913 resultados para Gross morphology
Resumo:
Référence bibliographique : Rol, 59327
Resumo:
Commençant par : « Les fais des anciens doit l'on voulontiers lire... » et finissant par : «... et trouvay escript au dessoubz : C'est le livre et histoire royal. Le present livre fut grossé... en la ville de Sesdin, par David Aubert, l'an de l'Incarnation N. S. J. C. 1463 » .
Resumo:
House Finches (CarpQdacqs mexiCAnuS) were introduced to Long Island, New York from southern'California in 1940. Apparently, an initial sample of less than 100 birds has given rise to a population that now occupies much of the eastern United States. This study was to determine if morphological and reproductive changes have taken place in introduced eastern birds, which have colonized a novel environment. A study area in Goleta, California (CAL) represented the parental population whereas for comparison, House Finches in St. Catharines, Ontario (ONT) represented the introduced population. Interlocality variation in 25 morphometric characters of 100 adult House Finches was examined statistically. Singleclassification analysis of variance revealed significant interlocality differentiation in seven characters of males and nine of females. Females showed differentiation in more limb elements than males. Analysis of character variation using discriminant and principal component analysis distinguished samples on the basis of variation in shape. Compared to CAL, aNT birds (especially females) had smaller extremities relative to certain core parts and weight. Females showed similar patterns of character covariation in each locality on the second principal component, which suggests that differentiation of the ONT population may not be solely environmentally induced. Sexual dimorphism was evident in four charaoters in aNT and five in CAL. Disoriminant analysis distinguished sex on the basis of variation in shape. Males possessed a relatively larger flying apparatus and small.er hind limbs than females. The dearee of sexual dimorphism did not vary sicnifioantly between looalities. 3 Data on reproduotive parameters were oolleoted in 1983 and 1984 in ONT, and 1984 in CAL. In 1984, Bouse Finohes began breedina approximately three months earlier in CAL than in ONT. In ONT, there was no sianifioant differenoe in mean olutoh initiation date between 1983 and 1984. In both looalities most nests oontained either four or five ea",s, and olutoh size differenoes between looalites were not signifioant. Seasonal deolines in olutch size were evident in ONT but not in CAL. Intralooality variation in e.g weight and size was not related to clutch size. E",g weiaht showed no seasonal trend in ONT, but inoreased sianifioantly with breed ina season in OAL. In both looalities e8'''' weiaht increased sipifioantly with order of layina in olutohes of four but not in clutohes of five. Eag's in ONT in 1983 and 1984 were sip.ificantly larser than in CAL in 1984. The modal inoubation period was 13 days and did not vary sip.ifioantly between localites. In both looalities nestling weiaht on the day of hatohing was oorrelated to fresh ega welaht. For muoh of the period between hatohing and 14 days post-hatoh, ONT nestlinas were signifioantly laraer than CAL nestlings in terms of weiaht. bill length, bill depth, and manus length.
Resumo:
Cette thèse examine les impacts sur la morphologie des tributaires du fleuve Saint-Laurent des changements dans leur débit et leur niveau de base engendrés par les changements climatiques prévus pour la période 2010–2099. Les tributaires sélectionnés (rivières Batiscan, Richelieu, Saint-Maurice, Saint-François et Yamachiche) ont été choisis en raison de leurs différences de taille, de débit et de contexte morphologique. Non seulement ces tributaires subissent-ils un régime hydrologique modifié en raison des changements climatiques, mais leur niveau de base (niveau d’eau du fleuve Saint-Laurent) sera aussi affecté. Le modèle morphodynamique en une dimension (1D) SEDROUT, à l’origine développé pour des rivières graveleuses en mode d’aggradation, a été adapté pour le contexte spécifique des tributaires des basses-terres du Saint-Laurent afin de simuler des rivières sablonneuses avec un débit quotidien variable et des fluctuations du niveau d’eau à l’aval. Un module pour simuler le partage des sédiments autour d’îles a aussi été ajouté au modèle. Le modèle ainsi amélioré (SEDROUT4-M), qui a été testé à l’aide de simulations à petite échelle et avec les conditions actuelles d’écoulement et de transport de sédiments dans quatre tributaires du fleuve Saint-Laurent, peut maintenant simuler une gamme de problèmes morphodynamiques de rivières. Les changements d’élévation du lit et d’apport en sédiments au fleuve Saint-Laurent pour la période 2010–2099 ont été simulés avec SEDROUT4-M pour les rivières Batiscan, Richelieu et Saint-François pour toutes les combinaisons de sept régimes hydrologiques (conditions actuelles et celles prédites par trois modèles de climat globaux (MCG) et deux scénarios de gaz à effet de serre) et de trois scénarios de changements du niveau de base du fleuve Saint-Laurent (aucun changement, baisse graduelle, baisse abrupte). Les impacts sur l’apport de sédiments et l’élévation du lit diffèrent entre les MCG et semblent reliés au statut des cours d’eau (selon qu’ils soient en état d’aggradation, de dégradation ou d’équilibre), ce qui illustre l’importance d’examiner plusieurs rivières avec différents modèles climatiques afin d’établir des tendances dans les effets des changements climatiques. Malgré le fait que le débit journalier moyen et le débit annuel moyen demeurent près de leur valeur actuelle dans les trois scénarios de MCG, des changements importants dans les taux de transport de sédiments simulés pour chaque tributaire sont observés. Ceci est dû à l’impact important de fortes crues plus fréquentes dans un climat futur de même qu’à l’arrivée plus hâtive de la crue printanière, ce qui résulte en une variabilité accrue dans les taux de transport en charge de fond. Certaines complications avec l’approche de modélisation en 1D pour représenter la géométrie complexe des rivières Saint-Maurice et Saint-François suggèrent qu’une approche bi-dimensionnelle (2D) devrait être sérieusement considérée afin de simuler de façon plus exacte la répartition des débits aux bifurcations autour des îles. La rivière Saint-François est utilisée comme étude de cas pour le modèle 2D H2D2, qui performe bien d’un point de vue hydraulique, mais qui requiert des ajustements pour être en mesure de pleinement simuler les ajustements morphologiques des cours d’eau.
Resumo:
L’ubiquitin-fold modifier (UFM1) fait partie de la classe 1 de la famille de protéine ubiquitin-like (Ubl). UFM1 et Ub ont très peu d’homologie de séquence, mais partagent des similarités remarquables au niveau de leur structure tertiaire. Tout comme l’Ub et la majorité des autres Ubls, UFM1 se lie de façon covalente à ses substrats par l’intermédiaire d’une cascade enzymatique. Il est de plus en plus fréquemment rapporté que les protéines Ubls sont impliquées dans des maladies humaines. Le gène Ufm1 est surexprimé chez des souris de type MCP développant une ischémie myocardique et dans les îlots de Langerhans de patients atteints du diabète de type 2. UFM1 et ses enzymes spécifiques, UBA5, UFL1 et UFC1, sont conservés chez les métazoaires et les plantes suggérant un rôle important pour les organismes multicellulaires. Le Caenorhabditis elegans est le modèle animal le plus simple utilisé en biologie. Sa morphologie, ses phénotypes visibles et ses lignées cellulaires ont été décrits de façon détaillée. De plus, son cycle de vie court permet de rapidement observer les effets de certains gènes sur la longévité. Ce modèle nous permet de facilement manipuler l’expression du gène Ufm1 et de mieux connaître ses fonctions. En diminuant l’expression du gène ufm-1 chez le C.elegans, par la technique de l’ARN interférence par alimentation, nous n’avons observé aucun problème morphologique grave. Les vers ressemblaient aux vers sauvages et possédaient un nombre de progéniture normal. Cependant, les vers sauvage exposés à l’ARNi d’ufm-1 vivent significativement moins longtemps que les contrôles et ce, de façon indépendante de la voie de signalisation de l’insuline/IGF. Chez le C. elegans la longévité et la résistance au stress cellulaire sont intimement liées. Nous n’avons remarqué aucun effet d’ufm-1 sur le stress thermal, osmotique ou oxydatif, mais il est requis pour la protection contre le stress protéotoxique. Il est également nécessaire au maintien de l’intégrité neuronale au cours du vieillissement des animaux. L’ensemble de nos données nous renseigne sur les fonctions putatives du gène Ufm1.
Resumo:
Ce mémoire présente une étude de la morphologie de ce qui est généralement appelé le pluriel nominal du persan (parler de Téhéran) dans le cadre d’une théorie de la morphologie basée sur le mot : Whole Word Morphology, développée par Ford et Singh (1991). Ce modèle lexicaliste adopte une position plus forte que les modèles proposés par Aronoff (1976) et Anderson (1992) en n’admettant aucune opération morphologique sur des unités plus petites que le mot. Selon cette théorie, une description morphologique consiste en l’énumération des Stratégies de Formation de Mots (SFM), licencées chacunes par au moins deux paires de mots ayant la même covariation formelle et sémantique. Tous les SFM suit le même schéma. Nous avons répertorié 49 SFM regroupant les pluriels et les collectifs. Nous constatons qu’il est difficile de saisir le pluriel nominal du persan en tant que catégorie syntaxique et que les différentes « marques du pluriel » présentées dans la littérature ne constituent pas un ensemble homogène : elles partagent toutes un sens de pluralité qui cependant varie d’une interprétation référentielle à une interprétation collective non-référentielle. Cette étude vise la déscription de la compétence morphologique, ce qui ne dépend d’aucune considération extralinguistique. Nous argumentons notamment contre la dichotomie arabe/persan généralement admise dans la littérature. Nous avons également fourni des explications quant à la production des pluriels doubles et avons discuté de la variation supposée du fait d’un choix multiple de « marques du pluriel ».
Resumo:
Thèse numérisée par la Division de la gestion de documents et des archives de l'Université de Montréal
Resumo:
Thèse numérisée par la Division de la gestion de documents et des archives de l'Université de Montréal.
Resumo:
A detailed study of the blends of ethylene-propylene-diene rubber (EPDM) and chlorobutyl rubber (CIIR) is proposed in this study. These blends may find application in the manufacture of curing diaphragms/curing envelopes for tire curing applications. EPDM possesses better physical properties such as high heat resistance, ozone resistance, cold and moisture resistance, high resistance to permanent defonnation, very good resistance to flex cracking and impact. Because of the low gas and moisture penneability, good weathering resistance and high thermal stability of CIIR, blends of EPDM with CIlR may be attractive, if sufficient mechanical strength can be developed. Although a lot of work has been done on elastomer blends, studies on the blends of EPDM and CIIR rubbers are meagre. Hence in this investigation it is proposed to make a systematic study on the characteristics of EPDM and CIIR rubber blends.The mechanical and physical properties of an elastomer blend depend mainly on the blend compatibility. So in the first part of the study, it is proposed to develop compatible blends of EPDM with CIIR. Various commercial grades of ethylenepropylene- diene rubber are proposed to be blended with a specific grade of chlorobutyl rubber at varying proportions. The extent of compatibility in these blends is proposed to be evaluated based on their mechanical properties such as tensile strength, tear strength and ageing resistance. In addition to the physical property measurements, blend compatibility is also proposed to be studied based on the glass transition behavlour of the blends in relation to the Tg's of the individual components using Differential Scanning Calorimetry (DSC) and Dynamic Mechanical Analysis (DMA). The phase morphology of the blends is also proposed to be investigated by Scanning Electron Microscopy (SEM) studies of the tensile fracture surfaces. In the case of incompatible blends, the effect of addition of chlorosulfonated polyethylene as a compatibiliser is also proposed to be investigated.In the second part of the study, the effect of sulphur curing and resin curing on the curing behaviour and the vulcanizate properties of EPDM/CIIR blends are planned to be evaluated. Since the properties of rubber vulcanizates are determined by their network structures, it is proposed to determine the network structure of the vulcanizates by chemical probes so as to correlate it with the mechanical properties.In the third part of the work, the effect of partial precuring of one of the components prior to blending as a possible means of improving the properties of the blend is proposed to be investigated. This procedure may also help to bring down the viscosity mismatch between the constituent e1astomers and provide covulcanization of the blend.The rheological characteristics and processability of the blends are proposed to be investigated in the last part of the study. To explore their possible applications, the air permeability of the blend samples at varying temperatures is proposed to be measured. The thermal diffusivity behaviour of EPDM/CIlR blends is also proposed to be investigated using novel laser technique. The thermal diffusivity of the blends along with the thermal degradation resistance may help to determine whether the blends are suitable for high temperature applications such as in the manufacturing of curing envelope.
Resumo:
The focus of this paper is to develop computationally efficient mathematical morphology operators on hypergraphs. To this aim we consider lattice structures on hypergraphs on which we build morphological operators. We develop a pair of dual adjunctions between the vertex set and the hyperedge set of a hypergraph , by defining a vertex-hyperedge correspondence. This allows us to recover the classical notion of a dilation/erosion of a subset of vertices and to extend it to subhypergraphs of . This paper also studies the concept of morphological adjunction on hypergraphs for which both the input and the output are hypergraphs
Resumo:
Die vorliegende Arbeit stellt eine umfassende taxonomische Revision der Gattung Fosterella L.B. Sm. (Bromeliaceae) dar, die alle 31 derzeit akzeptierten Arten umfasst und einen Bestimmungsschlüssel für diese beinhaltet. Die Revision beruht auf der morphologisch-anatomischen Auswertung von Herbarmaterial (über 800 Exsikkate), Lebendpflanzen (ca. 150 Akzessionen) und eigenen vergleichenden Untersuchungen im Freiland. Die Gattung Fosterella ist seit nunmehr etlichen Jahren Forschungsgegenstand einer interdisziplinären Studie, die sowohl molekulrae, als auch anatomische, morphologische und biogeographische Untersuchungen einbezieht. Unser Interesse an der Gattung Fosterella gründet sich auf ihrer enormen ökologischen und biogeographischen Vielfalt, sie gilt als hervorragendes Modellsystem für Artbildungsmechanismen in den Anden. In den letzten Jahren wurde von verschiedenen molekularen Methoden Gebrauch gemacht, um die verwandtschaftlichen Beziehungen innerhalb der Gattung zu untersuchen, so dass mittlerweile gut aufgelöste Stammbäume vorliegen. Diese molekularen Studien, überwiegend durchgeführt von Dr. Martina Rex, wurden ergänzt durch intensive Sammelaktivitäten und eingehende taxonomische Untersuchungen im Rahmen der vorliegenden Revision. Auf diese Weise konnten die morphologische Plastizität der einzelnen Arten erfasst und schließlich ein wohlfundiertes Artkonzept vorgelegt werden. Zunächst wird ein kurzer Überblick über die Familie der Bromeliaceen als auch die Gattung Fosterella gegeben, in dem jeweils Informationen zur Verbreitung, Morphologie, Physiologie, Ökologie und Phylogenie geliefert werden. Im Anschluss an einen historischen Überblick des taxonomischen Werdegangs wird die Abgrenzung der Gattung Fosterella zu den nächstverwandten Gattungen Deuterocohnia, Dyckia und Encholirium erläutert. Die morphologischen Merkmale zur Differenzierung der Arten innerhalb der Gattung werden im Hinblick auf ihre Zuverlässigkeit und ihr Gewicht diskutiert. Der Artschlüssel basiert auf Merkmalen, die leicht auszumachen und gut zu unterscheiden sind. Bei der ausführlichen Beschreibung der Arten wird auch auf ihre jeweilige Verbreitung, Ökologie, taxonomische Abgrenzung, systematische Verwandtschaft sowie die Etymologie des Namens eingegangen. Beigefügt sind jeweils Zeichnungen, ein Foto vom Holo-/Lectotypus, Fotos von Lebendpflanzen sowie eine Verbreitungskarte. Im Rahmen der taxonomischen Arbeit wurden fünf Arten zu Synonymen reduziert: Fosterella chiquitana Ibisch, R. Vásquez & E. Gross und F. latifolia Ibisch, R. Vásquez & E. Gross wurden in die Synonymie von F. penduliflora (C.H. Wright) L.B. Sm. eingezogen; F. fuentesii Ibisch, R. Vásquez & E. Gross als Synonym zu F. albicans (Griseb.) L.B. Sm. gestellt; F. elata H. Luther in die Synonymie von F. rusbyi (Mez) L.B. Sm. verwiesen und F. nowickii Ibisch, R. Vásquez & E. Gross als Synonym zu F. weddelliana (Brongn. ex Baker) L.B. Sm. gestellt. Fosterella schidosperma (Baker) L.B. Sm. var. vestita L.B. Sm. & Read wird zum Synonym von Fosterella weberbaueri (Mez) L.B. Sm. reduziert. Sechs Arten wurden neu beschrieben: Fosterella batistana Ibisch, Leme & J. Peters; F. christophii Ibisch, R. Vásquez & J. Peters; F. elviragrossiae Ibisch, R. Vásquez & J. Peters; F. kroemeri Ibisch, R. Vásquez & J. Peters; F. nicoliana J. Peters & Ibisch und F. robertreadii Ibisch & J. Peters. Das Taxon F. gracilis (Rusby) L.B. Sm. wurde neu etabliert. Um die Evolution von einzelnen morphologischen Merkmalen zu rekonstruieren, wurden die Zustände von zehn ausgewählten Merkmalen kodiert und auf einen molekularen Stammbaum kartiert. Die folgenden Merkmalszustände wurden als ursprünglich innerhalb der Gattung ermittelt: Stammlosigkeit, ganzrandige Blattspreiten, flache Rosetten mit dem Boden aufliegenden Blättern, locker beschuppte Blattunterseiten, schildförmige Haare mit gezähntem Rand, ganzrandige Pedunkel-Brakteen, rispenförmiger Blütenstand, kahle/verkahlende Blütenstandsachsen, weiße Petalen und einfach-aufrechte Narben. Rückschlüsse bezüglich der Evolution und Ausbreitung der Gattung Fosterella werden diskutiert: Die überwiegend kleinen Verbreitungsgebiete der Arten hängen offensichtlich mit ihren fragmentierten, inselartigen Habitaten (z.B. innerandine Trockentäler) zusammen. Die Tatsache, dass die Yungas-Bergregenwälder des Departamento La Paz, Bolivia, die Region mit der größten Artenvielfalt darstellen, lässt sich mit der extrem variablen Topographie und der außerordentlich hohen Vielfalt an Habitaten dieser Region erklären. Aus folgenden Gründen erscheint es sehr wahrscheinlich, dass die Gattung Fosterella ihren Ursprung im Tiefland hat: Die Mehrheit der Arten weist einen eher mesophytischen Habitus auf und ist in mehr oder weniger humiden Habitaten zu finden. Die Gattung ist durch mehrere Arten in sehr alten Habitaten des präkambrischen Schilds im Tiefland von Zentral-Südamerika vertreten. Weiterhin betreiben, soweit bekannt, alle Fosterella Arten C3 Photosynthese, während in den Gattungen der Schwestergruppe, Deuterocohnia, Dyckia and Encholirium, CAM der verbreitete Photosyntheseweg ist. In jedem Fall ist die Besiedelung der Anden und/oder Tieflandhabitate mehrfach unabhängig voneinander geschehen, vielleicht sogar in beiden Richtungen.
Resumo:
Reproductive morphology of the Mediterranean red alga Kallymenia patens is described for the first time, confirming its position in the genus. K. patens is characterized by a non-procarpic female reproductive apparatus, carpogonial branch systems consisting of supporting cells bearing both three-celled carpogonial branches and subsidiary cells that lack a hypogynous cell and carpogonium; fusion cells develop numerous connecting filaments, and tetrasporangia are scattered over the thallus and are probably cruciately divided. Old fertile spathulate specimens of K. patens are morphologically similar to K. spathulata, but they can be distinguished by the length of spathulated proliferations (up to 0.6 cm and 6 cm, respectively), the length of inner cortical cells (up to 70 and 30 μm, respectively), and the gonimoblast location (in proliferations from the perennial part of the blade and over all the thallus surface, respectively)