Using green fluorescent protein to understand the mechanisms of G-protein-coupled receptor regulation

G protein-coupled receptor (GPCR) activation is followed rapidly by adaptive changes that serve to diminish the responsiveness of a cell to further stimulation. This process, termed desensitization, is the consequence of receptor phosphorylation, arrestin binding, sequestration and down-regulation. GPCR phosphorylation is initiated within seconds to minutes of receptor activation and is mediated by both second messenger-dependent protein kinases and receptor-specific G protein-coupled receptor kinases (GRKs). Desensitization in response to GRK-mediated phosphorylation involves the binding of arrestin proteins that serve to sterically uncouple the receptor from its G protein. GPCR sequestration, the endocytosis of receptors to endosomes, not only contributes to the temporal desensitization of GPCRs, but plays a critical role in GPCR resensitization. GPCR down-regulation, a loss of the total cellular complement of receptors, is the consequence of both increased lysosomal degradation and decreased mRNA synthesis of GPCRs. While each of these agonist-mediated desensitization processes are initiated within a temporally dissociable time frame, recent data suggest that they are intimately related to one another. The use of green fluorescent protein from the jellyfish Aqueora victoria as an epitope tag with intrinsic fluorescence has facilitated our understanding of the relative relationship between GRK phosphorylation, arrestin binding, receptor sequestration and down-regulation.

Green supplier selection via Multiple Criteria Data Envelopment Analysis

An appropriate supplier selection and its profound effects on increasing the competitive advantage of companies has been widely discussed in supply chain management (SCM) literature. By raising environmental awareness among companies and industries they attach more importance to sustainable and green activities in selection procedures of raw material providers. The current thesis benefits from data envelopment analysis (DEA) technique to evaluate the relative efficiency of suppliers in the presence of carbon dioxide (CO2) emission for green supplier selection. We incorporate the pollution of suppliers as an undesirable output into DEA. However, to do so, two conventional DEA model problems arise: the lack of the discrimination power among decision making units (DMUs) and flexibility of the inputs and outputs weights. To overcome these limitations, we use multiple criteria DEA (MCDEA) as one alternative. By applying MCDEA the number of suppliers which are identified as efficient will be decreased and will lead to a better ranking and selection of the suppliers. Besides, in order to compare the performance of the suppliers with an ideal supplier, a “virtual” best practice supplier is introduced. The presence of the ideal virtual supplier will also increase the discrimination power of the model for a better ranking of the suppliers. Therefore, a new MCDEA model is proposed to simultaneously handle undesirable outputs and virtual DMU. The developed model is applied for green supplier selection problem. A numerical example illustrates the applicability of the proposed model.

The leaves of green plants as well as a cyanobacterium, a red alga, and fungi contain insulin-like antigens

We report the detection of insulin-like antigens in a large range of species utilizing a modified ELISA plate assay and Western blotting. We tested the leaves or aerial parts of species of Rhodophyta (red alga), Bryophyta (mosses), Psilophyta (whisk ferns), Lycopodophyta (club mosses), Sphenopsida (horsetails), gymnosperms, and angiosperms, including monocots and dicots. We also studied species of fungi and a cyanobacterium, Spirulina maxima. The wide distribution of insulin-like antigens, which in some cases present the same electrophoretic mobility as bovine insulin, together with results recently published by us on the amino acid sequence of an insulin isolated from the seed coat of jack bean (Canavalia ensiformis) and from the developing fruits of cowpea (Vigna unguiculata), suggests that pathways depending on this hormone have been conserved through evolution.

Reporting of Green Supply Chain Management and Industrial Symbiosis

The purpose of this thesis is to examine how the reporting of operations related to green supply chain management and industrial symbiosis has evolved in UPM, Fortum and Kemira within the last ten years. The focus is on the improved operations, which are studied based on annual reports of these companies. The study provides a deeper understanding of the nature of green supply chain management and industrial symbiosis as well as the possibilites that their combination offers. The research is part of the DemaNET research project The study indicates that the environmental regulations and reporting standards have forced the studied companies to report their operations related to green supply chain management and industrial symbiosis more in detail during the last ten years. The operations related to green supply chain management in the studied companies are more common compared to operations related to industrial symbiosis. Often these two operations were also partially integrated, indicating a hybrid model. Even though firms often used hybrid models they still focused mainly on greening the internal operations rather than finding alternative ways for symbiosis outside the organization. The integration of green supply chain management and industrial symbiosis is most likely to occur when mutually beneficial relationships align the interests of all parties, thus resulting in the co-creation of value. The findings suggest that identifying mutual benefits and the flow of by-products are the ones that companies should give more attention to.

Green aspects study in game development

Context: Game development has become increasingly important in the software industry, but this importance has not affected the way software engineering approaches and methodologies manage the differences they have with game development. Similarly, software engineering does not fully support sustainability practices, causing this element to often not be considered or even known as a requirement for a development lifecycle. Goal: The aim of this thesis is to study the mode in which games are developed, and the involved sustainable aspects and the relevant concerns regarding the migration processes. Method: A quantitative study was conducted, gathering 33 answers of game professionals from four continents, from administrative (25%) and technical oriented positions (75%). Results: Three trends were observed: 1) Agile process models are used, 2) major concerns for mobile development and digital marketing, 3) minor concerns for eco-impact elements and certain development phases such as testing and crunch time development. Conclusion: Traditional Software engineering would require a major change on its processes and models to fit with modern agile development, game development approaches and sustainable requirements.

Green welding in practice

Efficient production and consumption of energy has become the top priority of national and international policies around the world. Manufacturing industries have to address the requirements of the government in relation to energy saving and ecologically sustainable products. These industries are also concerned with energy and material usage due to their rising costs. Therefore industries have to find solutions that can support environmental preservation yet maintain competitiveness in the market. Welding, a major manufacturing process, consumes a great deal of material and energy. It is a crucial process in improving a product’s life-cycle cost, strength, quality and reliability. Factors which lead to weld related inefficiencies have to be effectively managed, if industries are to meet their quality requirements and fulfil a high-volume production demand. Therefore it is important to consider some practical strategies in welding process for optimization of energy and material consumption. The main objective of this thesis is to explore the methods of minimizing the ecological footprint of the welding process and methods to effectively manage its material and energy usage in the welding process. The author has performed a critical review of the factors including improved weld power source efficiency, efficient weld techniques, newly developed weld materials, intelligent welding systems, weld safety measures and personnel training. The study lends strong support to the fact that the use of eco-friendly welding units and the quality weld joints obtained with minimum possible consumption of energy and materials should be the main directions of improvement in welding systems. The study concludes that, gradually implementing the practical strategies mentioned in this thesis would help the manufacturing industries to achieve on the following - reduced power consumption, enhanced power control and manipulation, increased deposition rate, reduced cycle time, reduced joint preparation time, reduced heat affected zones, reduced repair rates, improved joint properties, reduced post-weld operations, improved automation, improved sensing and control, avoiding hazardous conditions and reduced exposure of welder to potential hazards. These improvement can help in promotion of welding as a green manufacturing process.

Effect of supplementation of green tea polyphenols on the developmental competence of bovine oocytes in vitro

The objective of the present study was to examine the effect of green tea polyphenols (GTPs) supplementation during in vitro maturation, in vitro fertilization, and in vitro culture on the developmental competence of bovine oocytes. Cumulus-oocyte complexes aspirated from the ovaries were matured in vitro (38.5ºC for 24 h) and fertilized (38.5ºC for 15-18 h) and embryos were cultured (38.5ºC for 192 h) in a defined conditioned medium with or without GTPs supplementation. The GTPs used in the present study contained 99% catechin derivatives, with the major components being 50% (-)-epigallocatechin gallate, 22% (-)-epicatechin gallate, 18% (-)-epigallocatechin, and 10% (-)-epicatechin. Four replicate trials were done for each type of experiment. GTPs supplementation (15 µM) of the maturation medium led to a significant increase in the rate of blastocyst formation (34.0 vs 21.4%, P < 0.05). However, the rate of blastocyst formation was not improved when higher GTPs concentrations (20 or 25 µM) were added to the in vitro maturation medium. During in vitro fertilization, supplementation with higher GTPs concentrations (20 or 25 µM) significantly reduced the rate of blastocyst formation (P < 0.05). Supplementation of the culture medium with 15 µM GTPs improved the rate of blastocyst formation, while higher GTPs concentrations (25 µM) significantly reduced embryo development (P < 0.05). In conclusion, these results demonstrate that supplementation with GTPs at low concentration (15 µM) during in vitro maturation and in vitro culture improved the developmental competence of bovine oocytes.

Ochratoxin A in Brazilian green coffee

Ochratoxin A is a nephrotoxic, teratogenic and imunotoxic compound produced by Aspergillus and Penicillium spp. It is a suspected carcinogen to humans and it is carcinogenic to rats. Recently it has drawn attention because it has been found in coffee and it has been the object of regulation by coffee importing countries. Brazil is the largest coffee producing country and its largest consumer. In order to conduct an initial assessment of the situation of the coffee produced in the country and offered to its population, one hundred and thirty two samples of Brazilian green coffee from 5 producing states (Minas Gerais, Paraná, São Paulo, Espírito Santo and Bahia) and destined for the home market, were collected at sales points at the cities of Londrina and Santos, Brazil, and analyzed for ochratoxin A. The toxin was isolated in immunoaffinity columns and quantified by HPLC with florescence detection. The limit of detection was 0.7ng/g and the average RSD for duplicates of the samples was 11%. Twenty seven samples were found contaminated with the toxin and the average concentration for the contaminated samples was 7.1ng/g ochratoxin A. Neither the total number of defects nor the number of specific defects according to the Brazilian coffee classification system (black, partly -- black, sour, stinkers-black, stinkers-green, pod beans) showed any relation to the contamination of the samples with ochratoxin A.

Survey on ochratoxin A in Brazilian green coffee destined for exports

The presence of ochratoxin A (OTA) in foods has led some countries to establish regulatory limits. Although coffee is not a major source of OTA in human consumption, the European Community (EC) may establish limits in the near future, with possible economic impact on producing countries. This study measured the OTA content with HPLC in 37 samples of Brazilian green coffee exclusive destined to the export market and also verified a possible relation between coffee defects and OTA content. The results showed an OTA concentration ranging from < 0.16ng/g (detection limit) to 6.24ng/g (average of 3.20ng/g) for 37 samples. Of the five samples observed for defects, toxin content of sound beans ranged from 0.22 to 0.80ng/g (average 0.46ng/g) and of defective beans from 0.42 to 17.46 (average 4.52ng/g). Morphological differences among sound and defective beans showed no susceptibility for mould invasion under optical microscopy observation. One black bean depicted the presence of mould and spores on observation under Scanning Electron Microscope (SEM). According to this investigation, Brazilian green coffee for export complies with most limits in place.

Shelf life of minimally processed carrot and green pepper

The postharvest losses of horticultural products justify the use of preservation techniques. The processing not only adds value to the products, but also makes the products more convenient to the consumers. The objective of this research was to define the methodologies for the minimal processing of carrot and green pepper as to the type and intensity of the adoption of conservation techniques, and to monitor the products after processing through microbiological, physicochemical and nutritional analysis. The vegetables were washed and they were immersed in cold (7ºC) water with 100 mg L-1 free chlorine for sanitation, followed by centrifugation for 5 min. The product was put into BOPP/LDPE (biaxially orientated polypropylene/low-density polyethylene) plastic bags, which were sealed under atmospheric air, vacuum and modified atmosphere (2% O2, 10% CO2, 88% N2) and stored at 1ºC±1ºC. The approximate composition of the vegetables stayed stable during the storage period, in the three tested treatments. The contents of vitamin C for the samples of minimally processed carrot and green pepper did not present differences among treatments. The contents of beta-carotene decreased slightly during the storage period for the minimally processed carrot and green pepper. After processing, carrot and green pepper had psychrotrophic counts of 10²-10(5) and 10³-10(6) CFU g-1, respectively. Anaerobic mesophiles and total coliforms were found in green peppers, representing 1.6x10³ - 7.4x10(5) and <10.g-1 - 7.4x10(5), respectively. Total and fecal coliforms, anaerobic mesophiles and Salmonella were not found in carrots. Salmonella was not found in green pepper.

Implementing Green IT approach for transferring Big Data over Parallel Data Link

The whole research of the current Master Thesis project is related to Big Data transfer over Parallel Data Link and my main objective is to assist the Saint-Petersburg National Research University ITMO research team to accomplish this project and apply Green IT methods for the data transfer system. The goal of the team is to transfer Big Data by using parallel data links with SDN Openflow approach. My task as a team member was to compare existing data transfer applications in case to verify which results the highest data transfer speed in which occasions and explain the reasons. In the context of this thesis work a comparison between 5 different utilities was done, which including Fast Data Transfer (FDT), BBCP, BBFTP, GridFTP, and FTS3. A number of scripts where developed which consist of creating random binary data to be incompressible to have fair comparison between utilities, execute the Utilities with specified parameters, create log files, results, system parameters, and plot graphs to compare the results. Transferring such an enormous variety of data can take a long time, and hence, the necessity appears to reduce the energy consumption to make them greener. In the context of Green IT approach, our team used Cloud Computing infrastructure called OpenStack. It’s more efficient to allocated specific amount of hardware resources to test different scenarios rather than using the whole resources from our testbed. Testing our implementation with OpenStack infrastructure results that the virtual channel does not consist of any traffic and we can achieve the highest possible throughput. After receiving the final results we are in place to identify which utilities produce faster data transfer in different scenarios with specific TCP parameters and we can use them in real network data links.

Benchmark of routing protocols regarding green considerations

In Mobile Ad-hoc Networks (MANET) the participating nodes have several roles such as sender, receiver and router. Hence there is a lot of energy consumed by the nodes for the normal working of the network since each node has many different roles. Also in MANET the nodes keep moving constantly and this in turn consumes a lot of energy. Since battery capacity of these nodes is limited it fails to fulfil the high demand of energy. The scarcity of energy makes the energy conservation in mobile ad-hoc networks an important concern. There is several research carried out on the energy consumption of mobile ad-hoc networks these days. Some of this research suggests sleep mode, transmission power control, load balancing etc. In this thesis, we are comparing various proposed energy efficient models for some of the ad-hoc protocols. We compare different energy efficient models for Optimised Linked State Algorithm (OLSR) and Ad-hoc On Demand Distance Vector (AODV). The routing protocols are compared for different parameters such as average remaining energy, number of nodes alive, payload data received and performance with different mobility speed. The simulation results helps in benchmarking the various energy efficient routing models for OLSR and AODV protocols. The benchmarking of the routing protocols can be based on many factors but this thesis concentrates on benchmarking the MANET routing protocols mainly based on the energy efficiency and increased network lifetime.

Green Service Level Agreement under Sustainability Lens in IT Industry

Nowadays, when most of the business are moving forward to sustainability by providing or getting different services from different vendors, Service Level Agreement (SLA) becomes very important for both the business providers/vendors and as well as for users/customers. There are many ways to inform users/customers about various services with its inherent execution functionalities and even non-functional/Quality of Services (QoS) aspects through negotiating, evaluating or monitoring SLAs. However, these traditional SLA actually do not cover eco-efficient green issues or IT ethics issues for sustainability. That is why green SLA (GSLA) should come into play. GSLA is a formal agreement incorporating all the traditional commitments as well as green issues and ethics issues in IT business sectors. GSLA research would survey on different traditional SLA parameters for various services like as network, compute, storage and multimedia in IT business areas. At the same time, this survey could focus on finding the gaps and incorporation of these traditional SLA parameters with green issues for all these mentioned services. This research is mainly points on integration of green parameters in existing SLAs, defining GSLA with new green performance indicators and their measurable units. Finally, a GSLA template could define compiling all the green indicators such as recycling, radio-wave, toxic material usage, obsolescence indication, ICT product life cycles, energy cost etc for sustainable development. Moreover, people’s interaction and IT ethics issues such as security and privacy, user satisfaction, intellectual property right, user reliability, confidentiality etc could also need to add for proposing a new GSLA. However, integration of new and existing performance indicators in the proposed GSLA for sustainable development could be difficult for ICT engineers. Therefore, this research also discovers the management complexity of proposed green SLA through designing a general informational model and analyses of all the relationships, dependencies and effects between various newly identified services under sustainability pillars. However, sustainability could only be achieved through proper implementation of newly proposed GSLA, which largely depends on monitoring the performance of the green indicators. Therefore, this research focuses on monitoring and evaluating phase of GSLA indicators through the interactions with traditional basic SLA indicators, which would help to achieve proper implementation of future GSLA. Finally, this newly proposed GSLA informational model and monitoring aspects could definitely help different service providers/vendors to design their future business strategy in this new transitional sustainable society.

Green ICT metrics and Biomimicry

Sustainability issue of ICT have gathered attention in recent years, and researchers are working on this problem. Sustainability incorporates numerous interconnected aspects as well as methods to achieve it in ICT, so it is quite complicated to have a general view on a problem without a proper framework. However, a general methodology for such a research is missing. In this work it is proposed to use Biomimicry approach as a framework for sustainability research and development, as it introduces systematics and also forces to account sustainable aspects. Additionally, an interesting problem of green network measurements for enhancing sustainability in ICT will be researched using mentioned approach. The goal is to investigate Biomimicry as a systemic approach for developing sustainable systems, as well as to apply it in green network measurements study. Comparative study is performed for examining Biomimicry approach, as well as a use case of green network measurements research is presented. As a result, green network measurement can potentially improve sustainability, but only to a limited extent as it cannot incorporate all the aspects; within Biomimicry approach, two methodologies exist. It is possible to conclude that Biomimicry is a good framework for developing sustainable systems, nevertheless, another methodology has to be introduced within it; new methodology has to incorporate advantages of two existing ones.

“Good night, dear Lake of Shining Waters”. Luonto L. M. Montgomeryn Anne of Green Gables –teoksessa

Kanadalaisen kirjailijan L. M. Montgomeryn tunnetun ja rakastetun Anna-sarjan ensimmäinen osa Anne of Green Gables -teos (1908) kertoo orvosta tytöstä, joka pääsee Prinssi Edwardin saaren Avonlean kylään asumaan naimattoman sisarusparin Marilla ja Matthew`n kasvattilapseksi. Luonto on keskeisellä sijalla teoksessa: Anna on luontoa rakastava ja luonnon keskellä viihtyvä tyttö ja myös teoksen kertoja kuvaa paljon luontoa. Tutkimukseni käsittelee luontoa Anne of Green Gables -teoksessa. Tutkin luontoteemaa teoksessa seuraavista näkökulmista: Analysoin, kuinka luonto kuvataan teoksessa ja millainen on teoksen luontokuva. Luontokuvaa käsittelen pastoraalin käsitteen kautta, ja kysyn teokselta, voidaanko se tulkita pastoraaliksi ja kuinka teos asettuu pastoraalin traditioon. Lisäksi erittelen, millainen on päähenkilön Annan luontosuhde. Millaisen arvon hän antaa luonnolle ja mitä merkityksiä hän liittää luontoon? Tutkimus asettuu ekokriittiseen viitekehykseen, ja pohdin myös sitä, minkälainen on teoksen representaatio luonnosta ekokriittisesti tarkastellen. Amerikkalaisen transsendentalistin Ralph Waldo Emersonin luontofilosofia kulkee myös taustajuonteena tutkielmassa ja erittelen, mitä yhtymäkohtia hänen luontofilosofiassaan on Anne of Green Gables -teokseen. Anne of Green Gables -teoksen luontokuvaa voidaan luonnehtia romantisoiduksi ja idealisoivaksi. Luonto kuvataan kauniiksi, ja sen kauneutta ylistää niin Anna kuin teoksen kaikkitietävä kertojakin. Teoksen luontokuva on pastoraalinen, sillä siinä esiintyy vahvasti pastoraaliin liittyvä diskurssi maaseudun ja kaupungin vastakkainasettelusta siten, että maaseutu assosioituu positiivisesti, kun taas kaupunki nähdään negatiivisessa valossa. Luonnonläheinen Avonlean kylä näyttäytyy teoksessa niin idealisoidussa valossa, että se muistuttaa jo jonkinlaista myyttistä paratiisia. Näin ollen teoksen pastoraalisuus saa pejoratiivisiakin piirteitä. Annan luontosuhdetta värittää voimakas kunnioitus ja arvostus luontoa kohtaan. Hänen luontoon liittämistä arvoista keskeiselle sijalle nousee luonnon kauneus. Luonnon kauneuden arvostaminen toimii kuitenkin porttina luonnon toiseuttamiseen, mistä syntyy pieni arvoristiriita. Toisaalta kuitenkin Anna samaistuu luontoon tavalla, joka hämärtää perinteistä subjekti–objekti-dikotomiaa. Anna näyttäytyy vihreän maailman arkkityyppinä, lapsena, joka sulautuu luontoon ja kokee sen kodikseen. Luonto edustaa Annalle vapautta ja herättää myös hänen mielikuvituksena ja taiteellisen inspiraation. Lisäksi luonto on Annalle paikka, jossa voi saavuttaa autenttisen yhteyden Jumalaan.