/MS seguiu os critérios exigidos pelo Manual de Garantia da Qualidade Analítica, do Ministério da Agricultura Pecuária e Abastecimento (MAPA). O método foi aplicado em mangas de diferentes variedades obtidas no comércio local. Não foram encontrados resíduos de morfolina em nenhuma das amostras investigadas, de acordo com a metodologia proposta. Os resultados apresentados neste trabalho estabelecem metodologias eficientes, rápidas e de baixo custo na determinação de morfolina em amostras de manga.

Evaluation of the multi-element capabilities of collision/reaction cell inductively coupled plasma - mass spectrometry in wine analysis

This work explores the multi-element capabilities of inductively coupled plasma - mass spectrometry with collision/reaction cell technology (CCT-ICP-MS) for the simultaneous determination of both spectrally interfered and non-interfered nuclides in wine samples using a single set of experimental conditions. The influence of the cell gas type (i.e. He, He+H2 and He+NH3), cell gas flow rate and sample pre-treatment (i.e. water dilution or acid digestion) on the background-equivalent concentration (BEC) of several nuclides covering the mass range from 7 to 238 u has been studied. Results obtained in this work show that, operating the collision/reaction cell with a compromise cell gas flow rate (i.e. 4 mL min−1) improves BEC values for interfered nuclides without a significant effect on the BECs for non-interfered nuclides, with the exception of the light elements Li and Be. Among the different cell gas mixtures tested, the use of He or He+H2 is preferred over He+NH3 because NH3 generates new spectral interferences. No significant influence of the sample pre-treatment methodology (i.e. dilution or digestion) on the multi-element capabilities of CCT-ICP-MS in the context of simultaneous analysis of interfered and non-interfered nuclides was observed. Nonetheless, sample dilution should be kept at minimum to ensure that light nuclides (e.g. Li and Be) could be quantified in wine. Finally, a direct 5-fold aqueous dilution is recommended for the simultaneous trace and ultra-trace determination of spectrally interfered and non-interfered elements in wine by means of CCT-ICP-MS. The use of the CCT is mandatory for interference-free ultra-trace determination of Ti and Cr. Only Be could not be determined when using the CCT due to a deteriorated limit of detection when compared to conventional ICP-MS.

Non-spectral interferences due to the presence of sulfuric acid in inductively coupled plasma mass spectrometry

Results of a systematic study concerning non-spectral interferences from sulfuric acid containing matrices on a large number of elements in inductively coupled plasma–mass spectrometry (ICP-MS) are presented in this work. The signals obtained with sulfuric acid solutions of different concentrations (up to 5% w w− 1) have been compared with the corresponding signals for a 1% w w− 1− nitric acid solution at different experimental conditions (i.e., sample uptake rates, nebulizer gas flows and r.f. powers). The signals observed for 128Te+, 78Se+ and 75As+ were significantly higher when using sulfuric acid matrices (up to 2.2-fold for 128Te+ and 78Se+ and 1.8-fold for 75As+ in the presence of 5 w w-1 sulfuric acid) for the whole range of experimental conditions tested. This is in agreement with previously reported observations. The signal for 31P+ is also higher (1.1-fold) in the presence of sulfuric acid. The signal enhancements for 128Te+, 78Se+, 75As+ and 31P+ are explained in relation to an increase in the analyte ion population as a result of charge transfer reactions involving S+ species in the plasma. Theoretical data suggest that Os, Sb, Pt, Ir, Zn and Hg could also be involved in sulfur-based charge transfer reactions, but no experimental evidence has been found. The presence of sulfuric acid gives rise to lower ion signals (about 10–20% lower) for the other nuclides tested, thus indicating the negative matrix effect caused by changes in the amount of analyte loading of the plasma. The elemental composition of a certified low-density polyethylene sample (ERM-EC681K) was determined by ICP-MS after two different sample digestion procedures, one of them including sulfuric acid. Element concentrations were in agreement with the certified values, irrespective of the acids used for the digestion. These results demonstrate that the use of matrix-matched standards allows the accurate determination of the tested elements in a sulfuric acid matrix.

Method Development and Validation of Vitamin D2 and Vitamin D3 using Mass Spectrometry

Thesis (Master's)--University of Washington, 2016-06

Comparison of bioassay and high performance liquid chromatographic assay of artesunate and dihydroartemisinin in plasma

The study was a comparison of bioassay and HPLC analysis of artesunate (ARTS) and dihydroartemisinin (DHA) in plasma. ARTS and DHA in plasma samples from patients treated with ARTS were quantified by HPLC and expressed as DHA. DHA-equivalents in the same plasma samples were measured using a standardised parasite culture technique. DHA concentrations estimated by both methods were highly correlated (bioassay = 0.96 x HPLC + 11.0; r(2) = 0.92). At high concentrations ( > 12 000 nmol/l) bioassay sometimes overestimated DHA. Bioassay of active drug in plasma correlates well with specific chemical analysis by HPLC. ARTS and DHA appear to account for the total antimalarial activity in plasma after ARTS administration. (C) 2003 Elsevier Science B.V. All rights reserved.

High performance liquid level monitoring system based on polymer fiber Bragg gratings embedded in silicone rubber diaphragm

Liquid-level sensing technologies have attracted great prominence, because such measurements are essential to industrial applications, such as fuel storage, flood warning and in the biochemical industry. Traditional liquid level sensors are based on electromechanical techniques; however they suffer from intrinsic safety concerns in explosive environments. In recent years, given that optical fiber sensors have lots of well-established advantages such as high accuracy, costeffectiveness, compact size, and ease of multiplexing, several optical fiber liquid level sensors have been investigated which are based on different operating principles such as side-polishing the cladding and a portion of core, using a spiral side-emitting optical fiber or using silica fiber gratings. The present work proposes a novel and highly sensitive liquid level sensor making use of polymer optical fiber Bragg gratings (POFBGs). The key elements of the system are a set of POFBGs embedded in silicone rubber diaphragms. This is a new development building on the idea of determining liquid level by measuring the pressure at the bottom of a liquid container, however it has a number of critical advantages. The system features several FBG-based pressure sensors as described above placed at different depths. Any sensor above the surface of the liquid will read the same ambient pressure. Sensors below the surface of the liquid will read pressures that increase linearly with depth. The position of the liquid surface can therefore be approximately identified as lying between the first sensor to read an above-ambient pressure and the next higher sensor. This level of precision would not in general be sufficient for most liquid level monitoring applications; however a much more precise determination of liquid level can be made by linear regression to the pressure readings from the sub-surface sensors. There are numerous advantages to this multi-sensor approach. First, the use of linear regression using multiple sensors is inherently more accurate than using a single pressure reading to estimate depth. Second, common mode temperature induced wavelength shifts in the individual sensors are automatically compensated. Thirdly, temperature induced changes in the sensor pressure sensitivity are also compensated. Fourthly, the approach provides the possibility to detect and compensate for malfunctioning sensors. Finally, the system is immune to changes in the density of the monitored fluid and even to changes in the effective force of gravity, as might be obtained in an aerospace application. The performance of an individual sensor was characterized and displays a sensitivity (54 pm/cm), enhanced by more than a factor of 2 when compared to a sensor head configuration based on a silica FBG published in the literature, resulting from the much lower elastic modulus of POF. Furthermore, the temperature/humidity behavior and measurement resolution were also studied in detail. The proposed configuration also displays a highly linear response, high resolution and good repeatability. The results suggest the new configuration can be a useful tool in many different applications, such as aircraft fuel monitoring, and biochemical and environmental sensing, where accuracy and stability are fundamental. © (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.

Elemental analysis of glass and ink by laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) and laser induced breakdown spectroscopy (LIBS)

The necessity of elemental analysis techniques to solve forensic problems continues to expand as the samples collected from crime scenes grow in complexity. Laser ablation ICP-MS (LA-ICP-MS) has been shown to provide a high degree of discrimination between samples that originate from different sources. In the first part of this research, two laser ablation ICP-MS systems were compared, one using a nanosecond laser and another a femtosecond laser source for the forensic analysis of glass. The results showed that femtosecond LA-ICP-MS did not provide significant improvements in terms of accuracy, precision and discrimination, however femtosecond LA-ICP-MS did provide lower detection limits. In addition, it was determined that even for femtosecond LA-ICP-MS an internal standard should be utilized to obtain accurate analytical results for glass analyses. In the second part, a method using laser induced breakdown spectroscopy (LIBS) for the forensic analysis of glass was shown to provide excellent discrimination for a glass set consisting of 41 automotive fragments. The discrimination power was compared to two of the leading elemental analysis techniques, μXRF and LA-ICP-MS, and the results were similar; all methods generated >99% discrimination and the pairs found indistinguishable were similar. An extensive data analysis approach for LIBS glass analyses was developed to minimize Type I and II errors en route to a recommendation of 10 ratios to be used for glass comparisons. Finally, a LA-ICP-MS method for the qualitative analysis and discrimination of gel ink sources was developed and tested for a set of ink samples. In the first discrimination study, qualitative analysis was used to obtain 95.6% discrimination for a blind study consisting of 45 black gel ink samples provided by the United States Secret Service. A 0.4% false exclusion (Type I) error rate and a 3.9% false inclusion (Type II) error rate was obtained for this discrimination study. In the second discrimination study, 99% discrimination power was achieved for a black gel ink pen set consisting of 24 self collected samples. The two pairs found to be indistinguishable came from the same source of origin (the same manufacturer and type of pen purchased in different locations). It was also found that gel ink from the same pen, regardless of the age, was indistinguishable as were gel ink pens (four pens) originating from the same pack.

Elemental Analysis of Glass and Ink by Laser Ablation Inductively Coupled Plasma Mass Spectrometry (LA-ICP-MS) and Laser Induced Breakdown Spectroscopy (LIBS)

The necessity of elemental analysis techniques to solve forensic problems continues to expand as the samples collected from crime scenes grow in complexity. Laser ablation ICP-MS (LA-ICP-MS) has been shown to provide a high degree of discrimination between samples that originate from different sources. In the first part of this research, two laser ablation ICP-MS systems were compared, one using a nanosecond laser and another a femtosecond laser source for the forensic analysis of glass. The results showed that femtosecond LA-ICP-MS did not provide significant improvements in terms of accuracy, precision and discrimination, however femtosecond LA-ICP-MS did provide lower detection limits. In addition, it was determined that even for femtosecond LA-ICP-MS an internal standard should be utilized to obtain accurate analytical results for glass analyses. In the second part, a method using laser induced breakdown spectroscopy (LIBS) for the forensic analysis of glass was shown to provide excellent discrimination for a glass set consisting of 41 automotive fragments. The discrimination power was compared to two of the leading elemental analysis techniques, µXRF and LA-ICP-MS, and the results were similar; all methods generated >99% discrimination and the pairs found indistinguishable were similar. An extensive data analysis approach for LIBS glass analyses was developed to minimize Type I and II errors en route to a recommendation of 10 ratios to be used for glass comparisons. Finally, a LA-ICP-MS method for the qualitative analysis and discrimination of gel ink sources was developed and tested for a set of ink samples. In the first discrimination study, qualitative analysis was used to obtain 95.6% discrimination for a blind study consisting of 45 black gel ink samples provided by the United States Secret Service. A 0.4% false exclusion (Type I) error rate and a 3.9% false inclusion (Type II) error rate was obtained for this discrimination study. In the second discrimination study, 99% discrimination power was achieved for a black gel ink pen set consisting of 24 self collected samples. The two pairs found to be indistinguishable came from the same source of origin (the same manufacturer and type of pen purchased in different locations). It was also found that gel ink from the same pen, regardless of the age, was indistinguishable as were gel ink pens (four pens) originating from the same pack.

(Table 1) TOC content, BIT, TEX86 and UK'37 indices, and sea surface temperature reconstruction for the middle Miocene to Pliocene of ODP Hole 175-1085A

The initiation of the Benguela upwelling has been dated to the late Miocene, but estimates of its sea surface temperature evolution are not available. This study presents data from Ocean Drilling Program (ODP) Site 1085 recovered from the southern Cape Basin. Samples of the middle Miocene to Pliocene were analyzed for alkenone-based (UK'37, SSTUK) and glycerol dialkyl glycerol tetraether (GDGT) based (TEX86, TempTEX) water temperature proxies. In concordance with global cooling during the Miocene, SSTUK and TempTEX exhibit a decline of about 8°C and 16°C, respectively. The temperature trends suggest an inflow of cold Antarctic waters triggered by Antarctic ice sheet expansion and intensification of Southern Hemisphere southeasterly winds. A temperature offset between both proxies developed with the onset of upwelling, which can be explained by differences in habitat: alkenone-producing phytoplankton live in the euphotic zone and record sea surface temperatures, while GDGT-producing Thaumarchaeota are displaced to colder subsurface waters in upwelling-influenced areas and record subsurface water temperatures. We suggest that variations in subsurface water temperatures were driven by advection of cold Antarctic waters and thermocline adjustments that were due to changes in North Atlantic deep water formation. A decline in surface temperatures, an increased offset between temperature proxies, and an increase in primary productivity suggest the establishment of the Benguela upwelling at 10 Ma. During the Messinian Salinity Crisis, between 7 and 5 Ma, surface and subsurface temperature estimates became similar, likely because of a strong reduction in Atlantic overturning circulation, while high total organic carbon contents suggest a "biogenic bloom." In the Pliocene the offset between the temperature estimates and the cooling trend was reestablished.

Desenvolvimento e validação de metodologia analítica para a determinação de fármacos em amostyras de água, superficial e tratada, utilizando a cromatografia líquida de ultra performance acoplada a espectrometria de massas tandem (UPLC-MS/MS)

Dissertação (Mestrado)

Chemical composition of Boletus pinophilus and Clitocybe subconnexa: preservation with gamma irradiation

The short shelf life of mushrooms is a barrier for their distribution and, therefore, there has been extensive research to find technologies that ensure the preservation of mushrooms, maintaining their organoleptic and nutritional properties (1]. Irradiation has proved its technological feasibility to be safely used in the reduction of food losses, being recognized by international organizations as a valid conservation alternative in extending shelflife of many foods. The aim of the present work was to validate the use of 2 kGy dose of gamma radiation to maintain chemical composition of wild mushrooms. Boletus pinophilus Pihit & Dermek and Clitocybe subconnexa Murrill wild samples were obtained in Tnis-os-Montes; subsequently, the samples were divided in two groups: control (non-irradiated, 0 kGy) and irradiated (2 kGy). The irradiation of the samples was performed in a 6°Co experimental chamber. Moisture, protein, fat, carbohydrates and ash were determined following the standard procedures [2]. Free sugars and tocopherols were determined by high performance liquid chromatography coupled to a refraction index detector (HPLC-RI) and a fluorescence detector, respectively; fatty acids were determined by gas-liquid chromatography with flame ionization detection (GC-FID) [3]. The protein and ash content was preserved in both groups, although the sugars and tocopherols decreased in the irradiated samples. Sugars and fatty acids showed significant changes after irradiation treatment, particularly in B. pinophillus, nevertheless, the magnitude of the obtained differences did not seem to be sufficient to affect the chemical profiles of the assayed mushrooms. Overall, the detected chemical changes might be considered as allowable, in view of the high advantages offered by gamma irradiation at decontamination and/or disinfestation level.

Phenolic composition of four sage species: salvia farinacea, salvia mexico, salvia greggii and salvia officinalis

Salvia species are used worldwide for medicine purposes. In general, these medicinal plants have high amounts of flavonoids and phenolic acids, that are thought to be closely related to their health properties [1,2]. In this work, the aerial parts of Salvia farinacea, Salvia mexico, Salvia greggii and Salvia officinalis were extracted with hot water [3]. Extracts were evaluated for their total phenolic content by an adaptation of the Folin-Ciocalteu method and further analysed by high performance liquid chromatography associated with electrospray mass spectrometry (HPLC-DAD-ESI-MSn) in the negative ion mode [4], in order to identify their individual phenolic constituents. The aqueous extracts of S. farinacea, S. mexico, S. officinalis and S. greggii contained, respectively, 106±13, 159±38, 175±46 and 136±1 μg GAE/mg of total phenolics. These four species were characterized by a clear prevalence of caffeic acid derivatives, in particular of rosmarinic acid (MW 360), that is generally the most abundant phenolic compound in Salvia species [2,3]. In addition, S. mexico and S. officinalis contained moderate amounts of salvianolic acid B (MW 718). Among these two, S. mexico was richer in O-caffeoylquinic acid (MW 354), while the latter presented high amounts of salvianolic acid K (MW 556) and moderate amounts of its structural isomer. All the extracts were enriched in flavones: S. farinacea and S. officinalis contained high amounts of luteolin-O-glucuronide while S. mexico contained luteolin-C-glucoside with respective characteristic mass spectrometry fragmentation pattern m/z at 461→285 and m/z at 447→357, 327. Similarly, S. greggii extract presented high content of luteolin-7-O-glucoside ([M-H]− at m/z 447→ 285) and luteolin-C-glucoside and moderate quantities of apigenin-C-hexoside ([M-H]− at m/z 431→341, 311). Further studies are being undertaken in order to understand the contribution of these phenolic constituents in the biological activities of Salvia plants.

Phenolic composition of four sage species: salvia farinacea, salvia mexico, salvia greggii and salvia officinalis

Salvia species are used worldwide for medicine purposes. In general, these medicinal plants have high amounts of flavonoids and phenolic acids, that are thought to be closely related to their health properties [1,2]. In this work, the aerial parts of Salvia farinacea, Salvia mexico, Salvia greggii and Salvia officinalis were extracted with hot water [3]. Extracts were evaluated for their total phenolic content by an adaptation of the Folin-Ciocalteu method and further analysed by high performance liquid chromatography associated with electrospray mass spectrometry (HPLC-DAD-ESI-MSn) in the negative ion mode [4], in order to identify their individual phenolic constituents. The aqueous extracts of S. farinacea, S. mexico, S. officinalis and S. greggii contained, respectively, 106±13, 159±38, 175±46 and 136±1 μg GAE/mg of total phenolics. These four species were characterized by a clear prevalence of caffeic acid derivatives, in particular of rosmarinic acid (MW 360), that is generally the most abundant phenolic compound in Salvia species [2,3]. In addition, S. mexico and S. officinalis contained moderate amounts of salvianolic acid B (MW 718). Among these two, S. mexico was richer in O-caffeoylquinic acid (MW 354), while the latter presented high amounts of salvianolic acid K (MW 556) and moderate amounts of its structural isomer. All the extracts were enriched in flavones: S. farinacea and S. officinalis contained high amounts of luteolin-O-glucuronide while S. mexico contained luteolin-C-glucoside with respective characteristic mass spectrometry fragmentation pattern m/z at 461→285 and m/z at 447→357, 327. Similarly, S. greggii extract presented high content of luteolin-7-O-glucoside ([M-H]− at m/z 447→ 285) and luteolin-C-glucoside and moderate quantities of apigenin-C-hexoside ([M-H]− at m/z 431→341, 311). Further studies are being undertaken in order to understand the contribution of these phenolic constituents in the biological activities of Salvia plants.

Phenolic compounds and antioxidant capacity of three thymus species plants

Thymus plants comprise distinct species with claimed health properties [1], commonly associated to their essential oils and phenolic compounds. Albeit that, the phenolic composition and the biological activities of many Thymus species remain unclear. This work aimed to elucidate the phenolic composition and antioxidant properties of aqueous extracts from Thymus herba barona, Thymus caespetitus and Thymus fragrantissimus. The aqueous extracts of the three Thymus species were evaluated for their total phenolic compounds by an adaptation of the Folin-Ciocalteu method [2], and individual phenolic compounds were identified by high performance liquid chromatography associated with electrospray mass spectrometry (HPLC-DAD-ESI-MSn) in the negative mode. The antioxidant activity of each extract was carried out by DPPH● scavenging assay and ferric reducing antioxidant power assays [3]. Total phenolic compounds in the three extracts ranged from 236±27 (T. caespetitus) to 273±17 μg GAE/mg (T. fragrantissimus). Similarly to other Thymus species [1,4], these extracts were rich in caffeic acid derivatives (characteristic UV spectra maxima at 290 and 328 nm) and mainly composed of rosmarinic acid (MW 360). Other caffeic acid derivatives included salvianolic acid K (MW 556) and 3′-O-(8″-Z-caffeoyl)rosmarinic acid (MW 538). High amounts of the flavone luteolin-O-glucuronide ([M-H]− at m/z 461→285) were found in T. caespetitus while the others species contained moderate amounts of this compound. T. herba barona, T. caespetitus and T. fragrantissimus extracts showed high DPPH radical scavenge ability (EC50 values 11.6±0.9, 13.8±0.6 and 10.9±1.2 μg/mL respectively), as well as high reducing power (EC50 values of 35.1±4.5, 39.3±2.7 and 32.4±4.3 μg/mL, respectively), that were comparable to those of reference compounds. This work is an important contribution for the phytochemical characterization and the antioxidant capacity of these three Thymus species.

Phenolic compounds and antioxidant capacity of three thymus species plants

Thymus plants comprise distinct species with claimed health properties [1], commonly associated to their essential oils and phenolic compounds. Albeit that, the phenolic composition and the biological activities of many Thymus species remain unclear. This work aimed to elucidate the phenolic composition and antioxidant properties of aqueous extracts from Thymus herba barona, Thymus caespetitus and Thymus fragrantissimus. The aqueous extracts of the three Thymus species were evaluated for their total phenolic compounds by an adaptation of the Folin-Ciocalteu method [2], and individual phenolic compounds were identified by high performance liquid chromatography associated with electrospray mass spectrometry (HPLC-DAD-ESI-MSn) in the negative mode. The antioxidant activity of each extract was carried out by DPPH● scavenging assay and ferric reducing antioxidant power assays [3]. Total phenolic compounds in the three extracts ranged from 236±27 (T. caespetitus) to 273±17 μg GAE/mg (T. fragrantissimus). Similarly to other Thymus species [1,4], these extracts were rich in caffeic acid derivatives (characteristic UV spectra maxima at 290 and 328 nm) and mainly composed of rosmarinic acid (MW 360). Other caffeic acid derivatives included salvianolic acid K (MW 556) and 3′-O-(8″-Z-caffeoyl)rosmarinic acid (MW 538). High amounts of the flavone luteolin-O-glucuronide ([M-H]− at m/z 461→285) were found in T. caespetitus while the others species contained moderate amounts of this compound. T. herba barona, T. caespetitus and T. fragrantissimus extracts showed high DPPH radical scavenge ability (EC50 values 11.6±0.9, 13.8±0.6 and 10.9±1.2 μg/mL respectively), as well as high reducing power (EC50 values of 35.1±4.5, 39.3±2.7 and 32.4±4.3 μg/mL, respectively), that were comparable to those of reference compounds. This work is an important contribution for the phytochemical characterization and the antioxidant capacity of these three Thymus species.